Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RETAINER, PACKING

Active
SPE7M4-26-T-396WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M4-26-T-396W, issued by the Department of Defense Fluid Handling Division, seeks quotes for 127 units of packing retainers under NSN 5330-01-312-7380. This requirement is categorized under NAICS 339991 and is identified as a GE PBL item and a commercial item. The delivery timeline is set for 301 days after order, with the place of performance located at Tinker AFB. The contract mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. It explicitly prohibits the use of asbestos as defined in FED-STD-313 and requires the removal of government identification from any non-accepted supplies. Quotes must be submitted via the DIBBS system by the deadline of September 21, 2026, and must comply with domestic sourcing regulations including the Buy American Act and Berry Amendment.

General Info

DoD seeks quotes for 127 packing retainers for Tinker AFB by September 21, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-396W Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER,PACKING
RETAINER, PACKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
This NIIN has been identified as a GE PBL item.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-01-312-7380 Quantity: 127 EA Purchase Request: 7018270510QTY: 127 Delivery: 301 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is a request for an Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of flexible couplings, identified as NSN 1660-00-560-4009. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. This item is designated as a Critical Application Item, with approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. The required delivery schedule is 365 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including source approval requests and tailored higher-level quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must complete a CMMC Level 2 self-assessment and comply with DFARS regulations regarding covered defense information and the Buy American program. Item Unique Identification is not required per the service customer's request. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-237G
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
SEAL ASSEMBLY KIT
Solicitation # 7017777381
This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.
DLA Land And Maritime

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
53--PARTS KIT,SEAL REPLACE
Solicitation # SPE7L3-26-T-248P
Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--SEAL,INFLATABLE
Solicitation # SPE7L3-26-T-247F
Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--O-RING
Solicitation # SPE7L1-26-T-10U5
Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--GASKET
Solicitation # SPE7LX-26-U-002P
Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54
Solicitation # SPRMM126QHE54
This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.
SPRMM1 DLA Mechanicsburg

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
SLED
Specialized Gasketing & Sealing Materials Supply
Procurement-Goods & Services

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 339991
New
DIBBS
O-Ring Supply (NSN 5331002639540)
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Critical Application Gaskets
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN 5330017193193)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, RESTRICTOR CHECK
Solicitation # SPE7M4-26-Q-0964
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 811 restrictor check valves under NSN 4820005649205. This requirement is listed under solicitation number SPE7M426Q0964 and is designated as a total small business set-aside with a NAICS code of 332911. Approved sources for this item include 09990 PCCK600S-0.70X7036 and 26519 3310-05. Items must be delivered to DLA Distribution within 163 days after the order is received. The solicitation is available electronically via the provided link, and quotes must be submitted by September 15, 2026. All responsible sources are encouraged to submit electronic quotes for consideration.
Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M3-26-Q-0206
Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-9002
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Supply of Fluid Filter Elements (NSN 4330-01-052-0080)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
Supply of Small DR Assembly No 5 (NSN 2040014384444)
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332919
New
DIBBS
47--REPAIR KIT,PIPE,EME
Solicitation # SPE7M3-26-T-9062
This contract is for the procurement of 128 emergency damage control pipe repair kits, identified by NSN 4730-01-414-6976 and part number BV-USA-2. The order is a total small business set-aside issued by the Department of Defense Fluid Handling Division, with a required delivery date of September 17, 2026, and a delivery window of 57 days after order. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Suppliers must adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Because the materials are classified as hazardous, contractors are required to submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to the award. Additionally, the supplier must ensure employees are trained on the current OSHA hazard communication requirements and comply with DLA packaging requirements for procurement.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,NONMETAL
Solicitation # SPE7M4-26-T-404J
This contract, identified as SPE7M4-26-T-404J, is a total small business set-aside for the procurement of 100 nonmetallic hose assemblies under NSN 4720-12-323-8769. The requirement is issued by the Department of Defense Fluid Handling Division, with Vincorion LLC and Vincorion Power Systems GmbH listed as sources for part number 355.02.0018. The total quantity of 100 units must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of March 6, 2027. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination. The procurement is managed under NAICS code 332999 and includes a delivery timeline of 102 days.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
DIBBS
47--PLUG,TUBE FITTING,T
Solicitation # SPE7M3-26-T-9067
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 41 threaded tube fitting plugs under NSN 4730-01-214-0258. The contract requires adherence to Eaton internal drawing PN A40 and cross-reference PN 169088-1, with a delivery timeline of 49 days after receipt of order. Performance is designated for Cherry Point, and the request is managed under solicitation number SPE7M3-26-T-9067. Strict compliance is required for several regulatory standards, including CMMC Level 2 certification for third-party assessments and DLA packaging requirements. Because the item involves technical data subject to ITAR or EAR export controls, access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,NONMETAL
Solicitation # SPE7M4-26-T-404N
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of three nonmetallic hose assemblies under part number 4720-01-349-9895. The contract requires delivery within 511 days after the order is placed and is associated with solicitation number SPE7M4-26-T-404N. Performance will take place at Robins Air Force Base. The agreement is subject to strict technical and quality standards, including specific DLA packaging requirements, origin inspection and acceptance, and physical item marking. Notably, the contract mandates compliance with Cybersecurity Maturity Model Certification Level 2 and involves covered defense information. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete required training and questionnaires to access the data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
47--HOSE ASSEMBLY,METALLIC
Solicitation # SPE7M4-26-T-404L
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 181 metallic hose assemblies under part number 4720-01-470-9852. The contract requires delivery within 433 days after the order is placed and is categorized under NAICS code 332999. Performance is designated for New Cumberland, Pennsylvania. Strict compliance is required regarding cybersecurity and export controls. Contractors must be CMMC Level 2 certified through a C3PAO and adhere to DLA packaging requirements. Because the technical data is subject to ITAR and EAR regulations, access is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
20--SMALL DR ASSY NO 5
Solicitation # SPE7M4-26-T-405Q
Solicitation SPE7M4-26-T-405Q is a Request for Quotations issued by the Department of Defense, specifically the DLA Land and Maritime Fluid Handling Division, for the procurement of two units of Small Dr Assy No 5, identified by NSN 2040014384444. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. All quotes must be submitted electronically via the DIBBS system. The required delivery date for the items is February 6, 2028, with the shipping destination and inspection/acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is categorized under NAICS code 332510 and requires manufacturers to maintain a quality system complying with SAE AS9003 or ISO 9001. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as strict prohibitions against the use of additive manufacturing processes unless specifically authorized. Payment will be processed electronically through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including those regarding the safeguarding of covered defense information and the prohibition of hexavalent chromium.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333998
New
DIBBS
43--FILTER ELEMENT,FLUID
Solicitation # SPE7M4-26-T-404Y
This solicitation, numbered SPE7M4-26-T-404Y, is issued by the Department of Defense Fluid Handling Division for the procurement of ten fluid filter elements, identified by NSN 4330-01-052-0080. The items are critical application components corresponding to Tate and Andale drawing G12379 Rev 2 and part number G12379-77REV3 for the Model 103BF duplex lube oil filtering assembly. This is a Women-Owned Small Business set-aside under NAICS code 333998, with a required delivery date of June 19, 2027, and a delivery timeframe of 283 days after order. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. It includes specific technical requirements regarding the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and the handling of covered defense information are required. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS