This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
RIVET, SOLID
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of one solid rivet, identified by NSN 5320-01-467-6734 and part numbers AF2097O1E7C8 and WC272AE7-8, to be manufactured in strict accordance with Technical Data Package Rev B Gen 4 referenced to drawing numbers 88277 3D0272 Revision C dated 09/02/2004 and 13873 EI-014676734 Revision dated 07/08/2026. The item is designated as a critical application component, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with specific requirements identified by R and I numbers including source approval documentation, configuration change management, removal of government identification from non-accepted supplies, and physical bare item marking. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations, and the contract enforces safeguarding of covered defense information under DFARS 252.204-7012, with a deviation to NIST SP 800-171 DOD assessment requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Packaging must comply with ASTM D3951 unless superseded by DLA requirements, with all markings adhering to MIL-STD-129 and palletization in line with RP001. Delivery is FOB origin, with a five-day ADO window to Fort Hood, TX, and shipment must occur via the fastest traceable means, excluding parcel post. Inspection and acceptance occur at destination under FAR 52.246-2. Payment is subject to WAWF electronic submission, and the contractor must register with AMPS to access DLA’s Vendor Shipment Module. The solicitation is automated and may be awarded without formal evaluation if the offeror meets all technical, cybersecurity, and compliance gates, including submission of a Safety Data Sheet for any hazardous material. Domestic sourcing restrictions under the Buy American Act and Berry Amendment apply, with the Berry threshold reduced to
General Info
Agency
NAICS
Place of Performance
BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RIVET,SOLID
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE RQ032 OBJECT TEXT ID ST
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
CRITICAL APPLICATION ITEM
ALLFAST FASTENING SYSTEMS, LLC 53551 P/N AF2097O1E7C8
WEST COAST AEROSPACE, INC. 60516 P/N WC272AE7-8
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 88277 3D0272 REVISION NR C DTD 09/02/2004 PART PIECE NUMBER: 3D0272E7-8
SPE4A6-26-T-14RL
SECTION B
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 13873 EI-014676734 REVISION NR DTD 07/08/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016098947 0001 EA 1.000
NSN/MATERIAL:5320014676734
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
SPE4A6-26-T-14RL
SECTION B
PR: 7016098947 PRLI: 0001 CONT’D
US
MARKFOR
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
US
M/F: (TCN) W50YEF60830076
RDD: 098
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:03/31/2026
SPE4A6-26-T-14RL NSN/Part Number: 5320-01-467-6734 Quantity: 1 EA Purchase Request: 7016098947QTY: 1 Delivery: 5 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS