This Sources Sought opportunity from Department Of Defense was posted on April 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Repair and Calibration of Rohde & Schwarz Spectrum Analyzers

Closed

PZZG0415Federal

Submission Closed04/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Town Clock Rehabilitation

Solicitation # BD-26-1657-BOS03-BOS03-133342

The Town of Berlin is seeking written quotations from qualified contractors for the rehabilitation of the First Parish Town Clock located at 24 Central Street in Berlin, Massachusetts. The selected contractor will be responsible for providing all necessary labor, materials, equipment, supervision, transportation, rigging, and incidentals required to complete the project. Interested parties must submit sealed general bids to the Town Administrator at 23 Linden Street, Room 206, Berlin, MA 01503. The deadline for submission is September 30, 2026, by 2:00 p.m. local time. This solicitation is identified by bid number 2026-003 and is managed by the primary point of contact, Michael Tusino.

BOS03 - Town of Berlin

POSTED

DEADLINE

Statewide Standby Generator, ATS & UPS Preventive Maintenance Services

Solicitation # BD-27-1107-FREG5-ACCOU-133129

The Massachusetts Trial Court, through the Office of Court Management, Facilities Management & Capital Planning, is soliciting bids for statewide preventive maintenance, inspection, operational testing, load-bank testing, repair, and emergency services for standby generators, automatic transfer switches, and uninterruptible power supply systems. The contract is structured into five independent regional award groups, with each region being awarded to the lowest responsible and eligible bidder. The initial performance period is 32 months, running from November 1, 2026, to June 30, 2029, with two optional one-year renewals available through June 30, 2031. Bidders must submit their response packages electronically via the COMMBUYS portal by September 30, 2026, including a bid deposit of at least 5 percent of the greatest possible bid amount per region. Award evaluation is based on bid responsiveness, eligibility, and the lowest evaluated regional price, with a requirement that contractors demonstrate the capacity to perform in multiple regions simultaneously if awarded more than one. Contractors must adhere to NFPA 70B, the Massachusetts Comprehensive Fire Safety Code, and the Massachusetts Electrical Code, and are required to provide detailed electronic service reports as a condition of payment. Payments are processed via Electronic Funds Transfer through the Comptroller's system, typically 45 days from invoice receipt.

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

DEADLINE

MY700 and MY300 Technical Repair and Maintenance

POSTED

DEADLINE

28V DC and 400 Hz Helo Power Supply Load Testing

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Life Saving, Firefighting & Safety Equipment

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Propulsion & Auxiliary Machinery Maintenance

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Omnicell Automated Dispensing System Maintenance

Department Of Veterans Affairs

POSTED

DEADLINE

Automated Logic Control (ALC) BMS Maintenance

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Calibration of Equipment for 249th EN BAT

Solicitation # W912HQ26QA031

The Department of Defense, through the W4LD USA Hecsa office, is soliciting bids for the calibration of equipment for the 249th EN BAT under solicitation number W912HQ26QA031. This requirement falls under NAICS code 811210 and is managed by the office located in Alexandria, Virginia. Interested parties must submit their responses by the deadline of September 14, 2026. Primary contact for this opportunity is Giorgiana Chen, with Jordan Baker serving as the secondary point of contact. Additional details and amendments are available through the provided solicitation documents.

POSTED

DEADLINE

Notice of Intent to Award to a Single Source - Maintenance Service for Molecular Devices SpectraMax Paradigm Multi-Mode Microplate Readers - PCA-NIAID-09685

Solicitation # PCA-NIAID-09685

The National Institutes of Health National Institute of Allergy and Infectious Diseases intends to award a one-year firm-fixed-price contract to Molecular Devices for the maintenance of SpectraMax Paradigm Multi-Mode Microplate Readers. The services will be performed at the NIH Vaccine Immunology Program Lab in Gaithersburg, Maryland, and include a compliance assurance service plan, onsite performance assurance, onsite essential protection, and the replacement of consumable parts. This is a sole-source procurement based on the determination that using the proprietary factory service is necessary to maintain data integrity and control for ongoing research studies. While this is not a request for competitive quotations, interested parties may submit capability statements to James French by September 16, 2026, for consideration before a final award decision is made.

National Institutes Of Health

POSTED

DEADLINE

16--BUS POWER CONTROL U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB26

This presolicitation under number N0038326QNB26 is for the repair and modification of 11 units of Bus Power Control U, identified by NSN 7R-1680-015854816-P8. The delivery terms are FOB Origin. Due to the flight critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by approved sources, this requirement necessitates engineering source approval by the design control activity to ensure part quality. The government intends to solicit this requirement from a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved as a source must submit the required documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Failure to provide the necessary qualification data will result in the proposal not being considered.

Navsup Weapon Systems Support

POSTED

DEADLINE

66--COMPUTER,FLIGHT CON, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC24

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of flight control computers. The requirement is for seven units under NSN 7R-6615-016276036-P8, utilizing TDP version 001, with delivery terms set as FOB Origin. The solicitation, numbered N0038326QSC24, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → FA9302 Aftc PzzView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Edwards, CA, 93524, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 15

Sources Sought

Response DeadlineApr 20

Deadline has passed

Submission Closed

04/20/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA9302 Aftc Pzz

Contacts2 people available

OfficeEDWARDS AFB, CA, 93524-1185, USA

Organization / Agency

Department Of Defense → FA9302 Aftc Pzz

View Agency Profile

Office AddressEDWARDS AFB, CA, 93524-1185, USA

Contacts

Carmen Barahona

contact@example.gov

Karla Vazquez

contact@example.gov

Full Description

Description(s): SOURCES SOUGHT FOR REPAIR AND CALIBRATION SERVICES OF ROHDE & SCHWARZ SPECTRUM ANALYZERS

THIS IS A MARKET SURVEY FOR INFORMATION ONLY. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT WILL BE AWARDED FROM THIS SYNOPISIS. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS SYNOPSIS OR ANY FOLLOW-UP INFORMATION REQUESTS. THE PURPOSE OF THIS SYNOPSIS IS TO GAIN KNOWLEDGE OF POTENTIALLY QUALIFIED SOURCES AND THEIR SIZE CLASSIFICATIONS (SMALL BUSINESS, LARGE BUSINESS, ETC.). PLEASE DO NOT REQUEST A COPY OF A SOLICITATION, AS ONE DOES NOT EXIST.

1. Purpose.

This is a Sources Sought in support of Market Research being conducted by the United States Air Force to identify potential sources for obtaining depot-level repair and calibration services for three (3) non-operational Rohde & Schwarz FSV40-N Signal and Spectrum Analyzers.

2. Requirement.

The contractor shall provide all necessary labor, parts, materials, facilities, and transportation required to perform depot-level repair, adjustment, modification, and calibration on three government-owned signal analyzers. The objective is to restore each unit to a like-new, fully functional condition that meets all original equipment manufacturer (OEM) specifications and to provide a comprehensive warranty for the entire unit.

The contractor shall perform the following for each of the three units:

Task 1: Evaluation and Repair: Conduct a full diagnostic evaluation to identify all faults and perform a "Standard Price Repair" to restore each unit to full functionality. This includes replacing any failed or degraded components.
Task 2: System Updates: Implement all mandatory preventive maintenance procedures and reliability modifications as specified by the OEM (Rohde & Schwarz).
Task 3: Calibration and Verification:
- Perform a full calibration of each unit within an ISO 9001-certified facility.
- The calibration process must align with IEC/ISO 17025 standards and utilize a non-binary decision rule with guard-banding (compliant with ILAC-G8).
- Verify complete product specifications and provide documented test results demonstrating the unit meets all "like-new" OEM performance parameters.

3. Information requested.

The Government requests interested offerors that can fully support this requirement furnish the following information:

a. Company name, SAM Unique Entity ID (UEI) and Cage Code, address, points of contact, phone numbers and e-mail addresses.

b. Information should include a brief description of experience in providing the services specified above. The information package must be clear, concise, and complete. The Air Force is under no obligation to provide feedback to the company, or to contact the company for clarification of any information submitted in response to this request.

c. Identification of business size (small or large) and identify the socioeconomic disadvantaged category, as defined in RFO 19 and currently listed in the System for Award Management (SAM). Small business size standards are published by the U.S. Small Business Administration (SBA) and may be found at www.sba.gov/size/sizetable2002.html. The potential North American Industry Classification System (NAICS) codes assigned to this procurement is 811210 “Electronic and Precision Equipment Repair and Maintenance”. The Small Business Size Standard is $34,000,000.00.

d. Any other information deemed useful to the Air Force. Information packages should be limited to no more than 3 pages.

4. Inquiries.
Any qualified and interested companies responding to this announcement must be able to support all areas. NO partial support responses from industry will be accepted.

The due date and time for responses to this Sources Sought is 12:00 PM Pacific Daylight Time on Monday 20 April 2026.