This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Radiator

Closed

SPMYM4-26-Q-0831Federal

Submission Closed08/07/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # W911S226U3981

The Bobcat Toolcat UW56 must be equipped with a 61-horsepower turbo diesel engine and weigh between 5,800 and 6,000 pounds, featuring a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive, limited slip differentials, and an all-wheel steer system. The machine must have a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction technology, front windshield wipers, an AM/FM radio with weather band, a backup camera, a horn, exterior mirrors, and a keyless start system. It must include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, a beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel tank. Hydraulic capabilities require auxiliary hydraulics at 18 gallons per minute, high-flow hydraulics at 27 gallons per minute, pressure-relieved hydraulic remotes, and a 7-pin electric attachment control kit, along with joystick controls for implements and a skid steer style coupler with a hydraulic quick-change system. The machine must come with a 62-inch dirt bucket featuring a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower dependent on high-flow hydraulics, a hydraulic dump box with a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The procurement includes all parts and service manuals, a scannable unique identification label, onsite operator training, and delivery to Fort Drum, NY. This solicitation is a Small Business Set Aside under NAICS code 333618, issued by the Department of Defense via W6QM Micc-Ft Drum, with proposals due by August 14, 2026.

POSTED

DEADLINE

Solicitation # FA483026Q0052

The 23d Contracting Squadron at Moody AFB, GA, is conducting market research under FAR Part 10 to identify qualified sources capable of supplying twenty Raider 65 HP Multi-Fuel Outboard Motors or their functional equivalent for use on Wing P4.7 inflatable craft in amphibious, littoral, and riverine operations. This is strictly a Sources Sought notice and not a solicitation—no contract will be awarded, and no reimbursement will be provided for response costs. The requirement is for fully submersible, 65 HP, two-stroke, inline three-cylinder engines with true multi-fuel capability, operating reliably on JP-5, JP-8, Jet-A, F-24, Diesel, and Standard Unleaded Gasoline without internal modifications. Each motor must have a post-submersion de-watering system allowing restart within five minutes, a maximum dry weight of 178 lbs, a 20-inch long shaft, and include a 6-gallon tactical fuel bladder, submersion/de-watering tool kit, and operator and maintenance manuals in both digital and hard copy. Equipment must be air deployable, qualify for military EPA exemptions, and be factory-tested prior to shipment. The North American Industry Classification System code is 333618 with a small business size standard of 1,500 employees, and the procurement is designated as a Total Small Business Set-Aside under FAR 19.5. Responses must include company name, address, CAGE code, SAM UEI, point of contact details, business size and socioeconomic status, estimated lead time, evidence of full capability, and post-sale support services. The government will not accept partial responses—companies must be able to support all requirements. All submissions must be sent via email to SSgt Landon Docherty and CC'd to Amanda McKaig by 10:00 AM EST on Thursday, July 9, 2026, using the specified subject line and limited to .pdf, .doc, or .xls attachments. The place of performance is Fort Moore, Georgia.

POSTED

DEADLINE

Supply of High-Performance Burner Systems

Hq Usasoc Contracting

POSTED

DEADLINE

Mechanical Overhaul of High Expansion Foam (HEF) PumpsThe contract requires the complete mechanical overhaul of eight Edwards Pentair Model 80-440 High Expansion Foam pumps, including inspection, disassembly, cleaning, repair, reassembly, and performance testing to meet both manufacturer specifications and military standards. All work must ensure the pumps are restored to optimal operational condition, with rigorous adherence to quality control protocols expected throughout each phase of the overhaul process. The effort is scoped to deliver fully functional units capable of meeting mission-critical foam system requirements. This is a Small Business Set Aside contract under NAICS code 333618, posted by the Department of Defense through the MSCHQ Norfolk office, with responses due by August 20, 2026. The type is a subcontract, indicating it is being procured as part of a larger contractual arrangement, and the work must be performed in accordance with federal acquisition regulations applicable to small business set-asides. While the exact location of performance is not specified, all activities must satisfy the operational and logistical demands of the military user, ensuring reliability and readiness for deployment in defense-related applications.

POSTED

DEADLINE

61--MOTOR,ALTERNATING C

Solicitation # SPE7M126T267R

The contract seeks the procurement of one unit each of MOTOR, ALTERNATING C, with NSN 6105015081601, to be delivered to USS SAN ANTONIO LPD 17 within 20 days of award. Two identical line items are listed, each requesting one unit, indicating a total requirement of two units. Only approved sources are authorized to respond: 20019 with part number 143005-11 and 63743 with the same part number. The solicitation is issued as an RFQ under number SPE7M126T267R, with no hard copies available; all documents must be accessed electronically via the provided SAM.gov link. Technical specifications, plans, or drawings are not provided, and responsible sources are encouraged to submit quotes electronically before the deadline of August 17, 2026. The solicitation was posted on August 6, 2026, and is managed by the DLA Land and Maritime office in Columbus, Ohio, under NAICS code 333618. All inquiries must be directed to the designated point of contact via email, with further information accessible through the DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

DEADLINE

ODF-B FY26 Outboard Engines Supply

Solicitation # W912DQ26QA073

W071 Endist Kansas City

POSTED

DEADLINE

29--FILTER ELEMENT,INTA

Solicitation # SPE7L126T939Y

The contract is for the procurement of 24 filter elements with NSN 2940123874052 under a Small Business Set Aside, designated as a Total Set Aside for small businesses. The solicitation, numbered SPE7L126T939Y, was posted on August 6, 2026, and requires quotes to be submitted electronically by August 17, 2026. Delivery is to DLA Distribution San Diego within 168 days after award. Only two approved sources are listed: 72582 X00021909 and D8266 X00021909, and no specifications, plans, or drawings are available. The procurement is administered by the DLA Land and Maritime office in Columbus, Ohio, and is classified under NAICS code 333618. All responsible sources may submit quotes provided they are received on time, and hard copies of the solicitation are not distributed. The official solicitation must be accessed via the SAM.gov link provided, and inquiries should be directed to the designated point of contact via email as outlined in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

PLATE SUPPORT, PLATE OIL COOLER, ENGINE

Solicitation # 70Z08026Q20899B00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for two critical engine components for its 154’ Fast Response Cutters: the Plate Support (NSN 2930-01-729-6030, OEM PN MTUX59420200252) and the Plate Oil Cooler, Engine (NSN 2930-12-400-5228, OEM PN X59420300055), each requiring a quantity of eight units, both manufactured by ROLLS-ROYCE SOLUTIONS GMBH. This solicitation, issued under SAM.gov as 70Z08026Q20899B00, is a combined synopsis and solicitation governed by FAR Subpart 12.6 and falls under NAICS code 333618 with a small business size standard of 700 employees. Award will be made on a lowest price technically acceptable basis as a Firm Fixed Price contract, with selection limited to responsible offerors who meet all mandatory requirements. The acquisition is strictly for brand-name parts; substitutes or “equal” items are only considered if they conform to all salient physical, functional, or performance characteristics and are formally approved by the Coast Guard. All items must be individually packaged in compliance with MIL-STD-2073-1E Method 10, cushioned and enclosed in ASTM-D5118 double-wall fiberboard boxes; standard commercial packaging is unacceptable and will result in rejection. Each package must be marked per MIL-STD-129R and barcoded using ISO/IEC-16388-2007 Code 39 symbology. Vendors unable to meet packaging requirements may use a third party but must disclose associated costs in their quote. Delivery is F.O.B. Destination to the USCG Surface Forces Logistics Center at 2401 Hawkins Point Road, Baltimore, MD 21126, Building 88, Receiving Room. Offerors must be registered in SAM.gov with a valid UEI, provide a Tax Identification Number, and submit a completed FAR 52.212-3 with Alternate I. Additional mandatory disclosures include status as an inverted domestic corporation under HSAR 48 CFR 3009.104-70 through 3009.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

29--CONNECTOR,EXHAUST P

Solicitation # SPE7L526T4852

The contract seeks the procurement of 11 units of NSN 2990123860874, CONNECTOR, EXHAUST P, with delivery required to W1A8 DLA DISTRIBUTION within 168 days after award. Only approved sources, specifically 72582 and D8266 with part number X56914200138/87, are eligible to respond. The solicitation is issued as a Request for Quote under number SPE7L5026T4852 and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. All responsible sources may submit quotes provided they are received before the August 17, 2026 deadline, but submissions must be made electronically. The requirement is designated as a Small Business Set Aside under NAICS code 333618, meaning only small businesses can compete. No technical specifications, plans, or drawings are provided, and all information is limited to what is contained in the official solicitation. Questions must be directed via email to the designated buyer, with further details accessible through the DIBBS portal using the solicitation number. The awarding office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.

DLA Land And Maritime

POSTED

DEADLINE

61--MOTOR ASSEMBLY,ELEC

Solicitation # SPE7M126T265Y

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for two electric motor assemblies under NSN 6105017003079, with delivery required to W1A8 DLA DISTRIBUTION within 168 days after award. The solicitation is a Small Business Set Aside, total, meaning only small businesses are eligible to compete, and the NAICS code is 333618. The approved source for this item is EC-23050-22, with the contract number SPE7M1126T265Y. All quotes must be submitted electronically through the SAM.gov portal, and no hard copies of the solicitation are available. The RFQ is open to all responsible sources that meet the small business criteria, and no specifications, plans, or drawings are provided beyond the basic item description. The response deadline is August 17, 2026, and inquiries must be directed via email to the designated point of contact listed in the solicitation document. The contracting office is located in Columbus, Ohio, and the solicitation was posted on August 6, 2026.

DLA Land And Maritime

POSTED

DEADLINE

29--COVER,INTAKE MANIFO

Solicitation # SPE7L426U1061

The solicitation seeks quotations for 121 units of NSN 2990016874238 COVER, INTAKE MANIFO under an RFQ with a response deadline of August 21, 2026, issued by the Department of Defense through DLA Land and Maritime in Columbus, Ohio. The award may result in an Automated Indefinite Delivery Contract with a term of one year or until aggregate orders reach $350,000, whichever comes first, with an estimated two orders per year and a guaranteed minimum of 18 units. All items will be shipped to various DLA depots across CONUS and OCONUS using consolidation and containerization protocols. The approved source for this item is 3Z9L5 123078, and only electronic submissions are accepted; hard copies are not available. No detailed specifications, plans, or drawings are provided, and all responsible sources may submit quotes provided they are received on time. The solicitation number is SPE7L426U1061, and inquiries should be directed to the designated buyer contact via email listed in the official document accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

DEADLINE

29--FILTER ELEMENT,FLUID

Solicitation # SPE7L126T935Z

The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for 918 fluid filter elements with NSN 2940016706510 under solicitation number SPE7L126T935Z, which is a Small Business Set Aside for total procurement. The requirement is for delivery to DLA Dist San Joaquin via W1A8, with a 111-day delivery window from award. The approved source for this item is identified as 05779 4268224, and only electronic submissions are accepted; hard copies of the solicitation are not available. The RFQ is open to all responsible sources and must be submitted electronically by the deadline of August 17, 2026. No specifications, plans, or drawings are provided, and interested vendors should refer to the SAM.gov portal for the full solicitation document. The North American Industry Classification System code is 333618, and the point of contact for questions is listed via email, directing inquiries to the buyer as identified in the solicitation document accessed through the provided link.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The solicitation numbered SPMYM4-26-Q-0831 seeks radiators under a combined synopsis/solicitation issued under FAR Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information accessible only through SAM.gov. The requirement is exclusively set aside for small businesses, defined as those with 1500 employees or fewer, using NAICS code 33618 and FSC 3950. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with vendor responsibility assessed through SPRS in accordance with FAR 9.104. All offers must be submitted using the official request for quote form attached to the posting, and only one quote per vendor will be accepted. The deadline for responses is August 7, 2026, at 4:00 PM, with the solicitation posted on August 5, 2026. The procurement is managed by DLA Maritime - Pearl Harbor, located in Hawaii, and performance is to occur at JBPHH. Proposers must comply with all applicable clauses and provisions effective through FAC 2025-06 and DFARS Change Notice 20251110, and are responsible for ensuring familiarity with these requirements. Primary point of contact is Floyd Shiroma, reachable via email at floyd.shiroma.civ@us.navy.mil.

General Info

Small business set-aside for radiators, LPTA evaluation, deadline August 7, 2026, via SAM.gov, DLA Maritime Pearl Harbor.

Agency

Department Of Defense → DLA Maritime - Pearl HarborView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

JBPHH, HI, 96860, USA

Set-Aside

SBA

Documents

(2)

FAR Clauses and Evaluation Provisions for Solicitation

PDF•clauses

RFQ SPMYM4-26-Q-0831 Radiator Small Business Set-Aside

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Combined Synopsis

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Maritime - Pearl Harbor

Contacts1 person available

OfficePEARL HARBOR, HI, 96860-5033, USA

Organization / Agency

Department Of Defense → DLA Maritime - Pearl Harbor

View Agency Profile

Office AddressPEARL HARBOR, HI, 96860-5033, USA

Contacts

Floyd Shiroma

contact@example.gov

Full Description

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov.

The RFQ number is SPMYM4-26-Q-0831 Radiator. This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025, and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these address(s):
https://www.ecfr.gov
https://www.acquisition.gov/content/list-sections-affected
http://www.acq.osd.mil/dpap/dars/change_notices.html

The FSC Code is 3950 and the NAICS code is 33618. The Small Business Standard is 1500 employees. This requirement is 100% Small Business Set-Aside.

Evaluation criteria are Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.

DLA Weapons Support, Pearl Harbor requests responses from qualified sources capable of providing the requested item(s). Interested parties must fill out the required request for quote form saved in the attachment section.