Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOTOR, ALTERNATING C

Active
SPE7M1-26-T-237DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of one unit of an Alternating Current Motor with NSN 6105-01-502-5614 under solicitation SPE7M1-26-T-237D, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a Critical Application Item, manufactured by Illinois Tool Works Inc. with part number 008359, and must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB Origin. The quantity is strictly fixed at one unit with no variance allowed. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 under DLA’s packaging requirements, utilizing specific preservation methods and container codes, and must be shipped via traceable means, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is June 29, 2026, and inspection and acceptance occur at the destination. Shipping must follow DLAD Procurement Notes C19 and C20, and vendor shipment must use the assigned Traceability Control Number. The point of contact for the contract is Michael Reese, with contract data including NAICS code 335312 and official solicitation links for reference.

General Info

One AC motor procured for USS Dwight D Eisenhower, delivery by June 29, 2026, FOB Origin, strict packaging and mercury restrictions apply.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

UNIT 100236 BOX 1, FPO, AE, 09532, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOTOR,ALTERNATING C
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
ILLINOIS TOOL WORKS INC. 80TF8 P/N 008359
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017351868 0001 EA 1.000
NSN/MATERIAL:6105015025614
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M1-26-T-237D
SECTION B
PR: 7017351868 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E9 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V03369
USS DWIGHT D EISENHOWER CVN 69
UNIT 100236 BOX 1
FPO AE 09532
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V03369
USS DWIGHT D EISENHOWER CVN 69
DLA VENDORS: USE VSM FOR
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V0336961736B37
RDD:
PROJ: EK5 TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A4A DIST: 9B ADV: FC: DR
Need Ship Date:00/00/0000 Original Required Delivery Date:06/29/2026
SPE7M1-26-T-237D NSN/Part Number: 6105-01-502-5614 Quantity: 1 EA Purchase Request: 7017351868QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M9-26-T-0032
The contract specifies the procurement of 13 units of an alternating current motor with part number E6440M3 and NSN 6105-00-808-1587, under solicitation SPE7M9-26-T-0032, with a required delivery within 84 days of the award date. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA-specific packaging guidelines under RP001. The item is classified as a critical application item and must meet stringent verification standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise directed. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The contractor must adhere to cybersecurity compliance under CMMC Level 2 Self-Assessment and satisfy documentation requirements for source approval and test equipment calibration. Unit of issue is each (EA), with no quantity variance permitted, delivery is FOB origin, and inspection and acceptance occur at the destination. The delivery address is Hill Air Force Base, Utah, with a need ship date of November 3, 2026, and original required delivery by December 10, 2027. The contract includes no requirement for Item Unique Identification per DFARS 252.211-7003(c)(1)(i), and government identification must be removed from non-accepted supplies. All shipments must follow DLA transport procedures C19 and C20.
ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, DIFFERENTIA
Solicitation # SPE7M1-26-T-238B
This contract pertains to the procurement of a SYNCHRO, DIFFERENTIAL component identified by NSN 5990-00-179-1871, with a quantity of 52 units at a unit price of $52.00, totaling $2,704. The item must be delivered FOB origin within 83 days of contract award, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with no use of mercury or mercury compounds permitted in any stage of preservation, packaging, or marking. The component must be sourced from a QPL-approved manufacturer at the time of award, and the item is designated as a critical application part, requiring compliance with SAE AS20708/81B and SAE AS20708C technical specifications. The use of ozone-depleting substances is strictly prohibited without written contracting officer approval, and the item is subject to CMMC Level 2 cybersecurity self-assessment requirements. Covered defense information applies, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Full and open competition applies, with no set-aside. The delivery address is the DLA Distribution New Cumberland Facility, and the required delivery date is November 18, 2026, with a need ship date of February 3, 2026. The solicitation number is SPE7M1-26-T-238B, with a response deadline of August 10, 2026, and the North American Industry Classification System code is 335312.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CURR
Solicitation # SPE7M1-26-T-237R
This contract covers the procurement of a single alternating current motor, identified by NSN 6105-01-527-2390 and part number N563A1A0N060000 from POWERTEC INDUSTRIAL MOTORS, INC., with a total quantity of 57 units. The unit price is $57.00, resulting in a total contract value of $3,249. Delivery is required FOB origin within 218 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as critical application. The motor must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including a strict prohibition on the use of Class I ozone-depleting chemicals, with any substitutions requiring prior approval. Packaging must adhere to ASTM D3951 as modified by DLA packaging requirements and MIL-STD-129 labeling standards, with palletization following RP001 guidelines. The item is subject to a total small business set-aside under NAICS code 335312, and all documentation and shipping instructions must reference the solicitation number SPE7M1-26-T-237R. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker AFB, with the same address used for both freight shipping and parcel post. The original required delivery date is May 5, 2027, and transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. Points of contact include Caylee Frabott for inquiries, with additional details on unit of issue and purchase units available through the provided DLA resources. All contractual obligations are governed by the DLA technical and quality standards effective on the solicitation issue date, and compliance with these requirements is mandatory for award and acceptance.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
CONTROLLER, ELECTRICAL
Solicitation # SPE7M1-26-Q-1307
The contract pertains to the procurement of a single unit of an electrical controller, identified by NSN 6110-01-662-6290, under solicitation SPE7M1-26-Q-1307. Delivery is required 261 days after the award date, with firm fixed pricing and zero variance allowed in quantity. The item must be shipped to the specified destination in Virginia Beach, Virginia, using traceable means only—parcel post is explicitly prohibited. Packaging must comply with MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without any special identification codes. The controller is designated as a critical application item, and its supply is tied to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or specific chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Any substitute chemicals require prior approval unless explicitly authorized by the governing specifications. The item’s requirement is linked to purchase request 7013945979, with a scheduled ship date of September 22, 2025, and the contract is issued under the Department of Defense’s Maritime Supply Chain, using the authorized DoD unit of issue. Government-specific codes and identifiers are included for internal tracking and logistics purposes.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
Federal
Circuit Breaker SupplyThe contract calls for the supply of 118 circuit breakers that must be of a specified brand or an equivalent alternative, designed for seamless integration into existing electrical systems at the Stennis Space Center. The delivery terms are FOB destination, meaning the supplier is responsible for all transportation costs and risks until the items reach the specified location. The opportunity is structured as a subcontract under a Small Business Set Aside, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 335312, which pertains to the manufacturing of electrical lighting and wiring equipment. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 5, 2026, at 3:00 PM Eastern Time. The contracting entity is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration, indicating this procurement supports federal aerospace infrastructure needs.
NASA Shared Services Center

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
Federal
59--SYNCHRO,RECEIVER
Solicitation # SPE7M126T237S
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 50 units of the SYNCHRO, RECEIVER with NSN 5990009135159, to be delivered to W1A8 DLA DISTRIBUTION within 228 days after award. This procurement is conducted under solicitation number SPE7M126T237S, which is available exclusively online via the provided SAM.gov link; no hard copies are distributed. All qualified and responsible suppliers are invited to submit electronic quotes before the deadline of August 10, 2026, with no restrictions on set-aside status. The solicitation includes references to digitized military specifications and drawings that can be accessed or ordered electronically. The procurement falls under NAICS code 335312, indicating it relates to other electrical equipment and component manufacturing. Questions must be directed to the designated point of contact at DibbsBSM@dla.mil, with further details available through the Additional Information link or by searching the solicitation number on the DIBBS website. The office responsible for the procurement is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
Federal
MOTOR,ALTERNATING C
Solicitation # N0010426QTB62
This contract solicitation, identified as N0010426QTB62, seeks repair services for the MOTOR, ALTERNATING C under a firm-fixed-price structure, with a required Repair Turnaround Time of 160 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All repairs must comply with applicable military standards, including MIL-STD-130 Rev N for marking, and adhere strictly to the original manufacturer’s technical specifications and approved repair procedures. The contractor is responsible for all inspection and quality assurance activities, with records required to be maintained for 365 days after final delivery, and Government Source Inspection is mandatory. Freight is handled by the Navy under CAV protocols, and all deliveries are FOB Origin. The contract requires written acceptance prior to execution, and quotes must include unit and total pricing, RTAT, and a comparison to the new unit price and lead time. The solicitation mandates compliance with numerous federal and defense-specific clauses, including mandatory use of Workflow Pro, cybersecurity maturity certification requirements, and a Small Business Subcontracting Plan. Contractors must be authorized distributors of the original manufacturer, with proof of authorization submitted with their offer. The item is governed by specific CAGE codes and reference numbers, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized under defined code systems. Packaging must follow MIL-STD-2073, and all technical documents provided by the Navy carry distribution restrictions governed by seven defined codes, with NOFORN and Official Use Only materials subject to strict access controls. The response deadline is August 28, 2026, and the contracting office is located in Mechanicsburg, PA, with primary point of contact Rebecca A. Rainey.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335312
New
Federal
MTU Detroit Diesel Engines
Solicitation # N0040626Q0312
The Fleet Logistics Center Puget Sound is seeking quotations for MTU Detroit Diesel 3-71 and 4-71 engines to replace existing units in Navy vessels, where technical manuals and engineering drawings mandate exact matching components to avoid systemic damage. Only original equipment manufacturer solutions from Rolls Royce Solutions America, Inc. are acceptable to ensure compatibility and operational integrity. All qualified vendors may submit proposals, and evaluations will be conducted under RFO 12.203, weighing technical merit, delivery schedule, price, and past performance without prioritizing any single factor. The solicitation is open to all responsible sources with no set-aside restrictions, and the North American Industry Classification System code is 335312. Responses must be submitted by August 4, 2026, with an anticipated award date later that month. The contracting officer is Homer Shoup, reachable at homer.o.shoup.civ@us.navy.mil, and the procurement is managed by the Department of Defense through the Naval Supply Systems Command in Bremerton, Washington.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335312
New
Federal
CHARGER,BATTERY
Solicitation # N0010426QJB94
This contract pertains to the repair of a CHARGER,BATTERY under solicitation N0010426QJB94, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The Government requires a strict Repair Turnaround Time (RTAT) of 44 days, measured from the physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system, to final Government acceptance. All repairs must conform to the original manufacturer's specifications and drawings, with strict adherence to MIL-STD-130 Rev N for marking and compliance with specified Cage Code and reference number A-57480-36-2. The contract mandates Government Source Inspection and requires the contractor to maintain complete inspection records for one year after final delivery. Freight is FOB Origin, and the Navy handles all logistics under the CAV Statement of Work. The award will be issued bilaterally and requires the contractor’s signed acceptance before execution. The contract includes mandatory compliance with Buy American and Free Trade Agreements, cybersecurity maturity model certification, and a Small Business Subcontracting Plan. The contractor must affirm they are an authorized distributor of the original manufacturer and provide supporting documentation. Pricing must be justified, especially if the item has not been previously purchased by NAVSUP WSS or if prices have increased, requiring comparable invoice data or historical pricing benchmarks. A T&E fee is allowed for items deemed beyond repair, up to a negotiated not-to-exceed amount. The contract contains an option for increased quantity exercisable within 365 days after award, with delivery at the same unit price. Late delivery results in monthly price reductions per unit, capped at a specified maximum, without limiting the Government’s right to terminate for default. All repairs must be performed under the contractor’s quality control system, with no substitutions allowed without written approval, and all documentation must include proper Distribution Statements in accordance with OPNAVINST 5510.1.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335312
New
Federal
Boat Engine
Solicitation # W911S226U3858
A 2-stroke, gasoline-powered, submersible, air-deployable outboard motor is being procured as a self-contained propulsion system for small craft, specifically qualified for CRRC airdrop configurations. The engine must feature through-hub exhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering, and immediate operability after submersion. It must meet or exceed EPA 3-star emissions ratings on gasoline and be brand new, domestically manufactured, with active management in the DLA Federal Logistics System under a designated National Stock Number. The required service kit includes essential consumables such as a 10-foot fuel line with primer bulb, XD10 oil, universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate with mixing unit to support fuel mixing, flushing, and long-term storage per manufacturer guidelines. The comprehensive service kit further includes a thermostat, thermostat cap gasket, anodes, spark plugs, fuel filter assembly and element, fuel line replacement kit, starter rope, stop switch lanyard, trim tab, water pump impellers, propeller assembly with hardware, thrust rod components, throttle wire, water pump replacement kit, and cowling strap replacement kit to ensure operational readiness and extended service life. The solicitation, identified as W911S226U3858, is a Small Business Set Aside under NAICS 335312, issued by the Department of Defense via the Office at Fort Drum, New York, with responses due by August 5, 2026.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335312
New
DIBBS
Magnetic Contactor Supplier (NSN: 6110016827290, Part No: MX52CD)The contract requires the supply of a single magnetic contactor identified by NSN 6110016827290 and Part No MX52CD, fabricated to meet military specifications, ensuring compliance with performance, durability, and environmental standards expected for defense applications. The vendor must provide the item with appropriate packaging and labeling in accordance with military requirements, including accurate identification markings and documentation. Delivery is to be made FOB Origin within five business days of order placement, underscoring the urgency and time-sensitive nature of the procurement. The item is associated with NAICS code 335312, indicating it falls under electrical equipment manufacturing, and is being procured under the Department of Defense’s Maritime Supply Chain ESOC Buys initiative. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the place of performance is specified as Little Falls, Minnesota, 56345-4173, though the exact ship-to location is not detailed. The transaction is classified as a subcontract, and no set-aside provisions are indicated, leaving eligibility open to all qualified suppliers capable of meeting the technical and timeline demands.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
Magnetic Contactor Supply (NSN 6110-01-437-9870)The contract calls for the supply of two magnetic contactors identified by military National Stock Number 6110-01-437-9870, fully compliant with Department of Defense technical specifications, including all required packaging, labeling, and accompanying documentation. The items must meet stringent DLA standards to ensure operational reliability in military applications, with delivery expected to the specified performance location at Pearl Harbor, Hawaii, under the zip code 96860-5033. The solicitation, classified as a subcontract, is issued under NAICS code 335312 and managed by the Maritime Supply Chain under the Department of Defense. Responses are due by August 10, 2026, with the requirement posted on July 28, 2026, allowing vendors adequate time to prepare and submit qualified proposals through the official DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334412
New
DIBBS
ELECTRONIC COMPONEN
Solicitation # SPE7M1-26-T-237M
This contract under solicitation SPE7M1-26-T-237M pertains to the procurement of one electronic component identified by NSN 5998-01-659-2133, with a required delivery within 20 days of award and delivery terms set at FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific design control tied to multiple revision-controlled drawings dated between 2009 and 2024. Packaging and preservation must adhere to MIL-STD-2073-1E and the special packaging instruction SPI AM1305671 dated September 12, 2024, while labeling follows MIL-STD-129 and palletization complies with DLA Packaging Requirements. The contract mandates Cybersecurity Maturity Model Certification Level 2 self-assessment and applies Covered Defense Information protocols. Inspection and acceptance occur at origin, with zero variance allowed in quantity. The delivery destination is Camp Carroll, Waegwan, South Korea, and shipping must follow DLA transport procedures C19 and C20. The supplier must also comply with requirements for removal of government identification from non-accepted supplies and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. All documentation, marking, and unit of issue must align with DLA and ANSI standards.
Bare Printed Circuit Board Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237Q
The contract specifies the procurement of piston rings identified by part number 18-20420-8R1 and NSN 4310017062926, with a total quantity of four units divided into two line items: two units at $4.00 each and two units at $2.00 each, both totaling $12.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance—exactly four units must be delivered. All items must be prepared for shipment in compliance with MIL-STD-2073-1E packaging standards, marked according to MIL-STD-129, and palletized per DLA’s RP001 requirements. Special marking is not required. Shipment must be sent via the fastest traceable method, strictly prohibiting parcel post, and delivered to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. The original required delivery date is July 27, 2026, and the contract is governed by Department of Defense logistics procedures including DLA Procurement Notes C19 and C20 for transportation. The solicitation number is SPE7M1-26-T-237Q, under NAICS code 333912, and the point of contact for inquiries is Michael Reese at DLA.
Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-Q-1274
The contract specifies the procurement of 120 kits of thegas detector with NSN 6665-01-690-8588 under solicitation SPE7M1-26-Q-1274, issued as a total small business set-aside with a firm fixed price structure. Delivery is required within 100 days after award, with FOB origin and inspection and acceptance occurring at the destination. Packaging and preservation must comply strictly with MIL-STD-2073-1E, Appendix D, for kits, requiring that all components be individually protected against corrosion and damage, with loose hardware sealed in bags or boxes and no bulk shipping permitted. Preservation methods must match the most critical item within each kit, and every kit must include a parts list detailing component names, numbers, and quantities. Marking must adhere to MIL-STD-129, including serial numbers on unit, intermediate, and shipping containers, with matching serial data on the packing list. Packaging must also follow DLA’s standardized requirements and avoid any mercury or mercury compounds. The contract mandates zero-defect acceptance sampling under MIL-STD-1916 or equivalent zero-based plans, with verified attributes assigned specific verification levels or AQLs, and any unspecified attributes treated as major. If MIL-STD-105/ASQ Z1.4 is used, acceptance requires zero non-conformances unless otherwise stated. The detector model is specified as Honeywell Analytics Inc. P/N HU-X1W1H1M1Q1-Y-NV, and may contain batteries, subject to hazardous material handling rules. Pricing is structured in tiered quantity brackets from 120 to 300 units, with delivery scheduled at 100 days for all tiers. A required unit of issue is KT (kit), and all packaging elements must be fully compliant with DLA’s packaging requirements, including proper labeling and segregation per MIL-STD-2073-1 Appendix D. The contract includes technical and quality requirements referenced from the DLA Master List, and all materials must arrive in fully serviceable condition without requiring further sorting or repackaging by the end user.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
TRANSDUCER, SERVOVAL
Solicitation # SPE7M1-26-T-238D
This contract pertains to the procurement of a transducer, servovalve identified by NSN 4810-01-153-8090, with a quantity of six units to be delivered within 70 days under solicitation SPE7M1-26-T-238D. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management protocols, and inspection and acceptance procedures conducted at origin. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, while marking follows MIL-STD-129 without special codes, and palletization aligns with DLA packaging guidelines. Delivery is FOB origin to the specified warehouse in Tracy, California, with no variance allowed in quantity. The contract prohibits intentional inclusion of mercury or mercury-containing compounds except in specified functional applications such as batteries, instruments, or Navy-controlled systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies that unit identification is not required, and transportation logistics are governed by DLA procedural notes C19 and C20. The required delivery date is December 4, 2027, though an earlier ship date of October 20, 2026, has been indicated. The point of contact for inquiries is Sara Wilson of the Department of Defense, Maritime Supply Chain.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-238C
This contract issued by the Defense Logistics Agency pertains to the procurement of magnetic contactors under NSN 6110011019710 and part number 70550-02028-101, with quantities of 61 units required at a unit price of $61.00 for a total contract value of $3,721. The product is classified as a critical application item for Sikorsky Aircraft Corporation, Te Connectivity Corporation, and National Machine Company, and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the supplied hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked according to MIL-STD-129 with no special marking codes, and palletization must meet DLA packaging standards. Delivery is FOB origin with zero variance permitted and inspection and acceptance occurring at the destination. The required delivery date is January 2, 2027, with a shipment deadline of January 11, 2027, and delivery must be completed within 153 days of award. The solicitation was issued under a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 10, 2026, and procurement is governed by DLA procedures for transportation and shipping to Corpus Christi, Texas.
Relay and Industrial Control Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-237G
The contract pertains to the procurement of one magnetic contactor starter unit with NSN 6110-01-411-9297, supplied by General Electric Company under solicitation SPE7M1-26-T-237G. Deliveries are due within 20 days of contract award and must be shipped FOB destination with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking with no special codes. The item is to be delivered to USNS PILILAAU T AKR 304 in FPO AP 96675, with transportation governed by DLA procedural notes C19 and C20. Strict sampling protocols apply per MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise stated, with attributes designated as critical, major, or minor and corresponding verification levels or AQLs assigned accordingly. Mercury and mercury-containing compounds are prohibited in any hardware or supply unless specifically exempted for functional uses such as batteries, fluorescent lamps, or controlled instruments, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by solicitation or award date depending on acquisition size. All requirements are binding, and the contractor must adhere to the designated unit of issue, delivery schedule, and government-specific identifiers for compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M1-26-T-238H
The contract specifies the procurement of one unit of a motor controller with NSN 6110015270208 and part number PL215-023-010, supplied by Carolina Power Systems of Sumter Inc, designated as a critical application item. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the final destination. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines, including palletization requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be labeled and shipped according to DLA procedures, with delivery addressed to USS SAN ANTONIO LPD 17 at FPO AE 09587, under shipment code RDD 777 and transportation reference DLAD PROC NOTES C19 and C20. The original required delivery date is July 2, 2026, and the contract is governed by solicitation SPE7M1-26-T-238H under a federal procurement framework managed by the Department of Defense’s Maritime Supply Chain.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-238F
This contract specifies the procurement of 42 units of a fixed chip resistor with part number TNPW121034K0BETA from VISHAY DALE ELECTRONICS, LLC, identified by NSN 5905-01-689-2990. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-39032 for resistors, and MIL-STD-129, with special marking code ZZ-ZZ applying. The item must be delivered FOB origin within 84 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, California. The need ship date is November 3, 2026, and the original required delivery date is December 31, 2026. The unit of issue is each, priced at $42.00 per unit for a total value of $1,764. Transportation logistics follow DLA Procurement Notes C19 and C20, and all packaging must align with palletization standards outlined in RP001. The contract is issued under solicitation SPE7M1-26-T-238F, with responses due by August 10, 2026, and falls under NAICS code 334416 for electronic component manufacturing.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
COMPRESSOR UNIT, REC
Solicitation # SPE7M1-26-T-237J
The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237P
The contract is for one piston ring with part number 18-20419-12R1 and NSN 4310-01-706-4138, issued by the Defense Logistics Agency under solicitation SPE7M1-26-T-237P. Delivery is required within 20 days of contract award, with shipments to be delivered FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. Palletization must follow DLA’s RP001 packaging requirements, and parcel post is prohibited—shipment must be sent by the fastest traceable means. The required delivery date is July 27, 2026, and the contract is assigned to DLA vendors who must use the VSM system for fulfillment. The item falls under NAICS code 333912 and is procured by the Department of Defense through the Maritime Supply Chain office.
Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237L
The contract pertains to the procurement of one piston ring, part number 18-20416-7R1 and NSN 4310-01-706-3788, under solicitation SPE7M1-26-T-237L, with a required delivery within 20 days of award to the USS HYMAN G RICKOVER at FPO AE 09591. The item must be delivered FOB destination with zero variance in quantity and is subject to inspection and acceptance at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Supplier shipment must be made via the fastest traceable means, excluding parcel post, using the V27157 vendor code and RDD 777 for logistics tracking. The contract specifies the unit of issue as each, priced at one dollar, with total price reflecting the single unit. The supplier is directed to use VSM for DLA shipments, and the procurement is tied to project JK5 TP 3 under supply chain support code YNEA01. All delivery logistics, transportation procedures, and compliance are bound by DLA procedural notes C19 and C20, and the contract includes a required delivery date of July 27, 2026.
Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details