Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESISTOR NETWORK, FIXED

Active
SPE7M0-26-T-012XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a fixed film resistor network with the NSN 5905012185402 and part number M8340108K3320FC, manufactured in accordance with MIL-PRF-83401H Sup 1 and MIL-PRF-83401/8E Rev E, both dated May 29, 2024. This is a critical application item requiring strict compliance with国防部 technical and quality requirements referenced from the DLA Master List, and the use of any Class I ozone-depleting substances is strictly prohibited unless explicit written approval from the Contracting Officer is obtained. The item must be packaged per MIL-STD-2073-1E with marking in accordance with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free attributes on each unit package. ESD and EMI protection is mandatory, requiring MIL-PRF-81705 qualified packaging materials—Type I barrier material for both ESD and EMI protection, with verification that all materials are sourced from manufacturers listed on QPL-81705. The supplier must ensure physical protection of leads and terminals to prevent damage during handling and transport. Delivery is required within five days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. The item must be shipped via traceable freight methods, not parcel post, to Robins AFB, Georgia, with the original required delivery date set for July 17, 2026.

General Info

Fixed film resistor network, MIL-PRF-83401H/E compliant, Pb-free, ESD/EMI protected, delivery FOB origin by July 17, 2026

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

455 BYRON ST BLDG 376, ROBINS AFB, GA, 31098-1626, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-012X for DLA Maritime Supply Chain ESOC Buys

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Laurie Wassmuth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR NETWORK,FIXED,FILM
RESISTOR NETWORK,FI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-83401/8E(4) REVISION NR E DTD 05/29/2024 PART PIECE NUMBER: M8340108K3320FC
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-83401H(5) SUP 1 REVISION NR H DTD 05/29/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M0-26-T-012X
SECTION B
PR: 7017539625 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017539625 0001 EA 1.000
NSN/MATERIAL:5905012185402
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
SPE7M0-26-T-012X
SECTION B
PR: 7017539625 PRLI: 0001 CONT’D
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
FB2065
FB2065 AF SUPPLY CNTRL RECV
CP 478 926 2325
455 BYRON ST BLDG 376
ROBINS AFB GA 31098-1626
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2065
FB2065 AF SUPPLY CNTRL RECV
CP 478 926 2325
455 BYRON ST BLDG 376
ROBINS AFB GA 31098
US
M/F: (TCN) FB206561950400
RDD: 777
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE7M0-26-T-012X NSN/Part Number: 5905-01-218-5402 Quantity: 1 EA Purchase Request: 7017539625QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
Manufacturing of Fixed Micro Capacitors (MIL-DTL-39028 Compliant)The contract requires the manufacture of 72 fixed micro capacitors fully compliant with MIL-DTL-39028 specifications, encompassing all stages from sourcing raw materials and assembly to rigorous testing, proper packaging, and accurate marking for traceability and compliance. The work must be completed in accordance with military standards, ensuring performance, reliability, and environmental resilience under operational conditions expected in defense applications. All deliverables must meet stringent quality control benchmarks and documentation requirements to validate conformance throughout the production lifecycle. The contract is issued as a subcontract under the NAICS code 334416 for electronic component manufacturing, with performance scheduled to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a narrow twelve-day window for proposal submission. The contracting activity falls under the Department of Defense through its Active Devices Division, signifying this is part of a critical defense supply chain requiring adherence to federal procurement protocols and readiness for inspection and audit. Delivery timelines and compliance verification are central to fulfilling contractual obligations successfully.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Radio Frequency Coil Manufacturing and SupplyThe contract requires the manufacture and supply of three Radio Frequency Coils identified by National Stock Number 5950-01-223-9021 and part number 11449949-9, all of which must strictly comply with applicable military specifications and the National Defense Authorization Act of 2018 provisions that prohibit the use of telecommunications equipment from certain restricted vendors. The product must be produced and assembled in accordance with defense standards to ensure operational reliability and supply chain integrity, with special attention to sourcing components from approved and compliant suppliers. All units are to be delivered to the designated place of performance in Chambersburg, Pennsylvania, with final inspection and acceptance procedures governed by defense procurement protocols. This subcontract, issued under the NAICS code 334416 for Electromedical and Electrotherapeutic Apparatus Manufacturing, is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and interested parties must submit proposals through the DIBBS platform using the provided link. Compliance with all federal procurement regulations, including those related to cybersecurity, supply chain risk management, and export control, is mandatory. Failure to meet the NDAA 2018 restrictions or military specifications will result in automatic disqualification or contract termination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Power Supply Assembly ManufacturingA subcontract is being issued for the design, fabrication, testing, and delivery of a single Power Supply Assembly designated by NSN 6130-01-476-2036, requiring full compliance with military technical specifications. The deliverable must include complete documentation, proper packaging and marking, and adherence to current cybersecurity standards, ensuring the unit is ready for immediate integration into defense systems. All work must be performed in accordance with the stringent quality and security protocols expected by the Department of Defense. The solicitation, posted by the Defense Logistics Agency on July 20, 2026, has a response deadline of July 31, 2026, and is classified under NAICS code 334416 for electrical equipment manufacturing. The place of performance is listed as FPO with ZIP code 96675, indicating delivery to a military postal address. This opportunity is open to qualified subcontractors with proven capability in military-grade power system development and must meet all federal contractual obligations without set-aside restrictions.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RF Interference Filter Supply (COTS Component)The contract entails the supply of 108 commercial off-the-shelf radio frequency interference filters designed to meet stringent military packaging, labeling, and cybersecurity requirements. These components are intended for use in defense-related systems where electromagnetic compatibility and secure data integrity are critical. The items must comply with all applicable military standards without custom modification, leveraging existing COTS products to ensure rapid deployment and cost-efficiency while maintaining operational reliability under demanding environmental conditions. Issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, the procurement falls under NAICS code 334416, which encompasses electromagnetic and electronic warfare equipment manufacturing. The contract was posted on July 20, 2026, and is managed through the DIBBS system with the contract number SPE7M026V4714. Performance location details are unspecified, indicating potential flexibility in delivery or reliance on existing defense supply chains. No set-aside provisions or small business designations are indicated, and all units must be delivered with full documentation confirming compliance with defense-grade security and labeling protocols.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 334416
New
DIBBS
Thermal Resistor Component SupplyThe contract involves the supply of a military-spec thermal resistor identified by NSN 5905-01-524-1193, with strict compliance required to MIL-STD-129 for marking and packaging and J-STD-609 for soldering and interconnection standards. Delivery must be completed within 30 days of contract award, ensuring timely integration into defense logistics streams. The item falls under NAICS code 334416, indicating it is classified within the electronic component manufacturing sector, and the procurement is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESO BUYS organization. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapid procurement timeline typical of urgent defense supply needs. All offerings must meet exacting military compliance standards without exception, and performance is expected to align with DoD logistics protocols. The contract is administered through the DIBBS platform, and while the place of performance and point of contact details are not specified, the requirement remains firm that the thermal resistor be furnished in full compliance with applicable defense specifications and delivered on schedule.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY ASSEMBLYThe contract pertains to the procurement of a single Power Supply Assembly identified by NSN 6130-01-476-2036, with a delivery requirement of 20 days ADO. The solicitation, issued by the Defense Logistics Agency under number SPE7L7-26-T-4377, is open for response until July 31, 2026, and falls under NAICS code 334416 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision tied to the solicitation issue date. The contractor must comply with DLA packaging standards and cannot intentionally introduce mercury or mercury compounds into the product except for specific approved applications such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. The contractor is required to maintain a Cybersecurity Maturity Model Certification Level 2 self-assessment and must remove any government identification from non-accepted supplies. Technical data is not provided by DLA, and performance is to occur at FPO, with Michael Francis designated as the primary point of contact.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
FILTER, RADIO FREQUEThis contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
COIL, RADIO FREQUENCYThe contract specifies the procurement of a Radio Frequency Coil identified by part number 11449949-9 and NSN 5950-01-223-9021, with a requirement for three units to be delivered within five days of order placement. Delivery is FOB origin, with inspection and acceptance occurring at the destination, the Letterkenny Army Depot in Chambersburg, Pennsylvania. All packaging must comply with DLA’s stringent packaging requirements, prioritizing the DLA Master List of Technical and Quality Requirements over ASTM D3951, and must be marked and labeled per MIL-STD-129. Hazardous material handling is governed by Fed-Std-313 and TQ requirement IP025 if applicable. The item must meet all referenced technical data and part number specifications, even if the provided documentation is incomplete. Use of ozone-depleting substances is strictly prohibited unless written approval is obtained from the Contracting Officer, and this rule overrides any conflicting specification requirements but does not lessen performance expectations. The contractor must maintain CMMC Level 2 cybersecurity self-assessment compliance, and shipment must be sent via the fastest traceable means, excluding parcel post. The unit of issue is each, with no variance permitted in quantity. The primary point of contact is Audrey Acuna with the Department of Defense, and the solicitation closes on July 31, 2026, with an original required delivery date of July 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract pertains to the procurement of a single thermal resistor with NSN 5905-01-524-1193 under solicitation SPE7M0-26-Q-1078, with a delivery requirement of 30 days after award. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or their subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to handle such data. The solicitation, posted on July 20, 2026, with a response deadline of July 23, 2026, is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with Laurie Wassmuth designated as the primary point of contact. Additionally, the contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessment organization to meet cybersecurity requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
COIL, RADIO FREQUENCYThe contract pertains to the procurement of three Radio Frequency Coils, identified by NSN 5950-01-224-5874 and part number TT800K8I-10, under solicitation SPE7M0-26-T-013B, with a total contract value of $3.00. Delivery is required within five days of award to the Letterkenny Army Depot in Chambersburg, Pennsylvania, with FOB Origin terms applying. All packaging must comply with DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951, and include labeling and marking per MIL-STD-129, with palletization aligned to RP001. If the item is deemed hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is acceptable. The material must be shipped by the fastest traceable means, excluding parcel post. Inspection and acceptance occur at the destination, and electronic invoicing through Wide Area WorkFlow (WAWF) is mandatory. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing cybersecurity, including NIST SP 800-171 requirements and CMMC Level 2 self-assessment compliance, as well as trafficking in persons, equal opportunity, sustainable products, hazardous materials handling, export control, and small business representation. Offerors must maintain a valid Unique Entity Identifier and CAGE code and provide socioeconomic status certifications. Cybersecurity protocols require safeguarding of covered defense information and reporting of cyber incidents. The contract includes deviation waivers for several clauses under Deviation 2026-00038 and imposes strict adherence to DLA’s acquisition rules for simplified purchases. The original delivery date is set for July 17, 2026, and the solicitation closed on July 31, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, MICThis contract specifies the procurement of a fixed micro capacitor under NSN 5910-01-208-6473, with a requirement for 72 units to be delivered within 89 days from the contract award, FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All packaging and preservation must conform to SPE7M5-26-T-336R, Section B, and MIL-DTL-39028 for capacitors. The contractor must apply specific lead finish markings per IPC/JEDEC J-STD-609 on each unit package, clearly identifying lead content, and must avoid all Class I ozone-depleting substances in manufacturing unless written approval is obtained from the contracting officer. Acceptance testing follows Army Drawing 18876-11436863, with waiver of paragraph 6 permitted only for previously accepted manufacturers, though DSCC retains the right to reinstate requirements at any time. Sampling procedures require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise directed, with unspecified attributes considered major. The contract prohibits any variance without formal request and mandates removal of government identification from non-accepted items. Delivery is directed to DLA Distribution at New Cumberland, PA, with required ship date set for October 29, 2026. Unit price is $72.00 per unit, totaling $5,184.00, and all data aligns with the solicitation SPE7M5-26-T-336R issued by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Supply of Fixed Ceramic Dielectric Capacitors (NSN 5910010815383)The contract entails the manufacture or supply of 71 units of fixed ceramic dielectric capacitors compliant with military specifications, covering all aspects from production to final delivery. This includes rigorous testing to ensure adherence to performance and reliability standards, proper packaging and labeling in accordance with military requirements, and FOB Origin delivery to DLA Tracy, California. The items are identified by National Stock Number 5910010815383 and fall under NAICS code 334416, indicating classification within the electronic component manufacturing sector. The solicitation is issued as a subcontract under the Department of Defense’s Active Devices Division and is open for responses until July 30, 2026, with the posting date set for July 19, 2026. Delivery must be made to the designated location in Tracy with zip code 95304-5000, and all compliance and documentation must meet federal defense procurement protocols.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332999
New
DIBBS
Supply of Nonmetallic Hose Assembly (NSN: 4720996138974)The contract involves the supply and delivery of a single nonmetallic hose assembly designated by NSN 4720996138974, meeting stringent military specifications that mandate a shock-proof design and the complete exclusion of ozone-depleting chemicals. Full traceability is required through barcoding systems and adherence to strict preservation standards, ensuring the asset can be tracked and maintained throughout its lifecycle. The assembly is to be delivered to a designated performance location in West Bath, Maine, with a zip code of 04530, under a subcontract arrangement classified under NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is managed by the Maritime Supply Chain ESOC Buys division within the Department of Defense. The procurement emphasizes compliance with defense-grade quality and environmental standards without any specified set-aside provisions.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Supply of Circuit Breakers with Hazardous Materials ComplianceThree units of circuit breakers with NSN 5925002625723 are to be supplied and delivered to a military storage facility in Sagamihara, Japan, under a subcontract agreement governed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS. All units must comply fully with hazardous materials handling, labeling, packaging, and documentation standards to meet military safety and regulatory requirements. The solicitation was posted on July 20, 2026, with responses required by July 31, 2026, and the contract falls under NAICS code 335312 which pertains to the manufacture of electrical equipment for power distribution. The delivery location is specified as the military installation in Sagamihara, and all packaging and documentation must reflect strict adherence to international and defense-specific protocols for hazardous components. The contractual obligation is managed through the DLA DIBBS platform under reference number SPE7M026T013A.
Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Supplier of Cartridge Valve Units (NSN 4730-01-529-5515)The contract requires the supply or manufacture of four units of Cartridge Valve SAN compliant with Department of Defense technical specifications, specifically tied to NSN 4730-01-529-5515, with a strict requirement that all units be free of Class I ozone-depleting chemicals. The work is to be performed at the specified place of performance in Texarkana, Texas, with a zip code of 75507-5000, and falls under NAICS code 332996, indicating it is related to other fabricated metal product manufacturing. The solicitation, issued by the Maritime Supply Chain ESOC Buys office under the Department of Defense, is structured as a subcontract and has a response deadline of July 31, 2026, with the request publicly posted on July 20, 2026, allowing vendors approximately eleven days to submit proposals. All deliverables must meet exacting military standards and environmental compliance criteria as defined by federal regulations.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight & FOB-Origin Delivery LogisticsThe contract requires the execution of FOB-origin delivery for four specialized units within five days of award, emphasizing rapid response and timely logistics coordination. All invoicing and receiving documentation must be processed through the Web Automated WorkFlow (WAWF) system to ensure compliance and traceability. The performance location is specified as Texarkana, with a ZIP code of 75507-5000, indicating the physical destination for delivery. The contract falls under NAICS code 484220, classifying it as a motor freight transportation service, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys division. Bids must be submitted by the response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026, allowing potential vendors approximately eleven days to prepare and respond. The requirement underscores the need for precision in timing, documentation, and adherence to Defense logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Communication & Labeling ComplianceThe contract requires the preparation and submission of hazard labels and safety data sheets SDS or MSDS that fully comply with OSHA 29 CFR 1910.1200 and the Globally Harmonized System of Classification and Labeling of Chemicals GHS standards for all hazardous components involved. This effort is critical to ensuring accurate communication of chemical hazards to users and handlers across the supply chain, aligning with federal safety regulations. The work must be performed to meet strict technical and formatting requirements to guarantee consistency, clarity, and regulatory adherence in all documentation. This subcontract is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys office, with performance expected to take place in Texarkana, Texas, zip code 75507 5000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System NAICS code 541690 indicates this is a professional, scientific, and technical service, specifically covering other scientific and technical consulting services. The contract is open to subcontractors seeking to support defense logistics through compliant hazardous materials communication systems.
Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, barcoding, and data matrix application services strictly aligned with MIL-STD-129 and DLA RP001 standards for military shipments, ensuring full compliance with Department of Defense specifications for traceability and logistics readiness. All work must be performed to meet exacting military requirements for durability, legibility, and data accuracy in packaging and labeling systems used throughout the supply chain. The contract is classified as a subcontract under NAICS code 561910, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. Performance is designated for a location in Texarkana with ZIP code 75507-5000, and the contracting activity is managed by the Maritime Supply Chain ESOC Buys division under the Department of Defense. No set-aside provisions are specified, and the procurement is open to qualified subcontractors capable of meeting rigorous military packaging and labeling mandates.
Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance Support (NIST SP 800-171)This contract requires support for implementing NIST SP 800-171 controls and DFARS requirements to protect covered defense information during order fulfillment and invoicing processes. The work is focused on ensuring compliance with federal cybersecurity standards for handling sensitive defense data, including the establishment, validation, and maintenance of appropriate security controls across systems and workflows involved in fulfilling defense-related orders. The subcontract is tied to the NAICS code 541512, indicating it relates to computer systems design services, and will be performed at a military post office location with the zip code 96306-1204. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is issued by the Maritime Supply Chain ESOC Buys office under the Department of Defense. The contract is structured as a subcontract, meaning it supports a larger prime contract or program involving defense logistics or supply chain operations. The performance location is designated as FPO, indicating operations may be conducted in a deployed or overseas military environment. Successful bidders must demonstrate proven capability to execute NIST 800-171 compliance activities, align with DFARS regulations, and ensure continuous protection of covered defense information throughout the entire order lifecycle.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires compliance with hazard communication standards for hazardous materials associated with a voltmeter and its packaging, specifically ensuring the provision of accurate Safety Data Sheets and proper labeling in accordance with regulatory requirements. This is a subcontract under the NAICS code 541620, issued by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance required at the FPO ZIP code 96306-1204. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026, targeting suppliers capable of managing chemical safety documentation and labeling for electronic components. All work must align with federal hazard communication protocols, focusing on the accurate identification and communication of risks related to hazardous substances present in or with the voltmeter. The contract does not specify a set-aside category and lacks detailed point of contact information, leaving potential offerors to rely on the provided DIBBS link for further details. Compliance is non-negotiable and central to contract fulfillment, demanding thorough understanding of OSHA’s HazCom standards and the ability to deliver documentation and labeling solutions that meet military supply chain requirements.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
Commercial Voltmeter SupplyThe contract calls for the supply of two commercial voltmeters identified by NSN 6625016240283, intended as off-the-shelf electronic test instruments for use by the U.S. Naval Air Facility Atsugi in Japan. These devices are to be procured under a subcontract and are classified under NAICS code 334515, which pertains to the manufacturing of electronic test equipment. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the place of performance is designated as FPO with ZIP code 96306-1204. The procurement is managed by the Maritime Supply Chain ESOC Buys organization under the Department of Defense, and the instruments must meet standard commercial specifications without customization.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) for all hazardous materials present in the coil, ensuring that proper labeling is applied according to MIL-STD-129 specifications and that up-to-date Safety Data Sheets are provided for each regulated substance. This obligation extends to every stage of handling, packaging, and delivery to guarantee that all personnel and downstream users receive accurate, accessible information regarding chemical hazards, safe handling procedures, and emergency response measures. The requirement is binding and non-negotiable, with strict adherence to federal safety regulations as a condition of contract fulfillment. The solicitation is classified as a subcontract under NAICS code 541620, issued by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance expected to occur in Chambersburg, Pennsylvania, at the specified ZIP code. Responses must be submitted by the deadline of July 31, 2026, and potential offerors should verify all compliance protocols before submission. The posting date indicates the opportunity became available on July 20, 2026, and participants are expected to demonstrate proven expertise in hazardous materials management, labeling conformity, and regulatory documentation in alignment with both OSHA and Department of Defense standards.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541618
New
DIBBS
CMMC Level 2 Cybersecurity Compliance and AssessmentThe contract requires the performance of a CMMC Level 2 self-assessment to verify compliance with NIST SP 800-171 standards for safeguarding controlled unclassified information. The work involves a thorough evaluation of existing cybersecurity practices, identification of gaps, and the preparation of comprehensive documentation to demonstrate adherence to the required controls. The goal is to ensure the organization meets the Department of Defense’s cybersecurity requirements for handling sensitive, unclassified data in alignment with the CMMC framework. This subcontract is associated with the Maritime Supply Chain ESO BUYS under the Department of Defense and has a place of performance in Chambersburg, Pennsylvania, with a zip code of 17201-4150. It is classified under the NAICS code 541618, indicating services related to other scientific and technical consulting. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. While no specific point of contact or set-aside type is provided, the contract is structured as a subcontract and can be accessed through the DIBBS portal using the provided reference link.
Other Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423830
New
DIBBS
Defense-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging, labeling, and marking services fully compliant with MIL-STD-129 standards as defined by the Defense Logistics Agency, ensuring all materials are properly identified, documented, and prepared for military distribution. Services must include rigorous handling of hazardous materials in accordance with federal and DLA guidelines, along with accurate unit identification and marking to support logistics and inventory operations across the Department of Defense supply chain. All work must be performed to meet strict quality and procedural requirements to ensure seamless integration into military logistics systems. The solicitation is issued as a subcontract under NAICS code 423830 for the Maritime Supply Chain ESOC Buys division of the Department of Defense, with performance required at a designated location in Chambersburg, Pennsylvania, 17201-4150. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026. The contract does not specify a set-aside classification and is accessible through the DIBBS platform under solicitation number SPE7M0026T013G. Vendors must be prepared to uphold all military specifications without exception and demonstrate proven capability in defense-compliant packaging and labeling protocols.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details