Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

RFP-1948801 - Drone Program

Active

754State & Local

Response Deadline09/08/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Dallas County Hospital District Police Department is seeking to acquire two drone units under solicitation number 754, titled RFP-1948801 - Drone Program, issued by Parkland Health and Hospital System in Texas. The solicitation was posted on August 6, 2026, with a response deadline set for September 8, 2026, and is open for bids without any specific set-aside classifications. The drones are intended for operational use by the hospital district’s police force, likely to enhance surveillance, emergency response, and situational awareness capabilities across hospital premises and surrounding areas. All proposals must be submitted through the designated supplier portal, and inquiries should be directed to the primary point of contact, Gracy Thomas, or the secondary contact, Terence Durham, via their provided email addresses. The place of performance and precise location details are not specified in the documentation, but the equipment must be delivered and operational within the jurisdiction served by the hospital district.

General Info

Dallas County Hospital District seeks two drones for police use, bids due September 8, 2026, via supplier portal.

Agency

Texas → Parkland Health and Hospital SystemView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(8)

RFP-1948801 Exhibit B.3 Potential MWBE Subcontractors

XLSX•other

RFP-1948801 Exhibit A Contract for Services - Drone Program

DOCX•contract-document

RFP-1948801 Exhibit D Pricing Schedule - Drone Program

XLSX•pricing-schedule

RFP-1948801 Exhibit B.2 Good Faith Effort Form

DOCX•good-faith-effort-form

RFP-1948801 Exhibit B.1 Letter of Intent for M/WBE Subcontractors

DOCX•letter-of-intent

RFP-1948801 Exhibit C - IT Security Requirements v8.1.2025

DOCX•sow

RFP-1948801 Drone Program for Dallas County Hospital District

DOCX•rfp

RFP-1948801 Exhibit B Prime Participation Plan Report

DOCX•prime-participation-plan

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedAug 6

Solicitation

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Parkland Health and Hospital System

Contacts2 people available

OfficeN/A

Organization / Agency

Texas → Parkland Health and Hospital System

View Agency Profile

Office AddressN/A

Contacts

Gracy Thomas

contact@example.gov

Terence Durham

contact@example.gov

Full Description

Show more

Purchase of two (2)Drone units (Program) for the Dallas County Hospital District Police Department (DCHDPD)

Similar Contracts

Same NAICS industry code

Gravimetric Verification and Barcode Scanning Integration

249-NETWORK Contract Office 9 (36C249)

POSTED

about 21 hours ago

DEADLINE

Optical Atomic Clock System Supply and Integration

Department Of Commerce Nist

POSTED

about 21 hours ago

DEADLINE

Custom CTA Module Design and Fabrication

NASA Shared Services Center

POSTED

about 21 hours ago

DEADLINE

High-Reliability PCIe Multifunction I/O Board Supply

FA8579 Software Sprt Afsc Pzim

POSTED

about 21 hours ago

DEADLINE

New Manufacture of Computer/Spoiler (NSN 6615-01-036-3198, P/N 4030470-903)The contract outlines the manufacture and qualification of the Computer/Spoiler component designated as NSN 6615-01-036-3198 with part number 4030470-903 for the B-001B platform. The work encompasses full production lifecycle activities including technical data collection, submission of a System Acceptance Report, and adherence to rigorous quality requirements specified in MQR-PSD-1 and AS9100 standards. This effort is critical to ensuring the component meets all performance, reliability, and safety criteria for its intended military application. The contract type is classified as a subcontract under the North American Industry Classification System code 334511, indicating it involves the manufacturing of electronic components and equipment. The solicitation was posted on August 7, 2026, with a firm response deadline of August 15, 2026, at 4:59 a.m. The procuring agency is the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, and the work is to be performed wherever the selected subcontractor operates, with no specific geographic restrictions listed. Compliance with all applicable quality and documentation standards is mandatory, and failure to meet these requirements may result in rejection of the bid or non-compliance penalties. The contract seeks a qualified manufacturer capable of delivering a fully qualified, production-ready component in alignment with defense sector expectations.

Ok DLA Aviation At Oklahoma City

POSTED

about 21 hours ago

DEADLINE

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RPC65

The contract pertains to the acquisition of a flight-critical antenna component under NSN 7R-5985-015686919-E8, with a quantity of four units to be delivered FOB origin. Due to the unique design capability, proprietary manufacturing knowledge, and specialized technical data held exclusively by previously approved sources, procurement is restricted to those entities previously vetted and authorized by the Government. The item requires formal engineering source approval prior to contract award, as the available technical data is insufficient to support full and open competition, and the qualification of any new supplier would take longer than the timeline allows. Only preapproved sources have been solicited, and any entity not currently approved must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on the nature of their proposed involvement. Failure to provide complete and accurate information as specified will result in disqualification from consideration. Requests for source approval already under evaluation at NAVSUP WSS must include a copy of the original submission cover letter. The Government is pursuing this acquisition under FAR 6.302-1, allowing sole-source negotiation due to the absence of qualified alternate suppliers and the critical nature of the component. While the notice is not a request for competitive proposals, all responsible parties may submit capability statements within 45 days of the publication date, or 30 days if under an existing Basic Ordering Agreement. Offers must conform strictly to the source approval requirements, and the Government retains full discretion to proceed without competition based on operational needs and market assessments. Commercial item acquisition policies under FAR Part 12 are not being applied, but interested vendors may still declare if they can meet the requirement with a commercial item within 15 days. Technical specifications and associated documents may be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not stocked there. Proposals must be directed to the designated point of contact, Chris Campellone, and submitted prior to the September 21, 2026 deadline.

Navsup Weapon Systems Support

POSTED

about 21 hours ago

DEADLINE

in about 1 month

ACCELEROMETER,MECHA

Solicitation # N0010426QNE28

This contract solicits repair services for specific naval components including the TOWED ARRAY SONAR, ADAPTER ASSEMBLY IN, ACCELEROMETER MECHA, CIRCUIT CARD ASSEMBLY, and RECEIVING SET SONAR, each identified by their respective NSNs and reference numbers. All repairs must adhere strictly to military standards such as MIL-STD-129 and MIL-STD-130 for marking and identification, and require full compliance with electrostatic discharge controls for circuit cards. Contractors must be authorized distributors of the original manufacturer and hold an active U.S. security clearance in accordance with DD Form 254 due to the controlled technical data involved. Repairs must eliminate all metallic mercury contamination, and any use of mercury requires prior written government approval with accompanying warning labels. The contract mandates Government-Source Inspection and Acceptance, and all repair records must be retained for 365 days after final delivery. The repair turnaround time is set at 375 days measured from physical receipt of the asset at the contractor's facility as recorded in the Commercial Asset Visibility system. Proposals must include firm-fixed pricing for both repair and Beyond Repair scenarios, along with throughput capacity per month and the original procurement cost of the item. Substitutions or design changes require written government authorization and must be classified under specific code designations. The contract includes an option to increase the order quantity by up to 100% within 468 days of award at the same contracted price. All submissions must be sent exclusively via email to Rachel E. Kern, and the acquisition is conducted under emergency flexibility authorities with induction expiration 120 days after award. Packaging must comply with MIL-STD-2073, and all subcontractors are bound by the same requirements regarding mercury, security, and quality control.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Second Industry Day Announcement: Low Profile Mast (LPM) Program

Solicitation # N00024-26-R-6215A

The U.S. Navy, through the Direct Reporting Portfolio Manager for Submarines and the Submarine Electromagnetic Systems Program Office, is hosting a second Industry Day on September 3, 2026, to engage with industry partners on the Low Profile Mast (LPM) program. This event aims to accelerate acquisition by utilizing the Other Transaction Authority (OTA) pathway under Title 10 U.S.C. § 4022, encouraging innovation from both traditional and nontraditional defense companies. Participants will receive an update on refined technical requirements, an overview of the anticipated acquisition timeline, and clarification on the OTA process prior to the formal Request for Prototype Proposal release. The event will be held in-person and virtually in the Washington, D.C. area, with registration closing on August 21, 2026, and limited to two in-person participants per company. Attendance is restricted to companies registered in the United States, United Kingdom, or Australia, and all participants must be pre-approved with submitted individual credentials for facility access. The event will operate at the UNCLASSIFIED – Controlled Unclassified Information level, with no recording allowed and no hard-copy materials distributed; post-event materials will be shared via DoD SAFE. Registration requires valid CAGE or NCAGE numbers and submission of individual participant details including name, affiliation, contact information, and citizenship for security screening. A formal calendar invite with virtual access details will be sent only to approved registrants, with no teleconference option available. Questions on draft technical requirements must be submitted in writing by August 21, 2025, to the designated points of contact. This announcement is purely informational and does not constitute a solicitation or obligation to award contracts; any future formal solicitation will be issued through SAM.gov, and all costs associated with participation or submissions remain the responsibility of the respondents.

POSTED

about 21 hours ago

DEADLINE

HYDROPHONE MOUNT

Solicitation # SPRMM126QKG98

The contract pertains to the manufacture and delivery of a HYDROPHONE MOUNT under solicitation SPRMM126QKG98, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with performance requirements centered on strict adherence to specified engineering drawings, military standards, and quality systems. The item must conform to drawing 732-18-DL001 and associated revisions, with full configuration control governed by MIL-STD-973, requiring all engineering changes, deviations, or waivers to be formally submitted and approved by the Contracting Officer. Quality assurance mandates compliance with ISO 9001, and the contractor is responsible for all inspections unless otherwise directed, with the government retaining the right to conduct independent verification. Packaging and marking must meet MIL-STD-129 and MIL-STD-2073, and the product must be entirely free of metallic mercury and mercury contamination, with any exception requiring prior written approval and the inclusion of a warning plate identifying the hazardous component. Refurbished materials are prohibited, and distributors must clearly identify the original equipment manufacturer’s CAGE code and part number. The award will be made using the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability based on conformity to documented requirements. All contractual documentation must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) and its Wide Area Workflow (WAWF) system for invoices and receiving reports. Contractors must register for access to EDA and may obtain controlled drawings via SAM.gov as designated data custodians. The procurement is subject to the Mandatory Use of WFP Mod Assist Module and requires compliance with CMMC Level 1 self-certification for cybersecurity maturity. Small business representations and certifications are binding, and the contract is set aside for small businesses under a specific federal set-aside policy. Delivery dates and offer validity are left blank, indicating flexibility or pending determination. Communication must be conducted through a designated email point of contact, and vendor notifications regarding contract actions are advised via NAVSUP WSS Mechanicsburg. Any unauthorized changes to production facilities are prohibited unless approved in writing with a $250 administrative cost reduction attached, and all subcontractors must be held to the same mercury-free and quality compliance obligations. The contract emphasizes traceability, documentation retention for four years post-delivery, and strict enforcement of defense procurement regulations.

SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

58--SLAT ASSEMBLY, LBTX

Solicitation # SPRMM126RRA53

SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

Advanced Electronic Warfare (ADVEW) Support

Solicitation # N00019-26-SIMACQ-TPM272-0236

The Naval Air Systems Command at NAS Patuxent River, Maryland, plans to issue a sole-source contract modification to BAE Systems in Nashua, New Hampshire, under Basic Order Agreement N00019-22-G-0009 and delivery order N00019-24-F-0125 to secure technical support for integrating the AN/ALE-55 Electronic Frequency Converter, Fiber-Optic Towed Decoy, and Dual Band Decoy with the Advanced Electronic Warfare system. This procurement is justified under Title 10 U.S.C. 3204(a)(1) and FAR 6.302-1, as BAE Systems is the only responsible source capable of meeting the government’s requirements, with no alternative suppliers available. The action is not open for competitive bidding, and the intent notice serves only to inform potential parties of the planned action and allow for the submission of interest or capability statements, which will be reviewed at the government’s sole discretion to determine if a competitive process should be pursued. Responses must be submitted in writing via email to Kathleen Erickson or Jessica Guy-Dietrich by the deadline of August 22, 2026, and no phone inquiries will be accepted. The procurement is categorized as a presolicitation under NAICS code 334511 with no set-aside provisions, and performance will occur in New Hampshire though the contracting office is located in Maryland. Companies seeking subcontracting opportunities should contact BAE Systems’ Contracts Manager Bryan Dufour directly. The government retains full authority to proceed with the sole-source award regardless of any responses received, and this notice does not constitute a solicitation or commitment to award.

Naval Air Systems Command

POSTED

about 21 hours ago

DEADLINE

Expeditionary Unmanned Aerial System (eUAS) Manufacturing and Employment Capability Request for Information

Solicitation # RSO-AMPOECT-04

The U.S. Air Force Rapid Sustainment Office has issued a Capability Request for Information (CRFI) under RSO-AMPOECT-04 to explore market capabilities for an expeditionary unmanned aerial system (eUAS) manufacturing and employment solution tailored for austere, forward-deployed environments. This initiative seeks to enable rapid, on-demand production of attritable UASs, first-person view drone kits, counter-UAS interceptors, spare parts, and accessories using mobile, transportable manufacturing systems that reduce dependency on traditional supply chains. The system must be drone-agnostic, compatible with open architecture standards such as Modular Open Systems Approach (MOSA), and capable of ingesting standard file formats like STEP, STL, and 3MF locally. It must fit within an ISO container or ISU-90 footprint, be transportable via tactical and strategic airlift assets—including C-130s and helicopter sling-loads—and withstand extreme environmental conditions from -40°F to 125°F with MIL-STD-810-equivalent dust and water resistance. Power must be compatible with standard military generators or tactical microgrids, supported by an industrial-grade uninterruptible power supply, and the system must comply with NFPA 70 hazardous location standards for volatile materials. Technical requirements include hardware-encrypted local storage compliant with FIPS 140-2/3, full integration of the Department of Defense Risk Management Framework (DoDI 8510.01), and strict adherence to NDAA FY2020 Section 848 and DCMA Blue List architecture, excluding all components, software, or raw materials from covered nations including China, Russia, Iran, and North Korea. Offerors must demonstrate current Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL), experience in rapid UAS manufacturing under austere conditions, compact design optimization, power interoperability across international and off-grid sources, and intuitive operator interfaces. Submissions are limited to an 11-page white paper—one page for business information including CAGE code, UEI, small business status, and Buy American Act compliance plan, and ten pages detailing technical approach, experience, and compliance with all specified requirements. Responses must be sent electronically to aflcmc.rod.ect@us.af.mil no later than 30 calendar days after the CRFI’s posting to SAM.gov, with no verbal inquiries accepted and no reimbursement for response costs. Proprietary information must

FA8684 Aflcmc Rodk

POSTED

about 21 hours ago

DEADLINE

More opportunities from Texas → Parkland Health and Hospital System

Same awarding agency

Solicitation # 764

Parkland Health and Hospital System in Texas has issued a solicitation for newspaper advertising services under reference number REQ 2015413 and solicitation number 764. The solicitation was posted on August 7, 2026, with a response deadline of August 24, 2026, indicating a window of approximately seventeen days for vendors to submit proposals. The contract is categorized as a local procurement with no specific set aside provisions or NAICS code assigned. The advertising services are intended to support the agency’s communication and outreach initiatives, with performance expected to occur within Texas, though no specific city or zip code is designated for performance. All submissions must be made through the supplier portal linked in the solicitation, and no point of contact information is provided within the posting, suggesting that all inquiries and submissions should be handled through the online portal.

Newspaper Publishers

POSTED

about 16 hours ago

DEADLINE

Vendor Credentialing and Health Compliance Management

Blood and Organ Banks

POSTED

about 19 hours ago

DEADLINE

M/WBE Participation and Subcontracting Plan Development

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE

Safety and Fire Life Safety Compliance Oversight

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE

Infection Control and ICRA Compliance Management

Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

Steel Fabrication and Anchorage Supply

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Brick Screen Installation – Masonry Work

Masonry Contractors

POSTED

about 19 hours ago

DEADLINE

IFB# 2017267 Motor St. Parking Garage Brick Screen

Solicitation # 761

The solicitation IFB# 2017267 by Parkland Health and Hospital System seeks bids for the installation of a brick screen at the Motor Street Parking Garage, with a proposed contract value of $2,500 based on a contingency allowance, though no other line-item pricing is specified. The procurement follows a Lowest Price Technically Acceptable (LPTA) model, awarding the contract to the lowest-priced responsive bidder who meets all technical and compliance requirements. Proposals must be submitted electronically through the Parkland Strategic Sourcing portal by 2:00 p.m. Central Time on August 25, 2026, with an optional paper copy also accepted. Offerors must complete and submit mandatory exhibits including Exhibit D (the official bid form), Exhibit B series (M/WBE participation plans and good faith efforts), Exhibit C (Scope of Work), and Exhibit E (Contractor Construction Safety Manual), and must accept the non-negotiable terms of Exhibit C. The project site is at the Parkland Hospital campus, and all work must comply with strict infection control and life safety protocols, including ICRA classifications and ILSM requirements, with inspections conducted by Parkland staff across multiple domains such as fire safety, crane operations, and confined space entry. Contractors must be certified through accredited agencies as M/WBEs if seeking to fulfill the 16% M/WBE participation goal, and all bidders must comply with additional Texas-specific requirements including the prohibition on boycotting Israel, certification that no majority ownership or control exists by entities in China, Iran, North Korea, or Russia, and adherence to the Comptroller’s list of prohibited businesses. All personnel must register with Symplr within five business days of contract award and be fully immunized, including TB, Hepatitis B, measles, mumps, rubella, and seasonal influenza, with strict health screening enforced on-site. Mandatory PPE includes hard hats, safety glasses, high-visibility vests, steel-toe boots, and respiratory protection where required, and failure to comply leads to immediate removal. Work is restricted to weekdays between 7:00 a.m. and 7:00 p.m. without prior written approval. Performance and payment bonds totaling 100% are required for contracts over $25,000, and a one-year workmanship warranty is mandated following final acceptance. The contract includes a guaranteed minimum purchase of $100 if structured as an IDIQ, though the

Masonry Contractors

POSTED

about 19 hours ago

DEADLINE

Logistics and Delivery ServicesThe contract requires the secure shipping and delivery of two drone units within 90 calendar days from the effective date, with mandatory real-time tracking and full insurance coverage throughout transit to ensure the safety and accountability of the equipment. The delivery must be completed without delay or damage, and all logistical operations must comply with industry-standard protocols for handling sensitive technological payloads. While the exact points of origin and destination are unspecified, performance is expected to meet the operational needs of Parkland Health and Hospital System in Texas, with adherence to timing, security, and documentation requirements. This is a subcontract under NAICS code 492110, focused on courier and express delivery services, issued by Parkland Health and Hospital System through their supplier portal. The solicitation was posted on August 6, 2026, with responses due by September 8, 2026, indicating a tight turnaround for qualified vendors to propose their capabilities. There is no set-aside classification specified, and no direct point of contact is provided, suggesting proposals must be submitted through the designated online portal linked in the contract data. The absence of detailed location information implies flexibility in routing, but the vendor assumes full responsibility for ensuring the drones reach an authorized Texas-based facility under the specified conditions.

Couriers and Express Delivery Services

POSTED

DEADLINE

in about 1 month

Secure Data Storage and IT Compliance SupportThe contract titled Secure Data Storage and IT Compliance Support requires the vendor to ensure the secure handling, storage, and transmission of drone-collected data in full alignment with Texas IT security standards and applicable federal regulations. This subcontract is issued by Parkland Health and Hospital System under the NAICS code 541512, which corresponds to computer systems design and related services, indicating the need for technical expertise in secure data infrastructure and compliance frameworks. The solicitation was posted on August 6, 2026, with a response deadline of September 8, 2026, and performance is expected to support operations within the state of Texas, though specific geographic details are not provided. The focus is on maintaining data integrity and confidentiality throughout the lifecycle of drone operations, particularly in environments where sensitive information may be collected or processed. Vendors must demonstrate proven capability in meeting state and federal cybersecurity requirements, with an emphasis on secure data protocols, risk mitigation, and compliance documentation.

Computer Systems Design Services

POSTED

DEADLINE

in about 1 month

Drone Operator Training and CertificationThe contract titled Drone Operator Training and Certification is a subcontract aimed at providing comprehensive training to law enforcement personnel in the operation of drones, adherence to safety protocols, and full compliance with FAA Part 107 regulations. The training is designed to ensure that personnel are proficient in safe and lawful drone usage in official capacities, with an emphasis on operational effectiveness and regulatory adherence. The solicitation was posted on August 6, 2026, and responses are due by September 8, 2026, with the North American Industry Classification System code 611430 indicating the work falls under other schools and instruction services. The contract is issued by Parkland Health and Hospital System under the Texas agency designation, though the specific location of performance and point of contact information are not provided. Despite the agency's healthcare title, the focus on law enforcement training suggests a potential collaboration with local or regional public safety entities. The subcontract does not indicate a set-aside status or specific procurement category, and no detailed deliverables or performance metrics are outlined in the provided data. Interested vendors must submit proposals by the deadline to be considered for participation in delivering this specialized training program.

Professional and Management Development Training

POSTED

DEADLINE

in about 1 month

Drone Equipment Warranty and Maintenance ServicesA one-year comprehensive warranty is offered for drone systems, covering all necessary labor, replacement parts, diagnostics, and ongoing technical support to ensure uninterrupted operational functionality. The service agreement is structured as a subcontract under the NAICS code 811212 and is being procured by Parkland Health and Hospital System in Texas, with a solicitation period opening on August 6, 2026, and closing on September 8, 2026. All warranty services are to be delivered in support of drone operations critical to the organization’s mission, with full responsibility for maintaining system reliability resting with the contractor throughout the term. The contract does not specify a particular location for performance beyond the state of Texas, and the point of contact details are not provided in the posting.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 1 month