Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RACK, ELECTRICAL EQU

Active
SPE4A0-26-T-4249Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one electrical equipment rack, identified by NSN 5975-01-675-4818 and Boeing part number 284T1712-306. The item is designated as a critical application item and requires FAA airworthiness approval and certification of conformance. The contractor must adhere to strict supply chain traceability documentation and follow specific DLA packaging, preservation, and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. The delivery is set for Altus AFB, Oklahoma, with a required delivery date of August 3, 2026, and a delivery window of five days after order. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order. All technical and quality requirements are governed by the DLA Master List and associated Technical Data Packages.

General Info

Procurement of one electrical equipment rack for Altus AFB by August 3, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

327110 - Pottery, Ceramics, and Plumbing Fixture ManufacturingView NAICS

Place of Performance

717 S 1ST ST BLDG 394, ALTUS AFB, OK, 73523-5108, USA

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4249.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RACK,ELECTRICAL EQU
RACK,ELECTRICAL EQU
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ046: FAA Bare Item Marking Requirements RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
SPE4A0-26-T-4249
SECTION B
CERTICICATE OF AIRWORTHINESS AND CONFORMANCE FOR FAA CERTIFIED PARTS AND
COMMERCIAL DERIVATIVE AIRCRAFT PARTS.
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
THE PRODUCT SPECIALIST SHOULD ADD NOTE "REFER TO PROC NOTE L32 FOR HIGHER-LEVEL QUALITY REQUIREMENTS" TO THE POT IN LIEU OF ANY HIGHER-LEVEL QUALITY STO.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 284T1712-306
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-19240 REVISION NR DTD 08/27/2019 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017719847 0001 EA 1.000
NSN/MATERIAL:5975016754818
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4419
SPE4A0-26-T-4249
SECTION B
PR: 7017719847 PRLI: 0001 CONT’D
FB4419 97 LRS LGRD
CP 580 481 6223
717 S 1ST ST BLDG 394
ALTUS AFB OK 73523-5108
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4419
FB4419 97 LRS LGRD
CP 580 481 6223
717 S 1ST ST BLDG 394
ALTUS AFB OK 73523
US
M/F: (TCN) FB44196211B004
RDD: N1A
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A0-26-T-4249 NSN/Part Number: 5975-01-675-4818 Quantity: 1 EA Purchase Request: 7017719847QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327110
New
DIBBS
LOOM, CORRUGATED, SPL
Solicitation # SPE4A7-26-T-639Y
This contract is for the procurement of 84 feet of special corrugated loom, identified by NSN 5975-01-544-1766. The material must be supplied as one continuous length on a spool or reel and delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after the order, with a required delivery date of March 4, 2027, and a shipping need date of February 7, 2027. The agreement specifies a quantity variance of plus or minus 10 percent and requires adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance will occur at the destination. The contract also incorporates DLA master lists of technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 327110
New
Federal
INSULATOR IDIQThe Western Area Power Administration, under the Department of Energy, has forecasted an Indefinite Delivery/Indefinite Quantity (IDIQ) contract for insulators with a NAICS code of 327110, indicating the procurement is targeted toward manufacturers of clay and structural clay products. The contract is designated as an 8(a) set-aside, specifically reserved for small businesses, aiming to provide opportunities for economically and socially disadvantaged entrepreneurs to participate in federal procurements. The anticipated contract will support the acquisition of insulators, likely for use in power transmission and distribution infrastructure managed by the Western Area Power Administration. No solicitation number has been issued yet, and the forecast was posted on August 10, 2026, signaling a future procurement window rather than an active solicitation. The place of performance and office address details are unspecified, suggesting potential nationwide deployment or flexible delivery locations depending on project needs. Two Small Business Program Managers, Tetrault and Setzel, are listed as points of contact, indicating the agency’s focus on outreach and support for small business participation. Interested parties should monitor official channels for the upcoming solicitation, as this forecast serves as a notice of upcoming opportunities rather than a request for proposals.
Western Area Power Administration

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-634J
The contract is for the procurement of Clamp, Coupling Nut items under solicitation SPE4A7-26-T-634J, issued by the Defense Logistics Agency through ASC SUPPLIER OPER AE AND AF DIV, with a delivery destination in New Cumberland, Pennsylvania. A total of 55 units are required, with a unit price of $55.000, and a delivery timeline of 249 days after award. The contract also includes a First Article Test requirement, which is not separately priced and is considered included in the base item cost. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with revisions effective as of the solicitation issue or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, while marking and labeling adhere to MIL-STD-129, including mandatory 2D Data Matrix barcodes and compliance with 29 CFR 1910.1200 for hazardous materials. Items containing radioactive material must meet specific thresholds and labeling standards. All deliveries are FOB Origin, and inspection and acceptance occur at the contractor’s facility under RQ009, with the government retaining final approval authority through FAR 52.246-2. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1, with a zero non-conformance acceptance criterion unless otherwise specified, and attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 for critical, major, and minor characteristics respectively. The contractor must maintain an ISO 9001:2015-compliant quality management system. Export-controlled technical data subject to ITAR or EAR is involved, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048, including prior DLA approval for access via the US/Canada Joint Certification Program and mandatory training. Cybersecurity requirements mandate CMMC Level 2 certification, with safeguarding of covered defense information governed by 252.204-7012 and NIST SP 800-171 assessment compliance under 252.240-7997. Prohibitions on hexavalent chromium,
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 327110
New
DIBBS
INTERCONNECTING BOX
Solicitation # SPE4A7-26-T-633F
The contract is for a single interconnecting box, identified by NSN 5975-01-584-4646, with a delivery requirement of five days after receipt of order (ADO) to a designated bulk break point in Los Alamitos, California, and final shipment to Gulfport, Mississippi, under the First Destination Transportation program with FOB Origin terms. The solicitation, issued on August 9, 2026, with a response deadline of August 17, 2026, is processed through the DLA Internet Bid Board System and falls under NAICS code 327110. Technical compliance requires adherence to Drawing NR 78286 70550-02054 Revision J and related reference drawings, along with the Technical Data Package Rev A Gen 1 and all applicable R and I numbers from the DLA Master List of Technical and Quality Requirements. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, while marking must follow MIL-STD-129, with no special marking required. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, with verification levels or AQLs assigned as VII-0.1 for critical, IV-1.0 for major, and II-4.0 for minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under FAR 52.246-2, and zero non-conformances are mandatory unless otherwise stated. The item is subject to strict export controls under ITAR and EAR, requiring compliance with DFARS 252.225-7048 and mandatory JCP certification for access to export-controlled technical data. Offers must be free of additive manufacturing components, as any such items render the offer ineligible for award. A Safety Data Sheet must be submitted prior to award, or the offeror will be deemed nonresponsible. The offeror must be registered in the System for Award Management and comply with all relevant FAR and DFARS clauses, including cybersecurity requirements under 252.204-7012 for safeguarding covered defense information and cyber incident reporting. Additional compliance obligations include the Buy American Act, Berry Amendment (threshold reduced to $150,000), prohibition of hexavalent chromium, restrictions on compensation of former DoD officials
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 327110
New
Federal
Supply of Ceramic Outside Corner Tiles (A585)
DLA Maritime - Portsmouth

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
Federal
Supply of Ceramic Inside Corner Tiles (A585)
DLA Maritime - Portsmouth

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
Federal
Supply of Ceramic Base Tiles (A585)
DLA Maritime - Portsmouth

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
DIBBS
Supplier of Water Closets (NSN: 4510-01-522-8300)
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
Supplier of Water Closet Bowls (NSN: 4510-01-522-8299)
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
Supplier of Water Closet Assemblies (NSN: 4510-01-580-4834)
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
PROTECTOR, ELECTRICA
Solicitation # SPE4A7-26-T-625L
The contract solicits two units of a protector, electrical cable assembly identified by NSN 5975-01-658-1428, under solicitation SPE4A7-26-T-625L, with a delivery requirement of 93 days after receipt of order and a need ship date of November 15, 2026. The item must be manufactured in compliance with multiple technical drawings including NR 19207 12581257, NR 19200 12579607, NR 19207 12577737, and MIL-DTL-53039, and conform to the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, dated May 20, 2026. Quality assurance requires the manufacturer’s inspection system to meet ISO 9001:2015 or an equivalent standard, with sampling performed per MIL-STD-1916, ASQ H1331 Table 1, or an approved zero-based sampling plan; critical, major, and minor attributes must be verified at AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Inspection and acceptance occur at origin with FAR 52.246-2 applicable, and all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129 including the special marking code ZZ, and DLA packaging requirements. The item is subject to export controls under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and offerors must hold an approved US/Canada Joint Certification Program certification, complete required DLA export-controlled data training, and receive approval from the DLA controlling authority to access the technical data. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations, and safeguarding of covered defense information is governed by 252.204-7012. Offerors must have a valid Unique Entity ID and maintain current representations in the System for Award Management. Payment is processed electronically via Wide Area Workflow, requiring both an invoice and receiving report unless an exception applies. FOB origin terms apply, with delivery directed to DLA Distribution DDSP
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 327110
DIBBS
Water Closet Bowl Supply
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
Supply of Split Washers (NSN 5310016688496)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Documentation and Compliance Support
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Services
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation Services
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334419
New
DIBBS
Cable and Conduit Assembly Manufacturing
Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A0-26-T-4128
Solicitation SPE4A0-26-T-4128 is a federal procurement issued by the Department of Defense Aviation Supply Chain ESOC Buys for the acquisition of 20 units of Terminal, Lug (NSN 5940-01-184-9276). The contract requires delivery within 5 days after the date of award to the 0228 AV BN 01 HHC Theater Avn at Soto Cano Air Base in Comayagua, Honduras, under FOB Destination terms. Inspection and acceptance are both conducted by the government at the destination. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Technical and quality compliance is governed by ASTM D3951 and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment must be processed electronically via Wide Area WorkFlow. The award process is likely price-driven and may be a candidate for automated award, with preferences given to various small business socioeconomic categories.
Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A0-26-T-4243
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one threaded pin-rivet under National Stock Number 5320-00-508-8386 and part number HLT316-6-4. The contract requires a delivery timeframe of five days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Virginia Beach, Virginia. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and physical identification marking. Compliance is mandated through the Certificate of Quality Compliance and specific Contract Data Requirements Lists. Suppliers must adhere to the DLA Master List of Technical and Quality Requirements and review the Technical Data Package for comprehensive specifications.
Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4248
This solicitation is for the procurement of 100 machine screws under NSN 5305-00-088-8330 for the Department of Defense Aviation Supply Chain ESOC Buys. The contract is fully competitive and adheres to military and federal specifications, with a required delivery timeframe of five days after receipt of order. The supplier must comply with several technical and quality requirements, including DLA packaging standards, quality conformance inspections, and specific physical identification and bare item marking per MIL-STD-130N. All technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size.
Nonferrous Forging

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333912
New
DIBBS
SUPPORT ASSEMBLY, BE
Solicitation # SPE4A0-26-T-4148
Solicitation SPE4A0-26-T-4148 is a Firm Fixed Price procurement issued by the Department of Defense Aviation Supply Chain ESOC Buys for four units of a Bearing Support Assembly, identified by NSN 4310-01-253-5997. The contract specifies a rapid delivery schedule of five days after the date of order, with the point of inspection and acceptance set at the origin. The items are to be shipped FOB Origin to the Ship Supply Depot JMSDF in Yokosuka, Japan, via Seamodal Transport Corporation. Approved sources include Honeywell International Inc. and Vericor Power Systems LLC. The contractor must adhere to strict quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling, with a requirement for zero non-conformances. Packaging and preservation must comply with MIL-STD-2073-1E and DLA requirement RP001, while marking and labeling must follow MIL-STD-129. Additionally, the contract mandates CMMC Level 2 self-assessment for cybersecurity, compliance with Covered Defense Information requirements, and the use of Wide Area WorkFlow for electronic invoicing. All proposals must be submitted via the DLA Internet Bid Board System by August 14, 2026.
Air and Gas Compressor Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332710
New
DIBBS
REAR HOUSING PANEL
Solicitation # SPE4A0-26-T-4244
This contract is for the procurement of one Rear Housing Panel, identified by NSN 4920-01-612-8671 and part number 93038-119 from Hydraulics International, Inc. The solicitation, numbered SPE4A0-26-T-4244, is issued by the Department of Defense Aviation Supply Chain ESOC Buys. Delivery is required within five days after order, with a final required delivery date of August 6, 2026, shipping FOB Origin to RAF Lakenheath in the United Kingdom. The agreement mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards under ASTM D3951 and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Inspection and acceptance will take place at the destination.
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A0-26-T-4246
Solicitation SPE4A0-26-T-4246 is a Department of Defense procurement issued by DLA Aviation for the supply of four sleeve bushings, identified by NSN 3120005000038. The contract specifies a delivery timeline of five days after the date of order, with an original required delivery date of April 23, 2026. Shipping is established as FOB Origin, with the final destination, inspection, and acceptance point located at Fort Riley, Kansas. All deliverables must adhere to the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards. Technical compliance requires packaging according to ASTM D3951 and RP001, with marking and labeling performed per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan where critical, major, and minor attributes are assigned specific verification levels and AQLs. Administrative requirements include mandatory invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and hazardous material identification. The solicitation was managed by the Aviation Supply Chain ESOC Buys office with a response deadline of August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
PANEL, INDICATOR
Solicitation # SPE4A0-26-T-4242
This contract is for the procurement of one indicator panel, identified by NSN 6695015641504 and part number 6688404 from Doosan Bobcat North America, Inc. The agreement specifies a delivery timeframe of five days and designates the point of inspection and acceptance as the destination. Shipping is required via the fastest traceable means to Fort Drum, New York, with a required delivery date of August 5, 2026. The supplier must adhere to strict quality and technical standards, including DLA master list requirements, MIL-STD-129 for labeling, and ASTM D3951 for packaging. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Additionally, the contract mandates the removal of government identification from non-accepted supplies and requires specific physical identification and bare item marking.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details