This Solicitation opportunity from Texas was posted on May 1, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RFC 121859-24-02 Roof Rehabilitation, East Harris AEM

Closed

121859-24-02State & Local

Submission Closed07/03/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 315210

New

Federal

CTX Employee Uniform Purchase

Solicitation # 36C25727Q0012

The Department of Veterans Affairs, Network Contracting Office 17, is soliciting a firm-fixed-price, indefinite quantity contract for the purchase of bulk employee uniforms for the Doris Miller VA Medical Center in Waco, Texas. The scope of work includes providing custom uniforms with embroidery and personalization, with deliveries made on an as-needed basis to the facility's Building 220. The ordering period is established from November 1, 2026, through October 31, 2031. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and requires offerors to be listed in the SBA certification database. Award will be based on Lowest Priced Technically Acceptable (LPTA) procedures, where the government will first verify that offers are complete before ranking them by price and evaluating the lowest bidder for technical capability. To be considered a complete offer, submissions must include a signed SF 1449, a detailed price schedule with unit prices rounded to the nearest hundredth, and a signed VAAR Clause 852-219-75 certificate of compliance. Proposals must be submitted via email to Marcellus Jackson by November 2, 2026, at 13:00 CST. Delivered items must be labeled with the awarded contract and purchase order numbers, and the vendor is responsible for the cost of repairing or replacing any defective products.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses

Solicitation # W911SD-26-Q-A114

The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

MAS Shield Kit SupplierThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense requires the procurement or manufacture of four MAS Shield Kits under NSN 8415-01-594-0416. The supplier is responsible for ensuring all kits meet strict NSN specifications and adhere to the Berry Amendment and the Buy American/Balance of Payments Program. Additionally, the contractor must provide Material Safety Data Sheets for any hazardous materials included in the kits. Logistical requirements mandate strict adherence to MIL-STD-129, MIL-STD-147, and MIL-STD-2073-1E standards for packaging and marking. The performance of this contract is centered in Jacksonville, and the response deadline for the solicitation is November 5, 2026.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0051

Solicitation SPE1C1-27-T-0051 is a procurement request by the Defense Logistics Agency for four units of the MAS SHIELD KIT, SPEC, identified by NSN 8415-01-594-0416. The contract specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 27, 2026. Delivery is set as FOB Destination, with shipping directed to the Marine Aviation Logistics SQ 26, 2nd Marine Aircraft Wing FMF in Jacksonville, North Carolina. Inspection and acceptance are both designated to occur at the origin per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement. Key regulatory compliance includes the Buy American and Balance of Payments Program (DFARS 252.225-7001), the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside, and it falls under NAICS code 315210.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0049

Solicitation SPE1C1-27-T-0049 is a Request for Quotations issued by the DLA Troop Support C and T Supply Chain for the procurement of six large flight deck crewman helmets, identified by NSN 8415017073208 and part number 72-R3-PB-1S from Team Wendy LLC. The requirement specifies a delivery timeframe of 20 days after order, with the items being shipped to the USS Jason Dunham DDG 109. Inspection and acceptance are both set at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-147, with specific requirements for intermediate container E5 and the use of UPC 718020959788. Compliance with the Berry Amendment, the Buy American Act, and CMMC Level 2 Self-Assessment is required. Administrative tasks, including payment requests and receiving reports, must be processed electronically through the Wide Area WorkFlow system. Quotations were due by November 5, 2026.

POSTED

DEADLINE

Solicitation # 2026-Informal-0447

The City of Pasadena Public Health Department is soliciting bids under solicitation number 2026-Informal-0447 for the purchase of customized uniforms for emergency response personnel. The scope of work includes the procurement of waterproof insulated jackets with hoods, zip-up hoodies, and both long-sleeve and short-sleeve t-shirts. Specific technical requirements for the jackets include a 5000MM waterproof rating, 3000G/M^2 breathability, and 100% polyester construction with 2-4 ounce polyfill, referencing the Sport-Tek JST56 style or an approved equal. The contract period runs from December 1, 2026, through June 30, 2027, with a requirement that all orders be completed within 30 days of placement and shipments made within 15 calendar days of ordering. Bids must be submitted electronically via the City's eProcurement Portal by 4:00 pm on November 2, 2026, and will be evaluated based on the lowest Grand Total Price. Required submission documents include a Unique Entity Identifier from SAM.gov, a Vendor Questionnaire, a Relevant Experience Form, and various federal certifications regarding lobbying and FEMA terms and conditions. Deliveries are to be made to the Public Health Emergency Preparedness office in Pasadena during specified business hours. Payment is processed on Net 30 terms through the Vendor Invoice Portal, with checks issued on Tuesdays and Thursdays. The City reserves the right to reject any products that fail to meet strict quality standards or approved samples.

Public Health Department

POSTED

DEADLINE

Mechanix MG55 Glove Manufacturing and SupplyThis subcontract involves the manufacturing and supply of Mechanix MG55 specification gloves for prime contractors supporting Department of Defense projects under the DLA Troop Support C and T Supply Chain. The scope includes sourcing or producing gloves in sizes small through XXL that correspond to specific National Stock Numbers, including 8415-01-677-9240, 9241, 9246, 9248, and 8415-01-667-9250. Performance is centered at Fort Bragg, with all deliverables required to meet strict packaging standards per MIL-STD-129 and MIL-STD-147E. Compliance is a critical component of the agreement, requiring adherence to the Berry Amendment for domestic sourcing and DFARS 252.204-7012 cybersecurity standards. The contract falls under NAICS code 315210 and was posted on October 21, 2026, with a response deadline of November 2, 2026.

POSTED

DEADLINE

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-27-T-0045

Solicitation SPE1C1-27-T-0045, issued by the DLA Troop Support C and T Supply Chain, is for the procurement of men's and women's gloves. The items must be manufactured in accordance with the Mechanix (CAGE 07LZ4) MG55 spec sheet and are available in sizes small, medium, large, x-large, and xx-large. A specific requirement for 25 pairs of medium gloves (NSN 8415-01-677-9241) is noted with a delivery timeline of 20 days after receipt of order. Delivery and inspection are set for destination at Fort Bragg, North Carolina. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as MIL-STD-129, ASTM-D-3951, and MIL-STD-147E. All invoicing and payment requests must be processed through the Wide Area WorkFlow system. Compliance with the Berry Amendment, Buy American Act, and various cybersecurity regulations, including DFARS 252.204-7012, is required. The procurement falls under NAICS code 315210, and quotes should be submitted via the DIBBS portal.

POSTED

DEADLINE

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-27-T-0047

Solicitation SPE1C1-27-T-0047, issued by the DLA Troop Support C and T Supply Chain, is for the procurement of men's and women's gloves. The items must be manufactured in accordance with the Mechanix (CAGE 07LZ4) MG55 specification sheet. The primary deliverable is identified under NSN 8415-01-677-9240, with a specific requirement for 25 pairs. Delivery is required within 20 days after receipt of order, with a target delivery date of October 23, 2026, to Fort Bragg, North Carolina. The contract is not a small business set-aside and falls under NAICS code 315210. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129, MIL-STD-147, and ASTM D3951, requiring the use of snug-fitting fiberboard shipping containers with a minimum burst strength of 275 psi. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must disclose any use of non-domestic materials.

POSTED

DEADLINE

Supply of MAS SHIELD KIT, SPEC (NSN 8415015940415)This subcontract through C AND T SUPPLY CHAIN for the Department of Defense involves the procurement and delivery of one MAS SHIELD KIT, identified by NSN 8415015940415. The selected contractor is responsible for sourcing the kit according to Gentex Corporation specifications and ensuring all quality assurance measures align with DLA Master List requirements. All items must be packaged and marked in strict accordance with MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E standards. Compliance with the Berry Amendment and the Buy American Act is mandatory for all materials used. The contract falls under NAICS code 315210, with the place of performance located at FPO 96672. Interested parties must submit their responses by the deadline of November 2, 2026.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0036

Solicitation SPE1C1-27-T-0036 is a request for quotations for one MAS Shield Kit, specifically Gentex Corporation part number 05D12001-2 (NSN 8415015940416). The requirement is issued by the Department of Defense C and T Supply Chain and is not a small business set-aside, falling under NAICS code 315210. The item is to be delivered FOB Destination to the USS Makin Island LHD 8, with a required delivery timeline of 20 days after award and an original required delivery date of October 22, 2026. Inspection and acceptance will take place at the point of origin. The contractor must adhere to strict packaging and marking standards, including MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirements under RP001. Compliance with the Buy American Act and the Berry Amendment is required for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the DLA Account Management and Provisioning System (AMPS) for shipment modules. Key regulatory clauses include FAR 52.246-2 for inspection and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0035

Solicitation SPE1C1-27-T-0035 is a fixed-price procurement issued by the Department of Defense through the DLA for one MAS SHIELD KIT, SPEC, identified by NSN 8415015940415. The requirement is not a small business set-aside and falls under NAICS code 315210. The item is specified as being produced by Gentex Corporation (CAGE 97427) with a required delivery date of October 22, 2026, and a delivery timeline of 20 days after receipt of order. Shipping is FOB Destination to the USS MAKIN ISLAND LHD 8 at FPO AP 96672. Both inspection and acceptance are to take place at the point of origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including packaging and marking standards MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirement RP001. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing must be processed electronically via the Wide Area WorkFlow system. This procurement may be eligible for automated award, provided there are no first article test requirements.

C AND T SUPPLY CHAIN

POSTED

9 days ago

DEADLINE

in 4 days

AI Contract Overview

The Texas Department of Transportation has issued a notice for a roof rehabilitation project at East Harris AEM located at 7303 Mesa Road in Houston, Texas, with an estimated cost of $280,000. The project requires mandatory pre-bid and site visits scheduled for May 28, 2024, with bids due by July 3, 2024, at the TxDOT headquarters in Austin. Bidders must submit proposals through the Bonfire platform, as all bids are now exclusively submitted online beginning September 1, 2023. The contract documents include various packages, with only the Contract Documents needing to be returned as part of the proposal. The project emphasizes compliance with state laws prohibiting discrimination and mandates the use of HUBs for projects with estimates of $100,000 or more, requiring a HUB Subcontracting Plan. Bidders must adhere to specific submission procedures, and proposals will be publicly opened, with only successful bids read aloud. The contract will not be awarded to debarred entities, and conditional bids are not accepted. The project aims to ensure quality work in accordance with the provided specifications and conditions, with the Texas Transportation Commission reserving the right to reject any or all proposals. For further details or support, contact Vanessa Garcia at the provided email or phone number.

General Info

Agency

Texas Department of Transportation

NAICS

315210 - Cut and Sew Apparel Contractors

Place of Performance

TX, USA

Set-Aside

NONE

Documents

Project 121859-24-02: Roof Rehabilitation, East Harris AEM

rfb

High

TxDOT HUB Subcontracting Plan (HSP) Instructions

supporting-documents

High

TxDOT Uniform General Conditions (Revision 09/01/2022)

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 1

Solicitation

Response DeadlineJul 3

Deadline has passed

Submission Closed

07/03/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas Department of Transportation

Contacts1 person available

OfficeN/A

Organization / AgencyTexas Department of Transportation

Office AddressN/A

Contacts

Vanessa Garcia

contact@example.gov

+1 (555) 000-0000

Full Description

NOTICE TO CONTRACTORS FOR (TXDOT) ROOF REHABILITATION, EAST HARRIS AEM LOCATION: 7303 MESA ROAD PROJECT ID #: 121859-24-02 CITY/ST: HOUSTON, TEXAS 77028 DISTRICT: HOUSTON COUNTY: HARRIS ESTIMATED COST: $280,000.00 BID GUARANTY/BID BOND: $6,000.00 PRE-BID MEETING: *MANDATORY* MAY 28, 2024 @ 11:00 AM CT PRE-BID ADDRESS: 7303 MESA ROAD, HOUSTON, TX 77028 SITE VISIT: *MANDATORY* MAY 28, 2024 @ 12:00 PM CT RFI QUESTIONS DUE: JUNE 3, 2024 BID DATE: JULY 3, 2024 @ 1:00 PM CT BID LOCATION: TxDOT STATE HEADQUARTERS 6230 EAST STASSNEY LANE, AUSTIN, TEXAS 78744 PROPOSAL DOCUMENTS for this project are included with this advertisement. Package 1 Contract Documents MUST BE RETURNED AS YOUR PROPOSAL Package 2 Standard Conditions, information only, does not need to be returned Package 3 Specifications, information only, does not need to be returned Package 4 Third-Party Ethics Training, information only, does not need to be returned Package 5 HUB Instructions, information only, does not need to be returned See INSTRUCTIONS TO BIDDERS document in Proposal Package 1 (Contract Documents) for instructions regarding Pre-Bid Meeting, Requests for Information, Proposal Delivery, Bid Letting, and other information. **NOTICE** Beginning September 1st, 2023, all bidders on facility projects will be required to register with txdot.BonfireHub.com and all bids will be submitted via Bonfire ONLY. For more instructions to register, go here: https://vendorsupport.gobonfire.com/hc/en-us For support with Bonfire, go here: https://vendorsupport.gobonfire.com/hc/en-us/requests/new Pre-qualification of contractors on facility contracts is waived; however, the Uniform General Conditions included in each proposal document outlines specific requirements for contract award. Furthermore, if the project estimate and/or contractor's estimate is greater than or equal to $100,000, the use of Historically Underutilized Businesses (HUBs) is mandated and a HUB Subcontracting Plan (HSP) is required and must be submitted with proposal package. All submitted bids will be publicly opened, only successful bids will be read. It is the bidder’s responsibility to ensure that the proposal (required documents) arrives at the above location and in the hands of the letting official, by the specified bid date / time deadline regardless of the method chosen by the bidder for delivery. The contract for this work will not be awarded to any contractor, firm or subcontractor currently debarred from bidding on Texas Department of Transportation projects. Usual rights reserved. Bidders are cautioned to study carefully the Standard Conditions documents for compliance with these requirements. The right is reserved by the Texas Transportation Commission to reject any and all proposals. Contractor must bid all Bid Items as called for on the plans and in the specifications. All bids received will be retained by the Texas Department of Transportation and will not be returned to bidders. Conditional bids will not be considered. The Texas Department of Transportation hereby notifies all bidders that the applicable State Laws prohibiting discriminatory practices in bidding and awarding this work will be strictly adhered to. End of Notice