Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roadwork-CONSTRUCTION OF SURFACING STRUCTURE on HWY 4; TOTAL DISTANCE OF 21.70 KM. CS: 4-06

Closed
SK-HWY-H26032International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237310
New
SLED
Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will comprehensively reconfigure the entry and exit drives along 19th Ave W, demolish the remaining slab of the Downie Building (C-14), and transform the footprint into a mix of new parking spaces and green areas designed as pollinator habitats, with potential integration of a stormwater treatment facility. Existing pavement in deteriorated condition will be milled and overlaid, while stormwater infrastructure will be entirely replaced and expanded to divert runoff from combined sewer lines to dedicated storm lines, including water quality treatment on qualifying surfaces. A new irrigation system will support the landscaped areas, and landscaping will also be installed in the rebuilt median within the entry drive. Electric vehicle charging stations will be incorporated into the new parking zone. The project will enhance multimodal access by adding a protected two-way bike lane connecting the terminal to the West Wall bike path, improving pedestrian pathways to the intersection of 21st Ave W and W Emerson Pl, and linking directly to the King County Metro bus stop. Lighting will be upgraded throughout the new parking area and pedestrian corridors, and wayfinding signage will be installed to guide cyclists and pedestrians. All improvements are intended to modernize the terminal’s entry experience, support sustainable transportation, and reduce environmental impact through better stormwater management and habitat creation. The project is being managed by the Port of Seattle through its Waterfront Project Management team, with primary contact information publicly available for inquiries and coordination.
Waterfront Project Management

POSTED

about 7 hours ago

DEADLINE

N/A
NAICS: 237310
New
SLED
Asphalt Paving & Striping Portwide Unit Price 2026The contract encompasses a wide range of pavement and infrastructure maintenance activities to be performed across multiple sites within the Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, removal and disposal of grinding spoils, stripping and removal of existing pavement markings, surface preparation for new striping, stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, lifting and leveling of concrete sidewalks, and upgrades to road drainage systems, which may require obtaining permits. All tasks are to be executed under a unit price structure, with pricing based on predefined line items for each service. This solicitation, titled Asphalt Paving & Striping Portwide Unit Price 2026, is a forecast under NAICS code 237310 and is managed by the Port of Seattle through its Port Construction Services division. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable via official Port of Seattle contact information. The contract does not specify a solicitation number or set-aside type, and performance locations span the Port’s expansive operational footprint without a single designated address. All work must comply with Port standards and procedures, and contractors are expected to coordinate logistics, permitting, and site-specific requirements across distributed locations.
Port Construction Services

POSTED

about 7 hours ago

DEADLINE

N/A
NAICS: 237310
New
International
2026 Territorial Drive Widening - Phase 1 & 2The 2026 Territorial Drive Widening Phase 1 & 2 Project aims to enhance traffic operations, safety, and capacity along a major corridor in the City of North Battleford, Saskatchewan. Phase 1 focuses on widening the intersection of Territorial Drive and the adjacent Service Road to increase turning radii and pavement width, improving maneuverability for all vehicles, particularly large commercial trucks, transit buses, and emergency vehicles, while also including a pavement overlay on the southbound lanes to extend their service life. Phase 2 extends the widening efforts northbound from the Carlton Trail intersection to the Airport Road intersection, adding lane width to improve traffic flow and reduce congestion on this heavily used stretch of roadway. The project is being executed in two distinct phases to ensure systematic improvements across the corridor while minimizing long-term disruption. All qualified contractors are invited to submit bids to perform the work as the Prime Contractor, with proposals due to the City Clerk's Department by August 6, 2026, either by mail or email. Questions regarding the bid documents must be submitted by August 4, 2026. The solicitation is identified by number 20260724 and was posted on July 25, 2026, with the formal closing time set for 8:30 PM on the due date. Bids must be directed to the City Clerk’s Department at 1291-101st Street, PO Box 460, North Battleford, SK S9A 2Y6, or emailed to tenders@cityofnb.ca, with the City Clerk’s Department serving as the primary point of contact for all inquiries.
City of North Battleford

POSTED

about 23 hours ago

DEADLINE

in 12 days
NAICS: 237310
New
SLED
2026 Roadway Improvement Program, Contract No. 11100-012The contract pertains to the 2026 Roadway Improvement Program, Contract No. 11100-012, under the Borough of Newtown in Bucks County, Pennsylvania, and involves comprehensive roadway improvements including full-width mill and overlay of 1,095 square yards and 105 tons of pavement, along with 745 square yards of pavement repair. Additional scope includes replacing two handicap ramps with 60 linear feet of curb and 300 square feet of sidewalk, repairing 30 linear feet of property owner curb, performing 170 square yards of additional pavement repair, placing 25 tons of leveling and scratch course material, replacing two traffic signs, and reinstalling all pavement markings. All work is subject to the Public Works Employment Verification Act and the Pennsylvania Prevailing Wage Act, requiring compliance with wage standards and submission of a completed Employment Verification Form as a condition of bid submission. Bids must include a certified check or bid bond equal to 10% of the total bid amount, along with a fully completed Bid Form, Bidder’s Qualification Statement, executed Anti-Collusion Affidavit, and signed acknowledgement of Borough Ordinance No. 788. Failure to submit any of these documents will result in bid disqualification. The contract will be awarded to the lowest responsible bidder, though the Borough retains the right to reject any or all bids and waive minor irregularities. Upon award, a Performance Bond equal to 100% of the contract price is mandatory. Proposals are due by August 17, 2026, at 2:00 PM, and the project falls under the jurisdiction of the Pennsylvania Department of Transportation’s MS-944 guidelines as outlined in the Contract Documents.
Bucks County

POSTED

1 day ago

DEADLINE

in 23 days
NAICS: 237310
New
SLED
2026 Stormwater BumpoutsSealed bids for Contract No. 2026-02, 2026 Stormwater Bumpouts, will be accepted electronically through PennBID until 11:00 AM on August 18, 2026, for work within the public right-of-way in Narberth Borough, Pennsylvania. The project includes the installation of two stormwater bumpouts, replacement of damaged curb and sidewalk sections, and construction of a new curb ramp, all in accordance with contracted drawings and specifications that reference ASTM, AASHTO, PennDOT Publication 408, and Federal Standards. Bids must be accompanied by a certified check or bid bond equal to at least 10% of the bid amount, and the successful bidder must furnish a performance bond and labor and materials bond each equal to 100% of the contract value, plus a maintenance bond of 25% of the first $200,000 and 10% of any amount exceeding that, with all bonds issued by companies licensed to do business in Pennsylvania. The work must be completed within 50 consecutive calendar days from the issuance of a written notice to proceed, and liquidated damages of $500 per calendar day apply for delays beyond the scheduled completion. All labor must comply with prevailing wage rates as established by the Pennsylvania Department of Labor and Industry, and bidders must submit verified certifications including an anti-collusion affidavit, certification of non-debarment, public works employment verification, and vendor classification forms. Materials must originate from the U.S. and bear permanent markings indicating identifiable steel, with each shipment requiring a Certificate of Compliance (Form CS-4171), unique lot number, and approved material description tied to PennDOT Bulletins. Inspections occur on-site, and acceptance is contingent upon compliance with all contract documents and standards; the Engineer holds full authority to reject nonconforming work even after prior approval. The Owner reserves the right to waive irregularities or reject any bid. No formal FAR clauses are included; instead, the contract relies on numeric local clauses covering provisions required by law, protection of work and property, changes in the work, and use of explosives. Subcontracting or assignment of the contract requires prior written approval, and a competent superintendent must be present on-site continuously during construction. All submissions must be made exclusively through the PennBID portal, with no physical, faxed, or emailed bids accepted.
Montgomery County

POSTED

1 day ago

DEADLINE

in 24 days

AI Contract Overview

Show more

The contract entails the construction of a surfacing structure along Highway No. 4, covering a 21.70 km stretch from 0.30 km south of the Saskatchewan Landing Provincial Park Access Road to 60 meters north of Railway Avenue in the Town of Kyle. Bidders must submit all inquiries related to the bid package at least three business days before the closing deadline of June 11, 2026, to the Ministry of SaskBuilds and Procurement via RFXquestions@gov.sk.ca. A deposit equal to five percent of the total bid amount is required with each submission. The project involves the use of approximately 235,400 square meters of reclaimed asphalt concrete in place from stockpiles and 63,300 tonnes of new asphalt concrete in place, with a mandated completion date of November 30, 2026. The solicitation is issued under reference number SK-HWY-H26032 with a NAICS code of 237310 and is managed by SaskBuilds and Procurement on behalf of the Government of Canada. Successful bidders may request a debriefing within 30 days of award notification to receive feedback aimed at improving future bid submissions, through email to constructionsbp@gov.sk.ca.

General Info

Construction of 21.7 km highway surfacing on Hwy 4, Saskatchewan, completing by Nov 2026.

Agency

Government of Canada → SaskBuilds and Procurement

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Saskatchewan, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → SaskBuilds and Procurement
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → SaskBuilds and Procurement
Office AddressN/A
Contacts
Construction SBPContracting Authority

Full Description

Show more
CONSTRUCTION OF A SURFACING STRUCTURE on Highway No. 4 from 0.30 km south of the Saskatchewan Landing Provincial Park Access Road to 60 m north of Railway Avenue in The Town of Kyle; for a TOTAL DISTANCE OF 21.70 km. Bidders shall submit all inquiries pertaining to the Bid Package documents a minimum of 3 business days prior to close of bidding directed to: Ministry of SaskBuilds and Procurement RFXquestions@gov.sk.ca Bidders may request a debriefing session from Ministry of SaskBuilds and Procurement by emailing constructionsbp@gov.sk.ca within 30 days after the award notification date. The intention of the debriefing is to aid the Bidder by identifying areas of improvement that may be applied to subsequent procurement opportunities. Additional InformationEstimated Quantities: Reclaimed Asphalt Concrete In Place In The Stockpile: 235 400 m2 Asphalt Concrete In Place (EPS): 63 300 t Completion Date: November 30, 2026 Deposit with each Tender - 5% of total bid. Deputy Minister of Highways

More opportunities from Government of Canada → SaskBuilds and Procurement

Same awarding agency

NAICS: 336411
International
Manufacture and Supply of up to Four New Multi-Engine Turbo Prop Pressurized AircraftThe Government of Saskatchewan, through SaskBuilds and Procurement, is seeking proposals to manufacture and supply up to four new multi-engine turboprop pressurized aircraft to replace its current fleet of four Beechcraft King Air B200s, which are equipped with medical interiors for air ambulance services across the province. This initiative is part of a five-year fleet replacement plan aimed at enhancing safety and dispatch reliability for patient and medical crew transport. The solicitation, identified as SK-9123, invites qualified manufacturers to submit detailed proposals by the deadline of August 7, 2026, with an optional virtual proponent meeting scheduled for June 22, 2026, to provide insight into procurement requirements and deliverables. Interested parties must register their attendance by June 18, 2026, by emailing rfxquestions@gov.sk.ca with attendee names and any preliminary questions. The RFP is classified under NAICS code 336411 for aircraft manufacturing and is open to all eligible proponents without specific set-asides. While the agency is listed as SaskBuilds and Procurement under the Government of Saskatchewan, the tender is hosted on the federal platform Canadabuys, and the point of contact is Ryan Gianoli, Contracting Authority. Proposals must address technical specifications for aircraft capable of operating in Saskatchewan’s diverse environmental conditions, including medical interior configurations, maintenance support, and compliance with regulatory standards. Any updates or changes to the procurement process will be communicated through SaskTenders via official addenda, and attendance at the proponent meeting is strongly encouraged to ensure a complete understanding of requirements before submission.
Aircraft Manufacturing

POSTED

about 2 months ago

DEADLINE

in 13 days
View Details
NAICS: 561210
International
Garment and Facility Support AccessoriesThe Government of Saskatchewan, through SaskBuilds and Procurement, is seeking qualified suppliers to provide a comprehensive service program for industrial workwear, personal protective equipment, and facility support accessories under solicitation number SK-112-2025_Cont. The contract involves the supply, laundering, repair, maintenance, and replacement of garments and related accessories essential for daily government operations. This is an ongoing pre-qualification process, posted continuously on SaskTenders with a response deadline of May 30, 2031, and evaluations conducted quarterly or as determined by the government. Respondents must meet established qualifications and requirements, and those not selected are barred from reapplying for three months after their submission. The service is to be performed across Saskatchewan, and all responses are evaluated under consistent criteria throughout the term. The solicitation, classified under NAICS code 561210, is managed by the Contracting Authority Jaspal Singh, and inquiries can be directed to rfxquestions@gov.sk.ca. While the posting references the Government of Canada as the agency name, the performance location and contracting authority are clearly within the Government of Saskatchewan. The onboarding window for new respondents remains open until six months before the contract’s expiration, ensuring a steady pipeline of qualified vendors. Participation in this process requires adherence to the standardized terms and evaluation methods outlined in the initial RFSQ document, with no revisions allowed for subsequent submissions. Successful respondents will be integrated into a long-term operational support framework critical to workplace safety and facility functionality across provincial operations.
Facilities Support Services

POSTED

2 months ago

DEADLINE

in almost 5 years
View Details