Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Relay Basler Retrofit Kit

Active

Z4877State & Local

Response Deadline07/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a Basler Retrofit Kit designed to replace existing ABB CO time overcurrent relays with a single-phase, case-less relay that fits inside the original ABB CO relay housing. The approved part number for this retrofit solution is BASLERBE1-50/51B-219, ensuring compatibility with legacy ABB equipment without requiring a full housing replacement. The upgrade aims to modernize protected systems while maintaining structural and spatial integrity within existing installations. The solicitation, numbered Z4877, was posted by Nashville Electric Service in Tennessee with a response deadline of July 31, 2026. It is categorized as a SLED procurement and includes a primary point of contact, Bailey Allen, reachable via email and phone for inquiries. The place of performance is in Nashville, Tennessee, and interested parties can access more information through the provided vendor portal link. No set-aside type or NAICS code is specified, indicating an open competition for qualified suppliers.

General Info

Basler Retrofit Kit replaces ABB CO relays in Nashville, Tennessee, with approved part BASLERBE1-50/51B-219.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4877_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 28

Solicitation

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Bailey AllenProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

RELAY BASLER RETROFIT KIT FOR "CO" RELAY RETROFIT KIT, FOR ABB "CO" TIME OVERCURRENT RELAYS, SINGLE PHASE. THE KIT IS A REPLACEMENT RELAY WITHOUT A CASE THAT FITS INSIDE AN EXISTING ABB TYPE "CO" RELAY CASE. Approved Manufacturers and/or Part Numbers: BASLERBE1-50/51B-219

Similar Contracts

Same NAICS industry code

Relay-Switch Manufacturer / SupplierThe contract seeks a small business manufacturer or supplier to produce and deliver 57 relay-switch units identified by NSN 5999-01-494-0638, with full compliance to applicable military specifications and configuration control standards. The requirement is structured as a subcontract under a Total Small Business Set-Aside, ensuring exclusivity for small businesses as defined by the SBA, and is classified under NAICS code 335314 for electrical equipment manufacturing. Performance of the work is designated for Tracy, California, with a zip code of 95304-5000, and all deliverables must meet exacting defense-grade quality and documentation controls. The solicitation was posted on July 28, 2026, with responses due by August 12, 2026, and the contracting activity falls under the Department of Defense’s Active Devices Division, indicating the critical nature of these components for military systems.

ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

SWITCH, ROTARYThe contract is for the procurement of 36 rotary switches with NSN/Part Number 5930-00-832-5174 under solicitation SPE7M2-26-Q-0683, issued by the Department of Defense's Nuclear Reactor Program through the Defense Logistics Agency. Delivery is required within 150 days after award, and responses to the solicitation must be submitted by August 3, 2026. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applying equally to U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by DLA. DFARS 252.225-7048 governs the protection and distribution of this information, and distribution is limited to DLA contractors who meet all prescribed requirements. The primary point of contact for the solicitation is Vlada Artyemova, reachable via email and phone provided.

NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

RELAY ASSEMBLYThe contract pertains to the procurement of a single relay assembly identified by NSN 5945-01-358-6476, with a requirement for delivery within 20 days after order issuance. The solicitation, numbered SPE7M5-26-T-356F, was posted on July 28, 2026, with responses due by August 10, 2026, and is administered by the Department of Defense’s Active Devices Division under NAICS code 335314. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates compliance with packaging standards and physical identification requirements, including the removal of government identification from non-accepted supplies and proper bare item marking. The alternate offeror must submit a complete data package containing full technical documentation for both the approved part and any alternate part. The place of performance is Pearl Harbor, Hawaii, with Jeanette Heisey listed as the primary point of contact for inquiries.

ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

PARTS KIT, CONTROLLEThe contract pertains to a Parts Kit, Controller with NSN 6110-01-564-6930 and a quantity of 1,000 units, issued under solicitation SPE7M1-26-T-235L by the Department of Defense through the Maritime Supply Chain agency. The requirement mandates strict adherence to DLA Packaging Requirements for Procurement and incorporation of technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended, in which case the amendment date governs. The contractor must also comply with the requirement to remove government identification from non-accepted supplies and submit a complete data package covering both the approved and alternative parts. Delivery is due within 20 days after award, with performance designated at San Diego, CA, 92136. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and falls under NAICS code 335314 for electrical equipment manufacturing. Primary point of contact is Michael Reese, reachable via email and phone provided, with the official solicitation available through the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SOLENOID, ELECTRICALThis contract is for the procurement of a solenoid, electrical, identified by NSN 5945150359789 and part number 5803521775 from IVECO DEFENCE VEHICLES S.P.A., with a total quantity of nine units to be delivered FOB origin within 237 days of award, with no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific preservation methods, container codes, and marking standards. Each unit package must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content and other component attributes, with marking placement following the standard’s guidelines. Marking of shipments must follow MIL-STD-129, and palletization must meet DLA specifications. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with a mandatory ship date of April 5, 2027. Transportation and freight procedures are governed by DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-887S, with a response deadline of August 10, 2026, and is classified under NAICS code 335314. Point of contact is Katherine Woods at the Department of Defense, Land Supply Chain, with official documentation accessible through the DIBBS platform.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

RELAY, ELECTROMAGNETThe contract is for the procurement of 14 electromechanical relays with NSN 5945-01-299-3606 under solicitation SPE7M1-26-T-235U, issued as a total small business set-aside with NAICS code 335314. The requirement is governed by DLA packaging standards and technical quality criteria referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware unless specifically exempted for functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary as defined in NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies prior to disposition. The delivery schedule requires fulfillment within 125 days after order, with responses due by August 10, 2026, and performance must occur at New Cumberland, Pennsylvania, 17070-5002. Points of contact for procurement inquiries include Corin Loper, with direct email and phone provided through the DLA portal.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SOLENOID, ELECTRICALThis contract is for the procurement of a solenoid, electrical, identified by NSN 5945-15-035-9790 and part number 5803521774, with a quantity of nine units to be delivered FOB origin within 237 days from the required delivery date of April 5, 2027. The contract specifies strict compliance with DLA packaging standards, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, and requires unit packaging to conform to IPC/JEDEC J-STD-609 for lead-free and component marking, with placement per the standard’s guidelines. Total price is $9.00 per unit, with no quantity variance allowed, and inspection and acceptance occur at destination. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List and is subject to special marking codes and packaging protocols, including palletization per RP001 and use of prescribed packaging methods, materials, and container codes. The item is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes. The solicitation number is SPE7L1-26-T-888E, issued by the Department of Defense’s Land Supply Chain, with Katherine Woods as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SWITCH, PUSHThe contract pertains to the procurement of 54 units of a push switch identified by NSN 5930-01-564-0464 and part number XB4-BW34B5 from SCHNEIDER ELECTRIC USA, INC. Delivery is required within 147 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance both occur at the destination warehouse located at 25600 S CHRISMAN ROAD, TRACY CA 95304-5000. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods designated as Method 41, dry storage, and no cushioning material. Marking must adhere to MIL-STD-129 with no special marking required. Palletization must follow DLA packaging requirements, and the unit of issue is each. The item is not classified as hazardous material, and the delivery is directed to the DLA Distribution San Joaquin receiving warehouse. The original required delivery date is September 23, 2026, with a need ship date of January 5, 2027. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation and award dates. The solicitation number is SPE7M8-26-T-5632, posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 335314 for electrical equipment manufacturing, and the contracting office is the Department of Defense’s Electrical Devices Division.

ELECTRICAL DEVICES DIV

POSTED

about 19 hours ago

DEADLINE

RELAY, SOLID STATEThis contract specifies the procurement of 42 solid state relays with the NSN 5945-01-737-0977 and part number GPRM-S1C12D-3, under solicitation SPE7M3-26-T-7734, with a total price of $1,764.00 at $42.00 per unit. Delivery is required FOB origin within 207 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, including specific lead finish identification per IPC/JEDEC J-STD-609 on each unit package, with placement governed by the standard’s specifications. Technical and quality requirements are governed by the DLA Master List referenced in the document, with applicable revisions controlled by the solicitation or award date based on acquisition size. Palletization must adhere to DLA packaging standards, and all shipments must be directed to the designated receiving warehouse in Tracy, CA. The need ship date and original delivery date are both set for March 6, 2027. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the point of contact for inquiries is Braxton Snyder, with email and phone provided for direct communication.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

RELAY-SWITCHThe contract solicits 57 relay-switch units under NSN 5999-01-494-0638 with a firm fixed price and no variance allowed in quantity, requiring delivery within 149 days after order award. The item must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the specified source-controlled drawing mandating conformance to BAE Systems Land & Armaments L.P. P/N 4254520 or Sechan Electronics Inc. P/N 80212-4254520 as listed, with no substitution permitted unless officially approved. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking codes, and palletization follows DLA packaging requirements. All supplies are subject to inspection and acceptance at the destination point, with FOB origin terms applying. The item is classified under NAICS 335314 and awarded under a Total Small Business Set-Aside, requiring compliance with all applicable defense procurement regulations including configuration change management, removal of government identifiers from non-accepted items, and physical identification standards. Hazardous materials handling and shipping logistics follow referenced DLA procedural notes, with delivery directed to DLA Distribution San Joaquin in Tracy, California. The contract was posted on July 28, 2026, with a bid submission deadline of August 12, 2026, and the government’s material need date is May 27, 2027.

ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

RELAY, ELECTROMAGNETThe contract is for the procurement of 13 electromechanical relays with NSN 5945-01-252-1359 under solicitation SPE7M0-26-T-022P, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days after award, and responses must be submitted by August 10, 2026, with the solicitation posted on July 28, 2026. The product falls under NAICS code 335314 and is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. These requirements are incorporated by reference and identified by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Government identification must be removed from non-accepted supplies, and alternate offerors must provide complete data packages for both the primary and alternate parts. The point of contact is Laurie Wassmuth, reachable via email and phone, with performance taking place at FPO, ZIP 96660.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

Sources Sought SEL-2488The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a satellite-synchronized network clock capable of meeting the performance requirements currently fulfilled by the SEL-2488 transformer protection relay from Schweitzer Engineering Laboratories. The device must provide accurate, traceable time synchronization for protective relays, automation controllers, meters, SCADA systems, and other intelligent electronic devices across the Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam under Fiscal Year 2027 SIOP Project P-8026. Key capabilities include distribution of precise time via industry-standard protocols such as PTP, NTP, IRIG-B, and PPS; continuous monitoring of synchronization status, clock health, and communication integrity; generation of alarms for timing faults or losses; and comprehensive event logging and remote monitoring functionality. The system must integrate seamlessly with existing substation automation and communication networks through Ethernet and standard protocols to ensure reliable, centralized time management. This notice is a market research action, not a solicitation for bids or proposals, and responses are requested solely to determine whether other manufacturers can offer technically equivalent solutions. Submissions must include complete technical data, specifically excluding company brochures, and must be emailed to Annette Tijerina no later than July 31, 2026, at 2:00 p.m. H.S.T. Any information submitted becomes the property of the U.S. Government and will not be returned; all proprietary or classified data will be handled under appropriate safeguards. Responses that are incomplete, vague, or received after the deadline will not be considered. Participation in this request does not constitute an offer or create any binding contractual obligation, and respondents bear full responsibility for the accuracy and completeness of the information provided. The North American Industry Classification System code for this effort is 335314.

Navfacsyscom Pacific

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Fuse NX SandThe contract is for the procurement of Fuse NX Sand, a 10-ampere continuous, C-rated, full-range cannister mount fuse rated for 15.5 kilovolts with a 50,000 symmetrical ampere interrupting capacity. Approved manufacturers and part numbers include ABBAUTO151D883G11, COOPERFA4H10CODE5, and GENELEC9F59KBD010, ensuring compliance with specified technical requirements. The solicitation is issued by Nashville Electric Service under solicitation number Z4878, targeting state, local, and educational agencies. Responses are due by July 31, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. The place of performance is Nashville, Tennessee, and all deliveries must meet agency specifications for reliability and safety in utility applications. Primary point of contact for procurement inquiries is Bailey Allen, who can be reached at ballen1@nespower.com or by phone at 615-747-3724. The solicitation is accessible online via the vendor portal at https://vendor.nespower.com/?bid=Z4878. Interested vendors must submit bids in accordance with the posted deadline and technical criteria, as failure to comply with approved manufacturer part numbers or performance ratings may result in disqualification. No set-aside provisions are specified, and the contract is not restricted to small business or socioeconomic categories.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

AWG 19 Strand Aluminum ConductorThe contract specifies the procurement of a specialized cable with a 19-strand aluminum conductor, 11 number 14 AWG round copper concentrics in a one-third configuration, and a minimum 45 mils point polyethylene jacket featuring red stripes, all manufactured in compliance with the latest edition of the NES EC-276 specification. Each cable unit must be supplied in three 1,000-foot lengths per reel, totaling 1,000 circuit feet per reel, with all reels required to be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. The reels must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with an inside diameter of at least 2.75 inches, while overall reel dimensions cannot exceed 43 inches in width or 72 inches in height, and the maximum cable diameter must not surpass 1.47 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are eligible to supply this cable. This solicitation is issued by Nashville Electric Service under solicitation number Z4870, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The procurement is categorized under a state and local government entity in Tennessee, and the performance location is Nashville. Potential vendors must submit bids through the official portal linked in the solicitation data, and all inquiries should be directed to Jay Thompson, the primary procurement contact, via email at jethompson@nespower.com. The contract is open for bidding without specific set-aside classifications, and compliance with all technical, labeling, and shipping requirements is mandatory for proposal acceptance.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Cable CopperThe contract specifies the procurement of stranded compressed copper conductor cable with a 5 mil helically applied copper tape and a minimum 70 mils point polyvinyl chloride jacket, manufactured in compliance with the latest edition of NES Specification EC-562. Three separate lengths of 2,300 circuit feet each must be provided, twisted on individual reels to meet the total length requirement. All reels must be constructed of steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 84 inches in height. The maximum cable diameter is capped at 0.94 inches, and each reel must be clearly stamped with the tare weight, net weight, and gross weight. The cable must be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. Approved manufacturers for this specification include KERITE, PRYSMIAN, and OKONITE, with the part number KERITE302C15-A4420 explicitly listed. The solicitation, titled Cable Copper under number Z4876, is issued by Nashville Electric Service in Tennessee with a response deadline of August 5, 2026 at 7:00 PM. The point of contact for procurement inquiries is Jay Thompson, reachable via email at jethompson@nespower.com. The contract is targeted for performance in Nashville, Tennessee, and is accessible through the agency’s vendor portal at the provided UI link.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Meter SealThe contract is for the procurement of SEAL PLASTIC ORANGE METER SEALS featuring an acrylic body with an orange insert, a regular padlock design, and a stainless steel hasp, each marked with NES. The seals are to be supplied loosely packed in boxes of 100 units. Approved manufacturers and part numbers include STARPOLYSPUNI2, INNER-TC-2070, and BROOKSM6085604-27. The solicitation is issued by Nashville Electric Service under solicitation number Z4871, with a response deadline of August 3, 2026 at 7:00 PM. The contract is classified under a SLED government type and does not specify a set-aside type or NAICS code. The place of performance and the agency's location are both in Nashville, Tennessee. All inquiries and submissions must be directed to Alan Martinez, the primary procurement contact, via email at amartinez@nespower.com or by phone at 615-747-3720. Further details and submission requirements can be accessed through the vendor portal at the provided UI link.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Cable AluminumThe contract specifies a custom-built stranded compressed aluminum conductor cable with sixteen #12 AWG round copper concentrics and a minimum 70 mils point polyethylene jacket marked with red stripes, manufactured to meet the latest edition of NES Specification EC-276. A single 1,500-foot length of this cable is required, and it must be shipped on open flatbed trucks unless prior written approval is obtained for alternative shipping methods. Each reel must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with a minimum inside diameter of 2.75 inches. The reel dimensions are strictly limited to no more than 43 inches wide by 72 inches high, and the maximum cable diameter cannot exceed 1.89 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation is issued by Nashville Electric Service under reference number Z4868, with bids due by August 5, 2026, and the point of contact for procurement inquiries is Jay Thompson at jethompson@nespower.com.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Tire CleanerNashville Electric Service is soliciting tire cleaner under solicitation number Z4873, with a response deadline of August 3, 2026, at 7:00 PM Eastern Time. The product required is a 32 fluid ounce trigger spray bottle of Westleys Bleche-Wite White Wall/Blackwall Tire Cleaner, and only approved manufacturers and part numbers CMLTIRE19-100, WESTLEYS555, TRW640651, and NAPA800002224 are acceptable. The solicitation is classified under a State, Local, and Educational (SLED) organization type, and performance is required in Nashville, Tennessee. The procurement contact is Alan Martinez, who can be reached at 615-747-3720 or amartinez@nespower.com for inquiries. The contract portal for submissions and further details is accessible through the vendor portal at the provided web link.

Tire and Tube Merchant Wholesalers

POSTED

DEADLINE

Paper TowelsThe contract calls for the supply of 2 ply paper towel rolls with a minimum sheet size of 11 inches by 8.75 inches and a minimum of 85 sheets per roll, packaged in cartons of 30 rolls each. Only products from approved manufacturers, specifically Georgia Pacific part number 27385 and Boardwalk part number 6272, are eligible for submission. The solicitation, identified by number Z4875, is issued by the Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. Proposals must be submitted by August 4, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. All deliveries are to be performed in Nashville, Tennessee, and inquiries can be directed to Procurement Contact Shanna Faulk via email at sfaulk@nespower.com or phone at 615-747-3578, with additional details available through the vendor portal link provided.

Stationery and Office Supplies Merchant Wholesalers

POSTED

DEADLINE

Fuel FilterNashville Electric Service is soliciting bids for a fuel filter designated as FILTER FUEL MC FG2 FUEL FILTER, with approval limited to the part number FLEETFF149. The solicitation, identified by number Z4869, was posted on July 28, 2026, and requires responses no later than August 3, 2026, at 7:00 PM Eastern Time. This procurement is categorized under state, local, and education (SLED) procurement and is being managed by the agency’s Tennessee operations in Nashville. The place of performance is also Nashville, Tennessee, with no specific zip code provided. Alan Martinez, Procurement Contact, serves as the primary point of contact and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Interested vendors must submit their proposals through the official vendor portal linked via the provided UI link.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Relay SocketThe contract solicits a 8-pin screw terminal surface mount relay socket rated for 10 amperes, with approved manufacturers limited to YOUNGNDS-8, MAGNACRF70-464-1, and POTTERB27E122 or equivalent models. This item is being procured by Nashville Electric Service under solicitation number Z4874, which was posted on July 28, 2026, with responses due by August 4, 2026. The procurement falls under a State, Local, or Education (SLED) agency classification and is intended for performance in Nashville, Tennessee. All bids must comply with the specified technical requirements and approved part numbers, and no substitutes are permitted unless explicitly designated as equal. The primary point of contact for procurement inquiries is Shanna Faulk, reachable via email at sfaulk@nespower.com or phone at 615-747-3578, and additional details can be accessed through the vendor portal at the provided link.

Relay and Industrial Control Manufacturing

POSTED

DEADLINE

Cable CopperThe cable is a stranded compact copper conductor with a 5 mil helically applied copper tape shield and a minimum 70 mil point thickness polyvinyl chloride jacket, manufactured to meet the latest edition of NES Specification EC-562. Each order consists of three 1,000-foot lengths of single conductor cable, paralleled on individual reels to total 3,000 circuit feet. The cable must not exceed a nominal diameter of 1.60 inches and must be shipped on open flatbed trucks unless prior approval is obtained for alternative transport. All reels must be steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 96 inches in height. Each reel must be clearly stamped with the tare weight, net weight, and gross weight. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation, issued by Nashville Electric Service in Tennessee, has a response deadline of August 10, 2026, and is accessible through the vendor portal linked in the contract data.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Locking BandThe locking band is a one-piece band constructed of 304 stainless steel with a thickness of .022 inches, designed for quick, tool-free installation on electric meters. It features an integrated thumb screw with a flathead slot for manual tightening or loosening, and both the thumb screw and its receiver are permanently affixed to the ring to prevent loss of parts and enable one-handed operation. The band opens and closes by engaging the thumb screw into its receiver and can be secured with or without a barrel lock for added flexibility. A standardized slot is incorporated to accept a common seal, and the design allows side-entry installation from either side of the meter. The optional barrel lock includes a keyless insertion system, is compatible with Nashville Electric Service’s current keying standard, and features a weather seal to guard against dirt and debris. The barrel lock is standard length and ensures durability in outdoor conditions. The contract, titled Locking Band and identified by solicitation number Z4867, is issued by Nashville Electric Service under the Tennessee state agency and is open for bid through the vendor portal. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. The sole approved manufacturer and part number is DEWAL CH3001. Procurement inquiries should be directed to Alan Martinez, the primary contact, via email at amartinez@nespower.com or by phone at 615-747-3720. The performance location is Nashville, Tennessee, and the contract is targeted at state, local, and educational government entities under a SLED classification. Bidders must comply precisely with the material, dimensional, and functional specifications to meet the technical requirements for secure, long-term utility use.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of 22" Windshield Wiper Blades (TRICO 22-15B / MASTER P MP22B)Nashville Electric Service is seeking to procure 900 units of 22-inch windshield wiper blades, specifically the TRICO 22-15B or MASTER P MP22B models, with no installation or additional services required. The solicitation is classified as a subcontract under NAICS code 336370 and was posted on July 24, 2026, with responses due by July 30, 2026, at 7:00 PM. The place of performance is in Nashville, and interested parties must submit their bids through the vendor portal at the provided link. All units must meet the specified model requirements, and vendors are expected to deliver the product as-is without any added support services.

Motor Vehicle Metal Stamping

POSTED

DEADLINE