Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RFI Tactical RF Direction Finding System DUE: 28 OCT 2011

Active
N65236_SNOTE_0002999EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

SPAWAR System Center Atlantic is seeking information on prototype tactical radio frequency (RF) direction finding (DF) systems capable of passively determining a line of bearing to an RF source within the 20 MHz to 3 GHz range. The system must support multiple operational modes, including mobile operations on vehicles, man-wearable use during movement, and man-packable use from stationary positions. It should function reliably across a range of environmental conditions including wide temperature extremes (-40°C to +60°C non-operating, 0°C to +50°C operating with an objective to expand this range), humidity from 5% to 95% non-condensing, altitudes up to 15,000 feet, and resist shocks and vibrations as specified. Weight shall not exceed 20 lbs excluding mounting and power sources, with power consumption capped at 20 watts. The system must provide high accuracy direction finding at varying distances, capable of detecting signals transmitting 0.3 W at 1k, 3k, and 5k line-of-sight distances with RMS accuracy thresholds of 6°, 8°, and 12° respectively, and maintain performance in field strengths of 10 V/m or greater. The DF system requires resistance to electromagnetic interference adhering to MIL-STD 461E standards and must have a concealable or camouflaged profile with antenna size constraints. It should easily interface with laptops via TCP/IP, RS-232, and/or USB for configuration and data acquisition, and be capable of initiating measurements rapidly within 100 ms of an external trigger. Key features also include simultaneous listen-through and direction finding, electronic compass for orientation, GPS and DGPS location and time synchronization, and internal storage for at least 100 time-stamped lines of bearing. The receiver subsystem should support scanning at least 40 channels per second (objective of 1 GHz per second), multiple modulation types (CW, SSB, FM, AM), bandwidth options, and a dynamic signal range of 75 dB or more. The processor should integrate up to 30 measurements for accuracy enhancement and provide Built-in-Test diagnostics at the card or interface level. Interested suppliers are asked to submit detailed product design descriptions along with company details and product maturity level by the October 28, 2011 deadline, with this request serving solely to gather technical information for planning purposes without commitment from the government.

General Info

SPAWAR seeks prototype tactical RF direction finding system, multi-mode, lightweight, accurate, and environmentally resilient.

Agency

Department Of Defense → Niwc Atlantic

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

SC

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Niwc Atlantic
ContactsNo contacts available
OfficeNORTH CHARLESTON, SC, 29419-9022, USA
Organization / AgencyDepartment Of Defense → Niwc Atlantic
Office AddressNORTH CHARLESTON, SC, 29419-9022, USA
ContactsNo contact information available

Full Description

Show more
RESPONSES ARE DUE 2:00 P.M. (EDT) 28 OCT 2011 Request for Information Tactical RF Direction Finding System SPAWAR System Center Atlantic is seeking information on prototype tactical direction finding (DF) systems. Concept is a system that shall passively determine a line of bearing (LOB) to a radio frequency (RF) energy source in the 20 MHz to 3 GHz range. Supplier shall be able to provide sound design concepts for the DF capability including the following requirements. 1. The DF system shall support mobile operations. System shall operate on-the-move on both indigenous and military vehicles. 2. The system shall be man wearable and support DF on-the-march operations. 3. The system shall support man packable operations. DF system will be man packed and used from halted positions. 4. The DF system shall withstand operating temperatures from 0 degrees C to +50 degrees C. 5. As an objective, the DF system shall operate over a temperature range of -10 degrees to 55 degrees C. 6. The DF system shall withstand non-operating temperatures from -40 degrees C to +60 degrees C. 7. The DF system shall withstand non-condensing humidity from 5 % to 95%. 8. The DF system shall operate from sea level to 15,000 feet. 9. The DF system shall operate with shocks to 2.5g, 11ms, sine. 10. The DF system shall withstand non-operating shocks to 10g, 11ms, sine. 11. The DF system shall withstand operating vibrations up to 2 grms, 5-500 Hz random. 12. The DF system shall support a DC power from a range of 10 40 volts. 13. The DF system shall provide RMS accuracy not exceeding 6 degrees for a 1 second duration signal at any one frequency transmitting at .300 W from a distance of 1k line-of-sight. 14. The DF system shall provide RMS accuracy not exceeding 8 degrees for a 1 second duration signal at any one frequency transmitting at .300 W from a distance of 3k line-of-sight. 15. The DF system shall provide RMS accuracy not exceeding 12 degrees for a 1 second duration signal at any one frequency transmitting at .300 W from a distance of 5k line-of-sight. 16. The DF system shall achieve specified accuracy when the field strength is 10V/m or greater. 17. The DF system shall be resistant to externally generated radio frequency interference (RFI) IAW with MIL-STD 461E, tests CE102, CE106, CS101, CS103, CS114, CS115, CS116, RE102, and RS103. 18. The DF system shall have a profile that is concealable or can be camouflaged. 19. The DF system weight shall not exceed 20 lbs, exclusive of mounting apparatus, masts or power source. 20. The DF system power requirement shall not exceed 20 watts when fully operational. 21. The DF system shall support configuration and data acquisition with a laptop computer via a TCP/IP connection. 22. The DF system shall support configuration and data acquisition via a RS-232 and/or USB interface. 23. The DF system shall be able to initiate a DF measurement within 100 ms from an external tip-off. 24. The DF system shall provide listen through capability simultaneously with DF measurements. 25. The DF system shall include an electronic compass for orientation calibration. 26. The DF system shall include GPS location capability and time synchronization. 27. The DF system shall support Differential Global Positioning System (DGPS) location capability. 28. Antenna size shall not exceed 18.0 inches in diameter and 18 inches in height. 29. The DF receiver subsystem shall support a scan rate of at least 40 channels per second. 30. As an objective, the DF receiver subsystem shall support a search rate of at least 1 GHz per second. 31. The DF receiver subsystem shall support CW, SSB, FM and AM signal types. 32. The DF receiver subsystem shall be capable of hosting alternative signal types with the primary focus on simple signals and an objective to include digital modulated signals. 33. The DF receiver subsystem shall support bandwidths of 0.5, 3, 6, 15, 50, 200 kHz 34. The DF receiver subsystem shall support a signal dynamic range of 75 dB or more. 35. The DF processor subsystem shall be able to integrate separate measurements, up to at least 30, for enhanced accuracy. 36. The DF system shall provide internal storage for a minimum of 100 lines-of-bearings with time stamps. 37. The DF system measurements shall be formatted to support geolocation with measurement from additional DF subsystems. 38. The DF system shall provide Built-in-Test (BIT) to the card or interface level. Specific information sought includes: 1. Detailed product design description 2. Company information, including name, address, and URL. 3. A point of contact for follow-up information, include contacts phone number and e-mail address. 4. Product Maturity Level. Submittals Send your technical questions to the technical point of contact Jeff Lumb at contact@example.gov. This RFI is for information gathering and planning purposes only, and should not be construed as a Request for Proposal (RFP) or solicitation of an offer. The Government does not intend to award a contract on the basis of this RFI or otherwise pay for the information solicited. E-mail your non-technical, contract related questions to Ms. Paula Somers at contact@example.gov

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
CASE, OPTICAL INSTRU
Solicitation # SPE4A7-27-T-2370
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

32 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURG
Solicitation # SPE2DS-27-T-1106
Solicitation SPE2DS-27-T-1106 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of one box of absorbable surgical sutures. The required item is a natural plastic glycolide lactide copolymer, size 4-0, 27 inches in length, with a 3 1/2 circle and 36 sutures per box, identified by NSN 6515-01-604-1967. The product must have a non-extendable shelf life of 60 months. Delivery is required within 20 days after order, with the destination for both inspection and acceptance located at Fort Wainwright, Alaska. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires packaging in accordance with MIL-STD-2073-1E and DLA procurement standards. Bidders must specify the source and part number and provide a complete data package if proposing an alternate part. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. The acquisition falls under NAICS code 334511.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

32 minutes ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
NON-NSN ITEM
Solicitation # SPE4A6-27-T-7572
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

32 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-27-T-1786
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

32 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
NON-NSN ITEM
Solicitation # SPE4A6-27-T-7571
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

32 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
Federal
Repair and Overhaul of Control and Status Units (NSN 1680-01-582-7988)
Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
Automated Traffic Enforcement Trailer
Solicitation # W911S226U4411
Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.
W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
Federal
66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB18
This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
58--THERMAL IMAGING SYS
Solicitation # N0010426RQA81
Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm fixed price negotiated procurement for the manufacture of Thermal Imaging Systems under NSN 5855-01-499-1240. The government is seeking a single award based on the most advantageous offer, with past performance weighted as more important than price. The evaluation process utilizes the DoD Supplier Performance Risk System for quality ratings, and the government reserves the right to award to other than the lowest priced offer. Proposals must be submitted via NECO or email, and the current requested delivery date is 180 days after award. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with Buy American and Balance of Payments program certificates, and adherence to cybersecurity standards for covered defense information. Offerors must be authorized distributors of the original manufacturer to be considered for award.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334511
New
Federal
66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB19
Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.
Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334511
New
Federal
58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RQA79
Solicitation N0010426RQA79, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted negotiated request for proposal for the teardown, evaluation, repair, and modification of 41 Thermal Imaging Systems (NSN 5855-01-499-1240). The government contemplates the award of a firm-fixed-price contract with a requested delivery date of 180 days after award. All repair work must adhere to contractor standard practices and approved technical directives, with physical identification required per MIL-STD-130 and packaging conducted according to MIL-STD-2073. The contractor is responsible for all inspection and testing at the point of origin, maintaining records for 365 days post-delivery. Any critical or major design or material variances must be submitted via DCMA or SUSHPIP and approved through a formal contract modification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be authorized distributors of the original manufacturer and comply with various federal and defense acquisition regulations, including cybersecurity requirements for covered defense information and Buy American certifications.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334511
New
SLED
NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.
Dalton Utilities

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → Niwc Atlantic

Same awarding agency

NAICS: 611430
New
Federal
EMI/EMC Curriculum DeveloperThis subcontract opportunity with NIWC Atlantic under the Department of Defense seeks a curriculum developer to create and deliver technical training focused on Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC). The selected provider will be responsible for developing instructional materials and training modules tailored for prime contractors on Department of the Navy projects, utilizing e-learning platforms and specialized training software. The project requires deep subject matter expertise in E3 to ensure the delivery of high-quality curriculum and course materials. Performance will take place in Hanahan, and interested parties must respond by November 4, 2026. The work falls under NAICS code 611430, focusing on professional and management development training.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Environmental Test Laboratory ServicesThis subcontract for Environmental Test Laboratory Services supports NIWC Atlantic projects by providing physical environmental stress testing for C6ISR hardware. The scope of work includes conducting specialized tests for shock, vibration, altitude, salt fog, temperature, and humidity utilizing vibration tables, salt spray chambers, and environmental chambers. The selected provider is required to maintain ISO/IEC 17025 lab certification and must deliver formal Environmental Test Reports upon completion of the testing. The project is categorized under NAICS code 541380 and will be performed in Hanahan. Interested parties should note the response deadline of November 4, 2026, for this Department of Defense requirement.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
Federal
TEMPEST and Protected Distribution Systems (PDS) AuditorThis subcontract opportunity with NIWC Atlantic involves providing specialized security testing and inspections for prime contractors to prevent electromagnetic emanations. The selected provider will be responsible for conducting TEMPEST testing, surveys, and Protected Distribution Systems (PDS) inspections and certifications. These tasks require the use of TEMPEST-specific measurement equipment and the delivery of formal PDS Certification Reports and TEMPEST Survey Results. Qualified candidates must possess a Secret or Top Secret security clearance and demonstrate technical proficiency with IA PUB-5239-22 and CNSSI 7003 standards. The work is located in Hanahan and falls under NAICS code 541690. Interested parties must respond by November 4, 2026.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Antenna Pattern and Gain Testing SpecialistThis subcontract opportunity is for an Antenna Pattern and Gain Testing Specialist to support prime contractors on NIWC Atlantic projects within the Department of Defense. The selected provider will perform instrumented antenna testing at the Radio Frequency Test Facility in Hanahan, specifically conducting 2D antenna pattern and gain testing. The scope of work includes documenting capabilities across a 360-degree azimuth and 0 degrees elevation for both standalone and vehicle-mounted antennas, ensuring all activities strictly adhere to IEEE 149 standard test procedures. The primary deliverables for this engagement are comprehensive Antenna Pattern and Gain Documentation and Reports. This requirement falls under NAICS code 541380. Interested parties should note the response deadline of November 4, 2026, to provide the necessary technical expertise for these specialized radio frequency measurements.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
Federal
RF Modeling and Simulation EngineerThis subcontract opportunity for an RF Modeling and Simulation Engineer supports NIWC Atlantic E3 projects within the Department of Defense. The role involves performing theoretical analysis and software-based modeling to determine RADHAZ effects and predict radio frequency interference in complex environments. Utilizing tools such as MATLAB and the ANSYS Electromagnetic Interference Toolkit, the engineer will evaluate co-site coexistence RFI effects and develop necessary mitigating solutions. Key deliverables for this position include RADHAZ analyses, RFI prediction reports, and formal mitigation recommendations. The work is based in Hanahan and requires the personnel to hold either a Secret or Top Secret security clearance. Interested parties should note the response deadline of November 4, 2026.
Engineering Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
EMI/EMC Test and Evaluation SpecialistThis subcontract opportunity with NIWC Atlantic involves providing EMI and EMC testing and evaluation services for C6ISR systems projects. The selected specialist will be responsible for conducting instrumented surveys at USN and USMC activities, recording emitter output power and antenna correction factors, and performing certification testing for communication suites using specialized test and data reduction equipment. All final deliverables must be submitted as EMI/EMC Test Reports in accordance with DI-EMCS-80200C. The position is based in Hanahan and requires the personnel to hold a Common Access Card and a security clearance at the Confidential, Secret, or Top Secret level. Interested parties should note that the response deadline is November 4, 2026.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Market Survey for E3 Services Support of C6ISR Systems
Solicitation # N65236-26-RFPREQ-LSUBP00080-0002
The Naval Information Warfare Center, Atlantic (NIWC Atlantic) is conducting a market survey for a contract to provide Electromagnetic Environmental Effects (E3) Test, Evaluation, Training, and Range Services in support of C6ISR Systems. The anticipated scope of work includes testing electromagnetic radiation and spectrum effects, supporting the TEMPEST Program and Protected Distribution Systems inspections, and performing environmental testing such as shock, vibration, altitude, and temperature/humidity. The effort is aligned with the Navy's Information Dominance Roadmap for Electromagnetic Spectrum Usage and the Secretary of Defense's Electromagnetic Spectrum Superiority Strategy. The primary place of performance is at NIWC Atlantic, with potential travel to various CONUS and OCONUS locations. The government anticipates a five-year ordering period with an estimated value between 10 million and 50 million dollars, utilizing approximately 15 full-time equivalents per year. The contract is expected to be a firm-fixed price type for labor and calibration, with cost-reimbursement for materials and travel. Key requirements include adherence to IEEE 149 antenna test procedures, strict cybersecurity compliance, and the use of the DoD Wide Area Work Flow for invoicing. Contractors must maintain appropriate facilities, possess PKI client-side authentication capabilities, and comply with DFARS regulations regarding counterfeit electronic parts and government property management. Responses to this market survey are due by November 4, 2026.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
Federal
Notice of Intent to Sole Source - Economic Impact Assessment
Solicitation # N65236-26-SIMACQ-LBUSP00030-0034
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334111
New
Federal
N6523618D1001
Solicitation # N6523618D1001
The Naval Information Warfare Center Atlantic intends to extend the ordering period for contract N6523618D1101 by twelve months, moving the expiration date from December 6, 2026, to December 5, 2027. This extension, which maintains the current contract value, is designed to ensure the completion of ongoing task orders and maintain critical capabilities while a competitive follow-on contract is finalized. The government plans to negotiate this extension exclusively with DRS Advanced ISR, LLC, utilizing specific legal authorities to bypass competitive proposals. Interested parties wishing to provide evidence that competition would be advantageous must submit written comments to Kari Hill by 12:00 PM EST on November 13, 2026.
Electronic Computer Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
Federal
LIPTM00074, DHA/HSI IPT, 25-012 RUCKUS FOR JUST IN TIME FY25 LAN & MULTIPLE SITES- SEWP (C)This forecast involves the procurement of Ruckus equipment for Just In Time FY25 LAN requirements across multiple sites, managed by the Naval Information Warfare Systems Command Atlantic. The project, identified as LIPTM00074, is intended to support the Defense Health Agency and Health Service Integration Integrated Product Team. The performance of this contract is centered in North Charleston, and the acquisition process is being facilitated through the SEWP vehicle. Sean Johnson serves as the primary contracting officer and point of contact for this effort.

POSTED

11 days ago

DEADLINE

N/A
View Details
Federal
LIPTM00006_North American Aerospace Defense Command (NORAD) NORTHCOM_Audiovisual Material_SEWP (C)

POSTED

11 days ago

DEADLINE

N/A
View Details
NAICS: 334118
Federal
LIPTM00468, NISE, MORT (TT-25-001), SEWP (C)This forecast involves the procurement of OPTIA COTS-rugged 556 Ammo Can Servers, manufactured by United Computer Products, Co., Inc. under part number A55399E83NN. These specialized servers are designed for rugged environments and are currently utilized by the U.S. Marine Corps. The acquisition is being managed by the Naval Information Warfare Systems through Niwc Atlantic, with the place of performance located in Charleston. The opportunity is categorized under NAICS code 334118 and is associated with the LIPTM00468, NISE, MORT, and SEWP programs. Bridgette Clayton serves as the primary Contracting Officer, supported by Kimberly Z. Young as the secondary point of contact. The forecast was posted on October 18, 2026, as part of a long range acquisition estimate.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

11 days ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334511
Awarded
Federal
J&A
Solicitation # N6833511C0211
Navair Warfare Ctr Aircraft Division

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
J&A
Solicitation # N6833511C0221
Navair Warfare Ctr Aircraft Division

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
CELL ASSEMBLY, OPTIC
Solicitation # SPM7M911R0032

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
USNS JOHN ERICSSON NAVIGATION SYS
Solicitation # N40442-11-T-7723
Military Sealift Flt Supp Command Norf

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
AN/ALQ-165 Airborne Self- Protection Jammer/ Traveling Wave Tube
Solicitation # 20033-11
Naval Air Systems Command

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
59--Electrical & Elct Boards, Cards & Asscted Hrdwre
Solicitation # SPRBL110R0038
DLA Land At Aberdeen

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Federal
20--Notice of Intent to Award a Sole Source Contract
Solicitation # W912EQ-11-S-0008
W07V Endist Memphis

POSTED

about 15 years ago

DEADLINE

N/A
View Details
NAICS: 334511
Awarded
Federal
58--Communication, Detection, and Coherent Radiation Equipment
Solicitation # FA8522-11-R-32338

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
58-- QTY OF 1 AUTONOMY SYSTEM AND TWO (2) STEERING RINGS
Solicitation # N6339411T5107
Commanding Officer

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
60--AN/USQ 82(V) Gigabit Ethernet Data Multiplex System (GEDMS)
Solicitation # N0017811R2008
Nswc Dahlgren

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Awarded
Federal
59--Electrical and Electronic Equipment Components
Solicitation # FA8522-11-R-33855

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334511
Closed
Federal
99--Global Navigational Satellite System (GNSS) 3 Survey Sets Includes: Receiver, antenna, and data link radio, prower in Real-Time Kinematic (RTK) engine. Response Date closes on 9/23/11 9:00am Hawaii Standard Time (HST).
Solicitation # W912CN11T0687
0413 Aq Hq Rco-Hi

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS