Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, PISTON

Active
SPE7M1-26-T-237QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of piston rings identified by part number 18-20420-8R1 and NSN 4310017062926, with a total quantity of four units divided into two line items: two units at $4.00 each and two units at $2.00 each, both totaling $12.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance—exactly four units must be delivered. All items must be prepared for shipment in compliance with MIL-STD-2073-1E packaging standards, marked according to MIL-STD-129, and palletized per DLA’s RP001 requirements. Special marking is not required. Shipment must be sent via the fastest traceable method, strictly prohibiting parcel post, and delivered to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. The original required delivery date is July 27, 2026, and the contract is governed by Department of Defense logistics procedures including DLA Procurement Notes C19 and C20 for transportation. The solicitation number is SPE7M1-26-T-237Q, under NAICS code 333912, and the point of contact for inquiries is Michael Reese at DLA.

General Info

Four piston rings ordered, $12 total, FOB destination, delivery by July 27, 2026, to USS HYMAN G RICKOVER.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

UNIT 100107 BOX 1, FPO, AE, 09591, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,PISTON
RING,PISTON
RIX INDUSTRIES 28953 P/N 18-20420-8R1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659268 0001 EA 4.000
NSN/MATERIAL:4310017062926
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V27157
USS HYMAN G RICKOVER (SSN 795)
UNIT 100107 BOX 1
FPO AE 09591
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V27157
SPE7M1-26-T-237Q
SECTION B
PR: 7017659268 PRLI: 0001 CONT’D
USS HYMAN G RICKOVER (SSN 795)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V2715762021493
RDD: 777
PROJ: JE5 TP 3
SUPP ADD: YSTOCK SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A4A DIST: E9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017659273 0001 EA 2.000
NSN/MATERIAL:4310017062926
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A UNIT CONT:D3 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
SPE7M1-26-T-237Q
SECTION B
PR: 7017659273 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V27157
USS HYMAN G RICKOVER (SSN 795)
UNIT 100107 BOX 1
FPO AE 09591
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V27157
USS HYMAN G RICKOVER (SSN 795)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V2715762024088
RDD: 777
PROJ: JK5 TP 3
SUPP ADD: YNEA01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A4A DIST: E9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M1-26-T-237Q NSN/Part Number: 4310-01-706-2926 Quantity: 4 EA Purchase Request: 7017659273QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237P
The contract is for one piston ring with part number 18-20419-12R1 and NSN 4310-01-706-4138, issued by the Defense Logistics Agency under solicitation SPE7M1-26-T-237P. Delivery is required within 20 days of contract award, with shipments to be delivered FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. Palletization must follow DLA’s RP001 packaging requirements, and parcel post is prohibited—shipment must be sent by the fastest traceable means. The required delivery date is July 27, 2026, and the contract is assigned to DLA vendors who must use the VSM system for fulfillment. The item falls under NAICS code 333912 and is procured by the Department of Defense through the Maritime Supply Chain office.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237L
The contract pertains to the procurement of one piston ring, part number 18-20416-7R1 and NSN 4310-01-706-3788, under solicitation SPE7M1-26-T-237L, with a required delivery within 20 days of award to the USS HYMAN G RICKOVER at FPO AE 09591. The item must be delivered FOB destination with zero variance in quantity and is subject to inspection and acceptance at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Supplier shipment must be made via the fastest traceable means, excluding parcel post, using the V27157 vendor code and RDD 777 for logistics tracking. The contract specifies the unit of issue as each, priced at one dollar, with total price reflecting the single unit. The supplier is directed to use VSM for DLA shipments, and the procurement is tied to project JK5 TP 3 under supply chain support code YNEA01. All delivery logistics, transportation procedures, and compliance are bound by DLA procedural notes C19 and C20, and the contract includes a required delivery date of July 27, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, COMPRESSOR
Solicitation # SPE7M4-26-T-291L
The contract pertains to the procurement of six compressor rings with NSN 4310-01-061-1286 and part number 8234B, supplied by Curtiss-Wright Electro-Mechanical Corp and Dresser-Rand Co, under solicitation SPE7M4-26-T-291L. The item is designated as a critical application component and must comply with stringent DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific permitted uses such as batteries, lighting, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as specified in NAVSEA 5100-003D. The items must be delivered FOB origin within 57 days of contract award, with a required delivery date of August 4, 2026, and a zero tolerance for quantity variance. All deliveries must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, following designated transportation protocols outlined in DLAD Proc Notes C19 and C20. The unit of issue is each, with a unit price of $6.00, resulting in a total contract value of $36.00, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions as of the solicitation issue date controlling unless amended.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
Federal
Final Assembly, Testing & Vacuum CertificationThe contract involves the final assembly, testing, and vacuum certification of rotary feedthrough components, with a focus on integration and performance validation under vacuum conditions. Key activities include leak testing to ensure system integrity and encoder calibration to guarantee precise rotational feedback, both critical for operational reliability in space environments. This work is part of a subcontract under NASA’s Shared Services Center, aligned with NAICS code 333912 for other commercial and industrial machinery manufacturing, and must be completed by the response deadline of August 3, 2026. The performance is expected to meet stringent vacuum and precision standards required for NASA missions, though specific locations and point of contact details are not provided.
NASA Shared Services Center

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
Federal
43--SEAL ASSEMBLY,SHAFT,SP
Solicitation # SPE7M126Q1304
The procurement is for 104 units of NSN 4320012698849, a shaft seal assembly, to be delivered to W1A8 DLA Distribution within 30 days after award. This request for quotation is designated as a Small Business Set Aside under NAICS code 333912, meaning only small business concerns are eligible to compete. The solicitation number is SPE7M126Q1304, posted on July 29, 2026, with quotes due by August 5, 2026. All submissions must be made electronically through the SAM.gov platform, and no hard copies of the solicitation are available. Technical details, including digitized drawings and military specifications, can be accessed electronically via the provided link. The contract is managed by the Defense Logistics Agency Land and Maritime, with the office located in Columbus, Ohio. Inquiries should be directed via email to the designated point of contact, and interested parties must refer to the official solicitation document on DIBBS or SAM.gov for full requirements and instructions.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333912
New
Federal
66A Rotary feedthrough for VOiD deposition system
Solicitation # 80NSSC26938965Q
NASA/NSSC is seeking to award a sole source contract to KURT J LESKER CO for the 66A Rotary feedthrough required for a VOiD deposition system, as it has been determined that this vendor is the sole provider of this specific component. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance taking place at NASA’s Glenn Research Center. The NAICS code for this effort is 333912, and the solicitation number is 80NSSC26938965Q. Although this is not a request for quotes and price submissions will not be reviewed, interested organizations may submit written capability and qualification statements by 9:00 a.m. Central Standard Time on August 3, 2026, solely to assist the government in determining whether to pursue competitive bidding. All correspondence must reference the contract ID to ensure proper tracking. Oral communications are prohibited, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies. The primary point of contact is Monica Wilson, Procurement Assistant, with Karen Artis as the secondary contact. The contract will not utilize any set-aside programs.
NASA Shared Services Center

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
Federal
AMSA 21 Pressure Washer
Solicitation # W911S226U3856
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting offers for the AMSA 21 Pressure Washer under solicitation number W911S226U3856, a combined solicitation set aside exclusively for small businesses as defined by the Small Business Administration. The requirement is classified under NAICS code 333912, indicating it pertains to the manufacturing of other agricultural, construction, and mining machinery. The solicitation was posted on July 29, 2026, with a firm deadline for submissions on August 4, 2026, at 4:00 PM Eastern Time. The contract will be awarded and performed at a location with a zip code of 08640, though specific city and state details for performance are not provided. The primary point of contact for inquiries is Guillermo Ramos, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 609-562-7558, and the official solicitation can be accessed through the SAM.gov portal.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333912
New
SLED
Pressurized Gas Delivery System IntegrationMississippi State University is seeking a subcontractor to supply and integrate a regulated pressurized gas system, such as carbon dioxide or nitrogen, designed to deliver consistent spray pressure and precise dosing for research applications. The system must meet strict industry standards for reliability and control, ensuring accurate and repeatable performance in sensitive laboratory environments. The contract is open for submission with a response deadline of August 11, 2026, and falls under NAICS code 333912, indicating involvement in industrial machinery manufacturing. The place of performance and exact location details are not specified, but the work is expected to align with the university’s research infrastructure needs. All proposals must be submitted by the stated deadline to be considered, and no set-aside provisions are indicated for this solicitation.
MISSISSIPPI STATE UNIVERSITY

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333912
New
DIBBS
DISCONNECT ASSEMBLY
Solicitation # SPE4A6-26-T-07VS
The contract pertains to the procurement of two Disconnect Assembly, Compressor units with part number 2210191-1 and NSN 4310013195804 under solicitation SPE4A6-26-T-07VS, issued by the ASC Commodities Division of the Department of Defense. Delivery is required to DLA Distribution Cherry Point in North Carolina within 672 days after award, with a firm delivery date of May 31, 2028, under FOB Origin terms and a zero percent quantity variance. The items must be manufactured and inspected in full compliance with the DLA Master List of Technical and Quality Requirements, which supersedes all other referenced standards including ASTM D3951. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified, with attributes categorized as critical, major, or minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), but physical bare item marking must adhere to RQ017 requirements. Packaging and labeling must conform strictly to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, including palletization, with unit of issue as EA and quantity per unit pack as specified. All hazardous materials require compliance with 29 CFR 1910.1200, including pre-award submission of Safety Data Sheets and labeling per MIL-STD-129, while items containing radioactive materials exceeding specified thresholds must be distinctly marked. Inspection and acceptance occur at the destination, with government oversight per FAR 52.246-2. Invoicing is mandatory through Wide Area WorkFlow (WAWF), and the contract incorporates multiple FAR and DFARS clauses including those on cost-type contracting, cybersecurity, trafficking in persons, subcontracting, and safeguarding of defense information. Deviations 2026-O0015 and 2026-00038 have been applied to subcontracting clauses, and the contracting officer retains authority to modify pricing and conditions per DFARS 252.243-7001. Offerors must be
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333912
New
DIBBS
PUMP, CENTRIFUGAL
Solicitation # SPE7M1-26-T-183S
The contract is for the procurement of one centrifugal pump, identified by NSN 4320017232413 and AMPCO part number ZC2 2X2, designated as a critical application item. The customer must supply the serial number of the existing pump to ensure precise compatibility in form, fit, and function. Delivery is required within 20 days of order award, with a target delivery date of June 30, 2026, under FOB origin terms, and acceptance occurs at the destination location in San Diego, California. The unit of issue is one each, with a total contract value of $1.00. Packaging must conform to MIL-STD-2073-1E and palletization must follow DLA RP001 requirements, with marking fully compliant with MIL-STD-129 and no special markings required. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced via RA001, and all standards apply as of the award date. The pump must be shipped to the Military Sealift Command BATS facility and transportation is subject to DLAD procedural notes C19 and C20. Invoicing and payment processing must occur through the Wide Area WorkFlow system, and no alternative invoicing methods are permitted. The solicitation number is SPE7M1-26-T-183S, issued under the Department of Defense, with responses due via DIBBS by July 31, 2026. Multiple Federal Acquisition Regulation clauses are incorporated, including those related to cybersecurity, hazardous materials, employment eligibility, trafficking in persons, sustainable products, and safeguarding defense information, with several deviations approved under deviation number 2026-00038. The contract includes mandatory representations from offerors regarding entity identification, socioeconomic status, and compliance with federal restrictions on covered defense telecommunications equipment. No options, key personnel requirements, or security clearances are specified. Compliance with packaging, marking, and technical standards is mandatory, and inspection and acceptance are performed by the government at the destination.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333912
New
DIBBS
RING SET, PISTON
Solicitation # SPE7M1-26-T-236L
The contract specifies the procurement of a piston ring set identified by NSN 4310-01-194-6831 and part number W114364T19, with a quantity of five units, each unit being a single set. Delivery is required within 20 days from the contract date, with shipment to be delivered FOB origin and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering strictly to DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. Palletization must follow DLA’s RP001 packaging requirements, and the unit of issue is specified as SE. The shipment is to be sent via the fastest traceable means and explicitly excludes parcel post. The delivery address is the Naval Amphibious Base in Coronado, California, with a specific point of contact for government use. The contract number is SPE7M1-26-T-236L, originally solicited with a response deadline of August 10, 2026, and an original required delivery date of July 23, 2026. All technical and quality specifications referenced are incorporated by inclusion from the DLA Master List, and the supplier must ensure full compliance with all applicable military and procurement standards as defined in the referenced QAP and other governing documents.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
PUMP, CENTRIFUGAL
Solicitation # SPE7M1-26-T-2930
A centrifugal pump with NSN 4320-01-723-2413 is being procured in a single unit under purchase request 7014664138, with a delivery requirement of 20 days after award. The solicitation is issued under contract number SPE7M1-26-T-2930, published on July 28, 2026, with responses due by July 31, 2026. This federal procurement falls under NAICS code 333912 and is managed by the Maritime Supply Chain organization within the Department of Defense. Performance will occur at FPO with ZIP code 34088-3000. The primary point of contact is Anastasia Faber, reachable via email at anastasia.faber@dla.mil or phone at 6146925412. The solicitation is open for bidding through the DIBBS platform, with no set-aside classification applied.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335312
New
DIBBS
SYNCHRO, DIFFERENTIA
Solicitation # SPE7M1-26-T-238B
Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
ELECTRONIC COMPONEN
Solicitation # SPE7M1-26-T-237M
This contract under solicitation SPE7M1-26-T-237M pertains to the procurement of one electronic component identified by NSN 5998-01-659-2133, with a required delivery within 20 days of award and delivery terms set at FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific design control tied to multiple revision-controlled drawings dated between 2009 and 2024. Packaging and preservation must adhere to MIL-STD-2073-1E and the special packaging instruction SPI AM1305671 dated September 12, 2024, while labeling follows MIL-STD-129 and palletization complies with DLA Packaging Requirements. The contract mandates Cybersecurity Maturity Model Certification Level 2 self-assessment and applies Covered Defense Information protocols. Inspection and acceptance occur at origin, with zero variance allowed in quantity. The delivery destination is Camp Carroll, Waegwan, South Korea, and shipping must follow DLA transport procedures C19 and C20. The supplier must also comply with requirements for removal of government identification from non-accepted supplies and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. All documentation, marking, and unit of issue must align with DLA and ANSI standards.
Bare Printed Circuit Board Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-237D
This contract pertains to the procurement of one unit of an Alternating Current Motor with NSN 6105-01-502-5614 under solicitation SPE7M1-26-T-237D, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a Critical Application Item, manufactured by Illinois Tool Works Inc. with part number 008359, and must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB Origin. The quantity is strictly fixed at one unit with no variance allowed. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 under DLA’s packaging requirements, utilizing specific preservation methods and container codes, and must be shipped via traceable means, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is June 29, 2026, and inspection and acceptance occur at the destination. Shipping must follow DLAD Procurement Notes C19 and C20, and vendor shipment must use the assigned Traceability Control Number. The point of contact for the contract is Michael Reese, with contract data including NAICS code 335312 and official solicitation links for reference.
Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-Q-1274
The contract specifies the procurement of 120 kits of thegas detector with NSN 6665-01-690-8588 under solicitation SPE7M1-26-Q-1274, issued as a total small business set-aside with a firm fixed price structure. Delivery is required within 100 days after award, with FOB origin and inspection and acceptance occurring at the destination. Packaging and preservation must comply strictly with MIL-STD-2073-1E, Appendix D, for kits, requiring that all components be individually protected against corrosion and damage, with loose hardware sealed in bags or boxes and no bulk shipping permitted. Preservation methods must match the most critical item within each kit, and every kit must include a parts list detailing component names, numbers, and quantities. Marking must adhere to MIL-STD-129, including serial numbers on unit, intermediate, and shipping containers, with matching serial data on the packing list. Packaging must also follow DLA’s standardized requirements and avoid any mercury or mercury compounds. The contract mandates zero-defect acceptance sampling under MIL-STD-1916 or equivalent zero-based plans, with verified attributes assigned specific verification levels or AQLs, and any unspecified attributes treated as major. If MIL-STD-105/ASQ Z1.4 is used, acceptance requires zero non-conformances unless otherwise stated. The detector model is specified as Honeywell Analytics Inc. P/N HU-X1W1H1M1Q1-Y-NV, and may contain batteries, subject to hazardous material handling rules. Pricing is structured in tiered quantity brackets from 120 to 300 units, with delivery scheduled at 100 days for all tiers. A required unit of issue is KT (kit), and all packaging elements must be fully compliant with DLA’s packaging requirements, including proper labeling and segregation per MIL-STD-2073-1 Appendix D. The contract includes technical and quality requirements referenced from the DLA Master List, and all materials must arrive in fully serviceable condition without requiring further sorting or repackaging by the end user.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
TRANSDUCER, SERVOVAL
Solicitation # SPE7M1-26-T-238D
This contract pertains to the procurement of a transducer, servovalve identified by NSN 4810-01-153-8090, with a quantity of six units to be delivered within 70 days under solicitation SPE7M1-26-T-238D. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management protocols, and inspection and acceptance procedures conducted at origin. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, while marking follows MIL-STD-129 without special codes, and palletization aligns with DLA packaging guidelines. Delivery is FOB origin to the specified warehouse in Tracy, California, with no variance allowed in quantity. The contract prohibits intentional inclusion of mercury or mercury-containing compounds except in specified functional applications such as batteries, instruments, or Navy-controlled systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies that unit identification is not required, and transportation logistics are governed by DLA procedural notes C19 and C20. The required delivery date is December 4, 2027, though an earlier ship date of October 20, 2026, has been indicated. The point of contact for inquiries is Sara Wilson of the Department of Defense, Maritime Supply Chain.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-238C
This contract issued by the Defense Logistics Agency pertains to the procurement of magnetic contactors under NSN 6110011019710 and part number 70550-02028-101, with quantities of 61 units required at a unit price of $61.00 for a total contract value of $3,721. The product is classified as a critical application item for Sikorsky Aircraft Corporation, Te Connectivity Corporation, and National Machine Company, and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the supplied hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked according to MIL-STD-129 with no special marking codes, and palletization must meet DLA packaging standards. Delivery is FOB origin with zero variance permitted and inspection and acceptance occurring at the destination. The required delivery date is January 2, 2027, with a shipment deadline of January 11, 2027, and delivery must be completed within 153 days of award. The solicitation was issued under a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 10, 2026, and procurement is governed by DLA procedures for transportation and shipping to Corpus Christi, Texas.
Relay and Industrial Control Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-237G
The contract pertains to the procurement of one magnetic contactor starter unit with NSN 6110-01-411-9297, supplied by General Electric Company under solicitation SPE7M1-26-T-237G. Deliveries are due within 20 days of contract award and must be shipped FOB destination with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking with no special codes. The item is to be delivered to USNS PILILAAU T AKR 304 in FPO AP 96675, with transportation governed by DLA procedural notes C19 and C20. Strict sampling protocols apply per MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise stated, with attributes designated as critical, major, or minor and corresponding verification levels or AQLs assigned accordingly. Mercury and mercury-containing compounds are prohibited in any hardware or supply unless specifically exempted for functional uses such as batteries, fluorescent lamps, or controlled instruments, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by solicitation or award date depending on acquisition size. All requirements are binding, and the contractor must adhere to the designated unit of issue, delivery schedule, and government-specific identifiers for compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M1-26-T-238H
The contract specifies the procurement of one unit of a motor controller with NSN 6110015270208 and part number PL215-023-010, supplied by Carolina Power Systems of Sumter Inc, designated as a critical application item. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the final destination. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines, including palletization requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be labeled and shipped according to DLA procedures, with delivery addressed to USS SAN ANTONIO LPD 17 at FPO AE 09587, under shipment code RDD 777 and transportation reference DLAD PROC NOTES C19 and C20. The original required delivery date is July 2, 2026, and the contract is governed by solicitation SPE7M1-26-T-238H under a federal procurement framework managed by the Department of Defense’s Maritime Supply Chain.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-238F
This contract specifies the procurement of 42 units of a fixed chip resistor with part number TNPW121034K0BETA from VISHAY DALE ELECTRONICS, LLC, identified by NSN 5905-01-689-2990. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-39032 for resistors, and MIL-STD-129, with special marking code ZZ-ZZ applying. The item must be delivered FOB origin within 84 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, California. The need ship date is November 3, 2026, and the original required delivery date is December 31, 2026. The unit of issue is each, priced at $42.00 per unit for a total value of $1,764. Transportation logistics follow DLA Procurement Notes C19 and C20, and all packaging must align with palletization standards outlined in RP001. The contract is issued under solicitation SPE7M1-26-T-238F, with responses due by August 10, 2026, and falls under NAICS code 334416 for electronic component manufacturing.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
COMPRESSOR UNIT, REC
Solicitation # SPE7M1-26-T-237J
The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details