Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESERVOIR, HYDRAULIC

Active
SPE4A5-26-T-327RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation is for one unit of a hydraulic reservoir, identified by NSN 4320-01-583-9049, under solicitation number SPE4A5-26-T-327R, with a response deadline of August 12, 2026. Delivery is required within 171 days of award, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA requirements, and tailored higher-level quality standards apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Physical identification of the item is required, but unique item identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Measuring and test equipment must meet specified adequacy standards. The contracting activity is the ASC Supplier Oper OEM Division under the Department of Defense, with Katelane Dillard listed as the primary point of contact.

General Info

Hydraulic reservoir NSN 4320-01-583-9049 due August 12, 2026, delivery to New Cumberland, PA, within 171 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-327R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Katelane Dillard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESERVOIR,HYDRAULIC
RESERVOIR,HYDRAULIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
ADEQUATE DATA FOR THE NSN/Part Number: 4320-01-583-9049 Quantity: 1 EA Purchase Request: 7017741613QTY: 1 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
LUBRICATING GUN, HAN
Solicitation # SPE8EE-26-T-2210
This contract is for the procurement of four lubricating guns, specifically the ALEMITE LLC DBA SKF USA INC. model 500-E, identified by NSN 4930-01-665-6928, classified as a commercial off-the-shelf item. Delivery is required within five days of contract award, with shipment terms FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to comply with ASTM D3951 and MIL-STD-129 labeling, subject to the overriding authority of the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA’s RP001 packaging standards, including palletization, and the unit of issue is each, with four units total. The items are destined for FPO AP 96349 and the physical delivery address at Yokosuka Naval Base in Japan, with specific transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8EE-26-T-2210, with a required delivery date of August 3, 2026, and all technical specifications referenced via R and I numbers in the DLA Master List must be met. Government-specific identifiers and administrative codes are included for internal tracking and logistics coordination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
BEARING ASSEMBLY, PU
Solicitation # SPE7M1-26-T-248L
The contract is for one bearing assembly, part number 818404-000K, manufactured by Armstrong Pumps Inc, designated by NSN 4320-01-075-3027, intended for use on a booster pump in a Bell & Gossett HS-105 application. Delivery is required within 20 days from contract award, with shipment FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for labeling, with no special marking required. Palletization follows DLA packaging requirements, and the item must be shipped to the specified FPO address for USNS SALVOR. The contract prohibits the use of ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds except in narrowly defined exceptions such as functional components in batteries, fluorescent lights, or instruments approved by NAVSEA. If mercury is present in portable lamps or instruments, a second containment boundary and shockproof design are mandatory per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract is issued under the U.S. Department of Defense via DLA, with payment and logistics managed through designated DLA vendor systems and transportation protocols as defined in DLAD PROC NOTES C19 and C20. The required delivery date is July 30, 2026, and primary point of contact is Michael Reese at DLA.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M0-26-T-030Z
The contract is for one unit of a sleeve, shaft, pump with NSN 4320-01-689-9051 under solicitation SPE7M0-26-T-030Z, issued as a total small business set-aside under NAICS code 333914. Delivery is required within five days of award, with shipment to FPO AP 96691 under FOB destination terms and zero tolerance for quantity variance. The item must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special markings or palletization exceptions. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Transportation must follow DLA procedures C19 and C20, using the fastest traceable method—parcel post is prohibited. The contract incorporates technical and quality requirements from the DLA Master List, and the revision in effect on the award date governs. The government point of contact is Grace Beck, and the required delivery date is July 29, 2026, with no need ship date specified.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
GEAR ROTOR SET, ROTA
Solicitation # SPE7M0-26-T-029C
The contract pertains to the procurement of one GEAR ROTOR SET, ROTA, with NSN 4320-01-693-6716 and part number PGP511A0280CK1H2VD6D5B1B1 from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-029C. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with stringent technical and quality requirements outlined in the DLA Master List, including packaging per ASTM D3951 and labeling per MIL-STD-129, with palletization adhering to DLA packaging standards. The item is designated as a critical application, and zero non-conformances are required in sampling under MIL-STD-1916 or equivalent zero-based plans. Configuration changes require formal engineering change proposals, and government identification must be removed from non-accepted supplies. Unit of issue is each, and item unique identification is not required per customer request. Shipments must be sent via traceable freight to the specified Jacksonville, Florida delivery address, excluding parcel post, and must reference the RDD and transport control number. The item is classified under NAICS 333914 and is procured by the Department of Defense through the Maritime Supply Chain ESO Buys office. The required delivery date is August 3, 2026, with no need for an earlier ship date. All documentation and compliance measures must follow DLA directives, and any deviations require formal variance approval. Contractual obligations are binding, and failure to meet specifications may result in rejection or financial penalty. The primary point of contact is Grace Beck, with all communications and inquiries directed through DLA’s official procurement systems.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
PUMP, AXIAL PISTONS
Solicitation # SPE7M1-26-T-249D
The contract is for the procurement of one axial piston pump, identified by NSN 4320-01-700-7217 and part number HH6544-4 from Dometic Marine Canada Inc., classified as a commercial off the shelf item. Delivery is required within 20 days of award with a firm fixed price of one unit, no quantity variance permitted, and delivery must be made FOB origin to the specified Virginia Beach location. Inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required, and palletization must adhere to DLA packaging requirements. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by specifications. Shipment must be sent via the fastest traceable means, not parcel post, and transportation logistics are guided by DLAD procedural notes. The solicitation number is SPE7M1-26-T-249D, with a response deadline of August 17, 2026, and the required delivery date is July 30, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Government use identifiers include IPD 06, DIC A4A, and other administrative codes for tracking and distribution.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
PUMP UNIT, CENTRIFUG
Solicitation # SPE7M1-26-T-248Q
The contract specifies the procurement of a single centrifugal pump unit identified by NSN 4320013977128 and part number WMD-40RLT-111 from IWAKI AMERICA INCORPORATED, with a required delivery within 20 days to FOB destination. The item is designated as a critical application item and must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. The delivery address is FPO AP 96694 for USS KINGSVILLE LCS 36, and shipping must be conducted via vessel shipment using the fastest traceable means; parcel post is explicitly prohibited. Packaging must adhere to RP001 DLA Packaging Requirements and be palletized accordingly, with no variance allowed in quantity—exactly one unit must be delivered. The contract references specific DLA procurement procedures and transport directives, including DLAD PROC NOTE C19 and C20, and requires the supplier to use the VSM system and reference the RDD 777 shipment code. The purchase request is 7017727071, with a required delivery date of July 31, 2026, and the solicitation number is SPE7M1-26-T-248Q, issued by the Department of Defense’s Maritime Supply Chain under NAICS code 333914. All technical and quality clauses are governed by the DLA Master List current as of the solicitation issue date, and the point of contact is Michael Reese.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
Federal
COMPRESSOR,ROTARY
Solicitation # N0010426QJC06
This contract solicitation, issued under Emergency Acquisition Authority, seeks repair services for a ROTARY COMPRESSOR under a firm-fixed-price structure with a mandatory 636-day Repair Turnaround Time (RTAT), measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All quotations must include unit and total pricing, confirmed RTAT, and, if unable to meet the required timeline, a detailed explanation of capacity constraints. The Government requires full compliance with MIL-STD-130 Rev N for marking, adherence to manufacturer specifications and technical directives, and performance of all inspections and tests consistent with original design standards. Inspection is mandatory and may be conducted by the Government at any point; contractor records of all inspection activities must be maintained for 365 days post-delivery. Delivery is FOB Origin, with freight handled by the Navy, and the contractor must ensure accurate CAV system reporting within five business days of receipt. Any failure to meet the RTAT will result in a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. The contractor must be an authorized distributor of the original manufacturer’s item, providing documented proof of authorization with the quote. The Cage Code for the awardee and any facility where repair occurs must be specified, and pricing must be justified against historical data or commercial market rates if the item has not been previously procured by NAVSUP WSS or if pricing exceeds prior levels. If an item is deemed Beyond Repair (BR), a limited T&E fee not to exceed a specified amount may be negotiated based on incurred costs. All technical documents referenced are to be obtained through official DoD sources, with strict controls on the distribution of materials marked with distribution statements such as C, D, E, or F, in alignment with OPNAVINST 5510.1. Compliance with cybersecurity maturity model certification requirements, small business subcontracting goals, and the mandatory use of Workflow Pro (WFP) Mod Assist are also contractually enforced. This solicitation is bilateral, requiring the contractor’s signed acceptance prior to award, and all responses must verify nomenclature, part number, and NSN prior to submission.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
Federal
PUMP UNIT,CENTRIFUG
Solicitation # N0010426QJB90
This contract solicitation, issued by the Navy’s Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair centrifugal pump units under a firm-fixed-price arrangement. The required Repair Turnaround Time (RTAT) is 503 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with final Government inspection and acceptance due within that timeframe. Delivery is FOB Origin, and all freight is managed by the Navy under the CAV Statement of Work. The Contractor must comply with MIL-STD-130 Rev N marking requirements and adhere strictly to manufacturer specifications and approved technical documentation. Government Source Inspection is mandatory, and records of all inspection and testing activities must be maintained for at least 365 days after final delivery. The contract includes provisions for a potential increase in quantity via an option exercisable within 365 days of award, and imposes strict performance penalties for failure to meet the RTAT, with monthly price reductions per unit and potential termination for default. Pricing must be justified against historical data or commercial benchmarks, and contractors must disclose whether their proposed RTAT meets or exceeds the Government’s requirement. Only authorized distributors of the original equipment manufacturer may respond, requiring proof of authorization. The item is classified under NAICS code 333914 and falls under small business program representation, with compliance required for all applicable federal clauses including those related to security, abilityone contractor release, and priority ratings for national defense. All technical materials provided are subject to distribution statements as defined by OPNAVINST 5510.1, with NOFORN and Official Use Only documents requiring special certification before release. Quotations must include unit and total pricing, RTAT, and any applicable T&E fees for items determined beyond repair, capped at a government-negotiated not-to-exceed amount.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 20 days
View Details
NAICS: 333914
New
Federal
CRANKSHAFT,COMPRESS
Solicitation # N0010426QJC04
This contract seeks repair services for a CRANKSHAFT, COMPRESS under solicitation N0010426QJC04, with a mandatory Repair Turnaround Time (RTAT) of 200 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must adhere to the contractor’s approved technical standards, manufacturer specifications, and government-mandated requirements including MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging. The contract requires Government Source Inspection and mandates that all items be returned to the Navy within the specified RTAT; failure to meet this deadline results in a per-unit, per-month price reduction up to a maximum amount, without limiting the Government’s right to terminate for default. The contract is firm-fixed-price, with freight FOB Origin, and the Navy handles all logistics through the CAV system. Contractors must verify part numbers, NSNs, and nomenclature before submitting quotes, and must include unit and total pricing, RTAT, and justification for pricing if it deviates from historical or commercial values. The solicitation requires evidence of authorized distributor status for the original manufacturer’s item, submitted on official company letterhead. All repair documentation, inspection records, and testing results must be maintained for at least 365 days after final delivery and made available to the Government upon request. If an item is determined beyond repair, a negotiated T&E fee not to exceed a specified amount may apply. The contract includes requirements for cybersecurity maturity certification, mandatory use of Workflow Pro, compliance with Small Business Subcontracting Plan and Contractor Purchasing System Administration deviations, and adherence to security prohibitions. The award will be bilateral, requiring the contractor’s signed acceptance. Responses are due by August 19, 2026, and the North American Industry Classification System code is 333914. The contracting officer is located at NAVSUP WSS in Mechanicsburg, PA, and all technical references, including military specifications and restricted documents, must be obtained through authorized government channels with proper distribution statements and access certifications.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
SLED
Pumping System Improvements
Solicitation # PE-77004-NONST-2026-000000002
Sealed bids are being solicited by the Georgetown-Quitman County Unified Government for the construction of Pumping System Improvements under solicitation number PE-77004-NONST-2026-000000002, with submissions due by 11:00 AM local time on September 8, 2026, at Georgetown City Hall in Georgetown, Georgia. The project requires the purchase and delivery of a single centrifugal vacuum prime pump that is skid-mounted and fully equipped with all necessary appurtenances to ensure it is ready for immediate operation upon delivery. Contractors must provide all materials, labor, and equipment to complete the work in full compliance with the project specifications. Bids must be submitted as a lump sum with unit pricing and may include alternate bid items as outlined in the official bid form. The solicitation is structured as a single prime contract with no set-aside provisions. Bidding documents can be reviewed during regular business hours at both the Issuing Office, Still Waters Engineering in Leesburg, Georgia, and at Georgetown City Hall. Documents are available electronically as PDF files for a non-refundable fee of $300, with an additional $100 charge for paper copies. Payment must be received before documents are distributed via email or other electronic means. Requests for documents and inquiries should be directed to Chad Griffin or Nikki Griffith at Still Waters Engineering. All bids will be publicly opened at the specified deadline and evaluated based on compliance with technical requirements and pricing structure. The project is located within Georgetown-Quitman County, Georgia, and the complete technical specifications and contractual terms are accessible only through the official bidding package obtained from the Issuing Office.
Unified Government of Georgetown-quitman County

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333914
New
DIBBS
NOZZLE, FUEL AND OIL SE
Solicitation # SPE8EE-26-T-2207
The contract specifies the procurement of seven fuel and oil servicing nozzles under NSN 4930-00-861-9982, with a delivery deadline 156 days after award, as part of purchase request 7017585209. The solicitation number is SPE8EE-26-T-2207, issued by the Defense Logistics Agency, and requires strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The nozzle must include source-controlled components sourced only from approved suppliers listed on the applicable source control drawing. All items must be marked per MIL-STD-130N for identification. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero defects required for acceptance unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons without prior government authorization, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors with U.S./Canada Joint Certification Program approval, completed training, and DLA authorization. The contract also incorporates DLA packaging requirements and mandates the removal of government identification from non-accepted supplies. The vendor must hold CMMC Level 2 certification as a third-party assessment organization, and all work will be performed at the designated location in New Cumberland, Pennsylvania.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-26-T-248E
The contract is for the procurement of seven rotary pumps with an integrated thermistor, specifically designated for marine applications, where the OEM adds the thermistor without altering the part number. The item is identified by NSN 4320-25-160-7781 and must be ordered under the correct specifications to ensure compliance with marine operational requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA packaging requirements outlined in RP001, with palletization following specified guidelines. All units are to be delivered FOB origin, inspected and accepted at destination with no variance allowed in quantity. The delivery deadline is 157 days from the contract award, with the original required delivery date set for May 14, 2027, and a needed ship date of January 19, 2027. Each unit is priced at $7.00, totaling $49.00 for the full order. The contract, issued under solicitation SPE7M1-26-T-248E, is a total small business set-aside under NAICS code 333914, managed by the Department of Defense’s Maritime Supply Chain. Deliveries must be routed to the designated receive warehouse in Tracy, California, and transportation procedures must follow DLAD Proc Notes C19 and C20. The point of contact for inquiries is Michael Reese, with contract details accessible via the DIBBS portal.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details