Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Radiation Protection Shielding Installation

Active

State & Local

Response Deadline03/26/2030, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the installation of lead-lined walls, doors, and barriers in designated radiation areas, including X-ray and medical imaging rooms, to ensure compliance with regulatory standards and design specifications for radiation safety. The work requires precise execution to contain ionizing radiation and protect personnel and the public, with materials and construction methods aligned with industry best practices and applicable health and safety codes. All installations must meet or exceed the structural and shielding requirements established for medical imaging facilities. The contract is classified as a subcontract under NAICS code 238290, administered by Sourcewell, and is open for responses through March 26, 2030. The scope is focused exclusively on shielding installation within specified healthcare or research facilities, and performance is expected to adhere strictly to technical and regulatory guidelines without deviation. While no specific location or point of contact is provided, the work will occur wherever radiation shielding is required under the terms of the project, and participation is intended for qualified contractors experienced in medical radiation protection systems.

General Info

Install lead-lined shielding in medical radiation areas to meet safety codes through March 26, 2030.

Agency

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

MN, USA

Set-Aside

NONE

Documents

This scope was carved out of MD-030425.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Janus Contractors, Inc. — MD - Region 6 - General Contractor

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 4

subcontract

Response DeadlineMar 26

Submission deadline

Response Deadline

03/26/2030, 12:00:00 AM UTCin over 3 years

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencySourcewell

ContactsNo contacts available

OfficeN/A

Organization / AgencySourcewell

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of lead-lined walls, doors, and barriers in designated radiation areas such as X-ray or medical imaging rooms to meet regulatory and design criteria.

Similar Contracts

Same NAICS industry code

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the WJ Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work extends beyond installation to include necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. Managed by PTSI Managed Services Inc., the project has an estimated construction magnitude between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. The solicitation was posted on October 28, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for a fee-for-service contract to provide panic hardware installation services for electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations, including the B-Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational areas. The scope of work requires the contractor to conduct site surveys, procure Grade I commercial-grade panic bars and associated hardware, and perform installations that ensure doors unlatch immediately under simple pushing pressure from the inside. All work must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards, with final acceptance contingent upon the successful completion of at least 10 consecutive cycle tests. This is a small business set-aside opportunity open to SB, VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a completed bid sheet, a supplier packet including a W-9 and self-certification form, and three references for similar projects by December 1, 2026, at 3:00pm MST. The contract is subject to various federal regulations, including FAR clauses regarding the utilization of small businesses, combating trafficking in persons, and the Davis-Bacon Act, which mandates prevailing wage rates and paid sick leave for workers. Awardees will be required to provide proof of insurance and maintain a Unique Entity Identification number for reporting purposes.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month

BAS Controller & Field Device MaintenanceThis subcontract for BAS Controller and Field Device Maintenance involves performing preventive maintenance and repairs on BAS field controllers for prime contractors working on California Department of General Services facility projects in Sacramento. The scope of work specifically requires the maintenance and troubleshooting of Network Automation Engines as well as Johnson Controls Unitary, VMA, and VAV controllers, with the final deliverables being maintenance reports and fully functional field controllers. To be eligible, contractors must maintain 1,000,000 dollars in Workers Compensation and General Liability insurance and ensure full compliance with DIR General Prevailing Wage requirements. The solicitation was posted on October 28, 2026, with a response deadline of December 1, 2026.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Pauma Security Gate

Solicitation # 2026-27-06

Solicitation 2026-27-06 for the Valley Center Pauma Unified School District involves the fabrication and installation of automated, keypad-entry hinging steel security swing gates at entry and egress driveways in Valley Center, California. The project requires two powder-coated steel double swing gates, each 18 feet wide by 5 feet tall, and explicitly prohibits the use of chain link options. Key technical components include a mounted Knox switch with Fire Department filing, two entry remotes, gate hold timers, a mounted strobe detector for emergency vehicles, and a keypad similar to the Door King 1506-086. The contract value is capped at 1,000,000 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible bidders must hold a California contractor's license C13 or C-61/D28 and comply with prevailing wage requirements and Department of Industrial Relations registration. The project mandates a payment bond for 100 percent of the total bid price and a DVBE participation goal of at least 3 percent. Required submissions include a comprehensive bid packet featuring non-collusion affidavits, Iran Contracting Act certification, and fingerprinting certifications. Performance must be coordinated with the Director of Maintenance and Operations, with work hours restricted to 7:00 am to 5:00 pm, Monday through Friday. Additionally, contractors must adhere to strict hazardous material standards and California Air Resources Board compliance, with the district maintaining the right to terminate the agreement upon 30 calendar days written notice.

Valley Center Pauma USD

POSTED

about 6 hours ago

DEADLINE

Elevator and Wheelchair Lift Service and RepairThis subcontract opportunity is for the provision of preventive maintenance and emergency repair services for elevator and wheelchair lift systems within the Hayward Unified School District. The scope of work encompasses hydraulic, electric, electronic, and pneumatic systems, including the servicing of pump units, valves, controllers, and wire ropes. Additionally, the contractor is responsible for conducting annual fire alarm smoke tests and five-year load testing to ensure all systems are fully operational and compliant, providing certified reports upon completion. Qualified bidders must hold a valid California C-11 Elevator Contractor license and undergo a fingerprinting process. The project is located in Hayward, California, and falls under NAICS code 238290. Interested parties must submit their responses by the deadline of November 17, 2026.

Hayward Unified School District

POSTED

about 7 hours ago

DEADLINE

Districtwide Elevator And Wheelchair Lift Service, Preventive Maintenance, And Repairs Maintenance Services

Solicitation # 27.004

The Hayward Unified School District is soliciting bids under solicitation number 27.004 for districtwide elevator and wheelchair lift service, preventive maintenance, and repairs. The selected contractor will be responsible for the systematic examination, maintenance, and repair of all owned or leased systems, including hydraulic, electrical, and mechanical components, to ensure they remain in safe and usable condition. This contract requires the provider to hold an active C-11 Elevator Contractor license from the State of California and comply with all local and state codes, including Title 24 of the California Code of Regulations. The award will be granted to the lowest responsive and responsible bidder based on the rates provided in the bid form. Performance of regular services typically occurs Monday through Friday during standard business hours, while emergency repairs must be available 24 hours a day, seven days a week. The contractor must provide a bid bond of at least 10 percent of the bid amount and subsequently provide payment and performance bonds upon award. Invoicing is conducted monthly, with a requirement that authorized materials be invoiced at no more than 15 percent above the vendor's cost. Key compliance requirements include paying prevailing wages per the California Labor Code, submitting to fingerprinting and felony conviction certifications, and maintaining a minimum one-year warranty on work. All contracts are governed by the laws of the State of California.

Hayward Unified School District

POSTED

about 7 hours ago

DEADLINE

Elevator InstallationThis subcontract for the City of Hawthorne, California, involves the installation and testing of commercial elevator systems for a multi-level municipal facility. The scope of work requires the provision of elevator cabs and control systems to enable vertical transit between an underground parking structure, the City Hall expansion floors, and the Civic Park. The selected contractor is responsible for delivering fully operational and certified systems to the prime contractor. The project is categorized under NAICS code 238290 and is located in Hawthorne, California, zip code 90250. Interested parties must submit their responses by the deadline of January 27, 2027.

City of Hawthorne, California

POSTED

about 7 hours ago

DEADLINE

Pharmacy Equipment Installation and Assembly TechnicianThis subcontract opportunity is for a Pharmacy Equipment Installation and Assembly Technician to support prime contractors on Department of Veterans Affairs projects. The selected provider will be responsible for the physical assembly, installation, and setup of pharmacy workstations and kiosks at the Oakland VA Clinic. Key duties include unpacking equipment, coordinating staging, protecting finished surfaces, and managing waste removal to ensure the delivery of fully operational workstations. The project falls under NAICS code 238290 and requires the contractor to provide all necessary general assembly tools and site safety gear, such as hard hats and vests. Interested parties must submit their responses by November 3, 2026, for work to be performed in Oakland, California, under the direction of Rpo West.

Rpo West (36C24W)

POSTED

about 7 hours ago

DEADLINE

Pneumatic Tube System InstallationThis subcontract opportunity, managed by the Department of Veterans Affairs Network Contract Office 12, involves the supply and installation of a new vacuum tube system at the Edward J. Hines VA Hospital. The project requires the integration of new systems with existing Swisslog pneumatic tube infrastructure, encompassing conceptual routing, station installation, and vertical transitions. The final deliverable is a fully operational, integrated system connecting Building 1 to Buildings 200, 217, and 221, with a strict requirement to adhere to VA infection control standards. The procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. Interested parties must submit their responses by November 16, 2026. The work will be performed in Hines, ensuring critical medical transport infrastructure is modernized and expanded across multiple hospital buildings.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 7 hours ago

DEADLINE

HVAC Control System Integration (Non-JCI to JCI FX 80/90)This subcontract opportunity with Navfacsyscom Southeast involves the technical configuration and integration of non-JCI digital controllers for HVAC projects located in Corpus Christi. The selected provider will be responsible for programming databases and graphics using JCI FX 80/90 software, downloading configuration files to Network Automation Engines, and validating system communication through BACnet and Modbus TCP/IP. The ultimate goal is the delivery of a fully operational and integrated HVAC control system managed via the JCI FX 80/90 platform. The project falls under NAICS code 238290 and is managed under the Department of Defense. Interested parties must submit their responses by November 18, 2026, following the posting date of October 28, 2026.

Navfacsyscom Southeast

POSTED

about 7 hours ago

DEADLINE

Fire Alarm Control IntegrationThis subcontract opportunity, titled Fire Alarm Control Integration, is issued by the Department of Veterans Affairs Network Contract Office 02. The project involves performing critical life-safety system integration for prime contractors at VA medical centers, specifically in Montrose. The scope of work includes the installation of addressable control modules to ensure fire alarm signals properly trigger HVAC fan unit shutdowns, elevator emergency recall controls, and electronic door lock release systems, all while maintaining strict adherence to NFPA life-safety standards. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. Interested parties must submit their responses by the deadline of December 16, 2026. The primary objective is to deliver fully integrated facility control functions that are seamlessly triggered by the fire alarm system to ensure occupant safety.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 7 hours ago

DEADLINE

in about 2 months

The Supply & Installation of Replacement Communal Laundry Equipment

Solicitation # ocds-h6vhtk-079202

The London Borough of Hillingdon is seeking an experienced service provider for the replacement of communal laundry equipment across 11 sheltered housing sites. The project involves the supply and installation of 25 washing machines and 18 tumble dryers, specifically Electrolux models or equivalents, with a strict requirement that units be installed single file rather than double stacked. The scope of work includes the removal and disposal of old equipment, the relocation of up to seven machines under five years old, and comprehensive site preparation. This preparation encompasses testing and certifying electrical isolators to BS7671 standards, overhauling water isolation valves, and upgrading dryer ventilation from flexible to rigid ducting. The contract, estimated at 100,000 GBP excluding VAT, is reserved for UK suppliers, SMEs, and VCSEs. The selected provider must ensure all installations comply with the Equality Act 2010 and manufacturer instructions, providing a minimum 12-month warranty and six-monthly servicing for the first year. Key deliverables include O&M manuals with full spares lists and A3 laminated instructional posters for each laundry room. The award will be based on a weighted evaluation of 50 percent quality and 50 percent price. The estimated period of performance runs from 1 January 2027 to 1 June 2027.

London Borough of Hillingdon

POSTED

about 9 hours ago

DEADLINE

More opportunities from Sourcewell

Same awarding agency

Post-Installation Maintenance & SupportThis subcontract opportunity with Sourcewell, identified under NAICS code 811212, focuses on providing post-installation maintenance and technical support for displays installed by prime contractors on master agreement projects. The selected provider will be responsible for ensuring operational uptime through ongoing repairs, the replacement of consumables and LED modules, and the delivery of comprehensive maintenance reports using specialized diagnostic tools. To be eligible for this contract, the service provider must hold status as a manufacturer-authorized service provider to perform necessary warranty services and technical repairs. Interested parties must submit their responses by the deadline of December 1, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Logistics & Specialized FreightThis subcontract for Logistics and Specialized Freight, managed by Sourcewell, involves the transportation and delivery of oversized electronic displays for prime contractors working on master agreement projects. The scope of work requires the use of flatbed trucks and cranes to ensure the safe handling and unloading of sensitive electronics. To qualify for this engagement, providers must maintain full DOT compliance and hold specialized handling certifications for fragile electronics. The primary objective is the secure delivery of equipment to the participating entity, with the response deadline for this opportunity set for December 1, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Systems Configuration & Software ImplementationThe Systems Configuration and Software Implementation subcontract through Sourcewell involves providing specialized technical services for prime contractors on master agreement projects. The scope of work includes the configuration of control software, server hardware, and network switches, as well as overall system integration and technical setup. The ultimate goal is the delivery of a fully configured and tested software control system tailored for display operations, complemented by comprehensive end-user training. To be eligible for this engagement, providers must hold specific software certification from the equipment manufacturer. This opportunity falls under NAICS code 541512 and was posted on October 13, 2026, with a response deadline set for December 1, 2026.

Computer Systems Design Services

POSTED

DEADLINE

in about 1 month

Electrical Integration & Power DistributionThe Electrical Integration and Power Distribution subcontract, issued by Sourcewell, involves providing specialized electrical wiring, power configuration, and grid integration services for prime contractors on master agreement projects. The scope of work includes the installation of electrical conduits, cabling, and power distribution units to ensure that display systems and boards are fully operational with reliable power supply and connectivity. To qualify for this contract, providers must employ a Licensed Master Electrician and ensure all work strictly adheres to the National Electrical Code. Interested parties must submit their responses by December 1, 2026, under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Specialized Installation & Rigging ServicesThis subcontract for Specialized Installation and Rigging Services, issued by Sourcewell, involves the physical installation, setup, and mounting of heavy digital displays for prime contractors on master agreement projects. The scope of work includes mobilization, demobilization, and the physical mounting of systems in indoor arenas or outdoor stadiums. To ensure successful delivery, the contractor must utilize heavy lifting equipment, rigging gear, and structural supports while strictly adhering to local building codes and OSHA safety standards. The opportunity is categorized under NAICS code 238990 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of December 1, 2026. The final deliverable for this contract is the provision of fully installed and secured display systems.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Digital Display & Video Board ManufacturingThis subcontract agreement through Sourcewell focuses on the manufacturing and delivery of current-model digital displays, video boards, and scoreboards for prime contractors working on master agreement projects. The scope of work includes the production of essential hardware such as LED panels and video controllers, with a specific requirement for outdoor-rated weatherproofing to ensure durability. All equipment provided under this contract must adhere to industry standard regulatory codes and be backed by standard warranties. The successful provider is responsible for the physical delivery of the hardware to the participating entity. The solicitation period is open from October 13, 2026, with a response deadline of December 1, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

Scoreboards, Digital Displays, and Video Boards with Related Services

Solicitation # 120126

Sourcewell, a Minnesota local government unit and service cooperative, is soliciting proposals under RFP 120126 for a master agreement to provide scoreboards, digital displays, and video boards with related services. This procurement solution is intended for use by thousands of participating entities, including governmental, nonprofit, tribal, and educational agencies across the United States and Canada. The scope of work focuses on turn-key solutions for indoor and outdoor applications, including athletic scoring systems, large-format LED displays, digital signage, and integrated audio and production systems. Related services such as design, installation, commissioning, and maintenance are also required, though the solicitation specifically excludes solutions that are exclusively focused on audio, software, or accessories. The resulting master agreement will have an initial term of four years, with the possibility of three one-year extensions and further extensions under exceptional circumstances. Awards will be granted to the highest-scoring proposers based on overall quality, product selection, and price, with an estimated annual transaction value of 80 million dollars. Proposals must be submitted in English via the Sourcewell Procurement Portal by December 1, 2026, at 3:30 p.m. Central Time. Sourcewell encourages participation from small, minority-owned, women-owned, and veteran-owned business enterprises. Proposers must remain valid for 150 days following the due date and must comply with all industry standards and regulations to avoid disqualification.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Automation, Telematics, and Software SupplyThis subcontract, titled Automation, Telematics, and Software Supply, involves the provision of specialized technology for monitoring and controlling recycling equipment. The scope of work focuses on supporting prime contractors who deliver material processing solutions to government, education, and nonprofit entities. Key deliverables include control systems, telematics, monitoring software, and various automation technologies such as sensors and hardware, culminating in the delivery of installed software and operational monitoring systems. Managed through Sourcewell under NAICS code 541511, the opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. The contract ensures that material processing solutions are equipped with the necessary digital infrastructure to maintain operational efficiency and oversight for public and nonprofit sector clients.

Custom Computer Programming Services

POSTED

DEADLINE

Equipment Installation and Technical ServicesThe Equipment Installation and Technical Services subcontract, issued by Sourcewell, focuses on the installation, commissioning, and ongoing maintenance of material processing equipment. The scope of work involves supporting prime contractors who provide solutions to government, nonprofit, and educational entities. Key technical responsibilities include the setup, configuration, integration, inspection, repair, and refurbishment of equipment, utilizing specialized industrial tools to ensure operational readiness and the delivery of detailed maintenance reports. This opportunity is categorized under NAICS code 811310 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of November 24, 2026. The contract emphasizes field service expertise to ensure that all commissioned equipment meets the necessary specifications for the end-user organizations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Construction and Demolition (C&D) Processing Equipment SupplyThis subcontract through Sourcewell focuses on the supply of heavy equipment designed to reduce and process construction and demolition debris. The scope of work involves providing operational machinery, specifically crushers, pulverizers, and breakers, to handle concrete and masonry debris. These material processing solutions are intended for prime contractors who serve government, education, and nonprofit entities. The opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. It is categorized under NAICS code 339999, reflecting the specialized nature of the processing equipment required for these large-scale debris management projects.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Compost and Mulch Processing Equipment SupplyThis subcontract through Sourcewell focuses on the supply of specialized equipment for processing compost and mulch. The scope of work involves providing operational machinery, specifically compost turners, windrow turners, and aeration equipment designed for organic waste. These supplies are intended for prime contractors who deliver material processing solutions to government, education, and nonprofit entities. The opportunity is categorized under NAICS code 339999 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of November 24, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Screening and Sizing Equipment SupplyThis subcontract, titled Screening and Sizing Equipment Supply, involves the provision of specialized equipment used for sorting and sizing recyclable or recoverable materials. The scope of work focuses on delivering operational screening solutions, including trommel, star, deck, vibrating, and disc screens, specifically designed for processing organic and construction waste. These supplies are intended for prime contractors who provide material processing solutions to government, education, and nonprofit entities. Managed by Sourcewell under NAICS code 339999, the opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. The contract ensures that the necessary hardware is available to facilitate efficient waste recovery and material processing across various public and non-profit sectors.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Radiation Shielding Installation

POSTED

over 1 year ago

DEADLINE

in over 3 years

Seismic and Vibration Control Installation

POSTED

over 1 year ago

DEADLINE

in over 3 years

Insulation Installation – Thermal and Acoustic

POSTED

over 1 year ago

DEADLINE

in over 3 years

Foam Fire-Extinguishing System Installation

POSTED

over 1 year ago

DEADLINE

in over 3 years

Fire Suppression Systems – Special Hazards

POSTED

over 1 year ago

DEADLINE

in over 3 years

Radiation Protection Shielding Installation

POSTED

over 1 year ago

DEADLINE

in over 3 years

Radiation and Electromagnetic Shielding Installation

POSTED

over 1 year ago

DEADLINE

in over 3 years

Metal Deck Preparation and Priming

Virginia Community College System

POSTED

over 1 year ago

CLOSED

over 1 year ago

Asbestos Encapsulation Coating Application

POSTED

over 1 year ago

DEADLINE

in over 3 years

Purchase and Delivery of the Specified Conveyor (No Substitutions), Removal and Disposal of Existing Conveyor, and Install of Conveyor. Removal and Install Fall Under Public Works.

Solicitation # PW ITB 6337-25

City of Spokane

POSTED

over 1 year ago

CLOSED

over 1 year ago

Academy St. Flag Plaza

Solicitation # 2025-0403

Lincoln County NC

POSTED

over 1 year ago

CLOSED

over 1 year ago

RFQ20255970 Automatic door opener

Solicitation # RFQ-2025-5970

City of Yonkers/Yonkers Public Schools

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS