Top

Radioactive Materials Handling and Labeling Compliance

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Ensure compliance with handling, labeling, and notification requirements if insulation sleeving or packaging involves radioactive materials.

Similar Contracts

Same NAICS industry code

NAICS: 562910

New

SLED

Eradication and Control of Invasive Aquatic Plant Species in CT Bodies of WaterThis contract covers the comprehensive management of invasive aquatic plant species across Connecticut’s water bodies, encompassing a range of services including aquatic herbicide application, mechanical harvesting, hand-pulling, installation of benthic barriers, monitoring, mapping, inspections, consultation, and detailed reporting. The scope is designed to support eradication, suppression, and long-term control efforts while ensuring environmental compliance and ecological stewardship. Services may be performed by qualified contractors under the authority of the Connecticut Department of Energy and Environmental Protection, with eligibility extended to other state agencies, municipalities, and political subdivisions upon authorization. The solicitation, identified as 26PSX0139, was posted on July 28, 2026, with responses due by August 18, 2026. It is administered through Connecticut’s DAS Procurement office and applies statewide wherever invasive aquatic plants pose a threat to native ecosystems, recreation, or water infrastructure. Primary contact for inquiries is Eva Orlinski, reachable via email at eva.orlinski@ct.gov. All work must be conducted within Connecticut’s water bodies, and the contract is intended for use by eligible public entities seeking to fulfill their regulatory and environmental management obligations related to invasive aquatic vegetation.

POSTED

DEADLINE

The Franklin County Board of Supervisors is reques ng sealed proposals from qualified contractors to provide Emergency Disaster Debris Removal Services in response to the tornado that impacted Franklin County on May 6, 2026. (Federal Disaster Declara onThe Franklin County Board of Supervisors is seeking qualified contractors to provide emergency debris removal services following a tornado that struck the county on May 6, 2026, under a federal disaster declaration. Contractors must submit sealed proposals by the August 14, 2026 deadline to respond to the solicitation numbered 128-20260727132922 FCBS, which is open to qualified firms capable of handling large-scale disaster recovery operations. The work will take place within Franklin County, Mississippi, and contractors will be expected to mobilize quickly, comply with federal and state disaster response protocols, and safely remove, transport, and dispose of debris generated by the storm. The solicitation is managed under the Mississippi Public Transportation and Affairs Program, and all bids must be submitted through the official state portal, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

DEADLINE

Annual Asbestos And Lead Paint Abatement Services Contract

POSTED

DEADLINE

Animal Carcass Disposal and Rendering ServicesThe contract seeks a subcontractor to receive and properly dispose of large animal carcasses using approved methods such as composting, burial, or rendering, ensuring full compliance with environmental and public health regulations. Services must be conducted in accordance with state and federal guidelines to prevent contamination and safeguard natural resources. The work is tied to the Texas Department of Transportation and is expected to support animal carcass management efforts related to transportation incidents or emergency scenarios across the state. The solicitation was posted on July 28, 2026, with responses due by August 18, 2026, and falls under NAICS code 562910 for other waste management services. While the specific location of performance is not detailed, the work is anticipated to occur throughout Texas under the oversight of the Texas Department of Transportation. The contract is structured as a subcontract, and no set-aside provisions or small business preferences are indicated. All interested parties must adhere to regulatory standards and operational protocols to ensure safe, lawful, and environmentally responsible carcass disposal.

Texas Department of Transportation

POSTED

DEADLINE

Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures necessary during construction activities to ensure compliance with environmental regulations. It requires the installation of silt fences, straw wattles, and inlet protection systems designed to prevent soil erosion and sediment runoff into nearby waterways. These measures are critical for maintaining water quality and meeting federal environmental standards throughout the project lifecycle. The work is classified under NAICS code 562910, which corresponds to remediation and other environmental services, indicating a focus on environmental protection and site restoration tasks. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to participate in federal environmental infrastructure projects. The solicitation was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 p.m. The contracting agency is the Department of Commerce, specifically NOAA, though the precise location of performance is not specified, suggesting the work may occur at multiple sites under NOAA’s jurisdiction. The contract emphasizes environmental compliance, requiring strict adherence to best management practices for sediment control during construction phases.

Department Of Commerce Noaa

POSTED

DEADLINE

Fuel Removal at Sector Humboldt Bay Fuel Farm

POSTED

DEADLINE

F108--Mold Remediation: Lyons Campus Building 10 Server RoomThe solicitation for mold remediation at the Lyons Campus Building 10 Server Room, identified by number 36C24226Q0677, is a 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside under NAICS code 562910 with a size standard of $25.0 million. The work is located at the Veterans Affairs New Jersey Health Care System, 151 Knollcroft Road, Lyons, New Jersey 07939, and must be completed within 30 days. The contractor is responsible for providing all labor, supervision, materials, equipment, supplies, sanitized and labeled containers, transportation, facilities, and waste manifests. Scope of work includes establishing containment prior to remediation, cleaning and treating affected surfaces with antimicrobial solutions, applying sporicidal disinfectants, HEPA vacuuming, using antimicrobial coatings and cleaners to inhibit future mold growth, and applying a binding encapsulant with microband as needed. Final acceptance requires negative results from air clearance testing before removal and disposal of contaminants. The estimated contract value ranges between $25,000 and $100,000. All offerors must be registered in SAM.gov and verified as an SDVOSB through www.vip.vetbiz.va.gov at the time of submission and prior to award. Proposals must be submitted electronically; faxed or hand-delivered submissions are prohibited. The solicitation was posted on June 4, 2026, with a response deadline of June 9, 2026, at 10:00 a.m. Eastern Time. The contracting office is the Department of Veterans Affairs Network Contracting Office 02, with Lateisha Robinson as the primary point of contact. All additional details, including evaluation factors, contract clauses, and submission instructions, are to be contained in the full solicitation, which was expected to be released on or about June 12, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

K3E35-241220B - Consulting Services for Hydrometric Monitoring StationThe contract involves consulting services for the FSCAP classification, decommissioning, and reclamation of a creosote-contaminated hydrometric monitoring station located in Racehorse Creek, Alberta, alongside the design and construction of a new passenger-operated cableway. The work is being procured by Environment and Climate Change Canada’s National Hydrological Services under the Federal Contaminated Sites Action Plan to address environmental contamination and restore site functionality. All activities must adhere to federal environmental standards, with a focus on safe removal of contaminants, site reclamation, and the implementation of a durable, accessible cableway for operational use. The solicitation, issued under reference WS5174762016 and titled K3E35-241220B, was posted on July 6, 2026, with a strict bid submission deadline of July 30, 2026, at 2:00 PM Eastern Time. Late proposals will not be accepted under any circumstance. The contract is managed by the Government of Canada through Public Services and Procurement Canada, with Colin Simard listed as the primary point of contact for inquiries. Performance of the work is specifically required at the hydrometric station site in Alberta, and all bidders must ensure their proposals meet technical, environmental, and safety requirements without exception.

Department of Public Works and Government Services

POSTED

DEADLINE

Hazardous Materials Handling and Labeling

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

CATS Fuel Treating and Cleaning of Diesel Storage TanksThe City of Charlotte, through its Charlotte Area Transit System (CATS) Facilities department, is seeking a vendor to provide fuel treating and cleaning services for eight diesel underground storage tanks located across two sites in the Charlotte metro area. The scope includes biocide treatments to prevent microbial growth, thorough tank cleaning to remove contaminants and sediment, and regular fuel sample testing to ensure fuel quality and compliance with operational standards. Services must be performed with strict adherence to environmental and safety regulations to safeguard the integrity of the fuel supply and storage infrastructure. All work is to be completed at the designated CATS facilities within North Carolina, with no alternative locations permitted. The solicitation, identified by number 269-2026-1974, was posted on July 27, 2026, and responses are due by August 24, 2026, at 7:00 PM eastern time. The contract opportunity is open to qualified service providers with demonstrated experience in diesel UST maintenance, fuel conditioning, and laboratory-grade fuel analysis. Andre Branch of the CATS Facilities department is the primary point of contact for inquiries and must be reached via email at andra.branch@charlottenc.gov. Prospective bidders are directed to the Bonfire Hub platform for full solicitation details and submission requirements.

POSTED

DEADLINE

Environmental Remediation (Asbestos-Related Work)The contract requires the performance of environmental remediation activities related to the removal of HVAC systems, with specific focus on asbestos handling in compliance with federal and state regulations. Work must include thorough asbestos testing, installation of proper containment measures, abatement procedures, and safe disposal of hazardous materials, all aligned with EPA, OSHA, and Florida Department of Environmental Protection standards. This subcontract is part of a larger initiative managed by the Florida Department of Transportation, with performance expected to occur within the state of Florida, though exact location details are not specified. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, at 6:30 PM. The NAICS code 562910 classifies this work under Other Remediation Services, indicating specialized environmental cleanup expertise is necessary. Bidders must be prepared to demonstrate full regulatory compliance, qualified personnel, and appropriate equipment for asbestos abatement operations.

Florida Department of Transportation

POSTED

DEADLINE

Hazardous Materials Handling and Safety ComplianceThe contract requires comprehensive handling, labeling, and documentation of hazardous materials on-site at a location in Boston, Massachusetts, with strict adherence to federal OSHA standards and Massachusetts Right-to-Know Law. All materials must be properly identified, stored, and labeled according to regulatory requirements, and complete Material Safety Data Sheets or Safety Data Sheets must be submitted and maintained in compliance with legal mandates. The work involves consistent operational diligence to ensure workplace safety and regulatory compliance, with responsibilities extending to accurate recordkeeping and timely reporting of hazardous substance information. This is a subcontract solicited by the Massachusetts Procurement Agency under NAICS code 562910, with a response deadline of August 12, 2026, at 5:00 PM. The solicitation was posted on July 27, 2026, and the performance location is specified as Boston with a zip code of 02201. No set-aside type is designated, and the contract does not include a designated point of contact. All potential bidders must ensure full alignment with both state and federal hazardous materials regulations to meet the terms of performance and compliance obligations.

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 335311

New

DIBBS

BATTERY BOXThe contract pertains to the procurement of 10 battery boxes under NSN 6160-01-651-4898 and part number 717966, supplied by MILTOPE CORPORATION, with a unit price of $10.00 and a total value of $100.00. Delivery is required FOB origin within 221 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and intermediate container designation DO, while marking adheres strictly to MIL-STD-129 with no special marking codes applied. The items must be palletized in accordance with DLA packaging requirements, and the designated delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces rigorous quality assurance protocols, mandating sampling in alignment with MIL-STD-1916 or an equivalent zero-based method, where critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major, and zero non-conformances are required for acceptance unless otherwise stated. The solicitation number SPE7L7-26-T-4486 was issued on July 28, 2026, with responses due by August 10, 2026, and the contract falls under NAICS code 335311 for electrical equipment manufacturing. Transportation logistics are governed by DLA procedural notes C19 and C20, and the primary point of contact is Kurt Becka at the Department of Defense’s DDSP New Cumberland Facility.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

RETAINER, SPARE TIREThe contract involves the procurement of one retainer for a spare tire, identified by NSN 2590-01-541-1168 and part number 22-62169-101, under solicitation SPE7L7-26-T-4344. Delivery is required within 144 days of award, with FOB Origin terms applying, and the item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each (EA), with no allowable variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, though all requirements from the DLA Master List of Technical and Quality Requirements—including RP001 for palletization and RQ011 for removal of government identification from non-accepted supplies—take precedence. Marking and labeling must strictly follow MIL-STD-129, including barcoding for automated logistics tracking, and the Unit of Issue and Quantity per Unit Pack must be clearly indicated. The contract incorporates multiple FAR clauses governing contract type, inspection, default, changes, subcontracting, and safeguarding of information systems, with deviations referencing 2026-00038 affecting several provisions. The contracting officer has identified the use of Alternate I for the Type of Contract clause and Alternate II for Authorization and Consent, indicating a fixed-price, non-negotiable structure. Special requirements mandate the submission of Safety Data Sheets for any hazardous materials under Federal Standard No. 313, pre-award disclosure of hazard labels, and written notification if the item contains radioactive material exceeding 0.01 microcuries. Flow-down obligations extend to subcontractors for environmental, safety, and labeling compliance. The solicitation requires electronic submission through DIBBS by July 31, 2026, and mandates registration and current representation in the System for Award Management, including UEI and CAGE code verification. Invoicing must be processed through WAWF, and while pricing details are not populated, the item is single-line with no option quantities specified, reflecting a straightforward, non-IDIQ acquisition under simplified procedures.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

ARMOR PLATEThe contract is for the procurement of four units of armored plate made from wrought steel that has been quenched and tempered, identified by part number 9379897 and NSN 9515-01-268-3376. The requirement is issued under solicitation SPE8E4-26-T-1936 as a total small business set-aside under NAICS code 331221, with a response deadline of August 10, 2026 and a delivery requirement of 94 days after contract award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance tied to the revision in effect on the solicitation issue date. The item is subject to stringent export control under ITAR or EAR, restricting disclosure of technical data to authorized parties only, including mandatory adherence to DFARS 252.225-7048 and requiring recipients to hold JCP certification, complete required DOD training, and receive specific DLA authorization. Manufacturers and non-manufacturers must comply with tailored higher-level quality requirements, configuration change management protocols, and inspection procedures conducted at the origin. Packaging must follow DLA standards, and any non-accepted supplies must have government identification removed prior to return. Cybersecurity compliance requires either a CMMC Level 2 self-assessment or certification by a C3PAO. The contract applies to covered defense information under RD002, and the place of performance is designated as New Cumberland, Pennsylvania with a zip code of 17070-5002. The primary point of contact is Cynthia Linsalata of the DDSP New Cumberland Facility, Department of Defense, with inquiries directed through her provided email and phone number. All technical data handling, cybersecurity, export control, and quality procedures are binding obligations for any bidder or contractor.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

INSULATION BLOCK, THERMThe contract is for the procurement of six thermal insulation blocks with part number 5640-01-368-4621, issued under solicitation SPE8E6-26-T-3891 by the Defense Logistics Agency through the DDSP New Cumberland Facility. Delivery is required within 160 days of award, with responses due by August 10, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire and received official approval may access this controlled data. The contract also requires compliance with DLA packaging standards, configuration change management procedures, and CMMC Level 2 certification for any third-party assessors involved in cybersecurity matters, with covered defense information protections in force. The solicitation is classified under NAICS code 314999 and has no set-aside designation.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

SOLDERING STATIONThe contract pertains to the procurement of 290 units of a digital soldering station with part number WE1010NA and NSN 3439-01-521-7022, sourced from CAGE 65LN0 Apex Tool Group, LLC. The unit features a digital LCD display, operates within a temperature range of 200 to 850 degrees Fahrenheit, includes a USB port, and draws 85 watts at 120VAC, with dimensions of 5.91 inches in length, 4.72 inches in width, and 3.86 inches in height. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The product is designated as an exact match per the purchase order text, meaning only this specific part number is acceptable. Delivery is required within 60 days of award, and the solicitation number is SPE8E5-26-Q-0359 with a response deadline of August 11, 2026. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, and inquiries should be directed to Brandon Wicker at the provided contact information. This item has no shelf life requirement and may be subject to Covered Defense Information provisions.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

STEM, FLUID VALVEThe contract pertains to the procurement of five STEM, FLUID VALVE units with NSN 4820-01-355-0268 under solicitation SPE7MC-26-T-157Y, issued by the Defense Logistics Agency through the DDSP NEW CUMBERLAND FACILITY. Delivery is required within 86 days of award, and responses must be submitted by August 10, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and questionnaire, are permitted access. The contract also requires CMMC Level 2 certification, ensuring cybersecurity compliance, and adherence to DLA packaging standards. The primary point of contact is Tracy Smith, reachable via email and phone provided, with the place of performance located in New Cumberland, Pennsylvania, under a federal agency procurement classified under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

SHEET, NONMETALLIC, PThe contract pertains to the procurement of nonmetallic protective sheeting under NSN 9390-01-557-0832, with a quantity of 41 units at a unit price of $41.00, totaling $1,681.00. Delivery is required within 61 days from the contract award, with FOB origin terms, and inspection and acceptance both occur at the destination. The material must be packaged in strict compliance with DLA’s RP001 packaging requirements and MIL-STD-129 labeling standards, and if not classified as hazardous under FED-STD-313, it must conform to ASTM D3951 commercial packaging; however, any conflicting DLA Master List technical and quality requirements take precedence. The item is not acceptable as surplus government property, and any government identification must be removed from non-accepted supplies. Packaging must be palletized per DLA guidelines, and the specified delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The shipping and delivery timelines are tightly controlled, with an original required delivery date of March 23, 2026, and a need ship date of April 27, 2026. The procurement is governed by solicitation SPE8E5-26-T-3722, issued under a DoD acquisition framework, and references applicable technical and quality standards defined in the DLA Master List. The point of contact for inquiries is Alexis Canalichio, and the contract falls under NAICS code 327215 for nonmetallic mineral product manufacturing.

Glass Product Manufacturing Made of Purchased Glass

POSTED

DEADLINE

VALVE, SOLENOIDThis contract specifies the procurement of a solenoid valve identified by NSN 4810-01-342-6722, with a quantity of 30 units, under solicitation SPE7MC-26-T-158B, a Service-Disabled Veteran-Owned Small Business Set-Aside. The valve must have a copper alloy body and is designated as a critical application item requiring government engineering source approval due to its restricted sourcing status. Manufacturing may involve casting or forging with specialized tooling, for which the government may not retain ownership, necessitating a formal Casting and Forging Assistance Request for sourcing support. The item is strictly prohibited from containing or coming in direct contact with mercury or mercury compounds, except for specific exempted applications such as functional batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA; where mercury is permitted, portable devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with each unit individually packaged using die-cut cushioning to immobilize the valve, prevent puncture, and ensure even weight distribution within the container. The delivery point is FOB origin with inspection and acceptance occurring at destination, and the required delivery window is 161 days from the contract award, with a specified ship date of January 19, 2027. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and must adhere to all DLA packaging and marking standards, including the prohibition of special marking codes.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FLThe contract is for the procurement of 19 units of a bronze fluid pressure regulating valve with a 1/2 inch size, identified by the NSN 4820-01-210-8757 and corrected part number U301195701. The item is governed by DLA packaging requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Delivery must be completed within 190 days after award, and the government requires proper identification and handling procedures, including removal of government markings from non-accepted supplies. The solicitation, issued under SPE7MC-26-T-094M, was posted on July 28, 2026, with responses due by July 31, 2026, and is classified under NAICS code 332912 for other fabricated metal product manufacturing. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Nicole Betts, reachable via email at fmdet1956@dla.mil or phone at 614-692-3506, and the solicitation can be accessed through the DIBBS portal.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

ROD SUBASSY, PROTECTORThis contract pertains to the procurement of a Rod Subassembly, Protector, identified by NSN 4420-01-400-2671 and part numbers supplied by Fluid Handling LLC, with a total quantity of 138 units to be delivered in 96 days under a Total Small Business Set-Aside. All items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging, labeling, and marking standards per MIL-STD-129, with no special marking required. Deliveries are FOB origin and inspection and acceptance occur at the destination, with a strict zero variance allowed in quantity. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment barrier. Packaging and shipment must adhere to DLA’s logistics protocols, with the final delivery address designated as the DDSP New Cumberland Facility in Pennsylvania. The contract incorporates technical and quality standards referenced from the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. The solicitation number is SPE8E8-26-T-4865, issued under NAICS code 332410, with responses due by August 10, 2026, and the original required delivery date set for January 19, 2027, though the needed ship date is February 27, 2024.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

TEST SET, OPTICAL POThe contract pertains to the procurement of a TEST SET, OPTICAL PO with part number 74D440500-1003 and NSN 6650014605837, for a quantity of ten units, delivered FOB origin with no variance allowed in quantity. Delivery is required within 793 days from the contract date, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129 without any special markings. The item is classified as a critical application item under The Boeing Company and is subject to tailored higher-level quality requirements and DLA packaging standards. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The contractor must meet cybersecurity requirements under CMMC Level 2 via self-assessment and comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Documentation for source approval, measuring and test equipment, and procurement procedures must be followed as outlined. The purchase request number is 7015689189, and the contract is issued under solicitation SPE7L7-26-T-4481, with a required need ship date of October 12, 2028. All transportation and shipping details are governed by DLAD procedural notes, and the point of contact for inquiries is Tiffany Merritt of the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEFThe contract specifies the procurement of four stainless steel safety relief valves with a .50 inch size and a 40 psi set pressure, identified by part number RV51-158-2 and NSN 4820015390989, supplied by CIRCOR AEROSPACE, INC. Delivery is required within 166 days of award, with a final delivery date of March 22, 2027, and an original ship date of December 23, 2026. The valves must be delivered FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination facility located at DDSP New Cumberland, Pennsylvania, and all packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Palletization must meet RP001 DLA Packaging Requirements for Procurement. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds except for specific exempted applications such as batteries, instruments, weapon systems, and specified chemical reagents, and all such exempted items must include a secondary containment. Class I ozone-depleting chemicals are also explicitly banned. Invoicing must be submitted exclusively through Wide Area WorkFlow (WAWF), and safety data sheets must be provided for any hazardous materials. The contract mandates compliance with DOD cybersecurity standards per NIST SP 800-171 and includes clauses related to equal opportunity, trafficking in persons, employment eligibility, sustainable products, and small business representation, with alternate clauses applicable for multiple-award contracts. The solicitation requires electronic submission via DIBBS and includes flow-down obligations to subcontractors for all applicable technical, environmental, and compliance requirements. No unit prices or total contract value are provided, and the contract type is unspecified. Offerors must affirm small business status, UEI and CAGE codes, and other socioeconomic representations as applicable, though no specific responses from potential vendors are included. Failure to comply with any of these requirements, especially regarding prohibited substances, labeling, packaging, or shipping procedures, constitutes nonconformance and may result in rejection or rejection of payment.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days

View Details