Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 2, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

REPAIR KIT FOR NARRAGANSETT PROPULSION

Awarded
N00421-12-T-0478Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
NAVY NP FENDER RENEWAL
Solicitation # 70Z04027Q60514Y00
The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to perform a rubber fender system renewal on a 108-foot Yard Patrol Craft. The scope of work includes the removal of existing upper and lower fendering, securing bars, and hardware from the exterior hull and transom, followed by the installation of new rubber fenders and associated hardware. Specific requirements include replacing up to 60 linear feet of CRES securing flat bars and 75 linear feet of mounting plates and oak shims, as well as installing new studs, nuts, and washers. The government will provide 24 Type-D black EPDM fenders as government furnished material located at the Coast Guard Yard in Curtis Bay, Maryland, which also serves as the place of performance. This is a total small business set-aside conducted under FAR Part 13 Simplified Acquisition Procedures, with awards based on best value considering technical requirements, deadlines, and price. All work must be completed by December 11, 2026. Quotes must be submitted via email to Erica Gibbs by November 16, 2026, at 9:00 am Eastern. Payment will be processed via Net 30 terms through the IPP system, and no down or advanced payments will be provided. Vendors must be able to secure funding until delivery and may need to be registered in the Joint Certification Program to access export-controlled drawings.
CG-SEA-C23

POSTED

about 7 hours ago

DEADLINE

in 17 days
NAICS: 336611
New
Federal
Voyage Repair (VR)
Solicitation # N6817127QN006
Solicitation N6817127QN006 is a Request for Quote issued by NAVSUP FLC Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from November 12, 2026, to November 18, 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, cleaning and inspection of air conditioning and refrigeration plant condensers, rust and corrosion removal, replacement of lagging and insulation, furniture upholstery replacement, and the provision of rigging services and scaffolding. All work must adhere to NAVSEA Standard Items and SCF Part 1915 Occupational Safety and Health Standards for Shipyard Employment. Award will be granted to the lowest priced technically acceptable offeror, with technical capabilities rated as either acceptable or unacceptable. Prospective contractors must submit a completed J-1 Price Breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Required submission documentation includes Standard Form 18, completed Standard Form 30 amendments, and technical qualifications verified via the Attachment J-3 checklist. The deadline for proposal submission is November 2, 2026, at 13:00 CET. Post-award invoicing must be processed electronically through Wide Area WorkFlow.
Navsup Flc Sigonella Naples Office

POSTED

about 7 hours ago

DEADLINE

in 3 days
NAICS: 336611
New
Federal
Misty Barge Dry Dock Services
Solicitation # 1240BF27Q0002
Solicitation 1240BF27Q0002 is a total small business set-aside issued by the USDA-FS CSA Northwest 4 for dry dock services for the Misty Barge, currently located at Shelter Cove on Revillagigedo Island, Alaska. The scope of work includes hauling out the vessel, performing exterior hull sandblasting and painting, repairing the exterior deck and appurtenances, painting the interior hull, and cleaning bilge tanks. All painting must adhere to Preparation and Painting Specification 00300 and manufacturer recommendations, specifically utilizing PPG products. The period of performance extends from the date of award through April 1, 2027, with specific deliverables including a work schedule, coating products list, and interior bilge painting plan due shortly after the start date. Offers are due by November 6, 2026, following an extension granted by Amendment 0001. Proposals must be submitted via email as three separate attachments covering technical capability, past performance, and price. Award will be based on the most advantageous quote, with price serving as the primary evaluation factor. Technical evaluations will focus on the provided draft work schedule and proposed haul-out dates, while past performance will be assessed based on recency and relevancy within the last three years. The contractor is responsible for implementing a Quality Control Plan managed by a designated Quality Control Representative, while the government will maintain Quality Assurance through performance requirements measures.
Csa Northwest 4 Usda-Fs

POSTED

1 day ago

DEADLINE

in 7 days

General Info

Contract Value

$41,158

NAICS

336611 - Ship Building and Repairing

Place of Performance

401 CESAR CHAVEZ STREET PIER 80, SAN FRANCISCO, CA, 94124, USA

Set-Aside

SBA

Award Issued Date

Documents

1

N00421-12-T-0478.doc

DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Air Warfare Center Air Division
Contacts1 person available
OfficePATUXENT RIVER, MD, 20670-1545, USA
Office AddressPATUXENT RIVER, MD, 20670-1545, USA
Contacts

Full Description

Show more
Solicitation N00421-12-T-0478 is issued as a synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on a sole source basis with PROPULSION SYSTEMS, INC. under FAR Part 6.302-1 and under the authority of FAR Part 12 and FAR Part 13. Request is set-aside for Total Small Business under the authority of FAR Part 52.219-6. Offerors must be registered in the Central Contractor Registration (CCR) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.ccr.gov/vendor.cfm. See attached RFQ Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by 5:00 PM EST AUGUST 17, 2012 will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Facsimile proposals are acceptable; the preferred method is via email. Please send information to POC above.

More opportunities from Department Of Defense → Naval Air Warfare Center Air Division

Same awarding agency

NAICS: 334220
New
Federal
Next Generation Tactical Radio (NGTR)
Solicitation # N00421-27-RFPREQ-TPM209-0199
The Naval Air Systems Command (NAVAIR) is conducting market research to identify potential sources for the Next Generation Tactical Radio (NGTR), a modular Software Defined Radio (SDR) intended for U.S. Navy and Marine Corps aircraft. The NGTR is designed as a form, fit, and function backwards-compatible replacement for the ARC-210 Generation 5 and 6 radios. Key technical requirements include support for voice and data waveforms in the VHF and UHF bands with operational capabilities up to 6 GHz, including specific support for SINCGARS, MUOS, and SATURN. The system must feature a small form factor weighing less than 12.2 pounds, a conduction-cooled unit, and a modular Open architecture utilizing OpenVPX and VNX+ standards to facilitate rapid upgrades and obsolescence management. Security is a critical component of the NGTR, requiring a modular High Assurance Device (HAD) to meet NSA cryptographic and Security Evaluation Requirements Document (SERD) standards, as well as compliance with Zero Trust architecture and Risk Management Framework (RMF) controls. The system must also adhere to NSTISSAM TEMPEST 1-92 and CNSSAM standards. Prospective contractors must demonstrate expertise in agile development, Model-Based Systems Engineering (MBSE), and the ability to obtain Top Secret security clearances. The anticipated acquisition timeline includes an Industry Day in the first quarter of FY27, a final RFP release in the fourth quarter of FY27, and a contract award in the second quarter of FY28, with target fleet delivery scheduled for mid-2034.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
Federal
Presolicitation Notice – Sole-Source Requirement for SNC Precision Approach Radar (PAR) AN/SPN-35E Landing System Upgrade Program (LSUP) Basic Ordering Agreement (BOA) Task Order (TO).
Solicitation # N00421-26-RFPREQ-TW00000-1864
The Naval Air Warfare Center Aircraft Division Webster Outlying Field Air Traffic Control and Landing Systems Division is seeking a sole-source contractor to execute the Precision Approach Radar PAR AN/SPN-35E Landing System Upgrade Program LSUP. This effort involves comprehensive project management, systems, hardware, and software engineering, as well as integration, testing, and the development of Engineering Development Modules. The scope further includes qualification testing, analysis, and logistics support to facilitate the fabrication, modification, repair, replacement, and upgrade of critical components. The intended source for this requirement is Sierra Nevada Corporation, identified as the Original Equipment Manufacturer with the necessary technical data and expertise to perform the work. The contract is structured as a Cost Plus Fixed Fee arrangement with completion CLINs and is anticipated to run from May 2027 through May 2032. All work is expected to be performed entirely at the contractor site. Under the authority of Title 10 U.S.C. Section 3204 and FAR 6.103-1, the acquisition is designated as other than full and open competition. Interested parties must submit capability statements by November 12, 2026, detailing their technical experience, access to intellectual property, and ability to meet the performance schedule.
Engineering Services

POSTED

3 days ago

DEADLINE

in 13 days
View Details
NAICS: 488190
New
Federal
T-6/T-34 Aircraft Maintenance and Contractor Logistics Support (CLS): Request for Proposal (RFP)
Solicitation # N0042126R1011
Solicitation N0042126R1011 is a Request for Proposal issued by the Naval Air Warfare Center Air Division for T-6 and T-34 aircraft maintenance and contractor logistics support. The scope of work includes organizational, intermediate, and on-site depot-level maintenance for T-6 aircraft at NAS Corpus Christi, NAS Pensacola, and NAS Whiting Field, as well as O, I, and D-level support for T-34 aircraft at MCAS Miramar, NAF El Centro, NAS Lemoore, and NAS Oceana. Key deliverables encompass general aircraft maintenance, preservation and depreservation services, detachment mobilization and demobilization, and the provision of functional check flight and aircraft recovery pilots. The contract utilizes an indefinite quantity structure with a mix of firm fixed price and cost-reimbursable CLINs. The government will select a single awardee based on best value using a tradeoff process, with technical capability as the most important factor, followed by past performance, and then price. Technical evaluations are rated from Blue (Outstanding) to Red (Unacceptable), while small business participation is rated on a pass/fail basis. Proposals must be submitted electronically via the PIEE Solicitation Module and must adhere to strict formatting requirements, including the use of specific templates for manning, pricing, and corporate experience. Performance periods are scheduled across multiple years, beginning September 1, 2027. Compliance with various FAR and DFARS clauses is required, including strict adherence to cybersecurity reporting and military marking standards for shipments.
Other Support Activities for Air Transportation

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
Federal
Air-Gas Desiccant Driers for AN/SPN-50
Solicitation # N0042127Q1005
Solicitation N0042127Q1005 is a firm fixed-price procurement issued by the Naval Air Warfare Center Air Division for the purchase of Air-Gas Desiccant Driers for the AN/SPN-50, specifically manufacturer part number 0024998501 and national stock number 4440-01-227-2693. This is a brand name procurement for Kijero, LLC, and no substitutions are accepted. The requirement is a total small business set-aside, and the award will be granted to the lowest evaluated price that meets all technical and acceptability standards. All quotes must be submitted via email to Gabrielle King by 4:00 PM Eastern Time on November 2, 2026. To be considered, offerors must be registered in the System for Award Management and provide signed documentation verifying they are an authorized distributor or reseller of the original equipment manufacturer. Submissions must be Trade Agreements Act compliant, include the country of origin, and provide sufficient technical data such as specifications or data sheets. Delivery is required by July 2, 2027, to the facility in Saint Inigoes, Maryland, with the requirement that delivery drivers be U.S. citizens. The contract mandates strict adherence to MIL-STD-130 and MIL-STD-129 for unique item identification and packaging, and invoicing must be processed through Wide Area WorkFlow.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS