Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on June 29, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

RMDD & ESD Heavy Equipment Leasing and Rental

Awarded
M6739921Q0018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 532412
New
SLED
Contractor Operated Equipment & Equipment Hauling 968-72/988-26-26-050
Solicitation # 968-72/988-26-26-050
The North Dakota Department of Transportation (NDDOT) is soliciting bids for Contractor Operated Equipment and Equipment Hauling Services under solicitation number 968-72/988-26-26-050. The contract period runs from November 3, 2026, to June 30, 2027, and covers the provision of operated machinery—including dozers, snowcats, backhoes, and excavators—as well as the hauling of emergency snow removal equipment. Services will be performed in areas directed by District Personnel, with equipment hauling billed per running mile and machinery billed per running unit hour. All equipment must be equipped with hour meters that only record time while the engine is running. Award will be granted to the responsive offeror with the lowest priced bid, though the NDDOT may make multiple awards and will select contractors based on a combination of bid price, equipment availability, location of the event, and transport costs. In the event of a tie, preference is given to resident North Dakota offerors. Bidders must be registered in the NDBuys system and provide proof of required insurance coverage and Secretary of State registration prior to contract approval. The contract mandates strict compliance with North Dakota Administrative Code, Title VI non-discrimination assurances, and the Americans with Disabilities Act. Payment is issued via check or ACH following inspection and acceptance of services.

POSTED

about 24 hours ago

DEADLINE

in 5 days
NAICS: 532412
New
SLED
IFB 10222581 for Crane Rental with Operator, Oiler, and Rigger/Signal Person Services.
Solicitation # 10222581
The California Department of Water Resources issued Invitation for Bid 10222581 to secure as-needed crane rental services for the Oroville Field Division. The contractor is required to provide fully maintained cranes ranging from 30 to 300 tons, along with certified operators, oilers, and rigger/signal persons, to support routine services and unanticipated equipment failures. The anticipated contract term is three years, with a start date of June 1, 2027. Performance will take place at the Oroville Field Division and various other worksites within the department's jurisdictional boundaries. Key requirements include mandatory NCCCO certification for all operators and strict adherence to California Code of Regulations General Industry Safety Orders. Equipment must comply with Air Quality Management District rules, and the contractor must maintain a valid California Air Resource Board Certificate of Compliance. Bidders must commit to a minimum 3% Disabled Veteran Business Enterprise participation rate and pay workers the prevailing wage. The contract includes specific insurance mandates for general liability, workers compensation, and automobile liability. Bids are evaluated based on responsiveness and responsibility, with calculation preferences available for certified Small Businesses and those subcontracting with Small Businesses.
California Department of Water Resources

POSTED

1 day ago

DEADLINE

in about 1 month

General Info

Contract Value

$821,618.8

NAICS

532412 - Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

Place of Performance

Twentynine Palms, CA, 92278, USA

Set-Aside

8A

Award Issued Date

Documents

3

20Q0018+Amendment+2+QA+and+extension+28+June+2021.pdf

PDF

21Q0018+Amendment+1.pdf

PDF

21Q0018+RMDD+Final+Solicitation.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

Notice details unchanged. Attachments may have changed.

Type Changed

Presolicitation → Solicitation

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Response deadline changed from Jun 29, 2021 to Jul 2, 2021. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commanding Officer
Contacts2 people available
OfficeTWENTYNINE PALMS, CA, 92278-8108, USA
Office AddressTWENTYNINE PALMS, CA, 92278-8108, USA

Full Description

Show more
*Solicitation Amended 06/28/21- See 20Q0018 Amendment 2 QA attachment The reason for this amendment is to: - Extend the solicitation deadline to 2 JUL 2021 10:00 AM PDT. - See Q&A attachment Questions and responses.All other terms and conditions remain the same. SBA 8(a) Requirement Number is XX1617211944W In Accordance With (IAW) Section 8(a) of the Small Business Act (15 USC 637(a)(1)) SBA 8(a) Requirement Number is XX1617211944W and under Federal Acquisition Regulation (FAR) Part 19.8, FAR Part 12 and FAR Part 13.5. - QUOTES: Quotes are to be received no later than close of business (10 am PST) on June 29, 2021. - An organized site visit has been scheduled by - RMDD for Tuesday, June 23, 2021 at 0900 (EDT) *See Details on Solicitation This is a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract for one (1) base year and two (2) one-year option periods to supply heavy equipment leasing services in direct support of the Marine Air Ground Task Force Training Command (MAGTFTC), Range Management and Development Division's (RMDD) mission aboard Marine Corps Air Ground Combat Center (MCAGCC), Twentynine Palms, CA. The contractor will provided heavy equipment to qualified U.S. Government heavy equipment operators. Leased equipment will be operated at a maximum level of 8 hours per day. All heavy equipment shall be safe and fully operational. The contractor shall furnish all heavy equipment, maintenance services, repair services, and transportation to provide heavy equipment leasing services. The contractor shall be responsible for complying with all applicable federal, state and local regulations including, but not limited to, Environmental Protection Agency (EPA) and California Air Resources Board (CARB) regulations. During the period of performance, the equipment on the Equipment List below will be required on both an annual and as needed basis (i.e., in direct support of emergencies or additional mission requirements on-board the installation). All as needed heavy equipment may be required for periods ranging from 1-6 days, 7-29 days, or 30 days or more. Quotes shall be complete and be organized into the following parts: Volume I - Price Quote , Volume II - Technical Proposal and Volume III - Past Performance. Quotes shall include a Cover Sheet and, if applicable, Teaming Arrangement/Joint Venture Documentation. At a minimum, quotes must include the following to be eligible for award: 1. Cover Sheet with the following information: 1.1 Time specified in the solicitation for receipt of quotes: Tuesday, June 29, 2021 at 10:00am (PT). 1.2 Company name; 1.3 Company address and remit to address if different from mailing address; 1.4 Company telephone number; 1.5 Company e-mail address; 1.6 Company point of contact(s); 1.7 SAM registration expiration date; 1.8 CAGE code; 1.9 DUNS number; 1.10 Registration confirmation for NAICS code 532412; 1.11 Acknowledge Solicitation Amendments, if applicable; 1.12 Government Site visit is recommended see PWS for details. 2. Volume I: Price Quote and any discount terms with the following information: 2.1 Submit the Standard Form (SF) 1449, with blocks 12, 17a and b, and 30a through c completed with an original, authorized signature and the Contract Clauses section filled-in. 2.2 Quoters shall submit pricing on the CLINS/Schedule of the SF1499 solicitation. 2.2.1 Quoter must submit an hourly labor rate in CLIN Descriptions on CLINS 0016,1016 and 2016. 2.3 Submit a copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b)(2) for those representations and certifications that the Quoter shall complete electronically) and FAR 52.209-5. 2.4 If applicable, submit all pages of each solicitation amendment(s) (SF 30) with the original solicitation documents, signed by the same official authorized to sign the SF 1449. 2.5 Pricing shall be included by annotating the unit price under each CLIN respectively. The annotated unit price multiplied by the quantity shall equal the total amount for each CLIN and subCLIN. Quoted unit pricing shall be stated in no more than 2 decimal places. Any price quote containing unit pricing exceeding two (2) decimal places will be deemed an incomplete submission. *See attached consolidated CLIN Equipment List Pricing Tool in PWS - Quoters may use this as a calculation tool, but are not required to submit. This tool WILL NOT be a substitute for the REQUIRED pricing on the CLINS/Schedule of the SF1499 solicitation 3. Volume II: Technical Proposals shall include the following: (1) Technical Approach and (2) Quality Control Plan. Submit your technical proposal with the following information: 3.1 Part 1: Technical Approach: 3.1.1 Include a narrative on how Quoter plans to supply heavy equipment leasing services to Range Management and Development Division (RMDD), MCAGCC Twentynine Palms, CA., in accordance with (IAW) the objectives stated on the PWS. The Quoter must also provide a list of the proposed heavy equipment, with model specifications, to satisfy the Equipment Salient Description List, IAW the PWS. 3.2 Part 2: Quality Control Plan: 3.2.1 Must include a Quality Control Plan that includes a narrative of procedures the Quoter intends to use to ensure compliance with PWS paragraph 5 (Quality Assurance Surveillance). Must specify procedures that will be used to identify and prevent non-performance issues, and plan to correct such issues. 3.3.2 Must include a narrative of how quoter plans to ensure compliance with PWS paragraphs 3.1 and 3.2. 4. Volume III: Past Performance with the following information: 4.1 Submit a list of no more than three (3) recent and relevant contracts performed for Federal agencies or commercial customers as a prime contractor that demonstrates the ability to successfully perform the scope and breadth of the requirements as described in the PWS for this solicitation. Any past performance references in excess of the first three submitted will not be evaluated. 4.1.1 RECENT. The definition of recent as related to this solicitation includes performance within the last three years from the issue date of this solicitation; 4.1.2 RELEVANCE. Quoters shall identify what elements of each contract are deemed relevant to this solicitation. Definitions of relevancy are as follows: 4.1.2.1 RELEVANT. Present/past performance effort involved similar scope and magnitude of effort and complexities this solicitation requires; and 4.1.2.2 NOT RELEVANT. Present/past performance effort involved little or none of the scope and magnitude of effort and complexities this solicitation requires. 4.2 Submit the following information for each contract submitted for past performance evaluation: 4.2.1 Company/Division name; 4.2.2 Product/Service; 4.2.3 Contracting Agency/Customer; 4.2.4 Contract Number; 4.2.5 Contract Dollar Value; 4.2.6 Period of Performance; 4.2.7 Verified, up-to-date name, address, e-mail address, telephone number of the Government evaluator, contracting officer or customer POC responsible for procuring your services; 4.2.8 Comments regarding compliance with contract terms and conditions; and 4.2.9 Comments regarding any known performance deemed unacceptable by the customer or not in accordance with the contract terms and conditions, the resolution(s) implemented and results. Quoters are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement of the solicitation will result in a quote being excluded from consideration. Documents submitted in response to this solicitation must be fully responsive to and consistent with: (1) requirements of this solicitation; (2) Government standards and regulations; and (3) evaluation factors for award. All questions must be submitted by NLT Friday, June 25, 2021 at 11:00am (PT). All quotations are to be submitted electronically to contact@example.gov and contact@example.gov or may be hand delivered to: Mr. Pedro Tirado Ms. Tiffany Hurst MAGTFTC/MCAGCC Regional Contracting Office Building 1102, Door 21 Twentynine Palms, CA 92278 Due to data processing procedures within the DoD Network, please submit all electronic attachments in PDF Format only. FAXED QUOTATIONS WILL NOT BE ACCEPTED

More opportunities from Department Of Defense → Commanding Officer

Same awarding agency

NAICS: 333413
New
Federal
26-SIMACQ-D20-0005 D-Dept Control System Parts/Supplies BPA
Solicitation # N6339426Q4060
Solicitation N6339426Q4060 is a request for quotations from the Naval Surface Warfare Center Port Hueneme to establish a multi-award, five-year Blanket Purchase Agreement (BPA) for D-Department control system parts and supplies. This acquisition is a total small business set-aside under NAICS 333413, with a specific focus on women-owned small businesses. The scope includes the procurement of various electronic components, such as network media converters, power supplies, sensors, and printer hardware, all of which must adhere to the technical specifications detailed in the Salient Characteristics attachment. The BPA will utilize firm-fixed unit pricing, and individual call orders will be competed among BPA holders, with a maximum value of 900,000 dollars per order. Awards are based on a technically acceptable basis, requiring quoters to be authorized resellers and maintain an active CMMC Level 1 (Self) status in the Supplier Performance Risk System. While the BPA remains open for five years, the government evaluates quotes on a rolling basis to award Master BPAs as requirements arise. Successful contractors must comply with MIL-STD-130 for unique item identification and MIL-STD-129 for shipping labels. All invoicing and payment requests must be processed through Wide Area Workflow (WAWF). Interested parties must submit their quotes in PDF format, including a completed price list and part list, to the designated point of contact.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in almost 5 years
View Details
NAICS: 334519
New
Federal
Vertical Launching System (VLS) Launch Sequencer (LSEQ) Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ)
Solicitation # N6339426R0005
The Naval Surface Warfare Center, Port Hueneme Division is soliciting proposals for a Multiple Award Contract (MAC) under an Indefinite Delivery Indefinite Quantity (IDIQ) vehicle to procure the LSEQ MK 6 Mod 1 (NAVSEA p/n 8652144-19) and associated Lowest Replaceable Units (LRUs) for the MK 41 Vertical Launching System (VLS). The scope of work includes the fabrication, assembly, testing, and delivery of critical components such as Missile Electronics Boxes, Hazard Electronics Boxes, ethernet switch modules, power tray modules, relay module assemblies, and single-mode fiber optic cable assemblies. The contract also requires the performance of a Physical Configuration Audit and the incorporation of approved Diminishing Manufacturing Sources and Material Shortages changes into the system Technical Data Package. The total combined maximum value for all orders is 458,090,782 dollars, with a minimum award value of 1,000 dollars per awardee. The government intends to award no more than two contracts based on a best value tradeoff process, with technical capability and capacity weighted significantly more than price and past performance. Proposals must be submitted in two separate volumes via the Procurement Integrated Enterprise Environment, with a delivery schedule of 54 weeks from the date of award. The contract utilizes a firm fixed price model with stepladder pricing across a five-year ordering period. Quality standards are strictly governed by ASQ/ANSI/ISO 9001:2015 and MIL-STD-129R for marking and packaging. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification requirements and maintain strict operations security and information protection protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

6 days ago

DEADLINE

in 25 days
View Details
NAICS: 812332
New
Federal
27-SIMACQ-E80-0001 Shop Towels
Solicitation # N6339427Q4004
Solicitation N6339427Q4004 is a small business set-aside for the Naval Surface Warfare Center (NSWC) PHD to establish a weekly delivery service of glass towels for the production shop at Seal Beach, California. The contractor is required to provide an initial inventory of 500 lint-free cotton towels on the first day of service, followed by a recurring weekly exchange of 250 clean towels for 250 soiled towels, preferably every Wednesday. The towels must be 14 by 25 inches, 5 oz per square yard, with a plain weave. The contract is structured as a firm fixed price agreement consisting of a base year from December 1, 2026, through September 28, 2027, with multiple option years extending through September 2030. Award will be based on the lowest price technically acceptable (LPTA) method, evaluating total price, technical capability, and past performance. The contractor must utilize the Wide Area WorkFlow (WAWF) system for all electronic invoicing and payment requests. Performance is FOB Destination, with inspection and acceptance occurring at the Port Hueneme facility. Offerors must maintain active registration in the System for Award Management (SAM) and submit their quotes in PDF format to the primary point of contact by November 5, 2026. Compliance with various FAR and DFARS clauses is required, including Buy American regulations and specific cybersecurity reporting standards.
Industrial Launderers

POSTED

6 days ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS