Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Repair and Testing of Data Interface Units

Active

Response Deadline10/15/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves the full repair, inspection, and testing of Data Interface Units (NIIN: 015325826) for prime contractors. The selected provider must execute all work according to original manufacturer specifications and drawings, ensuring that delivered units meet strict government performance standards. Quality control and packaging must adhere to MIL-STD-2073, and the contractor is required to maintain NIST SP 800-171 compliance to ensure the protection of Controlled Unclassified Information. The project is based in Mechanicsburg, Pennsylvania, under NAICS code 811219. Interested parties must respond by October 15, 2026, to meet the requirements of this naval support project.

General Info

Repair, inspect, and test Data Interface Units for Navy support in Mechanicsburg, PA.

Agency

Department Of The Navy → Navsup Weapon Systems Support MechView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QDB82.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INTERFACE UNIT,DATA — 7025015325826 — N0010426QDB82

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 08:30:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs full repair of the INTERFACE UNIT, DATA (NIIN: 015325826) for prime contractors on NAVSUP projects. Executes repairs, inspection, and testing per original manufacturer specifications and drawings. Implements quality programs and packages units per MIL-STD-2073. Requires NIST SP 800-171 compliance for CUI protection. Delivers repaired and tested units meeting government performance standards.

Similar Contracts

Same NAICS industry code

Field Service Engineering for CBC AnalyzersThis subcontract for Field Service Engineering for CBC Analyzers involves performing preventive maintenance and corrective repairs on Sysmex XN 2000 and XN 550 analyzers at Fort Stewart, Georgia. Supporting prime contractors on Defense Health Agency projects, the service provider is responsible for executing PMCS to ensure equipment remains operational, providing on-site technical support, and repairing hardware components. The contract requires strict compliance with DoD Directive 8500.1 and Army IAV alerts, with deliverables consisting of maintained analyzers and detailed PMCS logs. Classified under NAICS code 811219, the opportunity was posted on September 15, 2026, with a response deadline of September 18, 2026.

Defense Health Agency

POSTED

about 15 hours ago

DEADLINE

Circuit Card Assembly (CCA) Repair and Modification ServicesThis subcontract for Circuit Card Assembly (CCA) Repair and Modification Services supports the Department of the Navy via Navsup Weapon Systems Support Mech. The contractor is responsible for the teardown, evaluation, repair, and modification of electronic assemblies, specifically focusing on NSN 5998-01-542-6569. Key technical requirements include the use of electronics diagnostic equipment, the implementation of mercury-free processes, and the management of configuration changes and technical documentation. The project is performed in Mechanicsburg, Pennsylvania, under NAICS code 811219. All work must strictly adhere to the Buy American Act as well as applicable Military and Federal Specifications. The solicitation was posted on September 15, 2026, with a response deadline of October 15, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

Primescan AC Warranty and Maintenance SupportThis subcontract is for the provision of warranty coverage and technical support for the Primescan AC Intraoral CAD/CAM Scanner, supporting prime contractors on Department of Veterans Affairs projects. The selected provider must hold Authorized Service Provider status to deliver an active warranty agreement and ongoing maintenance services in accordance with both OEM and VA specifications. Managed by the Network Contract Office 15 within the Department of Veterans Affairs, the contract falls under NAICS code 811219. The place of performance is located in Wichita, Kansas, with a response deadline of September 18, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Medical Device Maintenance and Technical SupportThis subcontract with the Department of Veterans Affairs focuses on the medical device maintenance and technical support of Envella Bed rental units. The selected provider will be responsible for performing routine maintenance, calibration, and technical repairs for prime contractors on medical equipment rental projects. This includes providing on-site technical support and preventative maintenance for surgical appliance electronics and mechanics using specialized Envella diagnostic tools to ensure all rental equipment is fully operational. To qualify for this engagement, the contractor must provide manufacturer-certified technicians. The project is categorized under NAICS code 811219 and is managed by the Network Contract Office 02. Interested parties must respond by September 21, 2026, for performance in the 11768 zip code area.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Laboratory Equipment Training and Maintenance SupportThis subcontract for the National Institutes of Health Olao under the Department of Health and Human Services involves providing technical training and warranty support for prime contractors on Office of the Director projects. The scope of work focuses on the use, maintenance, and troubleshooting of Mettler Toledo SPE404-C modules, requiring specialized expertise in high-precision mass accuracy and fragmentation capability equipment to ensure reliable operation. The project is based in Durham, North Carolina, and is categorized under NAICS code 811219. The primary deliverables include the completion of training sessions and the provision of a valid warranty agreement. The solicitation was posted on September 12, 2026, with a response deadline of September 16, 2026.

National Institutes Of Health Olao

POSTED

DEADLINE

in about 8 hours

Laboratory Equipment Installation ServicesThis subcontract for Laboratory Equipment Installation Services involves the physical installation and setup of 22 liquid handling robots for prime contractors on USDA projects. The scope of work includes unpacking, positioning, and integrating the equipment into the laboratory environment, followed by testing and verification to ensure operational readiness according to manufacturer specifications and USDA site safety regulations. The project is managed by the Department of Agriculture under the FSIS OAS PCMB agency and will be performed in Stuttgart, Germany. The contract falls under NAICS code 811219, with a response deadline of September 17, 2026. The final deliverable is the provision of fully installed and operational robots.

Usda, Fsis, Oas Pcmb

POSTED

DEADLINE

Ultrasound Equipment Training and Maintenance SupportThis subcontract, titled Ultrasound Equipment Training and Maintenance Support, is issued by the Department of Homeland Security's Mission Support Contracting Division. The project focuses on providing technical training and support for prime contractors at the CBP U.S. Border Patrol Canine Academy located in Fort Bliss, Texas. The scope of work includes delivering manufacturer-certified training on ultrasound system operation, providing technical operations manuals, and ensuring 24/7 customer support. Additionally, the contract covers the execution of a one-year standard parts and software warranty to maintain equipment functionality. This opportunity is designated as a total Small Business Set Aside under NAICS code 811219. The solicitation was posted on September 11, 2026, with a response deadline of September 16, 2026.

Mission Support Contracting Division

POSTED

DEADLINE

in about 11 hours

Imaging System Installation and Configuration ServicesThis subcontract for the National Institutes of Health Olao involves the physical installation, software configuration, and system integration of Storm widefield imaging systems. The selected provider will be responsible for installing Z4 workstations and Kinetix 22 cameras, activating NIS-Elements software modules, and ensuring proper system communication. Technical proficiency in SCMOS camera integration and NIS-Elements software is required to deliver a fully operational and tested system. The project is located in Bethesda, Maryland, and falls under NAICS code 811219. Interested parties must respond by September 21, 2026, for this Department of Health and Human Services initiative.

National Institutes Of Health Olao

POSTED

DEADLINE

Installation and Setup of Blood Gas Control SystemThis subcontract with the Department of Veterans Affairs, specifically Rpo East, involves the physical installation, calibration, and initial setup of a blood gas control system for projects at the VA Boston Healthcare System. The selected provider will work under prime contractors to configure the system for precise automated gas level control and verify its performance within an MRI environment to ensure a fully operational delivery. The project requires the contractor to hold specific technical certifications for the equipment and maintain strict compliance with VA facility access and safety protocols. Interested parties must respond by September 25, 2026, for this opportunity categorized under NAICS code 811219.

Rpo East (36C24E)

POSTED

DEADLINE

Bruker 500 MHz NMR & CryoPlatform Service ProviderThis subcontract involves providing specialized maintenance and emergency recovery services for a Bruker 500 MHz UltraShield NMR instrument and CryoPlatform supporting USDA Agricultural Research Service projects. The scope of work includes performing magnet recovery following a loss of field, installing Topspin software and firmware updates, and providing ongoing remote desktop support and monitoring. Additionally, the provider is responsible for installing government-furnished replacement computers in compliance with Section 508 standards to ensure the delivery of a fully operational NMR instrument. The contract is managed by the Department of Agriculture under the USDA Ars Afm Apd agency, with the place of performance located in Madison. Classified under NAICS code 811219, the opportunity was posted on September 11, 2026, with a response deadline of September 18, 2026.

USDA Ars Afm Apd

POSTED

DEADLINE

System Integration, Commissioning, and TrainingThis subcontract for the National Research Council of Canada involves the assembly, commissioning, and training services for calorimeter and cycler components. The scope of work includes calibrating the system to operate within a temperature range of -30°C to 80°C and meeting measurement specifications between 5mW and 100W, followed by comprehensive performance verification tests. The project concludes with the delivery of a fully operational system and the provision of basic operational training for NRC personnel using specific calibration tools and test battery cells. Performance of these services will take place in Ottawa, with a response deadline set for September 16, 2026.

National Research Council of Canada

POSTED

DEADLINE

in about 16 hours

Electronics Component Repair and Soldering ServicesThis subcontract for Electronics Component Repair and Soldering Services supports US Navy NAVSUP Weapon Systems Support projects by providing specialized technical services for Fuel Control Panel circuitry. The scope of work involves the disassembly, cleaning, and inspection of units against overhaul manual limits, followed by precision soldering and assembly in accordance with IPC/EIAJ-STD-001C standards. The final deliverable is a fully repaired and reassembled Fuel Control Panel sub-assembly. The project is based in Philadelphia, Pennsylvania, and requires the use of electronic diagnostic tools and precision soldering equipment. Interested parties must respond by October 13, 2026, for this effort falling under NAICS code 811219.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

Electronic Component Supplier (NSN 5998-01-542-6569)This subcontract involves the supply of circuit card assemblies and individual sub-components for prime contractors supporting the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The scope specifically focuses on sourcing new or refurbished components for NSN 5998-01-542-6569, with deliverables being shipped to either the prime contractor or a government facility in Mechanicsburg, Pennsylvania. The supplier is required to provide country of origin certification in compliance with the Buy American and Balance of Payments Program and must certify that all components are mercury-free. This opportunity falls under NAICS code 423610 and has a response deadline of October 15, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Sleeve Bearing Repair and Overhaul (NSN 3120-01-268-3117)This subcontract for the Department of the Navy involves the teardown, evaluation, repair, and modification of sleeve bearings under NSN 3120-01-268-3117. The contractor is responsible for disassembling bearing assemblies, assessing wear and tolerances, and performing precision machining and resurfacing to ensure compliance with Technical Data Package Version O04 and Part number 4051G54-G03. The scope of work requires the use of precision lathes, grinders, and micrometers to deliver two repaired and certified sleeve bearings. The project is performed in Mechanicsburg, Pennsylvania, and falls under NAICS code 332710. Key compliance requirements include certifying the country of origin in accordance with the Buy American Act. The solicitation was posted on September 15, 2026, with a response deadline of October 15, 2026.

POSTED

about 23 hours ago

DEADLINE

MIL-STD-2073 Compliant PackagingThis subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves providing specialized packaging services for repaired components. The contractor is responsible for packaging NSN items in strict accordance with MIL-STD-2073, utilizing military-grade preservatives, moisture barriers, and specialized crates to ensure the prevention of corrosion and damage during transit. The final deliverable includes the secure packaging and labeling of repaired components for shipment. The project is categorized under NAICS code 561910 and is designated as an SBA set-aside. Performance of the contract will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of October 15, 2026.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Repair and Modification of NSN 6130-01-603-9484This subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves the teardown, evaluation, repair, and modification of NSN 6130-01-603-9484. The selected provider will be responsible for executing complete assembly teardowns, performing technical wear evaluations, and conducting repairs to meet operational specifications. Additionally, the scope includes applying Depot Level Repairable labels and Item Unique Identification markings to ensure the components are fully repaired and ready for service. The project is categorized under NAICS code 811210 and is designated as an SBA set-aside. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by October 15, 2026, following the posting date of September 15, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Supply of Specialized Materials for Indicator SubassemblyThis subcontract with the Department of the Navy's NAVSUP Weapon Systems Support MECH involves the supply of specialized materials for indicator subassemblies. The contractor is responsible for providing raw materials, castings, or precision-machined base components that meet the technical specifications of reference number 9211-04-1012. All materials must be accompanied by mill test reports for certification and must comply with the Buy American and Trade Agreements Act. The project is categorized under NAICS code 331210 and is designated as an SBA set-aside. Performance of the contract will take place in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by October 15, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 23 hours ago

DEADLINE

Manufacture of Indicator Subassembly (NSN 6680-01-625-3102)This subcontract involves the manufacture of the Indicator Subassembly (NSN 6680-01-625-3102) for the Department of the Navy's Navsup Weapon Systems Support Mech. The contractor is responsible for fabricating the subassembly according to Cage Code 0BHF9 and reference number 9211-04-1012, ensuring all physical identification and marking comply with MIL-STD-130, REV N. Performance of this contract requires specialized precision machining and assembly equipment and must adhere to the Buy American and Trade Agreements Act. The project is categorized under NAICS code 334413 and is designated as an SBA set-aside. Work will be performed in Mechanicsburg, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of October 15, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Flow Control Regulator Replacement Parts SupplyThis subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves the supply of high-tolerance seals, springs, valves, and internal components for Flow Control Regulator NIIN 005877554. The contractor is responsible for sourcing OEM or qualified equivalent parts that meet strict specifications and delivering these certified replacement components to the repair facility located in Mechanicsburg. To be eligible, providers must maintain ISO 9001 compliance and provide certification for the Buy American and Balance of Payments Program. This opportunity is designated as an SBA set-aside under NAICS code 811210, with a response deadline of October 15, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Flow Control Regulator Repair and OverhaulThis subcontract for the Department of the Navy's Navsup Weapon Systems Support Mech involves the teardown, evaluation, repair, and modification of Flow Control Regulators. The selected provider will be responsible for disassembling units to identify failure points and restoring them to operational specifications according to TDP Version No. 05. Final deliverables must include fully repaired and certified regulators equipped with DLR labels. The project is based in Mechanicsburg and requires the contractor to maintain ISO 9001 certification and the capability to provide Unique Item Identifiers. This opportunity is designated as an SBA set-aside under NAICS code 811212, with a response deadline of October 15, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Supply of Replacement Parts for Data Interface UnitsThis subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves the supply of internal components, circuit boards, and hardware for the Data Interface Unit, NIIN 015325826. The contractor is responsible for providing authentic OEM parts or approved equivalents that adhere to original manufacturer specifications, ensuring all items are delivered directly to the designated repair facility in Mechanicsburg, Pennsylvania. The agreement requires strict adherence to the Trade Agreements Act and Buy American certification of origin. Under NAICS code 423610, the contract was posted on September 15, 2026, with a response deadline of October 15, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Repair and Calibration of Pressure Transmitters (NSN 6685-01-438-3414)This subcontract involves the repair and calibration of pressure transmitters under NSN 6685-01-438-3414 for the Department of the Navy, specifically the Navsup Weapon Systems Support Mech. The scope of work includes the teardown, evaluation, repair, and modification of seven pressure transmitters to support US Navy equipment restoration projects. The contractor is responsible for disassembling units to identify faults, performing technical repairs to functional specifications, and conducting final functional testing. All deliverables must adhere to strict military standards, including physical identification per MIL-STD-130 and shipping markings per MIL-STD-129. The project is categorized under NAICS code 334413 and will be performed in Mechanicsburg, Pennsylvania. The response deadline for this opportunity is October 15, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

TRANSMITTER,PRESSUR — 6685014383414 — N0010426QND89

Solicitation # N0010426QND89

This solicitation is for the repair of pressure transmitters for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The contract requires the vendor to perform a teardown and evaluation of provided carcasses within 90 days to submit a firm-fixed price quote for the full repair effort. The requested repair turnaround time is approximately 92.571 days, and failure to meet this timeline will result in a per-unit price reduction. The award will be issued bilaterally and is certified for national defense under the Defense Priorities and Allocations System. Key technical requirements include adherence to MIL-STD-130 for marking and strict mercury-free compliance to prevent contamination of submarine and surface ship systems. The contractor is responsible for all inspection and testing according to original manufacturer specifications, with a one-year warranty provided from the date of delivery. Only authorized distributors of the original manufacturer's item will be considered for the award, and the government retains the option to increase the quantity of the order within 365 days of the award.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS