This Government Contract opportunity from Department Of Commerce was posted on May 24, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Replacement of burners in NIST's Boilers 1 through 4 at the Steam and Chilled Water Generation Plant at the NIST

Awarded

SB1341-13-RP-0022Federal

Submission Closed05/23/2013, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236210

New

AMC-0171 LOU ATCT Public Announcement

Solicitation # amc-0171-lou-atct-public-announcement

Solicitation amc-0171-lou-atct-public-announcement, managed by PTSI Managed Services Inc. (Parsons), seeks a contractor for electrical and architectural improvements in Kentucky. The electrical scope focuses on LPGBS corrections, including the installation of surge protective devices, air terminals, grounding gates, and work on parking lot light poles. Architectural requirements involve exterior siding reinforcement, rust removal, protective painting, caulking, and the replacement of handrails. The estimated construction value is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236210. The solicitation was posted on October 21, 2026, with a response deadline of November 8, 2026.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-169 CVG ATCT Public Announcement

Solicitation # amc-169-cvg-atct-public-announcement

The AMC-169 CVG ATCT project is a comprehensive facility maintenance and repair solicitation managed by PTSI Managed Services Inc. (Parsons) located in Kentucky. The scope of work encompasses a wide range of disciplines, including mechanical testing of internal fan units and disconnect switch replacement, civil improvements such as asphalt milling and sidewalk work, and structural reinforcements to address water-damaged insulation. Architectural repairs are also a primary focus, involving the replacement of the PVC roof, roof hatch repairs, drainage and scupper work, and the installation of new doors, railings, and tiles. This solicitation is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. The estimated contract value is between 1,000,000 and 5,000,000 dollars. Interested parties must submit their responses by the deadline of November 2, 2026, under NAICS code 236210.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-1230-00 VOR counterpoise and roof replacement in Marianna, FL

Solicitation # aso-1230-00-vor-counterpoise-roof-replacement-marianna-fl

POSTED

DEADLINE

AMC-0158 NEW RTR Public Announcement

Solicitation # amc-0158-new-rtr-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive set of facility repairs and upgrades in Louisiana. The scope of work encompasses electrical corrections to replace corroded disconnects, mechanical replacements for AHU and CU units, and civil repairs including grading and gravel addition. Additionally, the project requires structural reinforcement of concrete cracks and architectural improvements such as sandblasting, painting, and the replacement of plywood walls and gypsum ceiling panels. The estimated construction value for this project is between 500,000 and 1,000,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236210. Interested parties must submit their responses by November 1, 2026.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-0174 OWB ATCT Public Announcement

Solicitation # amc-0174-owb-atct-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive facility renovation project located in Kentucky with an estimated construction value between 500,000 and 1,000,000 dollars. The scope of work is multidisciplinary, encompassing electrical upgrades such as rerouting down conductors and conducting arc flash studies, as well as mechanical replacements of rooftop and condensing units. Roof improvements include the installation of EPDM membranes on the CAB and shaft, along with new cables and scuppers. Architectural requirements focus on interior and exterior restoration, including painting, patching walls, replacing ceiling tiles and lighting, and repairing rust. Additional tasks include replacing emergency lights, handrails, door frames, and hardware, as well as caulking CAB glass. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB, with a response deadline of March 21, 2027.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

IE181 - WHS Greenhouse Construction

Solicitation # 140A2327Q0297

Solicitation 140A2327Q0297 is a fixed-price contract set aside exclusively for Indian Small Business Economic Enterprises (ISBEE) to install a greenhouse at Wingate High School in Fort Wingate, New Mexico. The project, estimated between $100,000 and $250,000, involves a comprehensive scope of work including foundation construction, utility connections, glazing, environmental controls, and heating. The contractor must complete the installation within 120 calendar days from the Notice to Proceed, which is contingent upon the successful background investigation of on-site personnel. Required qualifications include New Mexico contractor licensure for general building, electrical, and mechanical/gas work, as well as any necessary Navajo Nation tribal business licenses. Award will be made using the Lowest Price Technically Acceptable (LPTA) method to a responsible offeror who meets all technical requirements, including the submission of a project-specific Quality Control Plan and a detailed progress schedule. Bids exceeding $35,000 require a bid bond. Offerors must be registered in SAM.gov and provide a signed quote, UEI number, and specific Indian Economic Enterprise representations. The project must adhere to strict safety and quality standards, including OSHA, NEC, IBC, and ASTM specifications, and comply with the Davis-Bacon Act for wage requirements. All quotes are due to the Bureau of Indian Education by November 19, 2026, at 12:00 PM MDT.

Indian Education Acquisition Office

POSTED

DEADLINE

ESPH AB RDC Sidley Depot (ESPH753)

Solicitation # ESPH753

Rother District Council is seeking a qualified main contractor for the design and construction of a new four-bay steel portal frame workshop and associated facilities at the Sidley Depot in Bexhill-on-Sea. The project, identified as ESPH753, is valued at 1,610,400 GBP including VAT and is estimated to run from January 26, 2027, to July 30, 2027. The facility will support the Biffa-operated waste collection fleet under the Joint Waste Partnership. A critical requirement of this contract is the maintenance of continuous operational use of the site. The contractor must ensure that the statutory waste services are not interrupted and must coordinate shared access on Elva Way with Biffa vehicles. The evaluation process follows a three-stage approach, beginning with a pass/fail assessment of participation conditions, followed by a weighted evaluation of price at 60 percent and quality at 40 percent, and concluding with a final verification of the preferred bidder. Tenders must be submitted electronically via the East Sussex Procurement Hub portal by December 7, 2026.

Rother District Council

POSTED

DEADLINE

Building 215 Clean Room HEPA Filter Replacement

Solicitation # RFI-195000-26-00181

The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.

Department Of Commerce Nist

POSTED

DEADLINE

Sources Sought - POST TEST LITHIUM BATTERY STORAGE

Solicitation # N00167-27-RFPREQ-CD-102-0002

The Naval Sea Systems Command Naval Surface Warfare Center Carderock Division is conducting a sources sought effort for the construction of a Post-Test Lithium Battery Storage Facility in West Bethesda, Maryland. This project, classified under NAICS code 236210 for Industrial Building Construction, involves the creation of a storage area featuring a non-flammable single-pitch sloped roof, a perimeter fence with a gate, 3-hour rated firewalls, and concrete walls for large battery storage. Additional requirements include low-voltage outlets, pole-mounted LED flood lighting, and a dedicated forklift access road. The effort must be completed within 210 days of the award and adhere to Unified Facilities Guide Specifications and other stringent technical criteria. This notice is not a request for proposal, and no award will be made directly from this notice. Interested small and large businesses must submit a capability statement and a Rough Order of Magnitude by 1700 EST on 18 November 2026 to Heather Valiga. The government will use these responses to determine the future acquisition strategy. Because the project is located on a secure military installation, all personnel must obtain proper clearances and credentials. Key deliverables include an Activity Hazard Analysis and a detailed schedule due within five days of the pre-construction meeting, as well as a personnel list provided seven days before the start date.

POSTED

DEADLINE

The Port of Lake Charles in Louisiana is seeking proposals for the Bulk Terminal No. 1 Junction House Rehabilitation project, identified as solicitation number 49601 under contract CP25008. This SLED organization project focuses on the rehabilitation of critical infrastructure within the port's bulk terminal facilities located in Louisiana. Interested parties must submit their responses by the deadline of November 19, 2026, at 4:00 PM. The solicitation was officially posted on October 16, 2026, and further details regarding the bidding process can be accessed through the Bid Express platform.

POSTED

DEADLINE

Compressor / M&R Station ConstructionThis subcontract involves the construction of compressor and Metering and Regulating stations for prime contractors working on Sacramento County RNG projects. The scope of work includes building facilities up to 25,000 square feet, which encompasses the installation of compressors, mechanical and electrical equipment, noise-suppressing enclosures, and specialized gas regulation equipment and electrical panels. Additionally, the contractor is responsible for ensuring vehicle access and delivering a fully functional station integrated into the pipeline network. The project is located in California within the 95683 zip code area and falls under NAICS code 236210. It is associated with Sacramento County and was posted on October 16, 2026.

POSTED

DEADLINE

Natural Gas Pipeline InstallationThis subcontract for Sacramento County involves the installation of high-pressure steel natural gas pipelines as part of regional RNG projects. The scope of work requires the installation of approximately 2.2 miles of 12-inch diameter steel pipeline, which will be buried underground within private easements and public rights-of-way. The project includes the critical task of connecting the new infrastructure to existing PG&E transmission and distribution pipelines. The selected contractor will be responsible for providing all necessary trenching and steel pipe welding equipment to deliver a fully installed and connected system. This project falls under NAICS code 236210 and is centered in the 95683 zip code area of California.

Sacramento County

POSTED

5 days ago

DEADLINE

N/A

General Info

Agency

Department Of Commerce Nist

Contract Value

$4,310,000

NAICS

236210 - Industrial Building Construction

Place of Performance

Water Generation Plant at the NIST 100 Bureau Drive, GAITHERSBURG, MD, 20899, USA

Set-Aside

NONE

Awardee

Native Sons, Ltd. 2306 N. Rolling Road, Suite 310 WINDSOR MILL MD 21244 USA

Award Issued Date

05/23/2013, 12:00:00 AM UTC

Documents

Boiler #1-Burner and Windbox

specifications

High

Boiler #1 Fuel Train Technical Image

specifications

High

Boiler Feedwater Circulation - Mezzanine Deck

specifications

High

Existing Combustion Air Fan Diagram

specifications

High

FAR 52.228-1 Bid Guarantee

1 page · specifications

High

General Decision Number MD130057

8 pages · wage-determination

High

General Decision Number MD130057 - Montgomery County, MD

7 pages · wage-determination

High

NIST Guidelines for Contractors & A-E Firms (July 2012)

11 pages · specifications

High

NIST Safety Instructions (April 2011)

28 pages · specifications

High

Project WO #1952870-2743-195 - Section 230900 Instrumentation and Controls

specifications

High

SB1341-13-RP-0022 Amendment 004

amendment

High

SB1341-13-RP-0022 Amendment 005 Bid Questions

3 pages · q-and-a

High

SB1341-13-RP-0022 Amendment A01

amendment

High

SB1341-13-RP-0022 Amendment Bid Questions

4 pages · q-and-a

High

SB1341-13-RP-0022 - NIST Boiler Burner Replacement

rfp

High

SBI341-13-RP-0022 Amendment 005

amendment

High

Section 230900A - Controllers and Networks

7 pages · specifications

High

SITE VISIT pic 17 - Motor Control Center

specifications

High

Boiler #1 Exhaust Stack and Unit Heater

specifications

Low

Boiler 2 Control Panel Manual

specifications

Low

Boiler #2 Stack and Roof Frame Photo

specifications

Low

Boiler #3 Firebox Interior Photo

specifications

Low

Boiler #3 Firebox Interior Photo

other

Low

Boiler #3 Stack Site Visit Photo

specifications

Low

NIST Badge Application Form

other

Low

NIST Form 1260 - Report of Foreign Visitor(s), Guest(s), Conference Attendee(s)

other

Low

SB1341-13-RP-0022 Pre-Proposal Conference Minutes

q-and-a

Low

Site Visit Image - Feedwater Distribution Pipe

specifications

Low

Site Visit Photo - Boiler #1 Stack and Roof Frame

other

Low

Site Visit Photo - Boiler Feedwater Loop

other

Low

Site Visit Photo - Boiler Room Interior

other

Low

SITE VISIT PIC 12 - Boilers 1-4

other

Low

SITE VISIT PIC 7 - Boiler #3 Feedwater Pipe

specifications

Low

Site Visit - Room 102 High Voltage Switchgear Room

other

Low

DWG%27s_Zip_01.zip

DWG%27s_zip_02.zip

DWG%27s_zip_03.zip

DWG%27s_zip_04.zip

DWG%27s_zip_05.zip

Spec_pdf.zip

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseAwarded

PostedDec 21

Presolicitation

Type ChangedJan 22

Presolicitation → Combined Synopsis

Notice updatedFeb 13

The notice description changed.

Notice updatedFeb 13

Notice details unchanged. Attachments may have changed.

Notice updatedFeb 13

Notice details unchanged. Attachments may have changed.

Notice updatedFeb 15

Notice details unchanged. Attachments may have changed.

Notice updatedFeb 20

Notice details unchanged. Attachments may have changed.

AwardedMay 23

Contract was awarded

Submission Closed

05/23/2013, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce Nist

Contacts2 people available

OfficeGAITHERSBURG, MD, 20899, USA

Organization / AgencyDepartment Of Commerce Nist

Office AddressGAITHERSBURG, MD, 20899, USA

Contacts

Brian K. JohnsonContracting Officer

contact@example.gov

+1 (555) 000-0000

Donald CollieContracting officer

contact@example.gov

+1 (555) 000-0000

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 334511

Federal

Optional Leak Check System SupplyThis contract involves the supply of an optional high-sensitivity leak detection system designed to verify the hermetic seal integrity within a microfluidic TEM cell. The primary focus is to provide a reliable solution that ensures the cells remain sealed, which is crucial for maintaining the integrity and performance of these specialized devices. The contract is classified under NAICS code 334511, indicating its association with electromedical and electrotherapeutic apparatus manufacturing. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and is to be performed in Gaithersburg, Maryland, with the ZIP code 20899. Although specific solicitation details and set-aside statuses are not provided, the project emphasizes precision and quality in leak detection technology to support advanced microfluidic applications. This system will likely enhance the reliability and accuracy of microfluidic experiments or operations conducted using the TEM cell.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Installation and Training ServicesThe contract involves the on-site installation of a Transmission Electron Microscope (TEM) holder at the National Institute of Standards and Technology (NIST) facility located in Gaithersburg. Along with the installation, the contractor is responsible for providing comprehensive operator training to ensure proper use and maintenance of the equipment. This subcontract, classified under NAICS code 541330, supports specialized professional services related to the setup and operational readiness of high-precision scientific instruments. Issued by the Department of Commerce, NIST, the contract ensures that the TEM holder is installed at the specified Gaithersburg location, with a focus on delivering both technical installation and in-depth training. This dual service approach is designed to enhance user proficiency and optimize the performance of the equipment, supporting NIST’s mission of advancing measurement science. The contract was posted in May 2026 and is accessible through the System for Award Management (SAM) platform.

POSTED

DEADLINE

Real-Time Sample Correction Software DevelopmentThe contract involves the development and integration of specialized software designed to provide real-time correction for sample drift during Transmission Electron Microscopy (TEM) imaging, thereby ensuring imaging stability. This work is categorized under the NAICS code 541512, which relates to computer systems design services. The contract is a subcontract issued by the Department of Commerce, specifically through the National Institute of Standards and Technology (NIST). The project is set to be performed in Gaithersburg, with a focus on enhancing the precision and reliability of TEM imaging by addressing sample drift issues in real time. While specific financial or timeline details are not provided, the contract aims to support advanced scientific research through improved imaging software, reflecting the Department of Commerce's commitment to technological innovation in measurement and standards.

Computer Systems Design Services

POSTED

DEADLINE

Integrated Fluid Delivery System SupplyThis contract entails the supply of an integrated fluid delivery system designed for precise fluid management during transmission electron microscopy (TEM) experiments. The system enables in-situ solution exchange and degassing, which are critical for maintaining experimental accuracy and fluid integrity under the microscope. The contract is classified under the NAICS code 333992, indicating its focus on fluid power valve and hose fitting manufacturing, emphasizing the technical specificity required. The subcontract is issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and calls for performance in Gaithersburg, Maryland, ZIP code 20899. Specific details such as the solicitation number or set-aside type were not indicated. This procurement reflects the agency’s commitment to advancing experimental capabilities in scientific research by integrating sophisticated fluid handling systems directly into microscopy workflows.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Electrochemical Liquid TEM Holder SupplyThe contract entails the supply of a specialized electrochemical liquid transmission electron microscopy (TEM) holder designed to facilitate operando imaging of material dynamics. This advanced TEM holder incorporates integrated heating and cooling functionalities, enabling precise temperature control during imaging processes. The equipment is intended to support detailed analysis of material behaviors under electrochemical conditions in real time. Issued by the Department of Commerce’s National Institute of Standards and Technology (NIST), the subcontract falls under the NAICS code 334516, which pertains to analytical laboratory instrument manufacturing. The performance location is specified as Gaithersburg, with a ZIP code of 20899. The contract was posted on May 20, 2026, and although some logistical details such as solicitation number and point of contact are not provided, the primary goal is the procurement of this customized TEM holder to enhance research capabilities in material science.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Handling and Packaging of Micro SpecimensThis contract involves the development of specialized protocols for the safe handling, storage, and shipping of fragile micro specimens. The work focuses on creating custom fixtures designed to securely hold these delicate items, alongside implementing environmental protection measures to ensure their integrity during transportation and storage. The objective is to mitigate risks associated with damage caused by improper handling or adverse conditions. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. It falls under the NAICS code 488490, which pertains to specialized freight trucking services. The project was posted on May 6, 2026, and aims to enhance precision in the packaging and transportation of micro-scale specimens, ensuring they reach their destinations safely and remain viable for their intended scientific use.

Other Support Activities for Road Transportation

POSTED

DEADLINE

Materials Characterization and Quality Validation ServicesThis contract involves the independent verification of micro specimen properties, focusing on microstructure, composition, and mechanical behavior analysis. The services include comprehensive reporting and ensuring traceability throughout the verification process. It is classified under subcontracting and pertains to materials characterization and quality validation, intended to support high standards in material assessment. The contract falls under the NAICS code 541380, aligning with testing laboratories and related services. It is administered by the Department of Commerce's National Institute of Standards and Technology (NIST) and performed in Gaithersburg, Maryland, ZIP code 20899. The work is designed to enhance the accuracy and reliability of material property data, which is critical for subsequent research and development initiatives or quality assurance in manufacturing processes.

Testing Laboratories and Services

POSTED

DEADLINE

Micro-Sized Lead-Free Solder Specimen FabricationThe contract involves the fabrication of micro-sized lead-free solder specimens specifically designed for fracture testing in advanced packaging applications. The focus is on producing specimens with precisely controlled composition and microstructure to meet the requirements for evaluating the mechanical performance of solder materials in microelectronics. This work is crucial for advancing reliable lead-free solder technologies that comply with environmental regulations and enhance device durability. Issued by the Department of Commerce's National Institute of Standards and Technology (NIST), the subcontract aims to support research and development efforts within the advanced packaging industry. The place of performance is Gaithersburg, Maryland, highlighting a location known for its concentration of scientific research. The contract aligns with NAICS code 334419, which pertains to other electronic component manufacturing, indicating that this effort supports manufacturing-related innovation.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Microfabrication of Electroplated Copper Micro SpecimensThis contract involves the design and fabrication of free-standing micro-scale copper specimens with highly controlled geometry, microstructure, and grain size to closely mimic semiconductor interconnects for mechanical testing purposes. The work requires precision microfabrication techniques, focusing on electroplated copper to replicate the physical and material properties of actual semiconductor components used in reliability assessments. The ultimate goal is to provide accurate test specimens that can aid in advancing the understanding of mechanical behavior in microelectronic materials. The subcontract is issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. The solicitation aligns with NAICS code 334418, indicating a focus on electronic instrument manufacturing. This effort supports the development of standardized testing methodologies by ensuring that specimens closely replicate real-world interconnect conditions at the micro-scale level.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Building Automation and Controls EngineeringThis contract involves providing engineering design and integration services focused on building automation, controls, and energy management systems tailored for laboratory and office settings. It is a subcontract opportunity under a Total Small Business Set-Aside program, aligned with NAICS code 541330, which covers engineering services. The contract is associated with the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), and the work will be performed in Gaithersburg, Maryland, ZIP code 20899. The primary objective is to support NIST by delivering expert services that enhance building system efficiency and integration in controlled environments such as labs and offices. This contract emphasizes small business participation and aims to leverage specialized engineering expertise to improve automation and energy management in government facilities.

POSTED

DEADLINE

Elevator Modernization EngineeringThe contract involves providing engineering services for the modernization and upgrade of elevator systems within NIST facilities, focusing on design, specifications, and ensuring compliance with relevant accessibility and safety standards. It is a subcontract opportunity under a Total Small Business Set-Aside, adhering to FAR 19.5 regulations, specifically falling under NAICS code 541330, which covers engineering services. The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is the contracting agency, with the work to be performed in Gaithersburg, Maryland (zip code 20899). The contract aims to enhance the reliability, safety, and accessibility of elevator systems at the facilities, aligning with federal standards and requirements.

POSTED

DEADLINE

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS