Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Rescue Intellitech Solo Rescue SCBA Decon Washer

Open
IFB 27-420State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Tulsa is soliciting bids for a one-year annual contract to provide a Rescue Intellitech Solo Rescue SCBA Decon Washer for the City of Tulsa Fire Department. The required equipment must be a single-phase 208/240 40amp unit featuring a heavy-duty basket for two SCBAs, holders for two large air cylinders, two gear holders for boots, gloves, and helmets, a metered dosing pump, and ProBlend Detergent. Technical specifications require a 400 V / 415 V 3-Phase, 50 Hz power supply with specific wash programs of 3 minutes for gloves and boots and 8 minutes for SCBAs, face masks, and helmets. The contract will be awarded to the lowest secure bidder based on price and specifications, with additional consideration given to bidder history, delivery time, maintenance requirements, and performance data. Bidders must submit two sealed copies of their bid, including an original and a copy, with the legal name and bid number clearly labeled. All deliveries must be F.O.B. to Tulsa, Oklahoma, with the seller responsible for all unloading of items exceeding 500 lbs. The City reserves the right to require a performance demonstration of the equipment within 30 days of the bid date to verify safety and technical specifications prior to the award. Payment is issued net 30 days after the receipt of a fully itemized invoice submitted to the designated city email.

General Info

Tulsa seeks bids for a one-year SCBA decontamination washer for its fire department.

Place of Performance

Not specified

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstifb
High

Read the document

Due in 19 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 19 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyOklahoma → City of Tulsa
ContactsNo contacts available
OfficeN/A
Organization / AgencyOklahoma → City of Tulsa
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Rescue Intellitech Solo Rescue SCBA Decon Washer

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
Federal
Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO
Solicitation # W519TC26ACSO
The Army Contracting Command - Rock Island is seeking qualified vendors for the Automated Fluidized Bed Mixer Facility Modernization at Pine Bluff Arsenal through a Commercial Solution Opportunity (CSO). This effort aims to modernize colored smoke energetics production by procuring an automated, high-precision mixing, granulation, and drying system. The project utilizes a streamlined acquisition process under DFARS 212.70 and Part 12 Commercial Item Procedures, allowing for both traditional and non-traditional defense contractors to compete for a Firm-Fixed-Price contract. There is no set-aside used for this solicitation. The procurement follows a three-phase selection process: a Phase 1 Solution Brief (limited to a 5-page paper or 15-slide deck), a Phase 2 Pitch presentation, and a Phase 3 Full Quote. Technical requirements include a system with 800-1200 lb capacity, 95% operational availability, and 95% batch-to-batch repeatability, with dosing accuracy within ±1.5%. Equipment must be rated for Class II Div 1 F and G hazardous environments and include a high-speed fire detection and suppression system with a response time of 500ms or faster. Evaluation is based on technical merit, innovation, importance to agency programs, financial feasibility, and the overall value provided to the arsenal.
W6QK Acc-Ri

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333248
New
Federal
Intent to Award Sole Source-SPARE PARTS
Solicitation # 2031ZA27N00008
The Bureau of Engraving and Printing (BEP) Office of the Chief Procurement Officer intends to award a sole-source, firm-fixed-price contract to Buhler Inc. for proprietary spare parts used on the Three-Mill SDVE 1300. The required components include a heat exchanger with fastening bracket (P/N UNS-46481-036), a pressure-reducing unit passage 1 (P/N SDVE-83048-810), and a left spur gear Z=98 (P/N SFL-20095-190). This procurement is conducted under NAICS code 333248 for All Other Industrial Machinery Manufacturing and is justified under FAR Subpart 6.302-1(a)(2)(ii), as Buhler Inc. is identified as the only responsible source capable of satisfying the agency's requirements. This opportunity is designated as a Small Business Set Aside - Total. The contract mandates strict adherence to BEP logistics and invoicing protocols. Deliveries are accepted at the Washington, D.C. Annex Building, the Landover Warehouse in Maryland, and the Western Currency Facility in Fort Worth, Texas, with specific scheduling and labeling requirements for each location. All payment requests must be submitted electronically via the Invoice Processing Platform (IPP). Interested parties must be active in the System for Award Management (SAM) and submit capability statements to the designated points of contact no later than 12:00 PM EDT on November 30, 2026.
Office Of The Chief Procurement Officer

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333248
New
Federal
Resonant Acoustic Mixer (RAM) System Upgrade
Solicitation # N6893627R0004
The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, is seeking the acquisition of proprietary aftermarket equipment, hardware, and control systems for existing Resodyn LabRAM II, OmniRAM, and RAM 5 Resonant Acoustic Mixers. This effort is part of the DoN26 Capital Investment Program project for Continuous Acoustic Mixer Processing (CAMP), aimed at transitioning Continuous Acoustic Mixing from laboratory-scale to large-scale production of energetic materials. The scope of work includes the production, delivery, installation, testing, and training of Government personnel for various RAM system items, including mix vessels, control systems, vacuum and earth detection systems, and water heater/chiller units. The government intends to procure these requirements on a sole source basis from The Falcon Project, Ltd., in accordance with FAR 6.103-1. The contractor will be responsible for proper crating and packing for shipment to China Lake, CA, and must perform both pre-factory and on-site factory acceptance testing. Strict adherence to safety standards is required, including NAVSEA OP 5 and the China Lake Safety Manual, with specific requirements for hazardous area equipment to be crevice-free to prevent the accumulation of explosives. Additionally, a Cyber Maturity Model Certification (CMMC) Level 1 is anticipated, and all Controlled Unclassified Information (CUI) must be handled and encrypted according to DoDI 5200.48.
Naval Air Warfare Center

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 333248
New
Federal
Automated Digital Flatbed Cutting and Routing Equipment
Solicitation # FA487727QA028
The 355th Contracting Squadron is conducting market research to identify capable businesses for the procurement of two automated digital flatbed cutting and routing systems, specifically Colex Sharpcut Pro or equivalent. The requirement includes two distinct systems: System 1 must have a minimum active cutting area of 120 by 60 inches with automated board feeding and continuous-loading capability, and System 2 must have a minimum active cutting area of 80 by 124 inches. Both systems must feature motorized conveyor beds, vacuum hold-down, and capabilities for cutting, routing, creasing, and marking of rigid and flexible materials. Technical requirements include optical registration, table mapping, barcode-enabled job retrieval, and interoperable software and tooling to allow file transfers without material rework. The scope of work encompasses turnkey delivery F.O.B. Destination to Davis-Monthan AFB, Arizona, including installation, configuration, and three days of on-site operator training for each system. Vendors must provide at least one year of warranty for non-consumable parts and labor, along with one year of remote or telephone technical support. This effort is categorized under NAICS code 333248 and PSC 3610. There is no set aside used for this requirement. Interested businesses must submit a completed Vendor Capability Questionnaire and detailed product literature to the Contracting Officer by November 25, 2026, at 8:00 AM MST.
FA4877 355 Cons Pk

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333248
New
International
Selective Laser Sintering (SLS) 3D Printing System
Solicitation # 26-58097-B
The National Research Council Canada (NRC) is soliciting offers for a new, unused, commercially available Selective Laser Sintering (SLS) 3D Printing System to support solvent-free production and prototyping of battery materials at the Clean Energy Innovation Research Centre. This open tendering process is subject to the Policy on Reciprocal Procurement, meaning only Canadian suppliers are eligible. The contract will be awarded to the responsive bidder who meets all mandatory technical criteria and offers the lowest price. All deliverables, including the hardware, software, and at least 2 kg of compatible powder, must be received by January 29, 2027, at the delivery location in Mississauga, Ontario, under DAP Incoterms 2020. The required system must be a laser-based, open-materials SLS system compatible with Industry 4.0 principles, featuring a built-in laser protective enclosure, a minimum build volume of 100 mm x 100 mm x 100 mm, and a printing speed of 10 mm/h or higher. Mandatory technical requirements include a minimum printable wall thickness of 0.5 mm or less on the XY plane and the ability to use powdered feedstock with a mean particle size D50 from 1 µm to 100 µm. The successful contractor must provide on-site installation, six hours of training, and ten hours of technical support over one year. Bidders must adhere to environmentally preferable packaging standards and provide all necessary safety data sheets for materials. Offers must be submitted by November 30, 2026, and include separate technical, financial, and certification documents.
National Research Council of Canada

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Oklahoma → City of Tulsa

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS