This Solicitation opportunity from Government of Canada was posted on April 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Regional Elevator Maintenance

Closed

21807-26-0028AInternational

Submission Closed04/27/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 561790

New

International

Fire Extinguisher Preventive and Corrective MaintenanceThis subcontract involves providing comprehensive preventive and corrective maintenance for fire extinguishers at UNHCR facility projects located in Chad. The selected contractor is responsible for performing annual regulatory verifications, periodic inspections, and pressure testing using a certified test bench. Additionally, the contractor must provide urgent repair services with a guaranteed response time of 72 hours, apply tracking tags to all equipment, and generate detailed electronic inventory reports to ensure operational readiness. To qualify for this engagement, the contractor must maintain a dedicated workshop equipped with pressure control tools and employ at least two certified fire safety technicians. The primary objective of the contract is the delivery of fully certified and operational fire extinguishers to maintain safety standards across the designated facilities.

POSTED

DEADLINE

Manual Snow Shoveling and Roof MaintenanceThis subcontract for Manual Snow Shoveling and Roof Maintenance involves providing manual snow and ice removal services for prime contractors at California Highway Patrol facility projects. The scope of work includes shoveling steps, landings, porches, door accesses, fire hydrants, and AC condenser motors, as well as removing cornices and clearing roof vents to ensure snow accumulation remains under three inches. The primary objectives are to deliver clear pedestrian paths and maintain safe roof loads. Contractors are required to utilize industrial shovels, roof scrapers, and safety harnesses while adhering to CA Electric Safety Orders. This opportunity is categorized under NAICS code 561790 and was posted on November 6, 2026, with a response deadline of December 1, 2026.

Department of the California Highway Patrol

POSTED

DEADLINE

Heavy Equipment Snow Plowing and RemovalThis subcontract for Heavy Equipment Snow Plowing and Removal involves providing motorized snow removal services for prime contractors at California Highway Patrol facilities in Mount Shasta. The scope of work includes plowing and clearing parking stalls, ADA ramps, concrete islands, and motorized gate entrances to ensure all parking lots and access points remain snow-free. To qualify, contractors must utilize a snow blower and a 4WD Loader with a minimum of 150 hp and a 3-yard bucket. All operations must strictly adhere to the California Department of Industrial Relations Division of Industrial Safety regulations. The solicitation was posted on November 6, 2026, with a response deadline of December 1, 2026.

Department of the California Highway Patrol

POSTED

DEADLINE

IFB #26C146002 - REBID

Solicitation # 26C146002

The Department of the California Highway Patrol is soliciting bids for snow and ice removal services at the Mount Shasta Area Office under IFB 26C146002. The contract, budgeted at 121,598.00 dollars, is anticipated to run from January 1, 2027, through December 31, 2029. The scope of work requires the contractor to provide all labor, equipment, and materials for plowing, shoveling, de-icing, and sidewalk clearing. Key performance standards include maintaining clear paths of travel during business hours, ensuring roof snow accumulation does not exceed three inches, and responding to service requests within two hours. Minimum equipment requirements include a 150 hp 4WD loader with at least a three-yard bucket capacity. Award is based on the low bid method, with the net bid price serving as the primary evaluation factor. While the Disabled Veteran Business Enterprise participation requirement is waived, incentives are available for DVBE, Small Business, and Nonprofit Veteran Service Agency participation, with a cumulative adjustment limit of 10 percent or 100,000 dollars. Bidders must submit one original physical bid package via mail or hand delivery by December 1, 2026, ensuring all required certifications and declarations are signed in ink. The contractor must comply with prevailing wage rates, ADA regulations, and security clearance requirements, and must provide proof of liability insurance prior to execution.

Department of the California Highway Patrol

POSTED

DEADLINE

Ice Control & Salt ApplicationThis subcontract for Ice Control and Salt Application involves providing and applying salt or ice-melting agents for prime contractors managing facility projects within Iredell County, North Carolina. The selected provider is responsible for salt preparation, the application of chemical de-icers using salt spreaders, and the removal of ice and slush across designated site groups to maintain operational continuity. All work must be performed in strict compliance with local, state, and federal regulations to ensure surfaces are left clear of ice and slush. The opportunity is managed by the Facility Services Director under NAICS code 561790. Interested parties must submit their responses by the deadline of November 20, 2026. This contract focuses on essential winter maintenance services to ensure the safety and accessibility of county facilities.

Facility Services Director

POSTED

DEADLINE

Sidewalk and Walkway ClearingThis subcontract for Sidewalk and Walkway Clearing involves providing manual or mechanical snow and debris removal for pedestrian pathways at Iredell County facility projects. The selected contractor will be responsible for clearing sidewalks, handrails, and walkways leading to buildings using equipment such as snow blowers, shovels, or specialized plows to ensure safe passage. A critical requirement of the contract is that all clearing activities must be completed by 7:45 A.M. on business days. This opportunity is managed by the Facility Services Director in North Carolina, with a response deadline set for November 20, 2026.

Facility Services Director

POSTED

DEADLINE

Heavy Snow Plowing Services (Parking Lots & Entrances)This subcontract for Heavy Snow Plowing Services involves providing large-scale snow removal for prime contractors at Iredell County facility projects. The scope of work requires clearing parking lots, exits, and entrance ways for snow accumulations between 2 and 8 inches, with all snow piled in designated drainage areas. To ensure operational readiness, all surfaces must be cleared by 7:45 A.M. using trucks and tractors. Qualified providers must employ personnel trained in ice management and maintain General Liability insurance of at least 2 million dollars. The primary objective is the delivery of clear and safe parking lots and access points. Interested parties should note the response deadline of November 20, 2026.

Facility Services Director

POSTED

DEADLINE

Building Repairs at San Antonio State Supported Living Center (SASSLC)

Solicitation # HHS0018173

Texas Health and Human Services Commission is soliciting competitive bids under IFB No. HHS0018173 for building repairs at the San Antonio State Supported Living Center (SASSLC) located in San Antonio, Texas. The scope of work involves repairs across 11 specific locations, including various buildings and the Development Center, with a focus on repairing attic access panels with closing latches and sealing holes and cracks using Hilti firestop sealant and 5/8 inch sheetrock. A mandatory on-site visit was scheduled for November 11, 2026, and the final deadline for response submission is December 1, 2026, at 10:30 AM. The anticipated contract start date is upon award. Award decisions will be based on the best value to the State, evaluating requirements and specifications, performance delivery, and price. Bidders must provide firm, fixed pricing via the designated pricing sheet and meet strict personnel qualifications, including at least two years of relevant experience and mandatory background checks. The selected contractor must respond to service calls within four hours and perform work Monday through Friday, 8 a.m. to 5 p.m. Central Time. Required insurance includes Workers Compensation, Commercial General Liability with a 2 million dollar general aggregate, and Employer Liability. Payments will be made monthly in accordance with the Texas Prompt Payment Act, requiring a valid Texas Identification Number.

Health and Human Services Commission

POSTED

DEADLINE

Licensed Pesticide and Fertilizer ApplicationThis subcontract for the City of Greensboro involves the professional application of chemicals and nutrients to golf course turf. The selected contractor will be responsible for applying fertilizers, herbicides, insecticides, and fungicides using commercial-grade spreaders and sprayers, ensuring all work adheres to labeled rates and specific timings. Key deliverables include the successful execution of these applications and the provision of detailed regulatory logs. To qualify for this role, the contractor must hold a North Carolina Commercial Group Applicator License in Category L. Additionally, the provider is required to maintain strict product inventories and application records in accordance with state regulations. The solicitation was posted on November 6, 2026, with a response deadline of December 1, 2026.

POSTED

DEADLINE

Graffiti Removal and Inspection Services at Various Regional Bridge Locations

Solicitation # RFT-3814-26

The Regional Municipality of York is seeking bids for graffiti removal and inspection services at various bridge locations under solicitation RFT-3814-26. All submissions must be made electronically through the Region's Bids and Tenders website, as hard copy submissions will not be accepted. The deadline for receipt of bids is December 3, 2026, at 1:00:00 p.m. Eastern Standard Time. A mandatory deposit of 10,000.00 dollars via Electronic Funds Transfer or Wire Transfer must accompany all bids. Additionally, bidders must disclose whether they are submitting as part of a joint venture or consortium. All inquiries regarding this tender should be directed through the bidding website's question submission feature.

POSTED

DEADLINE

Diesel Fuel Testing and ReconditioningThis subcontract for Diesel Fuel Testing and Reconditioning involves providing fuel quality maintenance for diesel-fueled generator units at Texas Department of Public Safety facility projects. The selected contractor will be responsible for performing fuel polishing, testing, reconditioning, and water removal from fuel tanks utilizing mobile filtration units. Key deliverables include the submission of fuel test results and comprehensive polishing completion reports. Compliance with OSHA and Texas hazardous materials standards is mandatory for all work performed. Additionally, personnel must undergo fingerprint-based background checks to meet security requirements. This opportunity is categorized under NAICS code 561790, with a response deadline of November 20, 2026.

Department of Public Safety

POSTED

DEADLINE

Lead-Based Paint Abatement and Surface PreparationThis subcontract for Lead-Based Paint Abatement and Surface Preparation involves the removal and preparation of lead-contaminated exterior wood surfaces for facility projects at the University of Maryland, College Park. The scope of work includes using wet scraping methods to remove loose, flaking, and peeling paint, as well as the removal of asbestos-containing chalk and loose glazing compound to deliver lead-free surfaces. The contractor must hold a valid contractor license and ensure all work strictly complies with EPA Title 40 CFR Part 745 and MDE COMAR regulations 26.02.07.12 and 26.16.01.11-12. This opportunity falls under NAICS code 561790, with a response deadline set for November 18, 2026.

POSTED

3 days ago

DEADLINE

in 10 days

AI Contract Overview

The Correctional Service of Canada is seeking a qualified contractor to provide comprehensive maintenance, inspection, testing, and emergency response services for all elevators, dumbwaiters, and handicap lifts across its Pacific Region correctional institutions in British Columbia, specifically in the Fraser Valley and Victoria areas. The contract, covering a five-year term from May 1, 2026, to March 31, 2031, requires full compliance with the Safety Standards Act - Elevating Devices Safety Regulation of British Columbia, ASME A17.1-2016/CSA B44-16, and CSA B355-09, with mandatory adherence to any future updates to these standards adopted by Technical Safety BC during the contract period. The contractor must perform scheduled monthly and quarterly maintenance, annual Category 1, triennial Category 3, and quinquennial Category 5 testing, ensuring each unit receives at least one Category 5 test during the contract term. All labor, minor and major parts, consumables, tools, and software updates necessary for repairs must be provided by the contractor, excluding items such as intercom systems, obsolescence-driven upgrades, vandalism or fire damage repairs, shaft work, and proprietary software updates beyond the contractor’s control. Emergency response for entrapments is required within three hours, 24/7, while non-emergency repairs must be addressed within 48 hours on weekdays. The contractor must maintain complete on-site maintenance records for each unit in accordance with ASME/CSA standards and dispose of all waste materials, including hydraulic fluids and used parts, in compliance with environmental regulations at their own cost. All personnel must be escorted by Correctional Service Canada staff at all times while on site, with vehicle access subject to 40 minutes of security screening each entry and exit. Only bidders holding a current Class A Contractor’s License and certified Class A Elevating Device Mechanics in British Columbia are eligible, with award based solely on the lowest priced technically acceptable bid. The contract is open exclusively to Canadian suppliers under multiple trade agreements including CETA, CPTPP, and CFTA, with no set-asides for Indigenous businesses. The contractor must operate in English, secure all required permits, and comply with federal, provincial, and municipal regulations, including WHMIS 2015, tuberculosis testing requirements, anti-forced labor disclosure, and privacy obligations. Submission is electronic only in three clearly separated PDF files—technical bid, financial bid, and certifications

General Info

Provide inspection, maintenance, and emergency repair for elevators in BC correctional facilities, May 2026-2031.

Agency

Government of Canada → Correctional Service of Canada

NAICS

561790 - Other Services to Buildings and Dwellings

Place of Performance

*British Columbia *Abbotsford *Chilliwack, CAN

Set-Aside

other

Documents

rfp

High

rfp

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedApr 10

Solicitation

Notice updatedApr 27

Response deadline time changed from 10:00 PM UTC to 5:00 PM UTC on Apr 27, 2026. The notice description changed. The point of contact changed.

Response DeadlineApr 27

Deadline has passed

Submission Closed

04/27/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Correctional Service of Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Correctional Service of Canada

Office AddressN/A

Contacts

Katie McKeeverPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Regional Elevator Maintenance This requirement is for: The Correctional Service of Canada. Trade agreement: Canadian Free Trade Agreement (CFTA), World Trade Organisation-Agreement on Government Procurement (WTO-AGP), Canada Ukraine Free-Trade Agreement (CUFTA), Canada Korea Trade Agreement (CKTA), Canada free trade agreements with Chile/Colombia/Honduras/Panama, Canada-Peru Free Trade Agreement, Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and Canada-United Kingdom Trade Continuity Agreement (Canada-UK TCA), Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) Policy on Reciprocal Procurement: This solicitation is open only to Canadian suppliers. Competitive Procurement Strategy: Lowest priced compliant bid. Set-aside under the Procurement Strategy for Indigenous Business: This procurement is not subject to any set-asides for Indigenous Suppliers. Comprehensive Land Claim Agreement: This procurement is not subject to a Comprehensive Land Claims Agreement. Security Requirements: This contract does not include security requirements. Nature of Requirements: The Correctional Service Canada has a requirement to inspect, test, and perform preventative maintenance services to all elevators, dumbwaiters, and handicap lifts within the Correctional Institutions of the Pacific Region in the Fraser Valley and Victoria BC. The work shall involve the following: 1.1 Background: The Canada Occupational Health and Safety Regulations part IV Elevating devices require that every elevating device and every safety device attached thereto shall be maintained by elevator personnel in accordance with the applicable Canadian Standards Association (CSA) standards for elevating devices. The Correctional Service does not have qualified in house human resources capacity to meet this requirement and therefore must hire a qualified service contractor to provide these maintenance services for each unit at each institution. 1.2 Objectives: To provide for full coverage maintenance services of all elevating units listed in the Correctional Service Canada Pacific Regional elevating units inventory titled Annex B. 1.3 Tasks: 1.3.1 The Contractor must perform all mandatory monthly and quarterly maintenance service visits as per the applicable regulations listed in paragraph 1.3.6 of this statement of work. 1.3.2 The Contractor must provide all labour, electrical and mechanical parts (minor and major), consumables, tools and software updates to perform all repairs to all elevating units listed in the regional elevating units inventory titled Annex B. 1.3.2.1 Parts, materials and services that must be excluded from the contract are described in paragraph 1.3.8 of this statement of work. 1.3.2.2 Definition of major and minor parts for the purpose of this contract are described in section 1.4 of this statement of work. 1.3.3 The Contractor must perform all applicable periodic Category 1, Category 3 and Category 5 mandatory testing as required by the Safety Standards Act- Elevating Devices Safety Regulation of B.C. a/ Category 1 tests where applicable shall be performed annually. b/ Category 3 tests where applicable shall be performed every 3 years c/ Category 5 tests where applicable shall be performed every 5 years d/ Note: Each elevating unit listed in the regional inventory titled Annex B, shall receive all applicable Category 5 tests once during the length of the contract term. e/ A record of all periodic tests shall be kept as part of the maintenance control program record for each elevating unit. 1.3.4 The Contractor must provide for emergency call-back service for entrapment when requested by an institution contact. The Contractor’s response time shall be within three (3) hours, 24 hours a day, seven days a week from the time the Contractor has been notified by an institutional contact. 1.3.5 The Contractor must provide for regular-time call-back service for repair (when a unit is deemed inoperable at any one institution) when requested by an institution contact. The Contractor’s response time shall be within 48 hours, Monday to Friday once the Contractor has been notified by an institutional contact. 1.3.6 All work must be conducted in accordance with: - the Safety Standards Act - Elevating Devices Safety Regulation of B.C. - ASME A17.1- 2016/CSA B44-16 – Safety Code for Elevators and Escalators and Moving walks. - CSA standard B355-09 – Lifts for persons with physical disabilities. - all applicable Technical Safety B.C directives. - the original manufacturer’s recommendations. 1.3.7 The full coverage contract shall include all tasks as so described in paragraphs 1.3.1 through 1.3.6 in this statement of work. 1.3.8 Excluded from the contract are: - any accessory equipment unrelated to normal elevator operation. - any repairs (labour, parts and materials) due to negligent operation, misuse or vandalism of equipment by others. - obsolescence driven upgrades. - intercom/phone systems. - damage from vandalism, fire or flooding. - fire detectors. - repairs (labour, parts and materials) to the elevator shaft. - software updates when unavailable to the Contractor due to proprietary restrictions. 1.3.9 Note: At the time of tendering of this service contract, the edition years of 2016 and 2009 are the current edition years adopted by Technical Safety B.C. for elevator safety standards ASME A17.1-2016/CSA B44-16 and CSA B355-09. Should the Ministry of Housing of B.C. direct that a newer edition of either of these elevator safety standards (or both) shall be adopted in the province of British Columbia for the year 2026, or at any time in the future during the length of the contract term, the Contractor shall be obligated to service and maintain all elevating units covered under this maintenance service contract with the Correctional Service of Canada in accordance with the newer editions of these elevator safety standards. Should these newer editions lead to any additional mandatory Category 1, 3 and 5 tests that are not currently enforced under the current editions of standard ASME A17.1- 2016/CSA B44-2016 and CSA standard B355-2009, these tests would not be included in this contract and shall be brought to the attention of each institution contact for approval prior to fulfilling. 1.4 Definition of major and minor parts for the purpose of this contract only: 1.4.1 Major Parts must be defined as elevating unit parts that are long life components, expensive to purchase and install but are expected to be infrequently in need of replacement especially on low use elevating units as per industry norms. Examples of Major parts: - Motors- pump/generator/hoist machine - Jack packing - Traveling cables - Door operator - Hoist ropes and sheaves - PC control boards - Hydraulic piston (jack) - Hydraulic pump and valves - Selector 1.4.2 Minor Parts must be defined as elevating unit parts that are expected to wear out through normal use, typically replaced during regular frequency maintenance service visits and are generally inexpensive to purchase and install as per industry norms. Examples of Minor parts: - Fuses, contacts and relays - Door rollers, gibs and guides - Switches, buttons and indicator bulbs - Chains and belts - Small fasteners - Brake parts 1.5 Deliverables: 1.5.1 The Contractor must perform all tasks as so described in paragraphs 1.3.1 through 1.3.6 in this statement of work as per the applicable regulations, standards, directives and codes. 1.5.2 The Contractor must maintain on-site maintenance records in the machine rooms for each elevating unit of all maintenance service visits, inspections, periodic tests and repairs/call backs along with each elevating unit’s specific MCP (Maintenance Control Program) as per 8.6.1.2.2 thru 8.6.1.4.1 of ASME A17.1-2016/CSA B44-16 for the duration of the contract. 1.5.3 The Contractor must perform all work during regular time working hours Monday to Friday 8am to 4pm (excluding legal holidays) except for emergency call-back service for entrapment as defined in task 1.3.4 of this statement of work. 1.5.4 The Contractor must comply with all federal, provincial and municipal regulations applicable tothe performance of the work and obtain all permits and hold all certificates and licences required for the execution of the work through the length of the contract term. 1.5.5 The Contractor must remove from the premises any waste products or rubbish resulting from the work and shall recycle or dispose of in accordance with all municipal, provincial and federal regulations and bylaws. All costs associated with the recycling and/or disposal of all waste products such as hydraulic oil, brake pads, cables, electronic components, used parts etc. are to be included in the contract. 1.6 Client Support: 1.6.1 For safety and security, the contractor will be escorted by a CSC staff member at all times while inside each institution. If it is deemed necessary by the Contractor to bring their service vehicle into the institution to conduct a service visit, the Contractor shall allow approximately 20 minutes to sign in and have the vehicle inspected by security and another 20 minutes for the same procedures upon exiting the institution. Inspection times can be longer without any prior notice. 1.7 Location of work: The Contractor must perform the work at the institutions as listed in Annex C. 1.8 Language of Work: The contractor must perform all work in English. Any conditions for participation of suppliers not specified in solicitation documentation: none. Estimated quantity of commodity: see solicitation document statement of work and basis of payment. Duration of Contract and Time Frame for Delivery: Period of the Contract: The Work is to be performed during the period of May 1, 2026 to March 31, 2031. File Number: 21807-26-0028A Contracting Authority: Katie McKeever Telephone number: +1 (555) 000-0000 E-mail: contact@example.gov NOTE TO BIDDERS: Bidders can obtain the complete statement of work and evaluation criteria by downloading the solicitation document and associated documents from the website. The Crown reserves the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada (English or French). After contract award, bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within fifteen (15) working days of receipt of the results of the bid solicitation process. The debriefing may be in writing, by telephone or in person. Procurement Assistance Canada (PAC) offers seminars to businesses interested in learning how to sell goods and services to the Government of Canada. The seminars are FREE. Topics include: ? Understand the federal procurement process; ? Learn about searching for opportunities; ? Find out how to bid on opportunities; ? Discover how to prepare to sell to the government. The full schedule of seminars can be found on the Procurement Assistance Canada website, under find an event (Procurement Assistance Canada: Find an event - Canada.ca).