Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Red/White Plastic Sheet Manufacturing & Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of 335 units of a specific plastic sheet characterized by a red surface and white core, with dimensions of 1/16 inch thickness and 24 inches by 24 inches per unit. All materials must fully comply with the technical, packaging, and labeling standards established by the Defense Logistics Agency to ensure consistency, quality, and regulatory adherence. The product is intended for delivery to a specified performance location in Tracy, California, with a ZIP code of 95304-5000, and must be produced under the NAICS code 326113, which corresponds to plastic profile shape manufacturing. The contract is structured as a subcontract and was posted on August 5, 2026, with a firm response deadline of August 17, 2026. The contracting authority is DLA Dist San Joaquin under the Department of Defense, and all submissions must be made through the designated DIBBS portal.

General Info

Manufacture and deliver 335 red-surface, white-core plastic sheets to Tracy, CA, per DLA specs by August 17, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

326113 - Unlaminated Plastics Film and Sheet (except Packaging) ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 335 units of red surface, white core plastic sheet (1/16" thick, 24" x 24") compliant with DLA technical, packaging, and labeling standards.

Similar Contracts

Same NAICS industry code

Precision Plastic Sheet Fabrication & SupplyThe contract requires the manufacture and supply of a clear acrylic plastic sheet measuring precisely 60 inches by 36 inches by 0.188 inches thick, engineered to meet strict military specifications and federal marking standards. This component must be fabricated with high dimensional accuracy and material integrity to ensure compatibility with defense systems and equipment, and all delivered units must be properly labeled in accordance with federal compliance requirements. The fabrication process must adhere to quality controls aligned with military-grade production protocols, and the material properties must remain consistent across the entire batch to guarantee performance under demanding operational conditions. This is a subcontract opportunity issued under the North American Industry Classification System code 326113, with the performing location identified as Robins AFB, Georgia, ZIP 31098-1887. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting activity is associated with the Department of Defense through the Warner Robins organization, indicating the end-use is likely tied to military airframe, avionics, or support systems based at the installation. All potential vendors must ensure their production capabilities and compliance documentation align fully with the technical and regulatory demands outlined before submitting a proposal.

POSTED

about 21 hours ago

DEADLINE

Plastic Sheet Supply (NSN: 9330014961954)The contract involves the supply of 27 units of plastic sheet identified by NSN 9330014961954, with all materials required to meet federal standards for material specifications, labeling, and hazard communication. Delivery is structured as FOB Origin, meaning the seller is responsible for the goods until they are loaded at the point of origin, after which any risks or further costs transfer to the buyer. The destination for delivery is the DLA New Cumberland facility, with the specified ZIP code of 17070-5002. The solicitation falls under NAICS code 326113, indicating it pertains to plastic material and resin manufacturing. The contract type is listed as a subcontract, and it was posted on August 5, 2026, with a response deadline of August 17, 2026. The ordering agency is the Department of Defense through its DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3785

The contract specifies a plastic sheet manufactured using the cast method from acrylic, with dimensions of 48 inches long by 36 inches wide and a thickness of 0.187 inches. It must be plain, transparent, colorless, and fully comply with Type 1, Class 1, Finish A requirements as defined by MIL-PRF-8184F, and adhere to QPL 8184, with only QPL-approved manufacturers eligible to supply the product at the time of award. The item is classified as a critical application component, and all technical and quality specifications referenced by R-numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any commercial standards such as ASTM D3951. The product must be packaged in accordance with RP001 DLA Packaging Requirements for Procurement and labeled per MIL-STD-129, with hazardous material handling following FED-STD-313 and TQ requirement IP025 if applicable. The contract calls for 21 ship units with zero variance allowed in quantity and requires delivery FOB origin within 167 days, with the final delivery deadline set for February 1, 2027. Inspection and acceptance occur at the destination, and packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery destination is DLA Distribution Depot Oklahoma at Tinker AFB, with all transportation subject to DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3785, with a response deadline of August 17, 2026, and the primary point of contact is Brandon Wicker. The NSN 9330-00-634-8636 is linked to a government procurement under a federal solicitation, and the offeror must guarantee that all components originate exclusively from qualified sources on the approved QPL.

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3821

The contract solicitation SPE8E5-26-T-3821 is for the procurement of three units of plastic sheet under NSN 9330-01-550-5779 with a delivery requirement of 167 days after award, targeting a delivery date of November 17, 2026, and a need ship date of February 1, 2027. Performance is FOB origin, with delivery to the DDSP NEW CUMBERLAND FACILITY at 2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA 17070-5002. The estimated contract value is approximately $56,969.32 based on available line item pricing, though item descriptions remain unspecified. All supplies must comply with strict packaging standards per MIL-STD-2073-1E and DLA Packaging Requirement RP001, including specific preservation methods, unit container specifications, and palletization protocols. Marking and labeling must conform to MIL-STD-129, mandating uniform barcoding and hazard communication in alignment with OSHA’s Hazard Communication Standard, with exceptions only under specific federal statutes. Mercury or mercury-containing compounds are strictly prohibited unless used in functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof and have a secondary containment barrier per NAVSEA 5100-003D. Hazardous materials require submission of Safety Data Sheets and compliant labeling prior to award, and shipments must adhere to DFARS 252.223-7001 and FAR 52.223-3. Transportation by sea requires the use of U.S.-flag vessels unless a waiver is granted with 45 days’ notice and supporting documentation submitted with each shipment. The contract incorporates numerous FAR and DFARS clauses, including those on combating trafficking in persons, employment eligibility verification, sustainable products, safeguarding covered defense information, cyber incident reporting, prohibited procurement of Chinese military company items, export control, electronic payment submission via Wide Area WorkFlow, and NIST SP 800-171 compliance. Offerors must provide a Unique Entity Identifier and CAGE code, and disclose size status and socioeconomic certifications through SAM. Electronic quotation submission via DIBBS is mandatory by August

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

PLASTIC MATERIAL, CELLU

Solicitation # SPE8E5-26-T-3812

The contract pertains to the procurement of cellular plastic material identified by NSN 9330-01-434-7185 and part number 3522N, with a total quantity of 16 yards to be delivered under purchase request 7017757941. Delivery is required within 167 days from the contract date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Packaging Requirements for Procurement, including MIL-STD-129 for marking and labeling. Packaging standards are governed by ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. If the material is classified as hazardous per Fed-Std-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per SPE8E5-26-T-3812 and ASTM D3951 applies. The unit of issue is yards, and palletization must align with the specified DLA guidelines. The delivery destination is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the required ship date set for February 1, 2027, and the original delivery date February 12, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. All technical and quality requirements reference the DLA Master List, with the applicable revision tied to the solicitation issue date. The solicitation, issued under NAICS code 326113 by the Department of Defense, was posted on August 5, 2026, with responses due by August 17, 2026, and primary point of contact is Don Trachtman.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3790

The contract specifies the procurement of a commercial-grade plastic sheet measuring 48 inches long by 48 inches wide and 0.031 inches thick, with an opaque finish and one side surface-treated for adhesive or ink application. The material must comply with MIL-P-22241B, Type 2, Grade B, and excludes drawing P5029. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. The item is classified as a critical application requiring source inspection. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous material per TQ requirement IP025 or ASTM D3951 for non-hazardous material, with DLA Master List requirements taking precedence. Palletization must follow RP001 packaging standards, and the unit of issue is SH with a fixed quantity of 65 units. Delivery is FOB origin with a 49-day lead time, destination inspection and acceptance, and no variance in quantity permitted. The delivery address is Hill AFB, Utah, with the need ship date set for June 4, 2026, and original delivery due by November 5, 2026. The solicitation number is SPE8E5-26-T-3790, with the NSN 9330-01-141-4491 and part number P5100C-03 supplied by Saint-Gobain Performance Plastics Corp.

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3788

The contract specifies the procurement of 3 shipments of skived plastic sheet with a smooth finish, each measuring 36 inches in length, 36 inches in width, and 0.050 inches in thickness, identified by NSN 9330-00-618-1906 and purchase request 7017758037. The material is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM standards. The product must comply with MIL-STD-130N for identification marking and be packaged according to either FED-STD-313 if hazardous or ASTM D3951 if not, with all packaging labeled in accordance with MIL-STD-129 and palletized per RP001 DLA Packaging Requirements. Delivery is FOB origin with no variance allowed in quantity, and the required delivery date is 167 days from the award, with an original required delivery date of November 23, 2026, and a need ship date of February 1, 2027. Inspection and acceptance occur at the destination, and the sole delivery point is the DLA San Joaquin warehouse in Tracy, California. The solicitation was issued under contract number SPE8E5-26-T-3788, with a response deadline of August 17, 2026, and is governed by DLA procedures for transportation and shipping, including specific directives noted in DLAD Proc Notes C19 and C20.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3783

The contract is for the procurement of a clear acrylic plastic sheet measuring 60 inches in length, 36 inches in width, and 0.188 inches in thickness, identified by NSN 9330-00-483-3266. The item is to be procured as a fully competitive acquisition under a military specification and must comply with MIL-STD-130N for the identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition type. The government requires removal of any government identification from non-accepted supplies. Only one unit is requested under purchase request 7017757094, with a delivery deadline of 167 days after award. The solicitation number is SPE8E5-26-T-3783, posted on August 5, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 326113 and is managed by the Department of Defense through the Warner Robins office, with performance required at Robins AFB, Georgia. Primary point of contact is Khue Nguyen, reachable via email and phone provided.

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3830

The contract pertains to the procurement of 27 units of plastic sheet with NSN 9330-01-496-1954 under solicitation SPE8E5-26-T-3830, issued by the Defense Logistics Agency through the DDP New Cumberland Facility. Delivery is required within 167 days after order, and responses must be submitted by August 17, 2026. The item is subject to strict export control requirements under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons or entities, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and DLA authorization may access this data. Compliance with DFARS 252.225-7048 is mandatory. The contracting officer is Khue Nguyen, and the solicitation is categorized under NAICS code 326113 for plastics manufacturing. The contract also requires the vendor to be a CMMC Level 2 certified third-party assessment organization, and covered defense information applies, meaning the contractor must meet specific cybersecurity standards to handle sensitive data.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3779

The contract specifies the procurement of a red surface, white core plastic sheet measuring 1/16 inch thick, 24 inches wide, and 24 inches long, identified by NSN 9330-00-314-8520 and part numbers 248-221 and EZ-GRAVE#160. The requirement mandates strict adherence to DLA Packaging Requirements for Procurement (RP001) and the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 unless the material is non-hazardous, in which case commercial packaging per ASTM D3951 is acceptable. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 guidelines. The material is subject to inspection and acceptance at the destination, with a fixed quantity of 335 shipping units and zero tolerance for variance in quantity. Delivery is FOB origin with a 167-day lead time, and the required delivery date is December 1, 2026, with a need ship date of February 1, 2027. The plastic sheet must be delivered to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, with transportation protocols governed by DLAD Proc Notes C19 and C20. Hazardous material considerations must follow Fed-Std-313 and TQ requirement IP025 if applicable. The solicitation number is SPE8E5-26-T-3779, issued under NAICS code 326113 by the Defense Logistics Agency District San Joaquin, with a response deadline of August 17, 2026, and primary point of contact Khue Nguyen at khue.nguyen@dla.mil. Unit of issue is SH (shipping unit), and all packaging must reflect the specified QUP of 001. Government identification must be removed from any non-accepted supplies in accordance with RQ011, and covered defense information may apply under RD003.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

PLASTIC MATERIAL, CE

Solicitation # SPE8E9-26-T-3389

The contract pertains to the procurement of cellular plastic material made of polyurethane, specified as light blue, with dimensions of 110 inches in length, 44 inches in width, and 8 inches in thickness. The material is subject to the Qualified Products List (QPL) requirements, indicating it must meet approved military or federal standards for performance and quality. Six units are required under this solicitation, identified by the NSN 9330-01-065-0267 and associated with purchase request number 7017422381. Special storage conditions apply due to the nature of the material, necessitating careful handling and environmental controls to maintain integrity prior to delivery. The solicitation was issued under contract number SPE8E9-26-T-3389, posted on August 5, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 326113 for plastic product manufacturing and is managed by the Department of Defense through the Construction & Equipment MRO Service I organization. The place of performance is Robins Air Force Base, Georgia, with a delivery timeline of 139 days after contract award. Primary point of contact for inquiries is Matthew Kruc, reachable via email and phone provided. The material is intended for federal use and must comply with all applicable DoD specifications and logistics protocols.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE8E5-26-T-3887

The contract requires the procurement of cellular plastic material meeting the latest revision of MIL-PRF-87260, Class 2, Grade II, sourced exclusively from manufacturers listed on the qualified products list QPL-87260. The item, identified by NSN 0001S00000052, has a quantity of 91 units and is subject to a 222-day delivery timeline. The solicitation number is SPE8E5-26-T-3887, with a response deadline of August 17, 2026, and the procurement is managed by the Defense Logistics Agency through the DDSP New Cumberland Facility. The material contains technical data controlled under export regulations, either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and authorized access may handle this data. Additional compliance obligations include CMMC Level 2 certification for third-party assessors and adherence to DLA packaging requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Electronic Invoicing and WAWF Submission ServicesThe contract requires the preparation and timely submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in full compliance with DFARS 252.232-7003, covering both fixed-price and cost-type contract line items. This obligation ensures accurate, secure, and standardized digital documentation aligned with Department of Defense financial and procurement standards. The work is to be performed in Tracy, California, with a zip code of 95304-5000, and falls under a Total Small Business Set-Aside as defined by FAR 19.5, reserving the opportunity exclusively for small businesses certified by the SBA. The NAICS code 541511 indicates this is an information technology services contract, specifically focused on custom computer programming services related to invoice and reporting automation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the DLA San Joaquin office, part of the Department of Defense procurement network.

Custom Computer Programming Services

POSTED

about 21 hours ago

DEADLINE

Specialty Item Supply: Controller, Special (NSN 4510251497100)The contract awards the supply of 28 units of CONTROLLER, SPECIAL with NSN 4510251497100 at a unit price of $28.00, requiring full compliance with packaging, labeling, and delivery specifications to Tracy, CA, with a zip code of 95304-5000. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code is 334511, indicating the industry category tied to the manufacturing of navigational, Measuring, Electromedical, and Control Instruments. The solicitation was posted on August 5, 2026, with all responses due by August 17, 2026, and the awarding agency is DLA DIST SAN JOAQUIN under the Department of Defense, with performance obligations centered exclusively in Tracy, California.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171) Assessment and ImplementationThe contract requires the implementation of NIST SP 800-171 cybersecurity controls to safeguard Controlled Unclassified Information within the covered systems. The contractor must complete a comprehensive self-assessment of compliance with all 110 security requirements outlined in the standard, document findings, and submit the resulting scorecard to the Supplier Performance Risk System. The effort also includes ongoing support for the protection of CUI through technical and procedural measures, ensuring alignment with federal guidelines, as well as readiness to report any cyber incidents in accordance with applicable DoD protocols. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to bid, and the performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 541512 for Computer Systems Design Services.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

Military Packaging and Preservation ServicesThis contract requires the provision of military-compliant packaging, preservation, and marking services for defense-related materiel, strictly adhering to DLA standards and MIL-STD-129 requirements. The work involves the application of VCI corrosion inhibitors, desiccants, hermetic sealing techniques, and barcoding systems to ensure long-term protection, traceability, and compliance with federal military specifications. All packaging processes must be executed in a manner that guarantees the integrity of equipment and supplies during storage and transport under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. Performance will take place at a designated location in Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by the deadline of August 17, 2026, following the release date of August 5, 2026, and will be managed by the DLA San Joaquin office under the Department of Defense. Interested parties must access the solicitation through the official DIBBS portal to ensure full compliance with submission protocols.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Precision Mechanical Component Manufacturing for Manual Control LeverThe contract calls for the manufacture of a precision manual control lever with NSN 5340003440745, a defense-grade mechanical component essential for industrial or military systems. Production must utilize casting or forging processes and require specialized tooling to meet exacting military standards, ensuring reliability and durability under demanding operational conditions. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, and the NAICS code 332999 applies to other fabricated metal product manufacturing. Performance is required at Tracy, California, with a ZIP code of 95304-5000, and all deliverables must comply with defense-related specifications without exception. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, leaving a twelve-day window for qualified small businesses to submit proposals. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and the contract is structured as a subcontract, indicating it supports a larger procurement effort. While no point of contact details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All participants must ensure adherence to quality, timing, and regulatory requirements for defense production, with no allowances for non-compliance or deviations from the specified manufacturing methods.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to an inability to retrieve prime contract details, as system timeouts have prevented access to essential information such as scope, CLINs, agency specifics, and other metadata required for decomposition. The solicitation, posted on August 5, 2026, with a response deadline of August 17, 2026, is categorized as a subcontract under the DLA DIST SAN JOAQUIN agency within the Department of Defense, but no NAICS code, set-aside type, or point of contact is provided. The place of performance is listed as Tracy, California, with a zip code of 95304-5000, though the city, state, and country fields for the office address remain undefined. The contract’s full details are only accessible via the DIBBS system link, but attempts to extract actionable subcontract data have been thwarted by technical limitations.

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the provision of OSHA-compliant hazard communication materials for all hazardous substances contained in delivered items, specifically including Globally Harmonized System labels and Safety Data Sheets that meet federal regulatory standards. These materials must be accurately generated, formatted, and delivered in alignment with OSHA’s Hazard Communication Standard to ensure worker safety and regulatory adherence throughout the supply chain. The work is scoped to support items delivered to the specified place of performance in Tracy, California, with the ZIP code 95304-5000, and must be completed in accordance with all applicable federal safety and documentation protocols. This is a subcontract issued under NAICS code 541690 by the Department of Defense through DLA Dist San Joaquin, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and all submissions must be received by the stated deadline to be considered. While no specific set-aside designation is provided, the contract is explicitly structured as a subcontract, implying it is part of a larger procurement effort. Contractors must be fully versed in GHS labeling requirements and SDS formatting to meet compliance obligations without delay or error, ensuring seamless integration into the recipient’s hazardous materials management system.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Condensing Unit Supply (HVAC Equipment)The contract entails the supply of six commercial off-the-shelf condensing units identified by NSN 4130016572911, intended for use in refrigeration and cooling systems. These units must fully comply with military packaging and marking standards to ensure compatibility with defense logistics and handling protocols. The procurement is classified as a subcontract under the NAICS code 333414, which corresponds to HVAC equipment manufacturing. The offering is managed by DLA Dist San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, at ZIP code 95304-5000. Solicitation for this contract was posted on August 5, 2026, and responses are due by August 17, 2026. All deliveries must meet the specified technical and logistical requirements, including adherence to military specifications for packaging and labeling, to support seamless integration into defense supply chains. The contract is not subject to any set-aside classifications and is accessible through the DIBBS platform for potential vendors seeking to respond.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Logistics Shipment & Labeling ServicesThe contract requires the packaging, marking, and shipment of safety belts in strict accordance with MIL-STD-129 standards and the Defense Logistics Agency’s Vendor Shipment Module requirements. All items must be properly labeled, documented, and prepared for military logistics distribution, ensuring full compliance with federal defense shipment protocols. The work is to be performed at a designated location in Tracy, California, with the zip code 95304-5000 serving as the place of performance. This is a subcontract opportunity under the NAICS code 493190, which categorizes it under other warehousing and storage services, and is managed by the DLA Dist San Joaquin office under the Department of Defense. Bidders must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or certification status. Participation requires familiarity with DLA’s electronic vendor systems and adherence to stringent military packaging and identification guidelines. The contract is accessible via the DIBBS portal using the reference number SPE8E626T4031, and successful performers will support the defense supply chain by ensuring timely and accurate delivery of critical safety equipment to military endpoints.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation of Safety Data Sheets and hazard warning labels for hazardous materials used in the manufacturing or packaging of safety belts, ensuring full compliance with OSHA and Department of Defense regulations. All deliverables must meet federal standards for hazard communication, accuracy, and readability, with strict adherence to mandated content, format, and language requirements. The work is tied to operations in Tracy, California, with the place of performance specified at ZIP code 95304-5000, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting activity managed by DLA Dist San Joaquin under the Department of Defense. While no set-aside type or specific point of contact is indicated, contractors must be prepared to demonstrate capability in handling classified or sensitive defense-related materials and producing compliant documentation under tight deadlines. All submissions must align with the DIBBS system referenced in the UI link, and successful offerors will be expected to support ongoing defense manufacturing efforts with reliable, audit-ready safety documentation.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE