This Solicitation opportunity from Department Of Defense was posted on March 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RFP Routing Logic Radio Interface; Sole Source to Raytheon

Closed

SPRRA2-25-R-0114Federal

Submission Closed02/27/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336414

New

Federal

Non-Destructive Testing (NDT) / Inspection ServicesThis subcontract for Non-Destructive Testing (NDT) and Inspection Services supports prime contractors on NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves performing specialized inspections on wheel halves to identify structural failures or fatigue using visual, Magnetic Particle, Dye Penetrant, or X-ray testing methods. All units must be verified against technical drawings by personnel holding ASNT or equivalent aviation certifications, with the final deliverables consisting of detailed inspection reports and structural integrity certifications. The opportunity is categorized under NAICS code 336414 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Overhaul & Repair ServicesThis subcontract for Aircraft Wheel Overhaul and Repair Services involves performing technical overhauls of aircraft wheel halves for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes the disassembly, cleaning, degreasing, and inspection of wheel halves to identify defects or wear. The contractor is responsible for component repair, replacement, and reassembly specifically using tooling for part number A37952, with all units marked according to MIL-STD-130 standards. The primary deliverable for this project is 87 overhauled and tested wheel halves delivered in Ready For Issue condition. This effort falls under NAICS code 336414 and is managed under the Department of Defense. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Contractor First Article Testing (FAT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires specialized First Article Testing for shimmy damper discs. The selected contractor will verify material properties, dimensions, and overall performance against the Technical Data Package and QAP 13873 011907802–06108. To ensure precision, the work must be performed using aerospace-grade measurement equipment, including Coordinate Measuring Machines and material analysis tools, resulting in the delivery of a validated test unit and a comprehensive First Article Test Report. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336414. Interested parties must adhere to the timeline established by the posting date of October 19, 2026, with a response deadline of October 26, 2026. This project serves prime contractors to ensure critical components meet strict military and aerospace specifications before full-scale production.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Aerospace Component Manufacturing (Port Inserts)This subcontract, issued by the Department of Defense for the DLA Weapons Support ASC, involves the precision machining and fabrication of nine aerospace-grade Port Inserts under Meggitt part number 131448 and NSN 2915015062079. The work is designated as a Total Small Business Set-Aside under NAICS code 336414, with performance taking place at Tinker AFB. The contractor must adhere to strict Critical Application Item quality standards and utilize MIL-STD-1916 or ASQ H1331 sampling and inspection protocols. Additionally, the provider is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment to ensure necessary cybersecurity standards are met.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Cooling Turbine Impeller Wheel FabricationThis subcontract involves the fabrication of high-precision aircraft cooling turbine impeller wheels, specifically part number 571579-1, for the DLA Weapons Support Aviation Supply Chain. The selected manufacturer must perform precision machining and forming in strict accordance with Boeing and Honeywell specifications. Performance will take place at Tinker AFB, and the project falls under NAICS code 336414. Compliance requirements are stringent, necessitating ISO 9001:2015 quality systems and CMMC Level 2 certification. All components must undergo testing per MIL-STD-1916 or ASQ H1331, with final delivery requiring packaging and marking that adheres to ASTM D3951 and MIL-STD-129 standards. The response deadline for this opportunity is October 23, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Launch Integration & Logistics ServicesThe Launch Integration and Logistics Services subcontract, managed by the NASA Johnson Space Center, focuses on providing critical support for Commercial LEO Destination projects. The scope of work involves transporting hardware to launch sites, performing cleanroom integration, and mating spacecraft with launch vehicles to produce a final Integrated Stack. The contractor is responsible for ensuring all launch vehicle-to-element interface requirements are met to deliver a flight-ready assembly. This opportunity is categorized under NAICS code 336414 and is based in Houston. Interested parties must submit their responses by the deadline of December 8, 2026. The contract ensures that prime contractors have the necessary logistics and technical handling services to successfully transition spacecraft from transport to the launch pad.

NASA Johnson Space Center

POSTED

DEADLINE

First Article Testing (FAT) & Quality ValidationThis subcontract opportunity with the Department of Defense for DLA Aviation in Oklahoma City focuses on First Article Testing and Quality Validation. The selected contractor will be responsible for performing technical testing and generating validation reports for the first production units of prime contractors. Key deliverables include the development of First Article Test Plans and the execution of testing using precision measurement and inspection equipment to ensure all units meet DLA Aviation standards. The scope of work culminates in the delivery of completed Test Plans and First Article Test Reports. This requirement falls under NAICS code 336414. Interested parties should note that the response deadline for this opportunity is November 16, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Manufacturing of Augmentor Com LinersThis subcontract involves the precision manufacturing of Augmentor Com Liners for prime contractors supporting DLA Aviation projects under the Department of Defense. The scope of work requires the production of components according to specific manufacturer part numbers 4078304, KDS 2840-1150, 4071130, and 2840PL0664349, all of which must adhere to technical specification FD20302402220. To qualify, the provider must be approved on the Source Approval Worksheet and maintain rigorous quality control systems suitable for Critical Safety Items. Additionally, the contractor must demonstrate compliance with NIST SP 800-171 Rev 1 standards. The contract was posted on October 15, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336414.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Request for Proposal

Solicitation # 80JSC027R0004

The National Aeronautics and Space Administration Johnson Space Center is soliciting proposals under solicitation 80JSC027R0004 for the Commercial Low Earth Orbit Destination Contract. This effort seeks a Multi-Award Indefinite Delivery/Indefinite Quantity contract, utilizing a Firm-Fixed-Price structure, for the design, development, manufacture, launch, and operation of a Commercial LEO Destination System to succeed the International Space Station. The system comprises three primary components: the Crew Transportation System, the Commercial LEO Destination, and the Cargo Transportation System. Performance is measured across three capability categories ranging from one-month crew tended missions to six-month standard service missions. The contract includes a base ordering period from April 2027 through April 2035, with two subsequent option periods extending the potential performance through April 2042. Proposals are due by December 8, 2026, at 1:00 p.m. Central Time, with Volume III regarding past performance requested early on November 24, 2026. Award decisions will be based on best value, evaluating Mission Suitability, Price, and Past Performance, with Mission Suitability being the most significant technical factor. The scope of work involves rigorous certification and safety standards, including compliance with AS9100 and specific human space flight requirements. Key contractual obligations include the submission of an Organizational Conflicts of Interest plan, adherence to the Outer Space Treaty, and the procurement of specific property damage insurance for certain launch vehicle categories. All submissions must be delivered electronically via NASA's EFISS Box in Microsoft Office formats.

NASA Johnson Space Center

POSTED

DEADLINE

Manufacture and Supply of Metal Grille (Boeing P/N L5342076-001)This subcontract involves the manufacture and supply of one specialized metal grille, Boeing Part Number L5342076-001, for the DLA Weapons Support ASC. The contractor is responsible for fabricating or procuring the component according to OEM specifications and ensuring delivery FOB Origin to Tinker AFB. Strict adherence to packaging, marking, and quality sampling standards is required, specifically following ASTM D3951, RP001, MIL-STD-129, and either MIL-STD-1916 or ASQ H1331. To be eligible for this contract, the provider must maintain CMMC Level 2 and DFARS 252.204-7012 compliance. The project falls under NAICS code 336414 and is managed by the Department of Defense. Interested parties must respond by October 22, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Repair Services for P8 Window Heat Control UnitThis subcontract involves the restoration of a Window Heat Control Unit for prime contractors supporting Navsup Weapon Systems Support Philadelphia projects. The selected provider will evaluate and repair part number 83000-27904, ensuring all work adheres to original manufacturer specifications. The process requires the use of OEM-standard testing equipment and strict electrostatic discharge protection to deliver one fully repaired and tested unit. To be eligible, the contractor must be an approved source for P8 aircraft component repair. This opportunity falls under NAICS code 336414 and is associated with the Department of Defense. Interested parties must respond by October 22, 2026, for performance located in Philadelphia.

Navsup Weapon Systems Support

POSTED

DEADLINE

V-22 Aircraft Component Repair and OverhaulThe V-22 Aircraft Component Repair and Overhaul subcontract involves the repair, testing, and inspection of Government Furnished Property repairable assemblies for prime contractors supporting Navsup Weapon Systems Support. The scope of work includes conducting preliminary inspections, teardown and evaluation, and necessary modifications according to governing repair manuals to ensure all assets are returned to Ready For Issue condition. Managed under the Department of Defense, this effort requires the contractor to maintain CMMC compliance and secure access to V-22 technical data. The primary objective is the delivery of repaired and RFI-certified assets under NAICS code 336414, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support

POSTED

6 days ago

DEADLINE

in 27 days

General Info

Agency

Department Of Defense → Al DLA Aviation At Huntsville

NAICS

336414 - Guided Missile and Space Vehicle Manufacturing

Place of Performance

MA, 01810, USA

Set-Aside

NONE

Documents

RFP SPRRA225R0114 Amendment 0005

amendment

High

RFP SPRRA2-25-R-0114 Amendment 004

1 page · amendment

High

RFP SPRRA2-25-R-0114 for Routing Logic Radio Interface Units

3 pages · rfp

High

SPRRA2-25-R-0114 Amendment 0005 Parts List

modification

High

AMD 001 IDIQ Common Kit Weight Quantity Range and BEQs

16 pages · other

Low

AMD 004 IDIQ Common Kit WT Quantity Range and BEQs

11 pages · other

Low

Sources Sought Notice for RLRIU P/N 13740724

1 page · sources-sought

Low

SPRRA2-25-R-0114 Quantity Range and BEQs

2 pages · contract-document

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

3 updates

PhaseClosed

PostedAug 20

Presolicitation

Type ChangedOct 20

Presolicitation → Solicitation

Type ChangedNov 6

Solicitation → Sources Sought

Notice updatedNov 6

The notice description changed.

Type ChangedNov 10

Sources Sought → Solicitation

Deadline changedDec 17

Response deadline changed from Dec 31, 2025 to Feb 27, 2026.

Response DeadlineFeb 27

Deadline has passed

Notice updatedMar 5

The notice description changed.

Submission Closed

02/27/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

Contacts1 person available

OfficeREDSTONE ARSENAL, AL, 35898-7340, USA

Organization / AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

Office AddressREDSTONE ARSENAL, AL, 35898-7340, USA

Contacts

Kelsey Brown

contact@example.gov

Full Description

See attachments:

RFP (Raytheon SPRRA2-25-R-0114)
SPRRA2-25-R-0114 QTY Range and BEQs

AMD 001

THE PURPOSE OF THIS AMENDMENT IS TO:

1) UPDATE SECTION C(1)(a) OF SPRRA2-25-R-0114:

FROM: TO COMPLY WITH THIS SOLICITATION, THE OFFEROR IS REQUIRED TO PRICE TWO (2) YEARS FOLLOWING CONTRACT AWARD FOR THE QUANTITY RANGES FOUND IN ATTACHMENT “SPRRA2-25-R-0114 QTY RANGE AND BEQS.”

TO: TO COMPLY WITH THIS SOLICITATION, THE OFFEROR IS REQUIRED TO PRICE ONE (1) YEAR FOLLOWING CONTRACT AWARD FOR THE QUANTITY RANGES FOUND IN ATTACHMENT “AMD 001 SPRRA2-25-R-0114 QTY RANGE AND BEQS.”

2) ADD THE FOLLOWING VERBIAGE TO SPRRA2-25-R-0114:

THE PROPOSAL MUST PROVIDE A RANGE COVERING THE MIN, MAX QUANTITIES WHILE ALSO PROPOSING AND CERTIFYING TO THE 1 YEAR BEST ESTIMATED QUANTITY (BEQ), WHICH IS DETERMINED AS THE HIGHEST PRICED ALTERNATIVE TO THE GOVERNMENT, PER FAR 1.108(C) AND SHALL BE USED FOR TOTAL PROPOSED PRICE EVALUATION. THIS IS THE MAXIMUM QUANTITY FOR WHICH CERTIFIED COST OR PRICING DATA IS REQUIRED.

3) ADD ATTACHMENT “AMD 001 SPRRA2-25-R-0114 QTY RANGE AND BEQS” WHICH SHALL REPLACE ATTACHMENT “SPRRA2-25-R-0114 QTY RANGE AND BEQS.”

AMD 002 - October 14, 2025

The purpose of AMD 002 is to:

1) Remove the following line item from attatchment "AMD 001 SPRRA2-25-R-0114 QTY RANGE AND BEQS:"

Description: Initial FMS RLRIU (13740724 Only)

CLIN: 0008

MIN: 0

BEQ: 1

MAX: 0

2) Add the following attachment "AMD 001 SPRRA2-25-R-0114 QTY RANGE AND BEQS_2025OCT14."

3) Delete the following attachments as they are no longer applicable:

SPRRA2-25-R-0114 QTY RANGE AND BEQS