Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

RFI for Network Time Synchronization System (ISF Data Center)

Active
PANMCC-26-P-0000_052707Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Sources Sought Notice, issued by the Department of Defense under solicitation PANMCC-26-P-0000_052707, is for information and planning purposes regarding the acquisition of five Safran SecureSync 2400 Master Clock and Time Synchronization chassis. The requirement includes all necessary peripheral hardware such as outdoor GNSS antennas, mounting kits, lightning surge protectors, grounding kits, low-loss RF cabling, and SFP transceiver modules. The system will be utilized at the White Sands Missile Range in New Mexico to distribute highly accurate time across local and wide-area networks using NTP and PTP. The required hardware must support multiple GNSS constellations, including GPS L1, GLONASS L1, Galileo E1, and BeiDou B1, and feature an Oven Controlled Crystal Oscillator for timing holdover during signal interruptions. Technical specifications require microsecond-level time distribution, modular card slots, Type-N connector RF compatibility, and 1Gb SFP fiber optic interfaces for integration into tactical telemetry networks. This notice is not a formal request for quotes or proposals, and interested parties should monitor sam.gov for any future solicitations.

General Info

DoD seeks five Safran SecureSync 2400 Master Clocks for White Sands Missile Range.

Agency

Department Of Defense → W6QM Micc-Fdo Ft HoodView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

White Sands Missile Range, NM, USA

Set-Aside

NONE

Documents

(1)

PD_ATEC+WSMR+ISF+Safran+NTP.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Fdo Ft Hood
Contacts2 people available
OfficeFORT HOOD, TX, 76544, USA
Organization / Agency
Department Of Defense → W6QM Micc-Fdo Ft Hood
View Agency Profile
Office AddressFORT HOOD, TX, 76544, USA

Full Description

Show more

THIS IS A Sources Sought Notice ONLY. The U.S. Government desires for information and planning purposes – it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to the sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued.  If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry (GPE), sam.gov.  It is the responsibility of potential offerors to monitor the GPE for additional information pertaining to this requirement.  This acquisition is for five (5) Safran SecureSync 2400 Master Clock and Time Synchronization chassis along with all necessary peripheral hardware (outdoor GNSS antennas, mounting kits, lightning surge protectors, grounding kits, low-loss RF cabling, and SFP transceiver modules). The system is a hardware-based Network Time Protocol (NTP) appliance that leverages Global Navigation Satellite System (GNSS) signals to distribute highly accurate, synchronized time across local and wide-area networks.


  • Precision Timing Sync: The system must provide microsecond-level time distribution across the IP network using NTP and Precision Time Protocol (PTP / IEEE 1588-2008).
  • Multi-GNSS Constellation Support: Hardware must be capable of tracking multiple satellite systems, including GPS L1, GLONASS L1, Galileo E1, and BeiDou B1, to ensure timing resilience.
  • Internal Oscillator Stability: Must include an Oven Controlled Crystal Oscillator (OCXO) to maintain reliable internal timing ("holdover") in the event of active GNSS signal interruption.
  • Physical Interface Integration: Must feature modular card slots, Type-N connector RF compatibility, and fiber optic 1Gb SFP interface compatibility to tie directly into existing WSMR tactical telemetry networks.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QM Micc-Fdo Ft Hood

Same awarding agency

NAICS: 236220
New
Federal
Renovate Women's Center to Conference Center
Solicitation # W91151-26-B-A008
The Mission and Installation Contracting Command (MICC) Fort Hood is soliciting a firm fixed price construction contract to renovate the Women's Center at Building 36000, located at the intersection of Wratten Drive and Shoemaker Lane, Fort Hood, Texas, into a Conference Center. The project involves interior demolition and reconfiguration to accommodate administrative and conference room requirements, as well as miscellaneous site work to meet code requirements. This acquisition is a 100% set-aside for Certified Women Owned Small Businesses under NAICS 236220, with an estimated procurement magnitude between 1,000,000 and 5,000,000 dollars. The performance period is scheduled for 390 days after the contract award. Bids must be submitted in sealed hard copy format to the MICC Fort Hood Contracting Office by 10:00 AM local time on August 31, 2026. A bid guarantee of at least 20% of the bid price, not to exceed 3 million dollars, is required, and performance and payment bonds must equal 100% of the original contract price. Award will be based on a trade-off process, though evaluation is primarily price-driven. The contractor is required to provide qualified key personnel, including a Project Manager, Superintendent, and a Quality Control Manager with specific USACE and OSHA certifications. All work must comply with applicable federal, state, and local laws, as well as specific safety standards such as COE EM 385-1-1 and various ASTM and ASME standards. Invoicing shall be processed electronically through the Wide Area WorkFlow (WAWF) system.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 236220
New
Federal
Building 36000 2nd Floor Reconfiguration to Conference Space
Solicitation # W91151-26-B-A009
The Mission and Installation Contracting Command (MICC) Fort Hood is soliciting an Invitation for Bids (IFB) for a firm fixed price construction contract to reconfigure the second floor of Building 36000 into a conference room suite. Located at the intersection of Wratten Drive and Shoemaker Lane at Fort Hood, Texas, the project involves the demolition and construction of walls and doors, installation of electrical power and lighting, mechanical ductwork, plumbing fixtures, and adjustments to fire suppression, alarm, and mass notification systems. The procurement is 100% set aside for Certified Women Owned Small Businesses under NAICS 236220, with an estimated magnitude between $1,000,000 and $5,000,000. The performance period is scheduled from September 30, 2026, to August 6, 2027, with a total duration of 300 days after award. Bidders must be registered in the System for Award Management (SAM) and submit physical, sealed bids by 11:00 AM on August 31, 2026. A bid guarantee of at least 20% of the bid price, not to exceed $3 million, is required, along with performance and payment bonds totaling 100% of the original contract price. The contractor must provide all necessary supervision, labor, and materials, ensuring compliance with Texas wage determinations and federal construction standards. Key requirements include the designation of a Quality Control Manager who must have completed the U.S. Army Corps of Engineers Quality Control Course and hold a 30-hour OSHA certification. Security protocols are stringent, requiring personnel to undergo NCIC-III and TSDB adjudication, complete Level I OPSEC training within 30 days of award, and utilize the E-Verify Program. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Final inspection and acceptance will be conducted by the Government at the destination site in Fort Hood, Texas.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 541611
Federal
Quality Control Documentation and Submittal ManagementThe contract entitled Quality Control Documentation and Submittal Management requires the compilation, coordination, and timely submission of all necessary quality control documentation for a Department of Defense project located at Fort Hood, Texas. This includes generating and organizing shop drawings, product data sheets, test reports, certification documents, operation and maintenance manuals, and all closeout submittals to ensure compliance with project specifications and regulatory requirements. The work involves meticulous documentation management to support construction or facility execution phases, with an emphasis on accuracy, completeness, and adherence to timelines and industry standards. This is a subcontract opportunity set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, with a NAICS code of 541611 indicating it pertains to engineering services. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and is managed by the W6QM Micc-Fdo Ft Hood office under the Department of Defense. Performance of the contracted work is required at Fort Hood, Texas, with a zip code of 76544, and the successful offeror must demonstrate capability to handle complex documentation workflows and deliverables critical to project closure and certification.
Administrative Management and General Management Consulting Services

POSTED

13 days ago

DEADLINE

in 18 days
View Details
NAICS: 238390
Federal
Painting and Coatings ApplicationThe contract seeks qualified contractors to perform priming, painting, and finishing services on walls and ceilings at Fort Hood, Texas, using materials provided or approved by the government, with strict adherence to color matching requirements based on physical samples. All work must comply with federal standards and be executed using only government-furnished or pre-approved paints and coatings to ensure consistency and quality across installations. The effort is structured as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside, targeting businesses certified under the WOSB program as defined in FAR 19.15, with the NAICS code 238390 indicating specialized construction activities related to painting and coating. The opportunity was posted on July 31, 2026, with a response deadline of August 31, 2026, at 4:00 PM local time. Performance is to be conducted at Fort Hood, zip code 76544, under the oversight of the Department of Defense through the W6QM Micc-Fdo Ft Hood office. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal linked in the posting. The contract emphasizes compliance with government material specifications, exact color reproduction through physical samples, and adherence to WOSB certification eligibility criteria, making it exclusively available to small businesses owned and controlled by women who meet SBA certification requirements.
Other Building Finishing Contractors

POSTED

13 days ago

DEADLINE

in 18 days
View Details