This Solicitation opportunity from Department Of Defense was posted on April 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
REPAIR KIT, RADOME
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of a repair kit for a radome, identified by NSN 5985-01-485-7165 and part number 240A054-1, with a quantity of 14 units to be delivered within 318 days to the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging and preservation must comply with MIL-STD-2073-1E, Appendix D, for kits, requiring each kit to be contained in a single box with adequate cushioning to prevent damage, labeled with a detailed contents list including NSNs, part numbers, and quantities per kit. Marking and barcoding must follow MIL-STD-129, and palletization must adhere to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and sampling must conform to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandated unless otherwise stated. Attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The item is not subject to Unique Item Identification per the service customer’s request, but the contractor must comply with CMMC Level 2 Self-Assessment and handle covered defense information per RD002. The contract is issued under SPE4A1-26-T-1964, with a response deadline of May 4, 2026, and the point of contact is Vincent Williams of the Department of Defense’s Aviation Supply Chain.
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
REPAIR KIT, RADOME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
LOCKHEED MARTIN CORPORATION 03640 P/N 240A054-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A1-26-T-1964
SECTION B
PR: 7016471477 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016471477 0001 EA 14.000
NSN/MATERIAL:5985014857165
DELIVERY (IN DAYS):0318
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW NSN PACKAGING REQUIREMENTS, THEN MARKED IAW MIL-STD-129. PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A CONTENTS LIST CONSISTING OF COMPONENT PART NSNS, PART NUMBER AND QUANTITY PER KIT. BOX SHALL BE MARKED AND BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE4A1-26-T-1964
SECTION B
PR: 7016471477 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/19/2027 Original Required Delivery Date:03/19/2027
SPE4A1-26-T-1964 NSN/Part Number: 5985-01-485-7165 Quantity: 14 EA Purchase Request: 7016471477QTY: 14 Delivery: 318 days ADO
More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
