This Government Contract opportunity from Department Of Agriculture was posted on April 8, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
HighAI Summary for 833-4F1 - 4 Drain Dip Detail: Technical drawing and specification detail for a 'Drain Dip' installation. Includes plan, profile, and section views, installation notes regarding elevation and skew, and reinforcement requirements based on subgrade and slope protection types.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for 833AF1 - 3 Sag Dip Detail: Technical drawing and specifications for a Sag Dip detail, including plan and profile views, excavation notes, elevation requirements, and material source information. It specifies subgrade treatment and slope protection pay items and reinforcement requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for 833AF1 - 5 Water Bar Detail: Technical specification and installation schematic for water bar construction, dated 12-29-2003. It outlines installation methods, including skew dip requirements, road grade limits, and excavation constraints.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for 834-1 Drainage Structure Maintenance Details: Technical detail sheet for drainage structure maintenance (culvert and catch basin cleaning) for the Mount Baker-Snoqualmie National Forest Road Maintenance 2008-2009 project. Includes instructions for removing blocking material and coordination with the COR regarding waste sites.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Blading Standards for Section B11 (Table L): Technical specification document detailing blading standards for one and two lane traveled ways, including minimum, desirable, and maximum width requirements for aggregate, cinder, and native aggregate surfaces, as well as drainage and edge treatment guidelines.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Cleaning of Ditch Relief Catch Basin and Transition (834F1-2): Technical drawing and specification document (834F1-2) detailing the typical sections of catch basins and transition areas, including requirements for materials removed under specification 834 and cleaning areas for ditch relief catch basins.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Closure 640-2 Drawing - Driggs: A technical drawing/diagram from the USDA Forest Service Pacific Northwest Region-6, dated May 9, 2007, detailing road closure specifications including the removal of rocks, logs, and debris.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Culvert Cleaning and Brushing Details (Drawing 834-4): Technical drawing and specifications (Revised 4/97) detailing the requirements for hand cleaning culvert catchbasins, inlets, outlets, and ditch areas. It specifies cleaning limits, brush cutting radii (2 meters), and debris removal requirements to ensure free water flow.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Ditch Maintenance - Typical Section of Ditch and Slide Material (834-3): Technical drawing/specification document (Revised 4/97) detailing the typical section of ditch and slide material for ditch maintenance, including slough cleaning requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Drawing 838-3: Object on Roadbed: Technical drawing 838-3 detailing requirements for the removal of objects on roadbeds, including instructions for cutting trees, removing rocks and debris over 4 inches in height, and maintaining minimum opening clearances on logs to ensure drainage.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Drawing 838-5: Treatment of Slumps and Roadbed Cracks: Technical drawing 838-5 providing specifications for the treatment of slumps and roadbed cracks, including minimum ramp widths, ditch placement for drainage, and crack sealing requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Hazard Removal Drawing 851-2: Technical drawing (DWR NO: 851-2) dated September 13, 2004, from the USDA Forest Service Pacific Northwest Region-6. It provides specific technical requirements for hazard removal on Maintenance Level 2 roads, including debris removal and tree repositioning to ensure a minimum 12-foot opening for high clearance vehicles.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Mount Baker – Snoqualmie National Forest Driveable Cross Ditch Detail Sheet: Technical detail sheet for the construction of driveable cross ditches for road maintenance (2008-2009) within the Mount Baker – Snoqualmie National Forest. The document provides perspective and profile views, excavation limits, design variable charts based on road grade, and specific construction notes regarding compaction, surfacing, and inspection requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Mt. Baker-Snoqualmie National Forest Drivable Cross Ditch Detail Sheet: Technical detail sheet for the construction of driveable cross ditches for the Mt. Baker-Snoqualmie National Forest Road Maintenance (2008-2009). The document provides perspective and profile views, excavation limits, aggregate surfacing requirements, and a design variable chart correlating road grade percentages to specific distance measurements and installation frequency per mile.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for SOL-10-0010 Road Maintenance - Skykomish Ranger District: A schedule of items for road maintenance in the Skykomish Ranger District, including estimated quantities and unit price fields for riprap placement, road closure devices, water trucks, excavators, and spot surfacing.
PDF
PDF, High priority: read this firstrfp
HighAI Summary for SOL-AG-05M6-S-10-0010 - Schedule of Items: A solicitation for an Indefinite Quantity contract for road maintenance services, including cleaning drainage structures, vegetation establishment, and sign maintenance. The document includes Section B - Schedule of Items with a bid table, a minimum guarantee of $60,000, and a maximum contract amount of $99,000. It specifies ordering procedures and a performance period ending June 30, 2011.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Special Project Specification 640-1 Road Closure Detail: Technical drawing and specification for a road closure detail (640-1), outlining the construction of earth mound and boulder barriers, including specific dimensions for burial depth, mound height, and placement requirements relative to the centerline.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Special Project Specification 834F1 - 5 Drainage Ditch Maintenance Detail: A technical specification document dated 2/23/2006 detailing drainage ditch maintenance, including specific measurements for depth and slope ratios for traveled ways and fillslopes.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Typical Rolling Dip Drawing 838-1: Technical drawing 838-1 providing design specifications for a typical rolling dip, including plan views, road profiles, and grade line requirements for outsloped or insloped designs.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for USDA Forest Service Region 8 - Culvert Replacement Details 833F1-1: Technical drawing and specifications for culvert replacement details (833F1-1) for the USDA Forest Service Region 8, Mount Baker-Snoqualmie National Forest Road Maintenance 2008. Includes installation details for Type 1, 2, and 3 culverts, section views, and anchor installation architecture.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for US Forest Service Hazard Removal Drawing 851-1: Technical drawing and specification document from the USDA Forest Service Pacific Northwest Region-6, dated September 13, 2004. It provides detailed requirements for hazard removal and clear zone maintenance for typical maintenance level 3-5 roads, including instructions for rock/debris removal and tree repositioning relative to the road centerline.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for US Forest Service Pavement Patching Typical (DWG 814-1): Technical drawing and specification document from the USDA Forest Service Pacific Northwest Region 6, dated September 26, 2009. It provides typical maintenance standards for pavement repair and patching on Level 3-5 roads, including requirements for saw cutting, tacking edges, and compaction with a steel drum vibratory roller.
PDF
PDF, Low priorityother
LowAI Summary for 838-4F1.pdf: The document contains no procurement-related content and appears to be a placeholder or an image description stating that information is factually accurate.
AI Contract Breakdown
Uniform Contract Format
Contract not broken down yet
CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.
Timeline
PhaseAwarded
Posted
Presolicitation
Type Changed
Presolicitation → Solicitation
Awarded
Contract was awarded
Submission Closed
Find active opportunities like this
Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.
Organization & Contact Information
Show more
AgencyDepartment Of Agriculture → Mt Baker Snoqualmie National Forest
The intent of this performance based service contract is to provide for road maintenance of Forest Service roads on the Mt. Baker-Snoqualmie National Forest (Skykomish Ranger District). The resulting contract will be a performance based, Indefinite Quantity Indefinite Delivery contract with a minimum guarantee of $60,000.00 and a maximum not to exceed $99,000.00. The Contractor shall furnish all labor, materials, equipment, tools, transportation, and supplies, and perform all work required to maintain the facilities according with drawings and specifications of the contract. All road are located on the Skykomish Ranger District. District maps showing the road systems are available for viewing or purchasing at the Skykomish Ranger District Office. Roads will be identified on work orders for the Contractor. The estimated Issue date for the Solicitation is February 16, 2010. The estimated start work date is June 1, 2010 with a contract duration of 395 days. Technical contact for this project is Ron Hausinger at +1 (555) 000-0000 ext 257 or email contact@example.gov.