Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Conformance Certification

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive final inspection and testing of components to ensure dimensional accuracy meeting Class 3A and 3B thread specifications, strict adherence to material compliance standards, and full alignment with established quality systems. All deliverables must be verified through rigorous inspection protocols and supported by a Certificate of Conformance issued in accordance with either MIL-STD-1916 or ASQ Z1.4 standards, ensuring traceability and regulatory alignment. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, under the oversight of the Department of Defense’s Aviation Supply Chain office. This is a subcontract opportunity classified under NAICS code 541330 and was posted on August 3, 2026, with a response deadline of August 11, 2026. The solicitation is open for competitive bidding through the DIBBS platform, and all participants must provide documented evidence of their ability to meet the technical, material, and quality assurance requirements outlined. No set-aside designation has been specified, and the contract is expected to involve high-precision manufacturing scrutiny with full compliance obligations tied to defense industry standards.

General Info

Final inspection and testing of components to Class 3A/3B specs with MIL-STD-1916 or ASQ Z1.4 certification in New Cumberland, PA.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform final inspection and testing for dimensional accuracy (Class 3A/3B threads), material compliance, and quality system adherence; provide Certificate of Conformance per MIL-STD-1916 or ASQ Z1.4.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Structural Engineering Design for Marine Davit InstallationThe contract requires comprehensive structural engineering design services for the installation of a Viking Norsafe E-60 Conventional Lifeboat Davit at Pier 7, encompassing all phases from load analysis and foundation evaluation to reinforcement design and final documentation. The engineering deliverables must include stamped drawings and a detailed bill of materials, ensuring compliance with applicable structural and marine safety standards. The scope demands precise analysis of existing pier conditions to confirm structural integrity and determine necessary modifications to safely support the davit system under operational and environmental loads. This is a subcontract opportunity classified under NAICS code 541330 for engineering services, reserved exclusively for small business categories including SBA-certified small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, and is administered by Tongue Point Job Corps, though no physical address or point of contact details are provided. The work is to be performed at Pier 7, with all deliverables subject to approval and alignment with the client’s operational and safety protocols for marine infrastructure.

Tongue Point Job Corps

POSTED

about 11 hours ago

DEADLINE

System Testing, Commissioning, and DocumentationThe contract requires the performance of NFPA 72-compliant testing, commissioning, and detailed documentation for fire alarm and detection systems, ensuring all components meet applicable fire safety standards. A Record of Completion must be submitted as part of the deliverables to certify that all system functions have been properly verified and documented in accordance with regulatory requirements. The work is to be conducted at the Earle C. Clements Job Corps Center, though specific location details are not provided, and the project supports critical life safety infrastructure for the facility. This is a subcontract opportunity reserved exclusively for small business categories under SBA set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code 541330 indicates the work falls under engineering services, and the response deadline is August 10, 2026, with the solicitation posted on August 4, 2026. The opportunity is accessible via the SBA’s online portal for federal contracting opportunities.

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Testing, Adjusting, and Balancing (TAB) ServicesThe contract requires the performance of Testing, Adjusting, and Balancing (TAB) services on existing hot water circulation pumps to ensure they operate in alignment with the system’s design specifications. This work is critical to optimizing heating efficiency, maintaining proper flow rates, and ensuring system reliability across the facility. The task involves comprehensive diagnostic evaluation, calibration, and fine-tuning of the pumps to meet established performance benchmarks, with adjustments made to accommodate the building’s hydraulic and thermal load requirements. The contract is classified as a subcontract under the SBA’s small business set-aside programs, which include eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It falls under NAICS code 541330 for Engineering Services and is issued by Serrato Corporation DBA Flint Hills Job Corps. Respondents must submit proposals by the deadline of August 13, 2026, though no specific location for performance is provided in the data, and no point of contact details are available. The posting date indicates this opportunity was made public on August 4, 2026, and the solicitation link directs to a federal opportunity portal for further administrative details.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 11 hours ago

DEADLINE

Factory-Certified Boiler Start-Up and CommissioningThe contract requires factory-certified start-up and commissioning of boiler control systems, encompassing circulation pumps, sensors, and reset controls, ensuring full operational compliance with manufacturer standards. All work must be performed by certified technicians authorized by the boiler equipment manufacturer to validate system integrity and performance post-installation. This is a subcontract under a small business set-aside designation, open to SBA-recognized categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541330 categorizes this as professional, scientific, and technical services related to engineering. The solicitation was posted on August 4, 2026, with a response deadline of August 13, 2026, and the performance location is managed by Serrato Corporation DBA Flint Hills Job Corps, though specific site details are not provided.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 11 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California. The project requires professional services such as engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, with a focus on engaging disadvantaged, small, women-owned, minority-owned, and veteran-owned businesses. The solicitation prioritizes participants certified under various set-aside programs including DBE, SBE, WBE, MBE, SDB, WOSB, VOSB, and SDVOSB, aligned with SBA and Department of Transportation guidelines. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 PM PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at charles.brown@ghd.com, and the NAICS code associated with the work is 541330 for architectural and engineering services.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

This contract is a fee-for-service solicitation issued by Management & Training Corporation (MTC) on behalf of the Tongue Point Job Corps Center in Astoria, Oregon, for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7. The scope of work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials to support the installation, with deliverables including electronic PDF copies and one full-size printed drawing set. The contract is classified under NAICS code 541330 for Engineering Services with a size standard of $9 million and is set aside exclusively for small business, small disadvantaged business, women-owned small business, HUBZone small business, veteran-owned small business, and service-disabled veteran-owned small business concerns. All subcontractors must self-certify their business category, possess a Unique Entity Identifier (UEI), provide a valid Taxpayer Identification Number, and disclose debarment status if their subcontract exceeds $30,000. The contractor must comply with Service Contract Labor Standards, pay at least the federal contractor minimum wage as mandated by Executive Order 13658, and adhere to Wage Determination SCA WD 2015-5577 Rev. 28. The contract includes stringent data protection obligations requiring compliance with DOL and federal data privacy guidelines, including encryption of personally identifiable information, reporting of any breach to the Department of Labor within one hour of discovery, and a prohibition on retaining or disseminating any deliverables containing Privacy Act or FOIA-exempt data. The contractor is required to submit proposals via email to Elizabeth Williamson at Williamson.elizabeth@jobcorps.org by 2:00 PM PST on August 6, 2024, and must include a completed bid sheet, W-9 form, self-certification form, and acceptance of MTC’s terms and conditions. Invoices must be submitted to MTC’s corporate office in Centerville, Utah, and must contain the purchase order number, dates of service, itemized pricing with extended unit rates and totals, and invoice number and date. Payment is conditioned upon delivery and acceptance of services. The contractor must also indemnify MTC against all claims arising from their performance, negligence, or breach of contract, though insurance is not required for this project. Termination is permitted by either party with thirty days’ written notice, or immediately if funding is withdrawn.

Tongue Point Job Corps

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves replacing an existing groundwater production well with a new 24-inch diameter stainless steel Ful-Flo louvered well screen, matching existing vertical turbine equipment and integrating discharge piping into the Corydon Blend station and Malaga blending location, in full compliance with AWWA, SWRCB, DWR, and EVMWD standards. Services encompass structural, geotechnical, architectural, noise, survey, corrosion, and potholing engineering, delivered in two distinct phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and well abandonment, bid assistance, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, mechanical, electrical, instrumentation, and controls design for equipment, testing, and commissioning. The contract requires submission of a detailed cost proposal broken down by task, with total estimated project costs at $2,260,788 including $2 million in construction costs and a negotiable not-to-exceed professional services fee. Proposals must adhere to strict format requirements, including a cover letter, demonstrable project experience, resumes of primary staff and subconsultants, three references, and a comprehensive scope of work. Key attachments include Exhibit B for the Schedule of Services, Exhibit C for compensation rates, and Attachment 2 which mandates completion of certifications for American Iron and Steel compliance, lobbying, debarment/suspension, SAM information, DBE subconsultant disclosures, Executive Order N-6-22, conflict of interest, insurance acknowledgment, and public works registration. All proposers must be certified DBEs and submit comprehensive data on any DBE subconsultants used, including certification numbers and justifications for non-selection. The evaluation process prioritizes relevant qualifications and experience (25%), followed by understanding of the project and technical approach (25%), scope and schedule (20%), innovation (10%), cost and value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest cost. Mandatory compliance requirements include adherence to the Build America Buy America Act, prohibition of covered telecommunications equipment from Huawei or ZTE, sanctions compliance under Executive Order N-6-22

Ardurra Group, Inc.

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction to replace an existing water well in Lake Elsinore, Riverside County, California. The contract, identified as C2305, is solicited by AKM Consulting Engineers and is classified under NAICS code 541330 for architectural and engineering services. The project emphasizes the involvement of Disadvantaged Business Enterprises as part of a transportation department set-aside, encouraging participation from underrepresented firms. Key deliverables include comprehensive design work, assistance with the procurement and bidding process, and ongoing engineering oversight throughout construction to ensure compliance, quality control, and timely completion. The official response deadline is September 1, 2026, with primary point of contact being Katie Neubauer of AKM Consulting Engineers, reachable via phone or email for inquiries. All project details and opportunities are accessible through the SBA’s opportunity portal.

AKM Consulting Engineers

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The project is divided into two phases: Phase 1 focuses on the design of the new well and abandonment of the old one according to Riverside County and California State Water Resources Control Board standards, including technical specifications, civil site design, line-bid items, bidding support, and full-time construction management and hydrogeological oversight during drilling; Phase 2 covers the engineering design for well equipping, including architectural, civil, mechanical, structural, electrical, and instrumentation and controls systems for testing and commissioning, with ongoing engineering support during construction. The well casing must be 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing casing depth, with sanitary seal placement compliant with AWWA standards. All work must adhere to Build America, Buy America Act requirements, including documentation of domestic content for iron, steel, and manufactured products, and compliance with federal procurement rules under 2 CFR Part 184. The project is funded in part by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, triggering full compliance with Title 2 CFR Part 200, including debarment and suspension rules, lobbying restrictions under the Byrd Act, Clean Air Act and Clean Water Act subrecipient clauses applicable to subcontracts over $150,000, and procurement of recovered materials when purchases exceed $10,000. The Consultant must provide comprehensive services including hydrogeological analysis, borehole geophysics, geotechnical investigation, water quality sampling, environmental permitting with SWRCB coordination, civil and structural engineering, utility coordination, topographic and boundary surveying, construction inspection, QA/QC, and community outreach. All key personnel must be identified with resumes, professional licenses, and certification details, and the firm must demonstrate experience with municipal groundwater projects and public agency collaboration. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a not-to-exceed limit anticipated of $1,000,000. The contract requires monthly invoicing with progress reports, adherence to a 45-day payment term, and records retention for four years post-final payment. The Consultant must comply with the EVMWD

GEI Consultants, Inc.

POSTED

about 11 hours ago

DEADLINE

Request for Proposals for Professional Engineering Staff Augmentation Services

Solicitation # RFP 130-13479

Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.

Grant County PUD

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting and Compliance SupportThe contract seeks administrative support to ensure compliance with Federal Acquisition Regulation clauses related to small business subcontracting representation and the implementation of accelerated payments to small business subcontractors. The work involves providing guidance and operational assistance to uphold reporting obligations, verify subcontractor eligibility, and facilitate timely financial disbursements in accordance with federal mandates. This support is critical for maintaining regulatory adherence and fostering equitable participation by small businesses within the supply chain. Performance of the services is centered in Tracy, California, with the procurement categorized under NAICS code 541611 for management consulting services. The solicitation is posted under the Department of Defense’s Aviation Supply Chain initiative, and responses are due by August 11, 2026. While no specific set-aside designation is indicated, the focus on small business compliance underscores the intent to prioritize and empower small business subcontractors across Defense-related operations. The contract will require detailed records management, coordination with subcontractors, and alignment with evolving federal procurement standards to ensure full compliance and payment efficiency.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Domestic and International Freight / Transportation ServicesThe contract specifies the transportation of finished grommets from origin to destination, with strict compliance required for ocean shipments using U.S.-flag vessels or timely processing of any applicable waivers. It falls under the NAICS code 484220, indicating it pertains to truck transportation of freight, although it encompasses both domestic and international logistics. The place of performance is identified as Tracy, California, with a zip code of 95304-5000, suggesting that while shipments may begin or end elsewhere, operational oversight and key delivery points are centered in this location. The contract is classified as a subcontract and was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a narrow window for bids and submissions. The contracting entity is the Aviation Supply Chain under the Department of Defense, emphasizing the defense-related nature of the logistics involved and the critical need for adherence to regulatory and security standards throughout the supply chain.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Packaging and Labeling Services for Defense LogisticsThe contract requires comprehensive packaging and labeling services for nonmetallic grommets in strict compliance with MIL-STD-2073-1E standards, ensuring all hazardous materials are clearly marked with appropriate warnings and unitized for FOB origin shipment. All packaging must meet military specifications for durability, protection during transit, and proper identification, with special attention to hazard communication to safeguard handling personnel and ensure regulatory adherence. The work is designated as a subcontract under NAICS code 561910, indicating it falls under other support services for transportation, and is part of a Defense Logistics initiative managed by the Aviation Supply Chain under the Department of Defense. The offer deadline for responses is August 11, 2026, with the solicitation posted on August 3, 2026, and performance tied to the specified place of performance in Tracy, California, with a ZIP code of 95304-5000. The contract is not subject to any set-aside provisions and is accessible through the DIBBS portal for interested parties. No point of contact information is provided, suggesting inquiries must be directed through the official solicitation channel at the linked DIBBS webpage. All deliverables must conform to the referenced military standard without deviation, emphasizing precision in labeling, unitization, and compliance with DoD logistics protocols.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Nonmetallic Grommet Manufacturing and AssemblyThe contract seeks a subcontractor to manufacture nonmetallic grommets compliant with military specifications, covering the full production cycle from material sourcing and molding to finishing and rigorous quality control processes. All components must meet exacting defense standards, ensuring durability, precision, and reliability under demanding operational conditions. Performance is required at a designated location in Tracy, California, with the zip code 95304-5000 designated as the place of performance. The solicitation, classified under NAICS code 339999 for other miscellaneous manufacturing, is issued by the Department of Defense through its Aviation Supply Chain office and is structured as a subcontract opportunity. Responses must be submitted by August 11, 2026, with the request posted on August 3, 2026, providing a limited window for interested parties to prepare compliant proposals. The contract emphasizes adherence to military-grade requirements throughout all stages of production, with no set-aside designation specified, making it open to qualified suppliers regardless of business size or ownership structure.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Stud Assemblies with Turnlock FastenersThe contract requires the manufacture, quality control, packaging, and delivery of stud assemblies incorporating turnlock fasteners, all to meet rigorous military standards for labeling, preservation, and hazardous materials handling. The work must ensure full compliance with defense specifications throughout every phase of production, from initial fabrication to final inspection and shipment. The place of performance is designated as Tracy, California, with the zip code 95304-5000, indicating the physical location where deliverables must be prepared and rendered. This is a subcontract under the NAICS code 332510, classified under the Aviation Supply Chain within the Department of Defense, and the response deadline is August 11, 2026. The solicitation is open for qualified subcontractors capable of meeting high-volume, precision manufacturing demands with strict adherence to military-grade quality and safety protocols. All components must be properly documented, preserved against corrosion and environmental degradation, and labeled in accordance with federal defense regulations. The offeror must possess the technical and logistical capability to ensure end-to-end compliance, with delivery timelines aligned to mission-critical aviation supply chain requirements.

Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, and unitization services strictly aligned with MIL-STD-129 and ASTM D3951 standards, ensuring all military cargo is properly prepared for transport, storage, and handling. This includes the application of hazard warning labels in full compliance with OSHA 29 CFR 1910.1200 for any materials classified as hazardous, necessitating accurate chemical identification, pictograms, signal words, and precautionary statements. All unitization must be performed to enable efficient palletization and logistical handling within Defense Department supply chains, with attention to durability, identification clarity, and regulatory adherence throughout the packaging lifecycle. Performed at the designated place of performance in New Cumberland, Pennsylvania, 17070-5002, the obligation falls under NAICS code 493190 for other support activities for transportation and is structured as a subcontract opportunity issued by the Aviation Supply Chain within the Department of Defense. The solicitation opened on August 3, 2026, with responses due by August 11, 2026, and participation is open without specific set-aside restrictions. Interested parties must review the full requirements via the official DIBBS portal to ensure full compliance with technical, administrative, and safety specifications before submitting proposals.

Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

Precision Fastener Manufacturing – Close Tolerance Bolt (NAS6604-128)The contract calls for the manufacture and delivery of 30 precision close-tolerance bolts designated as NAS6604-128 with the National Stock Number 5306-01-508-6784, all of which must comply with the NAS6603–NAS6620 Rev 11 specification, including Class 3A/3B thread tolerances and MIL-STD-130N marking standards. The work requires strict adherence to dimensional and surface finish requirements to ensure compatibility and performance in high-stress aerospace or defense applications. Production must be executed to exacting quality controls, and each unit must be properly identified with permanent, legible markings as defined by the military standard. The solicitation is structured as a subcontract under the Department of Defense’s Aviation Supply Chain and is set to close for responses on August 11, 2026, with the posting date listed as August 3, 2026. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the delivery point and likely the site of final inspection or integration. The NAICS code 332112 confirms this falls under the category of screw, nut, and bolt manufacturing. There is no set-aside designation listed, meaning the contract is open to all qualified vendors without preference for small, minority, or veteran-owned businesses. All bids must be submitted through the DIBBS portal prior to the deadline.

Nonferrous Forging

POSTED

about 22 hours ago

DEADLINE

Military-Grade Packaging, Marking, and Labeling ServicesThe contract requires the provision of military-grade packaging, preservation, and labeling services for shaft assemblies in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. This includes all aspects of protective packaging to ensure durability during storage and transport, proper preservation methods to prevent corrosion and degradation, and accurate labeling with mandatory barcoding and documentation as prescribed by federal military specifications. All work must support full traceability and readiness for immediate shipment and integration into defense logistics systems. The solicitation is classified as a subcontract under NAICS code 493190 and is issued by the Department of Defense through the Aviation Supply Chain organization. Responses must be submitted by August 10, 2026, with the solicitation posted on August 3, 2026. The place of performance and point of contact details are not specified, but the work must be executed to meet exacting military requirements for readiness and compliance. The full solicitation can be accessed via the provided DIBBS link for detailed terms and submission guidelines.

Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

Defense-Compliant Cybersecurity & CMMC Assessment SupportThe contract seeks support for achieving and maintaining CMMC Level 2 compliance within the aviation supply chain, specifically focusing on the self-assessment process, implementation of DFARS 252.204-7003 security controls, and continuous monitoring to protect Controlled Unclassified Information. The scope requires expertise in identifying gaps in current cybersecurity posture, deploying technical and administrative safeguards aligned with NIST SP 800-171, and establishing ongoing processes to ensure sustained compliance with federal cybersecurity requirements for defense contractors. This subcontract is under the Department of Defense, targeting organizations within the aviation supply chain that handle CUI and must meet stringent DOD cybersecurity standards. The solicitation period closes on August 10, 2026, and the work is tied to NAICS code 541512, indicating it involves computer systems design and related services. The place of performance is unspecified, but the nature of the work implies direct engagement with defense contractors or subcontractors operating in the aviation sector, requiring rigorous documentation, audit readiness, and real-time compliance tracking without reliance on third-party certification at this stage.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

Quality Assurance & Inspection Services for Aerospace ComponentsThe contract requires independent third-party inspection and quality verification services for aerospace shaft assemblies, ensuring strict adherence to MIL-STD-1916 standards and specified verification levels VII, IV, and II, along with corresponding AQL thresholds of 0.1, 1.0, and 4.0 to validate product conformance and reliability. These inspections are critical to maintaining defense-grade quality and must be performed by certified external entities with demonstrated expertise in military and aerospace component evaluation. This subcontract, categorized under NAICS code 541330, is issued by the Department of Defense through the Aviation Supply Chain organization. It was posted on August 3, 2026, with a response deadline of August 10, 2026, and is accessible via the DIBBS platform. The work is to be conducted in support of U.S. military aerospace systems, with performance scope not tied to a specific geographic location, and must be executed in alignment with federally mandated quality control protocols. No set-aside provisions apply, and all qualified vendors must respond by the deadline to be considered.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Shaft Assembly, Output – Reconditioned Aircraft Component ManufacturingThe contract requires the manufacture, reconditioning, testing, and delivery of 662 Output Shaft Assemblies identified by NSN 2925-01-179-2648, all of which must meet stringent military specifications to ensure performance, durability, and interoperability within defense systems. The work encompasses full lifecycle handling of these components including inspection, restoration to original standards, functional testing, and packaging in compliance with military logistics and safety protocols. Special attention is required in the handling of surplus government property, ensuring that all returned or degraded parts are managed responsibly and that no unauthorized materials enter the supply chain. The solicitation is issued as a subcontract under the NAICS code 336413 which corresponds to Aircraft Engine and Engine Parts Manufacturing, indicating the technical precision and specialized capabilities demanded of the contractor. The posting date is August 3, 2026, with a response deadline of August 10, 2026, setting a tight window for qualified parties to submit proposals. Performance will be executed under the auspices of the Department of Defense’s Aviation Supply Chain, with the work scope centered on maintaining readiness and operational capability for critical aircraft systems. Compliance with quality assurance standards, traceability, and documentation throughout every phase of production is mandatory to satisfy defense procurement requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Quality Inspection and Sampling ServicesThe contract requires strict adherence to military and industry standards for quality inspection and sampling, specifically employing MIL-STD-105E or ANSI/ASQ Z1.4 procedures to evaluate product conformity. Inspection criteria are defined by specified AQLs—0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects—with an absolute requirement of zero non-conformances for any critical defects, ensuring the highest level of product reliability and safety. All sampling and inspection activities must be executed with precision to meet these thresholds, particularly in environments where failure could have severe operational consequences. The work is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is solicited by the Department of Defense through its Aviation Supply Chain office. The solicitation was posted on August 3, 2026, with proposals due by August 11, 2026, and performance is expected to support aerospace or defense-related systems where quality control is mission-critical. While specific location details are not provided, the nature of the work suggests it will be performed at facilities tied to defense manufacturing or logistics operations under the oversight of the DoD.

Engineering Services

POSTED

about 22 hours ago

DEADLINE