Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

N--Replacement Walk-in Freezer System, Parts and Inst

Active
1305M326Q0471Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Commerce, through the National Oceanic and Atmospheric Administration (NOAA), has issued solicitation 1305M326Q0471 for the Replacement Walk-in Freezer System, Parts and Installation Project. This project is located at the Northeast Fisheries Science Center in East Falmouth, Massachusetts, and is designated as a Total Small Business Set-Aside under NAICS code 333415. The scope of work involves the removal of an existing freezer system and the delivery, installation, and integration of a new, fully operational walk-in freezer unit to support facility infrastructure modernization and operational continuity. Proposals must be submitted electronically to Jenna Taulman at jenna.taulman@noaa.gov by the deadline of August 26, 2026. A critical requirement for submission is the inclusion of completed Sections I and II of the Past Performance Questionnaire (PPQ), with original copies provided to the designated assessor. The evaluation process will utilize standardized adjectival ratings for past performance, ranging from Exceptional to Unsatisfactory. While the administrative contracting office is located in Seattle, Washington, the place of performance and inspection is East Falmouth, Massachusetts. Specific details regarding contract value, contract type, and exact period of performance are not provided in the current solicitation documentation.

General Info

NOAA seeks small business contractors to replace a walk-in freezer in East Falmouth.

Agency

Department Of Commerce NoaaView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

25 Bernard Saint Jean Drive, East Falmouth, MA, 02536, USA

Set-Aside

SBA

Documents

(6)

Sol_1305M326Q0471.pdf

PDF

Davis-Bacon_Act_WD___MA20260001_Mod_1_dated_18May2026.pdf

PDF

Attachment_1_-_PWS_Revised_1305M326Q0471_0001.pdf

PDF

Sol_1305M326Q0471_Amd_0001.pdf

PDF

Attachment_1_-_PWS_Falmouth__MA_Replacement_Walk-in_Freezer_System__Parts_and_Installation_Project.pdf

PDF

Attachment_2_-_Past_Performance_Questionnaire_1305M326Q0471_Falmouth_Freezer.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Noaa
Contacts1 person available
OfficeSEATTLE, WA, 98115, USA
Organization / Agency
Department Of Commerce Noaa
View Agency Profile
Office AddressSEATTLE, WA, 98115, USA
Contacts
TAULMAN JENNA L

Full Description

Show more
East Falmouth, MA Replacement Walk-in Freezer System, Parts and Installation Project Amendment 0001

Similar Contracts

Same NAICS industry code

NAICS: 333415
New
DIBBS
COOLER, LUBRICATING
Solicitation # SPE7LX-26-R-X024
This contract establishes a Firm-Fixed Price, Long-Term Indefinite Delivery Contract for the procuring of Cooler, Lubricating, identified by NSN 2930-01-168-7911, under FAR 12 simplified procedures, with a three-year base period and one optional two-year extension, allowing for a potential five-year duration with annual price adjustments. The acquisition supports DLA stock operations within the continental United States and is restricted to approved sources due to the Government’s lack of complete, unrestrictive technical data, as permitted under 10 U.S.C. 3204(a)(1). Delivery is FOB Origin with inspection and acceptance occurring at the point of origin, and the solicitation will be issued via DIBBS on or about August 21, 2026, with offers due by September 22, 2026. While price is a major consideration, award will be based on a combination of price, delivery performance, past performance, and other criteria outlined in the solicitation. The contracting opportunity is unrestricted, and the small business size standard is 1,500 employees. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted; vendors must register for and comply with DLA’s Joint Certification Program to gain access to required engineering documents through cFolders or DIBBS. Vendors unable to access technical data must submit a one-time request to jcpvalidation@dla.mil, with approval processed on a first-come-first-served basis and no guarantee of completion before the response deadline. All offers must be submitted in English and in U.S. dollars, and may be subject to the Trade Agreements Act of 1979. Relevant specifications and standards can be obtained via the ASSIST database or DODSSP. The contracting office is located in Columbus, Ohio, with primary point of contact Jeremy Feeney and secondary contact Xiomara Seda-Vargas, and the solicitation number is SPE7LX-26-R-X024. Annual demand for the item is 564 units, each unit being one cooler.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Commerce Noaa

Same awarding agency

NAICS: 237990
New
Federal
Y--NOAA/USCG Cutter STORIS Homeporting Project
Solicitation # 1305M226R0012
The Department of Commerce, through NOAA’s Office of Marine and Aviation Operations, is preparing to solicit a Design-Build contract for the USCGC STORIS Homeporting Project at USCG Station Juneau, Alaska, to modernize waterfront infrastructure in support of homeporting the cutter and accommodating other Coast Guard vessel classes. The project involves comprehensive integrated design services including geotechnical, bathymetric, and environmental investigations, along with full federal, state, and local permitting. Work includes demolition of existing marine and upland structures, construction of a permanent fixed wharf designed for a 50-year service life, a two-berth floating pier capable of handling NSC and OPC class cutters, and articulated utility and access gangways engineered for Juneau’s extreme tidal fluctuations. The infrastructure will feature energy-absorbing fenders and mooring hardware rated for 100 MPH Taku wind loads, cathodic protection for submerged elements, and a net increase of 6,400 amps of electrical service with fire-flow water capacity from public mains. On-site utility systems will include potable water, sanitary sewer, marine fire protection, transformers, switchgear, and cabling, supported by a dedicated backup generator for mission-critical loads. Site enhancements will incorporate marine-rated lighting, CCTV, access control, IT and communications pathways, grading, drainage, pavements, curbs, sidewalks, and fencing. Optional scope includes a floating small boat facility and structural, MEP, and IT upgrades to three existing shore-side buildings. The estimated performance period is 1,086 calendar days, with performance taking place at 345 Egan Drive, Juneau, AK 99801. The solicitation will be issued as a full and open competition under NAICS code 237990, using best value trade-off selection with a two-phase advisory down-selection process. All prospective offerors must be registered in SAM.gov and are responsible for regularly checking the website for amendments, clarifications, and the official solicitation package, which is anticipated for release on or about July 20, 2026. Proposals must be submitted electronically via SAM.gov by 2:00 PM Eastern Standard Time on August 5, 2026; paper, fax, or email submissions will not be accepted. A site visit is tentatively scheduled for July 29, 2026, at the project location.
Other Heavy and Civil Engineering Construction

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238990
New
Federal
Y--Lean-to Covered Work Pavilion
Solicitation # 1305M226Q0245
This solicitation, issued by the Department of Commerce NOAA under solicitation number 1305M226Q0245, is a small business set-aside for construction services at the NOAA Tides and Currents Facility in Gulf Breeze, Florida. The project involves the construction of a lean-to covered work pavilion and truck loading shelter that will be attached to an existing building. Key technical requirements include pouring concrete, installing a structure with a minimum 28-foot extension, ensuring hurricane-force wind resistance, and providing weather-resistant materials and electrical provisions. The contractor is responsible for adhering to all applicable federal, state, and local codes, including compliance with Davis-Bacon Act wage rates. The period of performance is set for 180 days from the date of award. Interested quoters must submit their responses electronically by the deadline of August 31, 2026. Evaluation of quotes will be based on technical acceptability, price, and past performance. To demonstrate capability, respondents are required to submit a Past Performance Information Form detailing up to three relevant contracts performed within the last three years that match the scope, magnitude, and complexity of this project. While a site visit is recommended to understand the project requirements, it is not mandatory.
All Other Specialty Trade Contractors

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
Federal
NWS Southern Region WFO Emergency Power Generator Replacement (Multiple Sites)
Solicitation # 1305M426Q0048
The National Weather Service's Southern Region is seeking to replace 14 existing emergency power generators at Weather Forecast Offices across 14 locations including Brownsville, Corpus Christi, Jacksonville, Key West, Lake Charles, Slidell, Little Rock, Melbourne, Mobile, Nashville, San Juan, Tampa, Birmingham, and Atlanta. The new generators will be Kohler models rated for 277/480-volt 3-phase operation with capacities between 125 and 150 kVA to ensure reliable backup power during outages. The contract includes optional scopes of work: refurbishing or replacing fuel tanks, upgrading electrical panels, and performing necessary building repairs to support the new systems. The solicitation is designated as a Small Business Set Aside with no portion reserved for other categories, meaning only small businesses are eligible to compete. The North American Industry Classification System code is 335999, aligning with miscellaneous electrical equipment manufacturing. The request is posted under solicitation number 1305M426Q0048 with a response deadline of September 4, 2026, and was published on August 5, 2026. The contracting office is located in Silver Spring, Maryland, under the Department of Commerce, National Oceanic and Atmospheric Administration. Interested parties must submit proposals through the SAM.gov portal by the specified deadline. Primary points of contact for inquiries include Noelle Albert and Paul Tucker, who can be reached via their official NOAA email addresses. All work must be performed at the listed field office locations, and successful bidders will be responsible for coordinating logistics, installation, and compliance with federal procurement standards.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 238310
New
Federal
Z--Replacing Wall & Roof Insulation at NEXRAD sites
Solicitation # 1305M326Q0442
Solicitation 1305M326Q0442 is a Request for Quotations issued by the Department of Commerce NOAA for commercial construction services to replace wall and roof insulation at four Next Generation Radar (NEXRAD) sites located in Reno, NV; Flagstaff, AZ; Elko, NV; and Cedar City, UT. The project involves the removal of old, damaged insulation and the installation of new R-19 or equivalent insulation, such as closed-cell spray foam, across an estimated 10,000 square feet per site (approximately 2,200 square feet of roof/ceiling and 7,800 square feet of walls). The period of performance is 365 calendar days following the notice to proceed. This is a total small business set-aside, and the government intends to award a single, firm-fixed-price purchase order on an all-or-none basis using a trade-off evaluation process. The evaluation will prioritize a non-price technical solution, including the contractor's technical approach, experience, and past performance, which are considered significantly more important than price. Offerors must provide a detailed technical write-up, evidence of similar experience, and at least two references from relevant contracts performed within the last two years. A mandatory Asbestos-Containing Materials Certification must be included in all quotes. Contractors are responsible for verifying all site measurements and must comply with various federal regulations, including the Copeland Act, construction wage rate requirements, and domestic preference for construction materials. Payment is to be processed electronically through the Invoice Processing Platform (IPP), and the contractor must provide either a payment bond or an irrevocable letter of credit as protection.
Drywall and Insulation Contractors

POSTED

4 days ago

DEADLINE

in 1 day
View Details