Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-U-3653Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,513 blind rivets under NSN 5320-01-606-9619. The contract is designated as a total small business set-aside under NAICS code 488190 and is being procured as fully competitive in accordance with military or federal specifications. Delivery is required within 144 days after the order is placed. The agreement incorporates several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. While covered defense information potentially applies, item unique identification is not required per the service customer's request. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026.

General Info

DoD seeks 1,513 blind rivets via small business set-aside, delivery within 144 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE4A6-26-U-3653 Request for Quotations

PDF•20 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Faye Harvell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5320-01-606-9619 Quantity: 1,513 EA Purchase Request: 1000241440QTY: 1513 Delivery: 144 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
INSULATION SLEEVING, TH
Solicitation # SPE8E6-26-T-4496
This contract is for the procurement of 52 units of Type I preformed pipe thermal insulation sleeving made of fibrous glass, conforming to MIL DTL 32585. The specified dimensions for the sleeving are 1.500 inches in thickness, 1.900 inches in inside diameter, and 36.000 inches in length. The items are identified by NSN 5640-00-841-5217 and must be delivered to DLA Distribution San Joaquin in Tracy, California. A critical requirement for vendors is the submission of a Health Hazard Assessment approved by the Navy Marine Corps Public Health Center at the time of the offer. The contract mandates adherence to DLA packaging requirements and MIL-STD-129 for marking and labeling. Delivery is expected within 167 days, with a required delivery date of May 7, 2027. Quality compliance is managed through a Certificate of Quality Compliance and specific Technical Data Package requirements.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
TUBE
Solicitation # SPEFA5-26-T-1068
This contract is for the procurement of one tube, identified by NSN 1560-LL-NCB-5975 and Bell Textron Inc part number 212-063-505-101. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 84 days, with a final required delivery date of March 1, 2027, shipped FOB destination to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and RQ001 for higher level quality standards. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE RUBBER AE701-6
Solicitation # SPEFA5-26-T-1072
This contract is for the procurement of 220 inches of rubber hose, part number AE701-6 from Eaton Aeroquip LLC, under solicitation number SPEFA5-26-T-1072. The order is managed by the DLA Fleet Readiness Center and specifies a delivery timeframe of 9 days after order. The material has no shelf life requirement and allows for a quantity variance of plus or minus 10 percent. Technical and quality standards are governed by the DLA Master List, with specific requirements for physical identification and packaging according to ASTM D3951, MIL-STD-129, and RP001. Sampling must comply with MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, North Carolina.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSY
Solicitation # SPEFA5-26-T-1070
This contract is for the procurement of two hose assemblies, identified by NSN 1560LN0035610 and Bell Textron Inc part number 70-061F000Z140A. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 84 days, with a final required delivery date of March 1, 2027. The shipment is set for FOB destination, with both inspection and acceptance occurring at the destination in Cherry Point, North Carolina. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance unless otherwise specified. The procurement is managed by the DLA Fleet Readiness Center under solicitation number SPEFA5-26-T-1070.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
EXTRUDED RUB SEAL MIL-
Solicitation # SPEFA5-26-T-1069
This contract is for the procurement of an extruded rubber seal, part number 110-004-25, conforming to MIL-R-6855 Class 2 Type A Grade 50 specifications. The order consists of 6 feet of material, with a permitted quantity variance of plus 10 percent and minus 0 percent. A certificate of quality conformance is required, and the material must be packaged according to ASTM D3951 and DLA packaging requirements to prevent damage during shipment. The delivery is set for FOB Destination to the Fleet Readiness Center East in Cherry Point, North Carolina, with a required delivery date of September 4, 2026, and a delivery window of 5 days after receipt of order. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331 standards. The item does not have a shelf life requirement and must be shipped via the fastest traceable means, specifically excluding parcel post.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SUPPORT
Solicitation # SPEAF5-26-T-1064
This contract is a solicitation from the Department of Defense, specifically the DLA Fleet Readiness Center, for the procurement of two units of material identified by NSN 1560-LL-NCB-5342 and associated Bell Textron Inc part numbers. The agreement specifies a delivery timeframe of 15 days and requires delivery FOB destination to Cherry Point, North Carolina. There is no shelf life requirement for this material, and the quantity variance is set at plus or minus 0 percent. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to MIL-STD-130N for identification marking and RP001 for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must align with DLA procurement requirements.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
BAR, BORING TOOL
Solicitation # SPE8E5-26-T-4197
This contract is for the procurement of 16 boring tool bars, identified by NSN 3460-01-625-8849 and part number OMT-GD54 from Leblond Ltd. The order is managed under solicitation SPE8E5-26-T-4197 for the Department of Defense, with delivery required at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is May 24, 2027, with a shipping window of 167 days. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
TUBE
Solicitation # SPEFA5-26-T-1008
This contract is a solicitation for the procurement of two tubes, identified by NSN 4710LLNCB6720 and Bell Textron Inc part number 212-076-271-1. The item is designated as a critical application item and is subject to specific technical and quality requirements as outlined in the DLA Master List. Delivery is required within 11 days after receipt of order, with the final destination being the Fleet Readiness Center DLA in Cherry Point, North Carolina. The agreement mandates strict adherence to MIL-STD-130N for identification marking and ASTM D3951 for packaging, with palletization following RP001 requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, emphasizing zero non-conformances for acceptance. There is no shelf life requirement for this material, and the contract specifies a zero percent quantity variance.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
DIBBS
SPREADER, SLING
Solicitation # SPE8EE-26-T-2522
Contract SPE8EE-26-T-2522 is a solicitation for the procurement of sling spreaders, specifically part number EP-0015815 from Independent Rough Terrain Center LLC, identified by NSN 3940016261016. The agreement covers two line items, each for a quantity of one unit, with a required delivery date of September 4, 2026. Delivery is required within 20 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Shipments must be sent via traceable means to designated locations at Joint Base Lewis McChord in Washington. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information and the removal of government identification from non-accepted supplies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
SLING, EYE
Solicitation # SPE8EE-26-T-2501
This contract, identified as solicitation SPE8EE-26-T-2501, is for the procurement of 31 units of Eye Slings, identified by NSN 3940-01-626-0971 and part number EP-0010593 from Independent Rough Terrain Center LLC. The order is managed by the Department of Defense under purchase request 7018160545, with a required delivery date of December 7, 2026, and a need ship date of March 1, 2027. Delivery is set for 167 days after order, with FOB origin and inspection and acceptance occurring at the destination. The shipment is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, specifically referencing RA001, RD003, RP001, and RQ011. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA packaging requirements taking precedence. The contract specifies a zero percent quantity variance for the order.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
7085-T7651 PLATE AMS43
Solicitation # SPEFA5-26-T-1067
This contract is for the procurement of one 7085-T7651 aluminum plate measuring 4.5 by 4.5 by 120 inches, conforming to AMS4329 Revision C. The order is issued by the Defense Logistics Agency for delivery to the Fleet Readiness Center East in Cherry Point, North Carolina. A certificate of quality conformance and specific metal certification data are required, and the material must be marked and identified according to RQ017. The supplier must adhere to DLA packaging requirements and ASTM D3951 to prevent damage during shipment, with labeling following MIL-STD-129. Quality sampling must comply with MIL-STD-1916 or ASQ H1331. Delivery is required within five days after receipt of the order, with the final inspection and acceptance occurring at the destination.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
HOSE RUBBER AE701-6
Solicitation # SPEFA5-26-T-1071
This contract is for the procurement of 220 inches of rubber hose, part number AE701-6 from Eaton Aeroquip LLC, under solicitation number SPEFA5-26-T-1071. The material is identified by NSN 4720-LL-NCA-2000 and is destined for the Fleet Readiness Center DLA in Cherry Point, North Carolina. Delivery is required within 9 days after the order, with a quantity variance allowance of plus or minus 10 percent. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per ASTM D3951 and RP001, and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The material has no shelf life requirement.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3552
This contract is for the procurement of 862 blind rivets, identified by NSN 5320-01-305-4160 and part number NAS1669-4DL3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the applicable non-government standards, specifically NAS1669 and NAS1675. The solicitation is a total small business set-aside under NAICS code 332510, issued by the Department of Defense ASC Commodities Division. Delivery is required within 221 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in the sample lot unless otherwise specified.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3665
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 2,490 blind and solid rivets under National Stock Number 5320-01-620-4782. The contract is designated as a total small business set-aside under NAICS code 332722. Delivery is required within 94 days after receipt of the order. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. All items must adhere to MIL-STD-130N for the identification marking of U.S. military property. Responses to solicitation SPE4A6-26-U-3665 are due by September 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3537
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 3,957 blind rivets under NSN 5320-01-185-2870. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 252 days after the order is placed. The agreement mandates strict adherence to DLA packaging, technical, and quality requirements, including specific protocols for configuration change management and bare item marking. Notably, the contract contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training to access sensitive information.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-22GC
Solicitation SPE4A6-26-T-22GC is a total small business set-aside issued by the DLA Aviation ASC Commodities Division for the procurement of 1,797 pin-rivet collars under NSN 5320-00-298-6212. This critical application item must be manufactured according to TDP Rev C Gen 3 and specific reference drawings, including drawing 76301 23M117 Revision R. The required delivery date is April 25, 2027, with a need ship date of February 12, 2027, for delivery to DLA Distribution Warner Robins in Georgia. The contract mandates strict quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and all Class 3A and 3B threads must be gaged according to SAE AS8879 or MIL-S-7742. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance are both designated at the point of origin. Additionally, the provider must meet CMMC Level 2 self-assessment requirements and comply with the Buy American Act and Berry Amendment regarding domestic material sourcing.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BF
This contract is for the procurement of blind rivets, specifically part number NAS1921B05-03 under NSN 5320001652084. The total quantity requested is 14,171 units, split between two delivery locations: 4,121 units to DLA Distribution San Diego and 10,050 units to DLA Distribution Warner Robins. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable military or non-government part standards. Delivery is required within 99 days, with specific need ship dates in May and July 2026 and a final required delivery date of March 2, 2027. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3619
This contract is a solicitation for the procurement of 2,221 machine bolts under NSN 5306-01-686-4912. The requirement is a total small business set-aside issued by the Department of Defense ASC Commodities Division. Delivery is required within 78 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The technical specifications follow ASME B18.24 Revision D and must adhere to the DLA Master List of Technical and Quality Requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must be performed according to ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-U-3676
This solicitation is for the procurement of 493 screw thread inserts, identified by NSN 5325015250116, for the Department of Defense ASC Commodities Division. The items must be manufactured according to the current revision of the SAE MA3279 standard and are designated as critical application items. The contract is a total small business set-aside under NAICS code 332510, with delivery required within 10 days after receipt of order. Quality assurance is stringent, requiring inspection and acceptance at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The procurement is handled as a DLA direct CONUS delivery with a zero percent quantity variance allowed.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EXTERNALLY RELIEV
Solicitation # SPE4A6-26-U-3703
This contract is for the procurement of 409 externally relieved hexagon head bolts, identified by NSN 5306014725391 and part number FTC 7590-3. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-U-3703 and is designated as a set-aside for Economically Disadvantaged Women-Owned Small Businesses. The items are classified as critical application items with a delivery requirement of 99 days and a strict zero percent quantity variance. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, packaging, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-U-3979
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-3979, is for the procurement of 885 units of Stud Assembly, Turnlock Fasteners. The items are identified by NSN 5325-01-408-7166 and part number 3506-SC38A-C3C, and are classified as commercial items. The contract is a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 66 days after receipt of order. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes provision RQ011 regarding the removal of government identification from non-accepted supplies. The response deadline for this solicitation is September 17, 2026, and the primary point of contact is April Wynn.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-U-3937
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 1,475 plain studs under solicitation number SPE4A6-26-U-3937. The items are identified by NSN 5307-01-145-1645 and are associated with part numbers from Parker Hannifin Corporation and Oshkosh Defense LLC. This is a total small business set-aside under NAICS code 332722, with delivery required within 40 days after receipt of order. The agreement specifies that delivery is FOB Origin, while inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific adherence to DLA packaging requirements for procurement. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-U-3862
This contract is for the procurement of 1,681 solid rivets, identified by NSN 5320-00-574-1091 and part number MS20470AD4-28. The items must adhere to technical specifications NASM20470 Revision 3 and NASM5674 Revision 2. This is a total small business set-aside under NAICS code 332722, managed by the Defense Logistics Agency ASC Commodities Division. Delivery is required within 37 days after the order, with FOB, inspection, and acceptance all occurring at the origin. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract incorporates various DLA master list technical and quality requirements, including specific mandates for bare item marking and the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-U-3675
Contract SPE4A6-26-U-3675 is a federal solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 180 machine screws. The items are identified by NSN 5305015292168 and part number 4131603-2 from Trivent Engineering, Inc. This is designated as a critical application item and a commercial item, with delivery required within 83 days after the order is placed. The shipping terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Identification marking must comply with MIL-STD-130N. Technical and quality requirements are governed by the DLA Master List, and the procurement includes a zero percent quantity variance. The primary point of contact for this acquisition is Faye Harvell.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details