Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on June 16, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

REQUEST FOR INFORMATION (RFI)/SOURCES SOUGHT - Ammunition to be used in Counter-UAS Applications

Closed
N0016420SNB63Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

5 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 2 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

20 days ago

DEADLINE

in about 2 months

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

IN

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Office AddressCRANE, IN, 47522-5001, USA
Contacts

Full Description

Show more
N0016420SNB63 - REQUEST FOR INFORMATION (RFI)/SOURCES SOUGHT - Ammunition to be used in Counter-UAS Applications FSC - 1395 - NAICS - 332993 Issue Date: 16 JUNE 2020 - Closing Date: 07 JULY 2020 The Naval Surface Warfare Center (NSWC), Crane, IN is issuing this RFI/sources sought announcement as part of market research in accordance with FAR 15.201(e.) and FAR 10.001(a)(3)(i) to determine if sources have 40mm grenades (any variant) for use in counter unmanned aerial system that has low collateral damage and limited range (collateral damage measured inside the surface danger zone of typical M855 cartridge (maximum range 3,600 meters) or has the capability to program the range into the munition). This is a second request for responses. If a response was provided to the previous RFI/Sources Sought, N0016420SNB58, do not resubmit the response. The type of technologies NSWC Crane is looking for, but not limited too, are: Airbursting Short Range or Reduce Range Ammunition Shotshell, either as the projectiles or as fragments Ammunition using nets as the payload High Fragmenting Ammunition Ammunition using explosive powder payloads Size limitations - NSWC Crane is looking for only 40mm grenade ammunition. At a minimum, the following information needs to be addressed in response to the RFI: Description of the cartridge Cartridge construction List of energetics Nominal overall dimensions Cutaways and pictures of munition, if applicable Dispersion data, if applicable Basic Projectile Dimensions (i.e. weight, length, diameter) Any pertinent testing data showing projectile's ability, if applicable i.e. simulated or tested maximum range data If the munition is programmable, discuss how it works or functionality. Type of Fire Control required or any other equipment needed to use the round. If the unit has a fuze, describe how the fuze functions and main components (cutaways would be beneficial) If you are working with another DOD entity on this type of application State who that group is Provide a POC Budgetary cost estimate for: Ammunition Fire Control, if applicable Lead time/delivery schedule Availability Responses to the Market Survey shall include the following: Submitter's name Mailing address (Street address, City, State, Zip code) Business Size and category (large, small, small disadvantaged, etc.) Website address (if applicable) DUNS number Cage code, and/or Tax ID number Government representative(s) Point of Contract (POC) POC Telephone and email address Announcement Number: N0016420SNB63 Responses shall be submitted in the following format: Electronic (Adobe pdf or Microsoft Word) format Not exceed ten pages in length In 11 or 12-point, Times New Roman with normal (condensed) spacing Margins of 1 or greater on all sides Submitted via email Responses shall NOT be submitted using marketing materials. All information received that includes proprietary markings will be handled in accordance with applicable statutes and regulations. Responses to this notice will not be returned. An acknowledgement of receipt will be provided for all responses received. If you do not receive an acknowledgement within two (2) working days, please notify the points of contact listed in this notice. At the current time, NO FUNDING IS AVAILABLE for contractual efforts. This notice is not a Request for Proposals. Reponses to this notice are not offers and cannot be accepted by the Government to form a binding contract. This notice is issued solely for information and planning purposes and does not constitute a solicitation or obligation on the part of the Government. Neither unsolicited proposals nor any other kind of offers will be considered in response to this notice. Respondents are wholly responsible for any costs or expenses associated with submitting a response. No reimbursement will be made for any costs associated with providing information in response to this notice or any further requests for information relating to a response. Respondents will not be notified of the results of this notice. The information obtained from submitted responses may be used in the development of an acquisition strategy. Contractors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. Information shall be submitted to NSWC Crane Contracting POC, Leslie Graber-Heshelman, Email: Leslie.Graberheshelm@navy.mil. Mailing address is Commander, NAVSURFWARCENDIV Crane, Code 0232, Bldg 3373, Attn: Leslie Graber-Heshelman, 300 Highway 361 Crane, IN 47522-5000. It is preferred that information be submitted electronically. Reference N0016420SNB63 in the subject line of emails. Any questions related to the process for submission of information shall be submitted to the NSWC Crane Contracting POC by 23 JUNE 2020. Submissions in response to this sources sought announcement shall be submitted to the NSWC Crane Contracting POC by 07 JULY 2020. Your interest in the response is appreciated. Reference announcement number N0016420SNB63 in all correspondence and communications.

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 811310
New
Federal
EVALUATION/REPAIRS
Solicitation # N00016427Q0006
Solicitation N00164-27-Q-0006 is a sole source, firm fixed price procurement issued by the Naval Surface Warfare Center Crane Division for engineering services to support five AN/SLQ-32(V)4 G4DSP-XD3 multiprocessor cards. The primary objective is to perform evaluation diagnostics, failure analysis, and data extraction on non-working processing units to determine if they are repairable or beyond economic repair. Key technical requirements include salvaging Northrop Grumman running scripts and operational binary scripts from non-volatile memory, as well as mapping hardcoded IP schemes and network connection profiles. The government intends to negotiate exclusively with Abaco Systems due to the items being peculiar to one manufacturer, although other responsible sources may submit capability statements for consideration. The contract requires strict adherence to MIL-STD-129 for shipping and marking, NIST SP 800-88 Rev. 1 for media sanitization, and DoDI 8582.01 for the security of non-DoD information systems. Contractors must be registered in the System for Award Management and comply with Cybersecurity Maturity Model Certification (CMMC) requirements under DFARS 252.204-7021. Deliverables include software test reports, computer software products, and system security plans. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system. Offers are due by 4:00 PM Eastern Time on October 26, 2026, and should be submitted electronically to the primary point of contact, Trista Ray.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS