Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on January 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Rip Rap Slope Native Plants Restoration Project

Closed
25-58159International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
Environmental Consulting ServicesThe contract requires the provision of comprehensive environmental consulting services including environmental site assessments, wetland delineation, NEPA compliance documentation, and stormwater pollution prevention planning. These services are intended to support regulatory adherence and environmental stewardship across projects under the jurisdiction of the State of Utah, with performance expected to meet federal and state environmental standards. The work involves technical expertise in identifying environmental risks, delineating protected wetland boundaries, preparing documentation to satisfy National Environmental Policy Act requirements, and developing effective stormwater management plans to mitigate pollution. The opportunity is posted as a subcontract under NAICS code 541620, indicating a focus on environmental consulting, and is open for responses until September 7, 2026. It is not subject to any specific set-aside provisions and is available to qualifying subcontractors capable of delivering the full scope of environmental services. While the agency details are listed under Utah with no specific office address or point of contact provided, bidders must be prepared to perform work wherever required within the state. Interested parties should submit proposals before the deadline and ensure they have the technical capacity, certifications, and experience necessary to meet the rigorous demands of the environmental services outlined.
Utah

POSTED

about 24 hours ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Compliance and Documentation ServicesThe contract is for Environmental Compliance and Documentation Services under a subcontract awarded by Marine Maintenance for the Port of Seattle, aimed at ensuring full regulatory adherence during excavation and waste management operations. The work supports compliance with standards set by the EPA and state environmental agencies, with a strong focus on maintaining audit-ready records and proper documentation throughout all phases of activity. This includes tracking, reporting, and managing paperwork required for regulatory inspections and environmental audits to minimize risk and uphold legal obligations in real-time operational environments. The services are classified under NAICS code 541620, indicating environmental consulting and related technical support, and are intended to provide continuous compliance assistance wherever excavation and hazardous or non-hazardous waste handling occurs under the Port’s jurisdiction. The contract does not specify a geographic location beyond the Port of Seattle, and while no set-aside provisions are in place, the solicitation is posted as of July 2026, with a public-facing link available for further details. The scope demands expert knowledge of federal and state environmental regulations and the ability to produce clear, accurate, and timely documentation that meets both operational needs and regulatory scrutiny.
Marine Maintenance

POSTED

1 day ago

DEADLINE

N/A
NAICS: 541620
New
SLED
Comprehensive Regional Resilience PlanningThe contract titled Comprehensive Regional Resilience Planning is a subcontract issued by the Coastal Bend Council of Governments in Texas to develop regional strategies that address climate-related risks including sea-level rise, flooding, and disaster recovery planning for coastal communities. The work requires the contractor to design, implement, and coordinate resilience initiatives that enhance community preparedness and adaptive capacity in the face of escalating environmental threats. The scope centers on integrating scientific data, stakeholder input, and policy frameworks to create actionable, region-specific plans that support long-term sustainability and emergency response capabilities. Responses to the solicitation are due by August 31, 2026, and the effort falls under NAICS code 541620, indicating it involves environmental consulting services. The contract does not specify a set-aside type or a defined place of performance beyond the broader Texas coastal region, and the performance location remains unspecified in the posted details. The opportunity is accessible via the Texas SmartBuy portal, and while no point of contact information is provided, interested parties must submit proposals prior to the deadline to be considered for award. The initiative underscores a strategic focus on localized climate adaptation with broad implications for public safety, infrastructure planning, and regional economic stability.
COASTAL BEND COUNCIL OF GOVERNMENTS

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental and Regulatory Compliance ConsultingThe contract is for Environmental and Regulatory Compliance Consulting with a focus on coordinating CEQA documentation and ensuring adherence to state environmental regulations and agency mandates, specifically those from the Division of the State Architect and the Office of the State Fire Marshal. The work will be performed in Sacramento and requires expertise in navigating complex environmental review processes, interfacing with regulatory bodies, and delivering compliant documentation in alignment with California’s environmental standards. The contract is structured as a subcontract under NAICS code 541620, which classifies it as environmental consulting services, and it is being procured by the California Department of General Services on behalf of the state. The opportunity was posted on July 24, 2026, with a response deadline of August 20, 2026, indicating a timeline for proposers to submit qualifications and technical approaches. There is no specified set-aside or preference category, and no point of contact information is provided in the data. Interested parties must respond through the California eProcurement portal at the provided link, and the work will require demonstrated experience in environmental compliance, regulatory coordination, and familiarity with California’s public infrastructure regulatory environment. The absence of detailed performance metrics or deliverables in the data suggests proposers will need to clearly articulate their methodology and experience to meet the stated objectives.
California Department of General Services

POSTED

2 days ago

DEADLINE

in 24 days

General Info

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

British Columbia, CAN

Set-Aside

NONE

Documents

(10)

25-58159_Amendement2_FR.pdf

PDF

25-58159_Amendement3_FR.pdf

PDF

25-58159_NPP_FR.pdf

PDF

25-58159_RFP_EN.pdf

PDF

25-58159_Amendment2_EN.pdf

PDF

25-58159_Amendement1_FR.pdf

PDF

25-58159_Amendment3_EN.pdf

PDF

25-58159_NPP_EN.pdf

PDF

25-58159_Amendment1_EN.pdf

PDF

25-58159_RFP_FR.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
Contacts
Isabelle FortinContracting Authority

Full Description

Show more
The National Research Council Canada (NRC) requires Rip Rap Slope Native Plants Restoration Project at 5071 West Saanich Road Victoria, BC. The contract period will be for three years from the date of contract. The anticipated start date is January 2026. Mandatory Site Visit: It is mandatory that the Bidder or a representative of the Bidder visit the work site. Arrangements have been made for the site visit to be held. Meet Marilyn Bell at the main entrance at the National Research Council, 5071 Chemin West Saanich Victoria, British Colombia. V9E 2E7 on December 15th 2025. The site visit will begin at 1:00PM - PST. NO EXCEPTIONS WILL BE MADE. Basis of selection: Lowest evaluated price Tenders must be submitted to the NRC Bid Receiving Unit at: NRC.BidReceiving-ReceptiondesSoumissions.CNRC@nrc-cnrc.gc.ca Bidders may request a debriefing on the results of the bidding process. Bidders should submit their request to the contracting authority within 15 working days of receiving the results of the bidding process. The debriefing may be provided in writing, by telephone, or via MS Teams. Refer to the attached tender documents to obtain further information. Canada retains the right to negotiate with any supplier on any procurement. Documents may be submitted in either official language of Canada. Procuring Office: National Research Council Canada Nom: Isabelle Fortin Titre: Senior Contracting Officer Courriel: Isabelle.Fortin@cnrc-nrc.gc.ca

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 541512
New
International
Technical Architecture and Systems Design – Level 3The contract seeks a Level 3 technical architecture and systems design partner to support the Mercury Program migration efforts by delivering detailed technical architecture designs, comprehensive system integration planning, and a forward-looking technology roadmap. The work requires expertise in aligning complex system components, ensuring seamless interoperability, and defining scalable infrastructure strategies to transition legacy systems to modernized platforms. The contractor will be expected to provide actionable insights and structured planning that guide the program’s long-term technological evolution, with a focus on stability, security, and future-readiness. The opportunity is classified as a subcontract under NAICS code 541512, issued by the National Research Council of Canada on behalf of the Government of Canada, with performance required within the National Capital Region. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 12, 2026. While no set-aside provisions or specific eligibility criteria are outlined, the nature of the work implies a need for proven experience in federal migration projects, cloud-native systems, and enterprise architecture frameworks. Potential bidders should note the absence of a designated point of contact and should rely on the official Canadian Buys portal for full submission details.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 449110
New
International
FurnitureThis procurement under solicitation number 25-58244 B is issued by the National Research Council of Canada for the purchase, delivery, and installation of office furniture at Building M-38, 1200 Montreal Road, Ottawa, Ontario, with a required delivery and installation date of October 2, 2026. The requirement is solicited exclusively through the PWGSC Furniture for Workspaces Supply Arrangement (SA) # E60PQ-140003/D or E60PQ-140003/PQ, limiting participation to pre-qualified supply arrangement holders. The scope encompasses Product Categories 1 through 6, including work station systems, work surfaces, filing and storage products, ancillary items such as monitor arms, power modules, and cable troughs, and collaborative products including meeting and collaborative tables, with specific quantities outlined for each line item. All products must conform to the mandatory technical specifications in Annex A and comply with the ANSI/BIFMA e3 Furniture Sustainability Standard at minimum Level 2, alongside the Government of Canada Workplace Fit-up Standards. Offerors must submit fully completed technical and financial offers in separate electronic attachments, restricted to a maximum size of 10MB, with no zip files, links, or paper submissions permitted. Financial information must be contained solely within the financial offer; inclusion of pricing in the technical submission results in disqualification. Two mandatory pass/fail gates require submission of detailed drawings and specifications for NRC verification against Annex A and confirmation of the ability to meet the October 2, 2026, delivery deadline. Offers are evaluated on the lowest price basis, with contract awards made on a per-category basis. Security requirements governed by the attached Security Requirements Checklist (SRC) apply, and contractors must comply with site-specific health and safety plans. Offerors must certify ongoing compliance with all qualification certifications under the SA, including integrity provisions, employment equity, product conformance, and price certification per Part 6B of the SA. Failure to truthfully complete certifications or provide requested verification may result in an offer being deemed non-responsive or contract default. All communications must be directed to the designated contracting authority, and inquiries must be submitted at least three business days prior to the closing deadline of July 22, 2026. Invoices must be sent via email to the designated NRC invoice address, and payment may be processed by credit card if the supplier’s SA permits it. The requirement is
Furniture Retailers

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and CopperThe National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system specifically designed to reliably cut aluminum and copper for battery prototype components, under solicitation number 26-58021. The system must feature a fiber-type laser with a minimum power rating of 3000W and a 10:1 operational turn-down ratio, capable of cutting 0.16-inch aluminum and 1/8-inch copper at a minimum speed of 1 meter per minute. The work area must range between 400x300mm and 635x635mm, with a Z-axis of at least 50mm and positioning precision of 0.1mm or better. Key system requirements include an auto-tracking laser head, fully enclosed operation area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system to manage back-reflected laser energy. The contract encompasses delivery, installation, commissioning, and training, with all components to be delivered to the NRC Building U91 at 2320 Lester Road, Ottawa, Ontario. Offers must comply with Incoterms® 2020 Delivery at Place (Vancouver, BC) and include all shipping, customs, and duty costs. The acquisition is restricted to Canadian suppliers under the Policy on Reciprocal Procurement and subject to multiple free trade agreements. Submission of proposals is strictly electronic, with offers divided into three separate email attachments labeled Technical Offer, Financial Offer, and Forms—including the Offer Submission Form and Offeror Declaration Form—each not exceeding 10MB total and with no compressed files or external links permitted. Offers must be received by 2 PM EDT on July 27, 2026, and signed by an authorized representative. Mandatory technical criteria, identified with the terms “must” or “mandatory,” are detailed in Annex F and form a pass/fail gate; only offerors meeting all such criteria will be invited to submit sample cuts for verification. Financial offers must adhere to the Basis of Payment outlined in Annex D and clearly separate applicable taxes. Payment terms specify a 30-day period for undisputed invoices, with a 15% withholding for non-resident contractors unless waived by the Canada Revenue Agency. The Contractor must establish an accounting system allowing Canada to identify contract records and must provide all invoices to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca with full expenditure details, contract number,
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
International
26-58113 Universal Testing Machine with non-contact Extensometer for polymer researchThe National Research Council of Canada is seeking a Universal Testing Machine equipped with a non-contact extensometer for polymer research through a selective procurement process set aside exclusively for Indigenous suppliers under the federal Procurement Strategy for Indigenous Business. The equipment must meet ASTM and ISO standards for measuring tensile and flexural properties of polymer films, sheets, composites, and molded products. Delivery, installation, commissioning, and training must be completed by the end of February 2027 at the NRC’s facility in Winnipeg, Manitoba. Only invited Indigenous businesses are eligible to bid, and selection will be based on compliance with mandatory technical criteria and the lowest aggregate price. All bids must be submitted electronically to the designated NRC address by 2 PM EDT on August 7, 2026, and may be in either official language of Canada. The contract is governed by the Government of Canada’s Integrity Regime and tied to the GSIN N6640 under UNSPSC 41100000 for laboratory equipment. The procurement is accessible only through the Government Electronic Tendering Service, and amendments or responses to inquiries will be communicated directly to invited bidders only; no third-party notifications are guaranteed. The National Research Council emphasizes strict adherence to the set-aside provisions and requires bidders to be registered in the Indigenous Business Directory to qualify for consideration. The contract will be awarded to the single lowest-priced compliant Indigenous bidder, with no exceptions. Melody Ellis, Team Leader of Procurement and Contracting Services, serves as the primary point of contact for all inquiries and must be engaged directly for procedural clarification. Bidders are reminded that Canada assumes no liability for information sourced from external websites or for oversight resulting from reliance on third-party notification services.
Analytical Laboratory Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 423410
New
International
Two (2) Highspeed (15000 fps) CamerasThe National Research Council of Canada is seeking to procure two high-speed cameras capable of recording at 15,000 frames per second through Solicitation 26-58112, with delivery required in Ottawa, Ontario. This procurement is restricted exclusively to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for Laboratory and Scientific Equipment, Parts and Accessories, Services and Supplies, and only those suppliers have been invited to submit bids. The solicitation follows a selective tendering process under a competitive procurement strategy that awards the contract to the lowest compliant bid. The notice is published on the Government Electronic Tendering Service for 40 calendar days, with responses due by August 10, 2026, and all bids must comply with a range of international trade agreements including CETA, CPTPP, WTO-AGP, and several bilateral free trade agreements to which Canada is a party. Suppliers not holding the specified supply arrangement are ineligible, and any submissions from non-qualified vendors will not be considered. The award will be made to the responsive bidder with the lowest aggregate price who meets all mandatory technical requirements. Interested parties who are not yet qualified may apply to join Supply Arrangement E60PV-19EQUI by downloading the solicitation document from CanadaBuys and submitting a proposal in accordance with its requirements. All inquiries and submissions should be directed to Helen Tran, Senior Procurement Officer at the National Research Council.
Photographic Equipment and Supplies Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 334513
New
International
26-58075 Radio Frequency (RF) Test and Measurement SuiteThe National Research Council of Canada is seeking a fully integrated Radio Frequency (RF) Test and Measurement Suite comprising a signal generator capable of producing signals from 10 kHz to 50 GHz with an integrated frequency multiplier capable of extending output to 110–170 GHz, a signal/spectrum analyzer with a measurement range up to 50 GHz, and a vector network analyzer operating up to 44 GHz. The system must function as a unified solution with centralized control and be designed for high-precision applications in quantum metrology, where phase noise, harmonic distortion, and long-term frequency stability are critical to accurate sensor operation. The signal generator must accept external 10 MHz or 100 MHz references for enhanced stability, and the multiplier must be seamlessly controllable through the same interface as the generator. The spectrum analyzer must accurately characterize signal strength, harmonics, and spurious emissions, while the vector network analyzer must measure both magnitude and phase of RF components across temperature conditions, including cryogenic environments. All equipment must comply with mandatory technical specifications covering frequency range, phase noise, harmonic levels, phase stability, and multiplier functionality, with full compliance required to be considered for award. The solicitation follows a Lowest Price Technically Acceptable (LPTA) procurement strategy, where only offers meeting all mandatory technical criteria are evaluated, and the award will be granted to the lowest-priced compliant proposal. Proposals must be submitted electronically by August 14th, 2026, at 2:00 PM EDT, as two separate, unzipped files labeled “Technical Offer” and “Financial Offer,” with a combined size not exceeding 10 MB. Delivery of the completed suite is due by January 15th, 2027, at the NRC facility in Ottawa, under Incoterms® 2020 DAP terms, with full documentation—including operating procedures, remote command sets, troubleshooting guides, and technical specifications—required in both PDF and hard copy. The contract includes an irrevocable option for additional goods or services under the same terms, and contractors must comply with Canadian reciprocal procurement rules, anti-forced labor policies, international sanctions, and the Federal Contractors Program for Employment Equity. Environmental standards mandate reusable, recyclable, or returnable packaging, and all submissions are subject to review and final acceptance by the Government of Canada. Proposals must also include completed certifications affirming integrity, eligibility, and compliance with all contractual conditions, and only Canadian suppliers or those
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

4 days ago

DEADLINE

in 19 days
View Details