This Government Contract opportunity from National Transportation Safety Board was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Radiological Image Post-Processing and Analysis

Closed

Federal

Submission Closed08/03/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

POSTED

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the performance of advanced post-processing tasks on computed tomography and digital radiography data, including three-dimensional reconstruction, automated defect detection, precise annotation of anomalies, and the generation of detailed technical reports using specialized imaging software. These services are critical for enabling precise analytical outcomes from radiological imagery and must be executed with high accuracy and adherence to industry standards. The work is to be performed remotely or on-site at the National Transportation Safety Board’s facilities in Washington, D.C., with the deliverables directly supporting investigative and safety analysis missions. This subcontract, issued under NAICS code 541380 for other scientific and technical consulting services, was posted on July 6, 2026, with a submission deadline of August 3, 2026. The contracting authority is the NTSB Acq Lease Management Division, indicating the requirement stems from internal operational needs rather than broader federal procurement channels. While no set-aside preferences or solicitation number are listed, the nature of the work demands qualified personnel with proven expertise in medical and industrial imaging software, data analysis, and technical documentation. Performance is expected to align with NTSB’s operational protocols and quality benchmarks for imaging-derived evidence.

General Info

Advanced image processing and defect analysis for NTSB using specialized software, delivered remotely or on-site in Washington, D.C.

Agency

National Transportation Safety Board → Ntsb Acq Lease Management Division

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Washington, DC, 20594, USA

Set-Aside

NONE

Documents

This scope was carved out of 9531BM26R0015.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radiological Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 6

subcontract

Response DeadlineAug 3

Deadline has passed

Submission Closed

08/03/2026, 04:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Transportation Safety Board → Ntsb Acq Lease Management Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Transportation Safety Board → Ntsb Acq Lease Management Division

Office AddressN/A

ContactsNo contact information available

Full Description

Perform post-processing of CT and DR data including 3D reconstruction, defect detection, annotation, and technical report generation using specialized imaging software.