Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on April 17, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Repair Services for Vulcanized Rubber on Fairwater Baffles

Awarded
N32253-19-Q-0043Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses by this date via the designated supplier portal to be considered for the contract.
Washington Metropolitan Area Transit Authority

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Extended Warranty Package Provision
Philadelphia Gas Works

POSTED

about 6 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
International
Chlorine Evaporator Maintenance and Inspection ServicesThis subcontract opportunity with the Ontario Clean Water Agency involves providing annual maintenance and detailed technical inspections of chlorine evaporators and related chlorinator services. The selected supplier will be responsible for utilizing specialized equipment to service evaporator units and must possess qualified status for the handling of hazardous materials. All work must culminate in the delivery of comprehensive annual maintenance and inspection reports. The project is based in Canada and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of November 27, 2026. This contract is designed for suppliers capable of supporting prime contractors on OCWA projects through specialized technical expertise in chlorination systems.
Ontario Clean Water Agency

POSTED

about 6 hours ago

DEADLINE

in 29 days
NAICS: 811310
New
SLED
Air Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Specialized Heat Exchanger Maintenance (Preventive & Corrective)
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Compressor Auxiliary Systems Maintenance
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Gas Packager Compressor Maintenance Services
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Ariel Gas Compressor Maintenance Services
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Vapor Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 7 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

Solicitation N32253-19-Q-0043 is a request for quotes from the Pearl Harbor Naval Shipyard IMF for repair services for vulcanized rubber on fairwater baffles. While issued as a sole source request to B.F. Goodrich under 10 U.S.C. 2304(c)(1), the government will consider quotes from any company capable of meeting the requirements. The procurement falls under NAICS code 811310 with a size standard of 7.5 million dollars and adheres to FAR Subpart 12.6 and relevant Federal Acquisition Circulars. Interested parties must be registered with the System for Award Management and submit written offers via email to the designated contract specialist. Quotes were due by April 1, 2019, and must follow the specified CLIN structure. Submissions are required to confirm the ability to meet the requested period of performance or provide the necessary lead time for completion.

General Info

Agency

Department Of Defense → Pearl Harbor Naval Shipyard IMF

Contract Value

$99,868

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Contractor Facility, HI, USA

Set-Aside

NONE

Awardee

GOODRICH CORPORATION

Award Issued Date

Documents

1

N32253-19-Q-0043.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pearl Harbor Naval Shipyard IMF
Contacts1 person available
OfficePEARL HARBOR, HI, 96860-5033, USA
Organization / AgencyDepartment Of Defense → Pearl Harbor Naval Shipyard IMF
Office AddressPEARL HARBOR, HI, 96860-5033, USA
Contacts
Megan K. HoContract Specialist
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This combined synopsis/solicitation is issued as a sole source request for quote RFQ N32253-19-Q-0043 to B.F. Goodrich is in accordance with 10 U.S.C. 2304(c)(1). However, companies that believe they are capable of meeting the requirement may submit a quote which will be considered by the Government. A Sources Sought regarding this solicitation was posted on 3/15/19: https://www.fbo.gov/spg/DON/NAVSEA/N47456/N32253-19-X-XXXX/listing.html Submit written offers in accordance with the CLIN structure outlined in the attached announcement. Oral offers will not be accepted. All firms or individuals responding must be registered with the System for Award Management (SAM) (https://www.sam.gov). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2019-01, DFARS DPN 20180928, and NMCARS 18-04. North American Industrial Classification Standard (NAICS) 811310 and Size Standard of $7.5M apply to this procurement. Quotes are due to this office no later than 01 April 2019 08:00 AM, Hawaiian Standard Time. Quotes must be sent via e-mail to the point of contact. Within the quote, please reference the capability to meet the requested POP. If unable, please include the LEAD TIME required.

More opportunities from Department Of Defense → Pearl Harbor Naval Shipyard IMF

Same awarding agency

NAICS: 541380
New
Federal
Troubleshooting, Calibration and as-needed Remedial Repair of Proof Test Machines
Solicitation # N32253-27-Q-0001
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility seeks a small business contractor to provide on-site annual calibration, preventative maintenance, and as-needed remedial repairs for three Government-owned Roberts Testing Proof Test Machines. The equipment includes one vertical proof test hoist stand and two horizontal proof test bed machines located within the Controlled Industrial Area in Hawaii. All calibration services must be NIST-traceable and performed in accordance with ASTM E4 and ISO 17025/Z540 standards, utilizing existing Vishay Indicators and LCp-200 software. The contract is structured with a base period from November 16, 2026, to November 15, 2027, followed by four full one-year option periods and one final six-month option period ending May 15, 2032. This is a total small business set-aside procurement under NAICS code 541380. Award will be granted to the lowest price among technically acceptable offers. To be eligible, offerors must be registered in the System for Award Management, possess a valid CMMC Level 1 Self-Assessment certification, and provide proof of accreditation by a NAVSEA 04-approved body per NAVSEAINST 4734.1B. Proposals must include a technical quote not exceeding 10 pages, an itemized price breakdown, and a completed SF 1449. Contractors are also required to adhere to strict operations security, environmental protection guidelines, and site-specific security requirements for accessing controlled naval areas.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 811210
New
Federal
Repair and Calibration of Keysight Microwave Analyzers
Solicitation # N32253-27-Q-0002
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility intends to award a sole-source, firm-fixed-price contract to Keysight Technologies Inc for the repair and calibration of five Keysight N9918A RF Microwave Analyzers. This action is being conducted under simplified procedures for commercial services, as the government has determined that Keysight Technologies Inc is the only available source capable of meeting the requirement due to proprietary engineering data, software, and specialized testing protocols. While this is a notice of intent to award a sole-source contract rather than a request for competitive quotes, other responsible sources may submit capability statements or proposals to demonstrate their ability to meet the technical and safety requirements. Interested parties must provide documentation electronically to the designated contracting specialists by the response deadline of November 7, 2026. The final decision to compete the contract remains at the sole discretion of the government.
Electronic and Precision Equipment Repair and Maintenance

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 423830
Federal
Supply of Roberts Testing OEM PartsThis subcontract opportunity is for the procurement and delivery of genuine OEM parts and materials to support prime contractors on Pearl Harbor Naval Shipyard IMF projects. The scope of work specifically involves supplying load cells, seals, and indicators for Roberts Testing Proof Test Machines, with all deliveries destined for PHNSY and IMF in JBPHH, Hawaii. To be eligible, providers must hold valid OEM Certification or Authorization. This opportunity is designated as a Total Small Business Set Aside under NAICS code 423830. The response deadline for this Department of Defense requirement is November 2, 2026.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

9 days ago

DEADLINE

in 4 days
View Details
NAICS: 811219
Federal
Remedial Repair of Proof Test MachinesThis small business set-aside subcontract involves providing as-needed remedial repairs for proof test machines at the Pearl Harbor Naval Shipyard IMF. The scope of work requires diagnosing equipment failures within heavy-duty load cells and the hydraulic or mechanical components of Roberts Testing machines, with all repairs executed to restore operational status according to OEM specifications. The successful contractor must maintain CMMC Level 1 compliance to deliver fully repaired and operational proof test machines. Performance will take place at JBPHH in zip code 96860 under NAICS code 811219 for the Department of Defense.
Other Electronic and Precision Equipment Repair and Maintenance

POSTED

9 days ago

DEADLINE

in 4 days
View Details
NAICS: 811219
Federal
Preventative Maintenance for Roberts Testing EquipmentThis small business set-aside subcontract involves providing routine preventative maintenance for Roberts Testing Proof Test Machines, specifically models 80k, 225k/50k, and 1.2M/45k lbf, at the Pearl Harbor Naval Shipyard IMF. The selected contractor will support prime contractors by performing inspections, cleaning, and adjustments strictly following OEM specifications to ensure the operational readiness of the equipment. The project is located at JBPHH in zip code 96860 and falls under NAICS code 811219. To be eligible, contractors must meet CMMC Level 1 requirements. Responses for this Department of Defense opportunity are due by November 2, 2026.
Other Electronic and Precision Equipment Repair and Maintenance

POSTED

9 days ago

DEADLINE

in 4 days
View Details
NAICS: 541380
Federal
Calibration of Roberts Testing Proof Test MachinesThis small business set-aside subcontract involves the high-precision calibration of three government-owned Roberts Testing Proof Test Machines at the Pearl Harbor Naval Shipyard IMF in JBPHH. The selected contractor will be responsible for conducting comprehensive before and after calibration data collection utilizing Vishay Indicators and LCp-200 Proof Testing System Software. All work must adhere to ASTM E4 specifications and requires strict NIST traceability along with ISO 17025/Z540 accreditation. The final deliverables for this project include detailed calibration data, certification stickers, and official certificates. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in 4 days
View Details
NAICS: 423450
Federal
OHD Quantifit2 Genuine Replacement Parts SupplyThis subcontract with the Pearl Harbor Naval Shipyard IMF under the Department of Defense involves the procurement of genuine, new, and non-refurbished replacement parts for OHD Quantifit2 Respirator Test Fit machines. The scope of work requires the sourcing and delivery of OEM components, specifically focusing on pumps, optics, sampling systems, and scattering chambers that adhere strictly to OEM specifications. The contract is categorized under NAICS code 423450 and specifies that all parts must be delivered directly to the designated service facility. Performance will take place at JBPHH in zip code 96860, with a response deadline set for September 9, 2029.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

2 months ago

DEADLINE

in almost 3 years
View Details
NAICS: 811210
Federal
OHD Quantifit2 Respirator Test Fit Machine Calibration and RepairThis subcontract with the Department of Defense at the Pearl Harbor Naval Shipyard IMF involves the annual preventive maintenance, precision calibration, and remedial repair of twenty-six OHD Quantifit2 Respirator Test Fit machine units. The scope of work includes the inspection of sampling systems, optics, pumps, and scattering chambers in accordance with OEM guidelines. To ensure compliance, the provider must utilize a dedicated service facility and OEM-specific calibration tools. The contractor is responsible for delivering fully calibrated units along with the corresponding service reports and calibration certificates. This project is categorized under NAICS code 811210 and is performed at JBPHH in zip code 96860. The response deadline for this opportunity is September 9, 2029.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in almost 3 years
View Details
NAICS: 811210
Federal
Respirator Test Fit Preventative Maintenance and Calibration
Solicitation # N32253-26-900T-0014
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility intends to award a sole-source, firm-fixed-price contract to OHD, LLLP for the annual preventive maintenance, calibration, and remedial repair of twenty-six OHD Quantifit2 Respirator Test Fit machine units. This requirement is designated as a sole-source procurement because OHD, LLLP holds the proprietary patents for the technology. The scope of work includes disassembling and cleaning units, inspecting operating functions, and ensuring all equipment meets manufacturer specifications. All services must be performed according to Original Equipment Manufacturer guidelines using new, non-refurbished parts. The contract structure consists of a base year from 2026 to 2027 with four subsequent option years extending through 2031. The contractor is required to maintain a Quality Control Plan and provide a dedicated project manager as a single point of contact. Key deliverables for each serviced unit include an inspection report, a service report, and a calibration certificate. While the government covers shipping costs to the contractor's facility, the contractor is responsible for all return shipping costs and must adhere to a strict four-day turnaround time after receiving the equipment.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in almost 3 years
View Details
NAICS: 333415
Federal
Critical Component Supply & Logistics for R-114 SystemThis subcontract with the Department of Defense, managed by the Pearl Harbor Naval Shipyard IMF, focuses on the supply of mission-critical components for the R-114 RAC system. A primary requirement of the contract is the procurement of the Jet Oil Pump, which is designated as a sole-source item requiring specific OEM authorization to ensure technical compliance and system integrity. The performance of this contract will take place at JBPHH in zip code 96860. Under NAICS code 333415, the selected provider must ensure that all components are delivered through compliant logistics channels to support the operational readiness of the R-114 system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Technical Data & Proprietary Methodology SupportThis subcontract, managed by the Pearl Harbor Naval Shipyard IMF under the Department of Defense, focuses on the provision of technical data and proprietary methodology support for the R-114 RAC system. The primary objective is to supply proprietary technical drawings, repair methodologies, and OEM-specific tools necessary to facilitate comprehensive inspection and testing processes. The work is performed at JBPHH in zip code 96860 and falls under NAICS code 541330. This agreement is structured to ensure the delivery of critical technical resources while maintaining exclusive data rights for the proprietary information provided.
Engineering Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 238220
Federal
RAC System Operational Testing & Performance VerificationThis subcontract, managed by the Department of Defense for the Pearl Harbor Naval Shipyard IMF, focuses on the operational testing, diagnostics, and validation of the R-114 RAC system. The primary objective is to verify system performance and ensure full functionality to support submarine readiness. The work will be performed at Joint Base Pearl Harbor-Hickam in the 96860 zip code area. Classified under NAICS code 238220, the contract was posted on August 14, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

3 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
TESS Facility Equipment Annual Maintenance
Solicitation # W9132T19T0018
W2R2 Construction Engrg Labor

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Federal
J--CVD,VA CLS, TI10, IN REPAIR/MODIFICATION OF
Solicitation # N0010419PND60
Navsup Weapon Systems Support Mech

POSTED

over 7 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
Refurbishment of Propeller Shafts
Solicitation # W912DS-19-T-0011
W2SD Endist New York

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
J--Emergency Generator Maintenance Service
Solicitation # 36C25219Q0188
252-NETWORK Contract Office 12 (36C252)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Closed
Federal
ALLIED DUAL POINT DAVIT TROUBLESHOOT AND REPAIR
Solicitation # 70Z08519NP45C5700
Sflc Procurement Branch 2(00085)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
J--UPS Maintenance - SF Base Year: 05/01/2019 to 04/30/2020 PO: 438C99120
Solicitation # 36C26319Q0442

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Closed
Federal
Main Propulsion Diesel Engines (MPDE) Maintenance for United States Coast Guard (USCG) National Security Cutters
Solicitation # 70Z08520IMPDEMAINT
Sflc Procurement Branch 2(00085)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
OPEN, INSPECT AND REPORT INJECTOR ASSEMBLY
Solicitation # 70z08019QAK045
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
J--Regional Hydraulic Cylinder Maintenance, Repair and Rebuild
Solicitation # N4008519R9035
Navfacsyscom Mid-Atlantic

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
TURBO SUPER CHARGER
Solicitation # 70Z08519Q40264B00
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Federal
J--VALVE,PRESSURE EQUA, IN REPAIR/MODIFICATION OF
Solicitation # N0010419PCD46
Navsup Weapon Systems Support Mech

POSTED

over 7 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Elevator Maintenance and Inspection - Yakima, WA
Solicitation # 140R1719Q0017
Denver Federal Center

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS