Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RACK, STORAGE, SMALL ARM

Active
SPE7LX-26-U-9008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of storage racks designed for small arms, governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging specifications. All items must comply with DLA packaging guidelines including MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging materials, with palletization strictly adhering to RP001 requirements. The items are classified as Category I munitions under DODM 4160.28-Vol.3, requiring demilitarization procedures upon disposition, and any non-accepted supplies must have government identification removed. The contract references numerous technical data packages tied to specific drawing numbers with revision dates as of May 7, 2024, and includes one non-government standard, NAS9301. The unit of issue is each, with a quantity of 15 units priced at $15.00 each, totaling $225.00, though the quantity is estimated and not guaranteed. Delivery is scheduled for 107 days after award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The contract is issued under solicitation SPE7LX-26-U-9008 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and falls under NAICS code 337215 for manufacturing related to metalworking machinery.

General Info

Procurement of 15 storage racks for small arms, DLA-compliant, FOB origin, $225 total, delivery in 107 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-9008.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RACK,STORAGE,SMALL ARMS
RACK,STORAGE,SMALL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19200 13109568 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 12993884 REVISION NR K DTD 04/23/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109568 REVISION NR DTD 07/16/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109569 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109570 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109571 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109572
SPE7LX-26-U-9008
SECTION B
REVISION NR DTD 05/07/2024
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109573 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109574 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109575 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109576 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109577 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109578 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109579 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109580 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109581 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109582 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109583 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109585 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109586 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109586-100
SPE7LX-26-U-9008
SECTION B
REVISION NR DTD 05/07/2024
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109590 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109591 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109592 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109595 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109596 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109597 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109598 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109599 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109600 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109601 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109602 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109603 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 13109604 REVISION NR DTD 05/07/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NAS9301
SPE7LX-26-U-9008
SECTION B
REVISION NR 7 DTD 03/31/2020
PART PIECE NUMBER:
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237114 0001 EA 15.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:1095016121508
DELIVERY (IN DAYS):0107
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9008 NSN/Part Number: 1095-01-612-1508 Quantity: 15 EA Purchase Request: 1000237114QTY: 15 Delivery: 107 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
SLED
FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoardThe District of Columbia’s Behavioral Health agency is forecasting a procurement for new storage racks, hand trucks, and additional kitchen equipment necessary for operational needs. This anticipated contract, listed under the title FY2026/DBH/SEH/NSD/New Racks/Hand Trucks and Etc./N.DeBoard, is scheduled for release in fiscal year 2026 with a posted date of July 23, 2026, and is currently in the forecast phase without a solicitation number or set-aside details. The equipment will support kitchen infrastructure and material handling within agency facilities, though the exact locations of performance and specific requirements are not yet defined. No point of contact information is provided at this stage, and the contract opportunity is accessible via the District’s public procurement portal for future reference.
Behavioral Health (DBH)

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 337215
New
Federal
Archival/Museum Display Cases
Defense Threat Reduction Agency

POSTED

about 24 hours ago

DEADLINE

in 5 days
View Details
NAICS: 337215
New
Federal
10--RACK,STORAGE,SMALL ARM
DLA Land And Maritime

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 337215
New
Federal
LOCKERS
W6QM Micc-Ft Drum

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
Federal
AD / FURNITURE DELIVERY AND INSTALL
FA2823 Aftc Pzio

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
International
EV385-081909 PSIB Furniture Categories 3 and 4All bids for the delivery and installation of office furniture in Prince Albert, Saskatchewan, must be submitted by July 29, 2026, at 2:00 p.m. EDT; any submissions received after this time will be deemed non-responsive, regardless of deadlines listed on external platforms like Ariba Discovery or CanadaBuys. This solicitation, identified as EV385-081909 PSIB Furniture Categories 3 and 4 with solicitation number WS5715686633, is issued by Public Services and Procurement Canada on behalf of Indigenous Services Canada, with a required delivery date of January 8, 2027. The opportunity is hosted exclusively on SAP Ariba without any fees for access or participation, and responses must follow the official tender notice on the SAP Business Network. The NAICS code for this contract is 337215, and the primary point of contact is Eddie Beddall, Contracting Authority, reachable at eddie.beddall@tpsgc-pwgsc.gc.ca.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 337215
New
International
E60HN-26CFWL - RFSO - Weapon LockersThe solicitation E60HN-26CFWL for Weapon Lockers is issued under the reference number WS5760989938 by the Government of Canada through the Department of Public Works and Government Services. The opportunity was posted on July 17, 2026, with a response deadline set for August 12, 2026, at 7:00 PM Eastern Time. The NAICS code 337215 identifies this as a procurement related to metal fabrication for furniture and fixtures, specifically targeting secure weapon storage solutions. Performance of the contract is expected to take place within Canada, with no specific city or postal code identified beyond the country level. The primary point of contact for inquiries is Alexandra Nadeau, Contracting Authority, reachable via email at alexandra.nadeau@tpsgc-pwgsc.gc.ca. This solicitation is open to federal procurement and does not designate a specific set-aside category for small businesses or other demographic groups. The full details and documentation can be accessed through the CanadaBuys platform using the provided link.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 337215
New
Federal
Heavy-Duty Tool Cabinet Supply and AssemblyThe contract calls for the supply and assembly of two heavy-duty industrial tool cabinets designed to meet Lista Cabinet performance standards, featuring pegboard backing, locking doors, casters, and robust construction to ensure durability and reliability in demanding environments. These cabinets must be fully assembled and ready for immediate use upon delivery, with all components meeting stringent quality and functional benchmarks associated with high-end industrial storage solutions. The requirement is part of a Total Small Business Set-Aside under the NAICS code 337215, exclusively open to small businesses to promote economic opportunity within the sector. This subcontract is issued by the Department of Defense through DLA Distribution, with performance required at the New Cumberland, Pennsylvania location, zip code 17070. The solicitation was posted on July 22, 2026, and responses are due by 5:00 PM on July 27, 2026, providing a five-day window for submission. Interested vendors must be prepared to demonstrate compliance with all technical specifications, delivery timelines, and small business certification requirements to be considered eligible under the set-aside provisions. The award will be made to a qualified small business capable of delivering a fully functional, secure, and long-lasting tool cabinet system to support federal operations.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
Federal
Custom Industrial Storage Cabinet FabricationA heavy-duty industrial storage cabinet is to be fabricated and delivered with a butcher block top, locking drawers, casters, and overhead cabinets, meeting Lista Cabinet quality and design standards. The work is solicited as a subcontract under a Total Small Business Set-Aside, exclusively for small business concerns, and is classified under NAICS code 337215 for wood kitchen and bath cabinet manufacturing. The contract requires precise adherence to specified materials and construction methods to ensure durability, functionality, and aesthetic alignment with recognized industrial-grade benchmarks. Performance must be completed and delivered to New Cumberland, Pennsylvania, with a response deadline of July 27, 2026, and the solicitation is managed by the Department of Defense through DLA Distribution.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
Federal
DDSP Tool CabinetsThis solicitation, identified as SP330026Q0185, seeks firm-fixed-price purchase orders for specialized storage cabinets to be delivered and installed at DLA Distribution Susquehanna Pennsylvania in New Cumberland, PA. The procurement is exclusively reserved for small businesses under a Total Small Business Set-Aside, categorized under NAICS code 337215 for Metal Cabinet and Lockers Manufacturing. The contract will be awarded via Standard Form 1449 and is not subject to Defense Priorities and Allocations System rating. The requested equipment includes three distinct cabinet configurations: a 144-inch wide unit with a butcher block top, locking drawers rated for 440 pounds, and overhead storage with peg board backing; a 72-inch wide cabinet with overhead storage and casters; and a 47-inch wide vertical cabinet with six shelves, required to perform equivalently to Lista-brand cabinets. All units must include locking mechanisms and be mounted on casters for mobility. The Government intends to evaluate offers based on technical acceptability and price, consistent with a Lowest Price Technically Acceptable approach, though the formal evaluation factors are not explicitly stated in the documentation. The solicitation was issued on July 22, 2026, with a response deadline of July 27, 2026, following multiple amendments that refined cabinet specifications, corrected schedule details, and extended submission timelines. Place of performance is clearly defined as the DDSP facility in New Cumberland, Pennsylvania, and while delivery terms include FOB and invoicing procedures, no specific FOB point, payment office, or invoice submission method is identified. Technical requirements rely on brand equivalence rather than formal military or industry standards, and no packaging, marking, barcoding, or preservation specifications are included. The contracting officer point of contact is Samuel Tustin of DLA Distribution’s Acquisition Operations, J-7. Offerors must acknowledge amendments and submit responses in compliance with administrative guidance, but no representations, certifications, UEI/CAGE codes, or socioeconomic certifications are required to be completed at the proposal stage. Neither the estimated contract value nor detailed pricing is provided, rendering any cost estimate speculative. The acquisition is administrative in nature, governed primarily by FAR 43.103(b) for modifications, with no special requirements for security, key personnel, options, or conflicts of interest.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
Federal
9 OSS Pilot LockersThe 9th Contracting Squadron at Beale AFB is soliciting bids for the purchase and delivery of 82 industrial-grade lockers under solicitation FA468626QC006, with a total small business set-aside under FAR 19.5. The lockers must be constructed with high-pressure laminate over wood, featuring a stain- and scratch-resistant finish with a minimum 16"x16" interior clearance and a Wilsonart 4880-38 Carbon Mesh or equivalent surface. The order includes four configurations: 60 single-tier 3-wide lockers, 4 single-tier 1-wide lockers, 12 double-tier 3-wide lockers, and 6 double-tier 1-wide lockers, all to be delivered in a single shipment within 75 calendar days of contract award to the designated location at Beale AFB, CA. Installation is not required, but the contractor must handle unloading, unpacking, and site cleanup. The contract is structured as a firm-fixed-price award under a Lowest Price Technically Acceptable (LPTA) evaluation, where technical acceptability is assessed first against the Statement of Need and Specifications, with price serving as the deciding factor among technically compliant offers. All offers must be submitted electronically to Stephen Tyler and Wyatt Lundgreen by the deadline of July 29, 2026, and must include a completed and matching specification sheet. Delivery must comply with FOB Contractor Destination terms, with inspection and acceptance occurring at the destination site using DoDAAC F1H1GC. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system, and payment will be made via electronic funds transfer. Offerors must be registered in SAM and meet small business criteria, with specific clauses incorporated to ensure compliance with Buy American requirements, prohibitions on procurement from Xinjiang and the Maduro regime, whistleblower protections, and prohibitions on certain internal confidentiality agreements. Contractors must also ensure that personnel accessing Beale AFB possess a valid REAL ID or passport; no formal security clearance is required. While packaging, preservation, and labeling specifications are not detailed, all lockers must be fully assembled prior to delivery, and option pricing, if any, must be submitted and may impact technical acceptability if unbalanced. The government will not award a contract absent a technically acceptable proposal, regardless of price.
FA4686 9 Cons Pk

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 337215
New
Federal
Supply of Compact Mobile Shelving Units
255-NETWORK Contract Office 15 (36C255)

POSTED

3 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 Assessment SupportThe contract requires support for achieving and maintaining NIST SP 800-171 compliance in alignment with DFARS requirements, encompassing comprehensive system assessments, detailed documentation of security controls, and robust cyber incident reporting procedures. The effort is geared toward ensuring that covered systems meet federal standards for protecting controlled unclassified information, with a focus on thorough evaluations of security posture, control implementation, and continuous compliance monitoring. All activities must adhere strictly to the framework established by NIST and the Department of Defense, with deliverables including validated assessment reports and timely incident notifications as mandated by regulation. This subcontract is issued under the NAICS code 541512 for computer systems design services by the Strategic Acquisition Program Directorate within the Department of Defense, and responses are due by July 28, 2026. The work will be performed in support of defense-related operations, though the specific location of performance is not outlined. The solicitation is part of a broader initiative to strengthen cybersecurity readiness across the defense industrial base, emphasizing accountability, documentation integrity, and rapid response to cyber threats. Contractors must demonstrate proven experience in NIST SP 800-171 assessments and DFARS compliance, and the selection process will prioritize technical capability and demonstrated success in similar government cybersecurity engagements.
Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and SDS ComplianceThe contract pertains to the classification, handling, and regulatory compliance of hazardous materials contained within propeller shaft components, requiring strict adherence to federal and industry safety standards. A primary responsibility includes the preparation and timely submission of accurate Safety Data Sheets that detail the chemical composition, hazards, handling procedures, emergency measures, and disposal methods for all regulated substances involved. Compliance with applicable environmental, transportation, and occupational safety regulations is mandatory throughout the lifecycle of these components, from procurement through manufacturing and delivery. Work under this subcontract must be executed in alignment with NAICS code 541620, indicating it is a scientific and technical services contract, likely supporting defense system supply chains. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with a submission deadline of July 28, 2026, and a posting date of July 23, 2026. The place of performance and specific office details are not provided, but the nature of the work implies coordination across multiple facility locations involved in the production or integration of naval propulsion components. Full regulatory documentation and traceability of hazardous material handling are expected to ensure seamless integration within military systems and compliance with DoD supply chain security protocols.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Marking of Propeller ShaftsThe contract requires the military-compliant packaging, preservation, palletization, and labeling of propeller shafts to ensure safe and standardized handling during shipment. All work must adhere to rigorous defense specifications, including the precise application of barcodes for traceability and compliance with hazardous material protocols if any components are classified as hazardous. The packaging and marking process must guarantee product integrity throughout transit and meet all applicable military logistics standards. This subcontract, posted under NAICS code 493190 by the Strategic Acquisition Program Directorate within the Department of Defense, is open for responses until July 28, 2026. The performance location and point of contact details are not specified, but the work is intended to support defense logistics operations under the DLA’s procurement framework. Interested parties must submit proposals through the designated DIBBS portal by the stated deadline to be considered for award.
Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336350
New
DIBBS
Manufacture of Propeller Shafts with Universal JointsThe contract specifies the precision fabrication, assembly, and delivery of 18 military vehicle propeller shafts equipped with universal joints, requiring strict adherence to defense specifications for performance and reliability. Each component must undergo comprehensive balancing and rigorous quality assurance procedures to ensure operational readiness under demanding military conditions. The work is classified as a subcontract under NAICS code 336350, aligned with the Department of Defense’s Strategic Acquisition Program Directorate, and must be completed and delivered by the response deadline of July 28, 2026, following the solicitation posted on July 23, 2026. All manufacturing, testing, and delivery activities are expected to comply with defense-grade standards without deviation, and the place of performance is not geographically restricted as no specific location is provided.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Compliance DocumentationThe contract seeks a small business to provide technical documentation, quality assurance testing, and compliance verification services to ensure splash guards meet all technical specifications set by the Defense Logistics Agency. This includes preparing Safety Data Sheets and validating labeling to confirm adherence to regulatory and operational standards. The work is critical to ensuring product conformity and safety for military use, requiring precise execution throughout the documentation and testing phases. The solicitation is a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to respond, and it falls under NAICS code 541380 for other professional, scientific, and technical services. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While no specific location is listed for performance or the point of contact, the work is expected to be performed in support of defense logistics operations under the authority of the DLA.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 484121
New
DIBBS
Logistics and Transportation Services (CONUS)This contract seeks qualified small businesses to provide comprehensive logistics and transportation services for the movement of packaged splash guards across the Continental United States. The scope includes full shipment coordination, real-time delivery tracking, and the generation of WAWF-compliant documentation to ensure seamless integration with Department of Defense supply chain systems. All transport activities must adhere to strict federal contracting standards and operational protocols to guarantee timely, secure, and accurate delivery of materials. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designating this opportunity exclusively for small businesses certified under the SBA’s guidelines. The NAICS code 484121 applies, specifically categorizing the work under truck transportation of specialized freight. Proposals must be submitted by the stated deadline to be considered, and performance will be conducted entirely within the CONUS region, with no international components involved.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 423840
New
DIBBS
Packaging and Palletization ServicesThe contract requires the provision of compliant packaging, labeling, and palletization services for splash guards in accordance with DLA standards RP001 and applicable hazardous material regulations such as FED-STD-313 or commercial standards like ASTM D3951. All work must ensure full regulatory compliance throughout the packaging process, from material handling to final unit preparation for shipment, with strict adherence to military and industry specifications for safety, durability, and identification. The services are tailored to support defense logistics requirements and must be delivered with precision to meet quality and traceability expectations. This is a total small business set-aside subcontract under NAICS code 423840, issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is accessible via the DIBBS platform. Performance location details are not specified, but the work is expected to align with federal defense supply chain protocols. The contract emphasizes small business participation and demands full compliance with all applicable standards without exception.
Industrial Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336340
New
DIBBS
Manufacture and Supply of Vehicular Splash GuardsThe contract entails the full lifecycle production and delivery of vehicular splash guards identified by NSN 2540015030413, covering all stages from material acquisition and fabrication to final quality assurance, packaging, labeling, and shipment to destinations within the continental United States. Execution must adhere strictly to delivery orders issued under the terms of this agreement, ensuring timely and compliant fulfillment of military requirements. The work is classified under NAICS code 336340, which pertains to motor vehicle parts manufacturing, and is subject to a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. This subcontract opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. While no specific point of contact or performance location details are provided, the contractual obligations center on manufacturing excellence and supply chain reliability to support defense operations. All proposers must demonstrate capacity to meet stringent defense quality standards and operational timelines through a fully integrated production and logistics process. The solicitation is accessible via the DIBBS platform under reference number SPE7LX26U8634.
Motor Vehicle Brake System Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 483111
New
DIBBS
Ocean Transportation of SuppliesAll finished mounts must be transported via U.S.-flagged vessels for overseas delivery unless a formal waiver is granted, ensuring adherence to federal maritime regulations. Compliance with DFARS 252.247-7023 is mandatory, underscoring the requirement to use American-flagged shipping services to support national security and domestic maritime interests. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the SBA, and falls under NAICS code 483111 for ocean freight transportation. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, which retains authority over the procurement process and performance obligations.
Deep Sea Freight Transportation

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires full compliance with OSHA and DFARS regulations concerning the handling and labeling of hazardous materials, particularly focusing on the proper identification and documentation of cleaning agents or substances that present potential risks. All materials must be accurately labeled according to OSHA standards, and Material Safety Data Sheets (MSDS) must be prepared and maintained for any substance deemed hazardous to ensure workplace safety and regulatory adherence. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the Small Business Administration. It falls under the NAICS code 541690, which pertains to other scientific and technical consulting services, suggesting the work involves advisory or operational support related to hazardous material management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is administered by the Strategic Acquisition Program Directorate under the Department of Defense. Performance location details are unspecified, and the contract is accessible via the DIBBS platform for registered bidders.
Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 323111
New
DIBBS
Marking, Labeling, and BarcodingThe contract requires the application of permanent and shipping labels in full compliance with MIL-STD-129 and MIL-STD-130N standards, encompassing Data Matrix barcodes, Unique Item Identification (UID) marking, and clear human-readable text to ensure traceability and regulatory adherence across military supply chains. All labeling must meet exacting military specifications for durability, legibility, and data accuracy, with particular attention to the proper implementation of UID requirements for asset tracking and inventory management. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 323111, open for bids with a response deadline of July 28, 2026. The solicitation is issued by the Strategic Acquisition Program Directorate within the Department of Defense, emphasizing the need for qualified contractors to support defense logistics systems. The place of performance and point of contact details are not specified, but the work is expected to align with DLA and DoD supply chain protocols, and interested parties must access the full solicitation via the provided DIBBS link for complete requirements and submission instructions.
Commercial Printing (except Screen and Books)

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and PalletizationThe contract requires full compliance with military standards for packaging, preservation, and palletization to ensure goods are shipped in a moisture-free, durable condition suitable for defense logistics. Preservation must follow Method 10 CLNG/DRY, and all packaging, labeling, and palletization must meet DLA and MIL-STD specifications to guarantee operational readiness during transit and storage. The work is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The NAICS code 493190 identifies the work as other transportation support activities, specifically tied to military logistics and supply chain handling. The solicitation opens on July 23, 2026, with a hard deadline for submissions on July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will align with federal requirements for secure, standardized military shipping protocols.
Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details