Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Radar Transmitter Maintenance and Restoration Services

Active

Federal

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Radar Transmitter Maintenance and Restoration Services subcontract involves the teardown, evaluation, and repair of radar transmitter end items supporting the USAF 448th Supply Chain Management Wing. The scope of work includes conducting test, teardown, and evaluation, replacing failed components, and performing cleaning and reassembly in accordance with MIL-HDBK-454C and T.O. 1-1-691. Additionally, the contractor must apply corrosion treatment following MIL-STD-1568E and provide final serviceable end items along with detailed reports. This project is managed under the Department of Defense and requires strict adherence to technical standards, including the use of ESD-protected environments and CMMC Level 2 compliance. Interested parties must respond by November 5, 2026, for this effort categorized under NAICS code 811212.

General Info

Subcontract for USAF radar transmitter repair, evaluation, and restoration by November 5, 2026.

Agency

Department Of Defense → FA8250 Afsc Pzaaa

NAICS

811212 - Computer and Office Machine Repair and Maintenance

Place of Performance

UT, USA

Set-Aside

NONE

Documents

This scope was carved out of FA825027PSTIDIQ.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRE-SOLICITATION NOTICE: 415 SCMS Transmitter IDIQ

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8250 Afsc Pzaaa

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8250 Afsc Pzaaa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, and repair of radar transmitter end items for prime contractors on USAF 448th Supply Chain Management Wing projects. Conducts TT&E, replaces failed parts, and performs cleaning and reassembly IAW MIL-HDBK-454C and T.O. 1-1-691. Applies corrosion treatment IAW MIL-STD-1568E. Requires ESD-protected environments and CMMC Level 2. Delivers serviceable end items and TT&E reports.

Similar Contracts

Same NAICS industry code

Control-Display Unit (CDU) Repair and Overhaul ServicesThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical tear-down, evaluation, and repair of the Control-Display Unit (NSN 6110-016477412). The scope of work focuses on internal circuitry repair, modification, and testing for part number 822-2463-001 using specialized diagnostic equipment to ensure the delivery of a certified Ready for Issue unit. The project requires strict adherence to Buy American and Balance of Payments Program standards. Interested parties must note that the response deadline is November 19, 2026, and the services fall under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Digital Computer Repair & Component-Level ModificationThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical repair and component-level modification of a specific digital computer, NSN 1680-01-541-3692 RV. The scope of work requires the contractor to perform a complete unit teardown, evaluate the hardware against technical requirements, and execute necessary modifications to restore full functionality. These tasks must be completed using specialized jigs, fixtures, and test equipment to ensure the unit is fully repaired, tested, and inspected. The project mandates strict adherence to MIL-STD-2073 packaging standards and compliance with Buy American requirements. The final deliverable is one fully restored digital computer. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

Receiver-Transmitter Repair and OverhaulThis subcontract involves the teardown, evaluation, repair, and modification of naval receiver-transmitters for prime contractors supporting U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting units, followed by component-level repair and replacement. All work must be tested according to approved manuals and IPC/EIAJ-STD-001C standards, requiring the use of specialized electronic test and measurement equipment and NAVSUP WSS Source Approval. The primary objective of the contract is the delivery of six serviceable, ready-for-issue receiver-transmitters under NSN 5821-01-585-5355 P8. This effort falls under NAICS code 811212 and is managed by the Department of Defense. The response deadline for this opportunity is November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Power Supply Amplifier Overhaul and RepairThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and repair of Power Supply Amplifiers. The scope of work includes the teardown, evaluation, and modification of units to identify failed components and replace internal parts that exceed repair manual limits. All work must be performed in accordance with IPC/EIAJ-STD-001C and MIL-STD-454 standards to ensure the units are returned to a Ready for Issue condition. The project requires the delivery of six Power Supply Amplifier units and necessitates NAVSUP WSS Source Approval for the performing contractor. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Control-Display Unit Repair and OverhaulThis subcontract involves the technical repair, overhaul, and upgrade of Control-Display Units under NSN 6610-01-670-1033 for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will be responsible for executing detailed overhaul procedures, inspections, and testing to ensure all units are returned to Ready for Issue condition. Additionally, the scope includes the development of performance specifications and repair procedures to maintain operational standards. To qualify for this effort, the contractor must possess the necessary testing equipment for the specific NSN and hold NAVSUP WSS Source Approval. The primary objective is the delivery of certified RFI units. This opportunity is categorized under NAICS code 811212 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Aviation Processor Repair and Overhaul ServicesThe Aviation Processor Repair and Overhaul Services subcontract involves the teardown, evaluation, repair, and modification of Processor, Display A units for prime contractors supporting U.S. Navy NAVAIR projects. Managed under the Department of Defense and Navsup Weapon Systems Support, the scope of work includes disassembling processors to identify failed components, replacing faulty circuitry, updating firmware, and performing precision soldering. All work must be conducted in ESD-safe facilities using aviation-grade diagnostic tools to ensure rigorous environmental and performance testing. The primary objective of the contract is to deliver serviceable hardware returned to Ready For Issue condition. This opportunity falls under NAICS code 811212, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Antenna Coupler Repair and Testing ServicesThis subcontract for Antenna Coupler Repair and Testing Services supports NAVSUP WSS and NAVAIR projects through the Department of the Navy. The scope of work involves the complete teardown, evaluation, and repair of antenna couplers, including the identification of failures and the replacement of internal components according to Rockwell Collins Drawing 822-1706-002. All units must undergo functional testing, be marked in accordance with MIL-STD-130, and be packaged per MIL-STD-2073 before final delivery. Performance will take place in Philadelphia, and the contractor must maintain ISO 9001 or AS9100 certification along with ANSI/NCSL 2540 calibration. Interested parties should note the response deadline of November 19, 2026. The project falls under NAICS code 811212 and requires the delivery of fully repaired and certified equipment.

Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Industrial and Commercial Weigh Scale Maintenance ServicesAlliance Facility Solutions Inc. is seeking a subcontractor to provide industrial and commercial weigh scale maintenance services for CBRE facility projects throughout British Columbia. The scope of work involves performing essential maintenance, calibration, and safety inspections, including preventative and seasonal tasks conducted in accordance with manufacturer procedures and the Weights and Measures Act of Canada. The primary objective is to ensure all scales are certified and operational while ensuring all CMMS work orders are properly closed. To qualify for this subcontract, providers must hold Measurement Canada certification, maintain Tier 3 Achilles status, and demonstrate full compliance with WorkSafeBC regulations. Interested parties must submit their responses by November 3, 2026, to support these critical facility operations within the province.

Alliance Facility Solutions Inc.

POSTED

about 22 hours ago

DEADLINE

Nutanix Enterprise Support and MaintenanceThe Nutanix Enterprise Support and Maintenance subcontract involves providing technical support and maintenance for prime contractors working on public safety projects for the Town of Stratford. The scope of work includes delivering software support and hardware maintenance contracts managed through the Nutanix Support Portal, with a strict requirement for the provider to maintain authorized Nutanix partner status and operate a local or accessible service center. Managed by DAS Procurement for the state of Connecticut, the contract emphasizes adherence to specific service level agreements and life cycle costing. Interested parties must submit responses by October 30, 2026, to provide the necessary active support contracts and maintenance agreements under NAICS code 811212.

DAS Procurement

POSTED

DEADLINE

IBM TS3500 Tape Library Accessor Repair and InspectionThis subcontract involves the inspection and repair of IBM TS3500 (3584) tape library accessors to support projects for the City of Philadelphia Office of Innovation & Technology. The scope of work requires specialized expertise in IBM TS3500 architecture to perform comprehensive inspections of grippers, X/Y axis motors, belts, pinions, PDC cards, and bumpers. These technical services are specifically aimed at resolving error codes 48A0 and 4891 to ensure the tape library is fully operational for data migration. The project is located in Philadelphia and falls under NAICS code 811212. Interested parties should note the response deadline of October 23, 2026. The primary objective of the engagement is to restore critical hardware functionality to facilitate seamless data movement for the agency.

Office of Innovation & Technology (oit)

POSTED

DEADLINE

DiagnostX System Maintenance and Technical SupportThe DiagnostX System Maintenance and Technical Support subcontract involves providing ongoing technical assistance and maintenance for prime contractors managing Broward County health projects. The scope of work focuses on the DiagnostX Waveform Analyzer and Remote Receiver systems, requiring the contractor to perform technical troubleshooting, preventative maintenance, and necessary software updates. To ensure quality and compliance, the service provider must hold an OEM certification from Locus Diagnostics, LLC. Key deliverables for this engagement include the submission of detailed maintenance logs and the verification of system uptime. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline of October 23, 2026. The contract falls under NAICS code 811212 and is managed through the Broward County procurement system.

POSTED

DEADLINE

Emergency Restoration & Break-Fix ServicesThis subcontract opportunity with the Navsup Flt Logistics Ctr Norfolk involves providing rapid-response restoration and emergency break-fix services for communications failures supporting NCTAMS LANT DET GTMO projects. The selected provider will be responsible for restoring critical transport and network links utilizing mobile testing units and delivering regular situation reports to ensure the continuity of communications services. Qualified candidates must possess a Secret security clearance and maintain the ability to deploy rapidly to Guantanamo Bay. This requirement is categorized under NAICS code 811212, with a response deadline set for October 27, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8250 Afsc Pzaaa

Same awarding agency

Precision Refinishing and Corrosion ControlThe Precision Refinishing and Corrosion Control subcontract involves providing specialized cleaning, corrosion treatment, and refinishing services for transmitter housings. Supporting prime contractors on projects for the USAF 448th Supply Chain Management Wing, the work is governed by strict military standards, including MIL-HDBK-454C for cleaning and MIL-STD-1568E section 4 and T.O. 1-1-691 for corrosion control. The process requires the use of industrial cleaning agents and corrosion-resistant coatings to ensure long-term surface protection of the delivered components. Managed by the Department of Defense under agency FA8250 Afsc Pzaaa, this opportunity falls under NAICS code 332813. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026. The primary objective is the delivery of fully cleaned and refinished transmitter components that meet all specified military technical requirements.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 8 hours ago

DEADLINE

Radar Transmitter Component and Parts SupplyThe Radar Transmitter Component and Parts Supply subcontract involves providing high-precision electronic components, sub-assemblies, and replacement parts to prime contractors supporting the USAF 448th Supply Chain Management Wing. Operating under NAICS code 334418 for the Department of Defense, the provider must source parts by National Stock Number and Part Number while strictly adhering to AS5553 standards to ensure authenticity and prevent the introduction of counterfeit components. All deliverables must be marked in accordance with MIL-STD-130 and MIL-STD-129 and must follow all applicable Special Packaging Instructions. The primary objective of the contract is the delivery of certified authentic replacement components to maintain the operational integrity of radar transmitter systems.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

PRE-SOLICITATION NOTICE: 415 SCMS Transmitter IDIQ

Solicitation # FA825027PSTIDIQ

The Department of the Air Force intends to award a five-year, sole-source, Indefinite Delivery, Indefinite Quantity (IDIQ) Firm-Fixed-Price contract to Applied System Engineering, Inc. (ASE) for the repair of various radar transmitters, including the AN/MST-T1(V) Mini-Mutes, AN/TSQ-T10 Joint Threat Emitter, and AN/TPT-T1 Unmanned Threat Emitter. This acquisition is conducted under FAR 6.103-1, as ASE is the original equipment manufacturer and the only source with the proprietary technical data, specialized tooling, and engineering expertise required to perform the work. The scope of work includes comprehensive test, teardown, and evaluation (TT&E) to identify failed components, followed by the repair or replacement of parts to restore end items to a serviceable, like-new condition. The contractor is required to adhere to strict quality and technical standards, including MIL-STD-130 and MIL-STD-129 for unique item identification and CMMC Level 2 cybersecurity requirements. Key deliverables include TT&E reports, a Counterfeit Prevention Plan due within 30 days of award, and the submission of data to the IUID Registry. The contract includes a one-year warranty period for workmanship and parts. While intended as a sole-source action, the agency is accepting capability statements for 15 days to determine if a competitive acquisition is warranted. The overall program falls under a Class Justification and Approval with a maximum ceiling of 4.29 billion dollars.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Modernization Trade StudyThe Modernization Trade Study is a subcontract opportunity issued by the Department of Defense under agency FA8250 Afsc Pzaaa. The project focuses on performing conceptual engineering trade studies for prime contractors working on MUTES Data Package projects. The primary technical objective is to evaluate the transition from legacy synchros to modern resolvers and analyze how this modernization impacts the overall Data Package, culminating in the delivery of a conceptual Trade Study report. To be eligible, contractors must possess electromechanical system simulation software and demonstrate CMMC Level 2 readiness. This opportunity falls under NAICS code 541330. The solicitation was posted on October 5, 2026, with a response deadline of November 5, 2026.

Engineering Services

POSTED

DEADLINE

Obsolescence Analysis & Component ManagementThe Obsolescence Analysis and Component Management subcontract, issued by the Department of Defense under agency FA8250 Afsc Pzaaa, focuses on evaluating component availability and establishing obsolescence management baselines for prime contractors on MUTES Data Package projects. The scope of work involves analyzing the viability of current synchro components and identifying at-risk parts within existing configurations by leveraging component databases and supply chain intelligence tools. Key deliverables for this effort include a comprehensive component obsolescence report and a baseline configuration Technical Data Package. To be eligible for this engagement, contractors must demonstrate CMMC Level 2 readiness. The solicitation was posted on October 5, 2026, with a response deadline of November 5, 2026, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Technical Data Package (TDP) GenerationThis subcontract opportunity with the Department of Defense, specifically under agency FA8250 Afsc Pzaaa, focuses on the generation of formal technical documentation for MUTES Data Package projects. The selected contractor will be responsible for creating complete, MIL-STD-31000 compliant Technical Data Packages, which include electrical schematics, Bills of Materials, and detailed manufacturing processes derived from 3D CAD models and 2D PDF drawings. To successfully execute this contract, the provider must possess specialized expertise in MIL-STD-31000 and maintain CMMC Level 2 readiness. Required resources include high-end CAD/CAM software and advanced 3D scanning and metrology equipment. Interested parties must submit their responses by November 5, 2026, under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Reverse Engineering & TT&E ServicesThis subcontract for Reverse Engineering and TT&E Services, issued by the Department of Defense under agency FA8250 Afsc Pzaaa, involves providing Test, Training, and Evaluation and reverse engineering support for MUTES Data Package projects. The scope of work includes the non-destructive disassembly of 20 units, dimensional inspection of gearing, and materials analysis of multi-speed TRX-type synchro systems based on established Technical Orders. The selected provider must utilize precision measurement tools and a materials analysis laboratory to deliver comprehensive technical reports. To be eligible, contractors must demonstrate CMMC Level 2 readiness and possess either a DD Form 2345 or JCP registration. The opportunity falls under NAICS code 541330, with a posting date of October 5, 2026, and a response deadline of November 5, 2026.

Engineering Services

POSTED

DEADLINE

Specialized Testing & Verification Services

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Component & Material Supply

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Engineering & Redesign Services

Engineering Services

POSTED

DEADLINE

in about 1 month

Component Repair & Rebuild Services

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Request for Information (RFI): Azimuth (AZ) and Elevation (EL) AN/MST-T1A MUTES & Mini-MUTES

Solicitation # FA8250-27-RFI-AZ-EL

The Department of the Air Force is issuing a Request for Information (RFI) under solicitation FA8250-27-RFI-AZ-EL to identify industry partners capable of performing Teardown, Test, and Evaluation (TT&E) and Technical Data Package (TDP) development for the AN/MST-T1A MUTES and Mini-MUTES ground-based radar systems. The primary objective is to establish a definitive engineering baseline for twenty unserviceable Azimuth and Elevation Data Package assemblies, as a complete product-level TDP does not currently exist in the government repository. Key deliverables for the future effort will include unit-specific teardown and repair reports and a consolidated MIL-STD-31000 compliant TDP featuring electrical schematics, bills of materials, manufacturing processes, and 3D CAD or 2D PDF drawings. Interested respondents must submit a technical whitepaper not exceeding 10 pages by November 5, 2026. The submission must cover corporate overview, reverse-engineering methodology, TDP generation experience, and component obsolescence management, with an optional trade study on modernizing synchros to resolvers. While this RFI is for planning purposes and does not commit the government to a contract, any future award eligibility will require Cybersecurity Maturity Model Certification (CMMC) Level 2 self-certification. Access to technical data requires a validated Joint Certification Program registration or DD Form 2345.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS