Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Rock Excavation Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238910
New
SLED
Selective Demolition and Debris Removal
Airfield Maintenance - 105

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 238910
New
SLED
Rock Drilling and Subsurface Obstruction Removal
Clarke County

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 238910
New
SLED
South Sacramento Sidewalk Gap Closure Tree Removal Project
Solicitation # 41021
The South Sacramento Sidewalk Gap Closure Tree Removal Project, solicitation 41021, is a CUPCCAA project managed by the County of Sacramento Department of Transportation. The contractor is required to provide all labor, materials, and equipment to remove designated trees along Cottonwood Lane and Stevenson Avenue to support new sidewalk construction and infrastructure improvements. The scope includes cutting limbs and trunks to a height of two feet above existing grade, with no stump grinding required. All debris must be legally disposed of, and the contractor is responsible for traffic control, protecting non-designated trees, and restoring any damaged utilities or improvements. To avoid nesting season, tree removal must be completed by January 31st, or otherwise approved by the engineer and surveyed by the Agency if performed after February 1st. The estimated construction cost is 110,000 dollars, with the contract award based on the lowest responsive and responsible base bid. The period of performance is twenty working days, and the project is subject to prevailing wage requirements and specific hourly restrictions near Florin High School. Bidders must provide a bid bond or certified check for at least 10 percent of the bid amount, and the successful awardee must execute performance and payment bonds for 100 percent of the contract price. Evaluation factors include regulatory compliance with California Air Resources Board Advanced Clean Fleets regulations. Bids must be submitted electronically via the Sacramento County Electronic Bidding Portal by October 22, 2026.
County of Sacramento, Community Services Agency, Department of Transportation

POSTED

about 17 hours ago

DEADLINE

in 14 days
NAICS: 238910
New
SLED
DMS Site Management & Restoration
City of Santa Fe

POSTED

about 17 hours ago

DEADLINE

in 17 days
NAICS: 238910
New
SLED
Emergency Roadway Clearance (PUSH)
City of Santa Fe

POSTED

about 17 hours ago

DEADLINE

in 17 days
NAICS: 238910
New
International
External Works & Groundworks
Bracknell Forest Borough Council

POSTED

about 17 hours ago

DEADLINE

in about 2 months
NAICS: 238910
New
SLED
Highway Drainage and Erosion Control
Texas Department of Transportation

POSTED

about 17 hours ago

DEADLINE

in 25 days
NAICS: 238910
New
SLED
Site Demolition and Interior Remodeling
Maintenance & Facilities

POSTED

about 17 hours ago

DEADLINE

in 28 days
NAICS: 238910
New
SLED
Riprap and Baffle Installation
Abandoned Mine Lands

POSTED

about 18 hours ago

DEADLINE

in 18 days
NAICS: 238910
New
SLED
Site Repair and Grading Services
Abandoned Mine Lands

POSTED

about 18 hours ago

DEADLINE

in 18 days
NAICS: 238910
New
SLED
4400 - Fall Maintenance Package
Solicitation # SRC0000037006
Solicitation SRC0000037006 is an Invitation to Bid for the 4400 Fall Maintenance Package issued by the Alabama Abandoned Mine Lands program. This combination lump sum and unit price contract involves site repairs and vegetation management across multiple Alabama locations, including Whitemore Road, Byler Road, Glen Marv, Coaldale, Blue Creek Road Gobb Fire, Weldon, and New Life Church. The scope of work includes repairing silt fences, installing wattles and erosion control blankets, grading washes, constructing water bars, repairing highwall slips, reconstructing terraces, and performing revegetation and topdressing. Bids must not exceed 365,000.00 dollars, and the award will be granted on an all-or-none basis to the lowest qualified and responsible bidder. Prospective bidders must attend a mandatory pre-bid conference on October 16, 2026, at 10:00 AM Central Time at the AML Field Office in Vestavia Hills, Alabama. All questions must be submitted via the solicitation discussion tab by October 21, 2026, at 5:00 PM Central Time, with a final response deadline of October 26, 2026. Mandatory requirements for bid acceptance include active SAM.gov registration with a valid Unique Entity Identifier, proof of general liability and workers compensation insurance, and an Alabama General Contractor's License for bids exceeding 100,000.00 dollars. The successful contractor must provide performance and payment bonds equal to 100 percent of the contract amount and comply with the Davis-Bacon Act, Build America Buy America, and OSHA safety regulations.
Abandoned Mine Lands

POSTED

about 18 hours ago

DEADLINE

in 18 days
NAICS: 238910
New
SLED
Earthwork and Underground Utility Support
NYS OGS Design & Construction - Construction Contractors

POSTED

about 18 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

This subcontract for Rock Excavation Services involves the removal of unyielding rock material encountered during utility trenching for prime contractors at USACE Air Force facility projects. The work is performed in Rock Island, Illinois, and requires the use of rock hammers, blasting equipment, or heavy-duty rippers to deliver excavated trenches cleared to specified depths. All operations must be conducted in strict accordance with EM 385-1-1 safety standards. The opportunity is managed by the Department of Defense under agency W6QK Acc-Ri and falls under NAICS code 238910. It was posted on September 2, 2026, with a response deadline of September 15, 2026, at 3:00 PM.

General Info

Rock excavation services for USACE Air Force projects in Rock Island, Illinois.

Agency

Department Of Defense → W6QK Acc-Ri

NAICS

238910 - Site Preparation Contractors

Place of Performance

Rock Island, IL, 61299, USA

Set-Aside

NONE

Documents

This scope was carved out of W519TC-26-R-A072.

The full solicitation package (15 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Install Utilities - RV Campground Site - Rock Island Arsenal (Amendment 0003)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Ri
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs removal of unyielding rock material encountered during utility trenching for prime contractors on USACE Air Force facility projects. Utilizes rock hammers, blasting equipment, or heavy-duty rippers in accordance with EM 385-1-1 safety standards. Delivers excavated trenches cleared of rock to specified depths.

More opportunities from Department Of Defense → W6QK Acc-Ri

Same awarding agency

NAICS: 332992
New
Federal
M82 Setback Pin
Solicitation # W519TC-27-Q-A003
Army Contracting Command - Rock Island issued solicitation W519TC-27-QA003 for the procurement of M82 Setback Pins to support the Pine Bluff Arsenal. This requirement is a 100 percent Small Business Set-Aside under NAICS code 332992 for Small Arms Ammunition Manufacturing, with a size standard of 1,300 employees. The government intends to award a single Firm-Fixed Price contract consisting of a Base Year and one Option Year to the responsive, responsible, lowest priced offeror. Evaluation will be based on the Total Evaluated Price, which combines the fixed Base Period price and a weighted price for the Option Year quantity ranges. The scope of work includes the production of 46,000 setback pins for the base period and one lot of ten pins for First Article Testing. All supplies must adhere to Drawing 13-19-166-2 Revision F and Detail Specification EA-G-1723C. Key deliverables include Certified Material Reports and a Certificate of Conformance with each shipment. Delivery is FOB Destination to the Pine Bluff Arsenal in Arkansas. Payments will be processed via DFAS through Wide Area Workflow using an Invoice 2in1 and a DD250. Quotes must be submitted via email to the designated contract specialists by 1:00 PM CDT on October 21, 2026, and must remain valid for 60 days.
Small Arms Ammunition Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423610
New
Federal
Electronic Security Systems Component SupplierThis subcontract opportunity, titled Electronic Security Systems Component Supplier, is a total small business set-aside issued by the Department of Defense under agency W6QK Acc-Ri. The contract focuses on the procurement of specialized hardware and components for prime contractors working on Army National Guard facility projects located at NWS Crane CAAA. Required deliverables include DAQ Electronics components such as PMC, RPM, and RSM, as well as Bosch cameras, VMS server hardware, Tilt-A-Way gate parts, and security-grade wiring and conduit. To be eligible, vendors must hold authorized distributor or vendor status for the named original equipment manufacturers. All specified hardware must be delivered directly to NWS Crane CAAA. The solicitation was posted on October 7, 2026, with a response deadline of November 6, 2026. The project falls under NAICS code 423610 and is performed in zip code 47522.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 238990
New
Federal
Automated Gate and Access Control Hardware TechnicianThis subcontract opportunity is for an Automated Gate and Access Control Hardware Technician to support prime contractors on Army National Guard facility projects at NWS Crane CAAA. The selected provider will be responsible for the maintenance, repair, and testing of automated entry gate systems, specifically focusing on Tilt-A-Way mechanical components and integrated AI phone systems to maintain constant operational readiness. The primary objective is to deliver a fully functional automated gate and communication system. This is a total Small Business Set Aside under NAICS code 238990 for the Department of Defense. Due to the nature of the installation, personnel must possess a general security clearance to gain access to the site. The response deadline for this requirement is November 6, 2026.
All Other Specialty Trade Contractors

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 238210
New
Federal
Video Management System (VMS) and CCTV TechnicianThis small business set-aside subcontract involves the installation, repair, and maintenance of Closed Circuit Television systems for prime contractors at Army National Guard facilities located at NWS Crane CAAA. The scope of work includes the installation of Bosch VMS cameras, servers, and network devices, as well as the maintenance of surge suppression and UPS systems and the testing of fiber optics to ensure a fully operational video monitoring network. The project is managed under the Department of Defense through agency W6QK Acc-Ri and falls under NAICS code 238210. Due to the nature of the network access required, personnel must maintain strict cybersecurity compliance in accordance with DoD 8570.01-M and AR 25-2 standards. The response deadline for this opportunity is November 6, 2026.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 561621
New
Federal
Intrusion Detection and Access Control Systems (IDS/ACS) SpecialistThis subcontract opportunity is for an Intrusion Detection and Access Control Systems Specialist to support prime contractors on Army National Guard facility projects at NWS Crane CAAA. The scope of work involves the administration, maintenance, repair, testing, and installation of ICIDS-V and Access Control Systems. Key technical responsibilities include diagnosing and replacing components across 240 zones, programming Callisto View and StarWatch/SMS software, and constructing MIMIC graphics to deliver fully operational systems and CAD as-built drawings. The project is issued by the Department of Defense under agency W6QK Acc-Ri and is designated as a Total Small Business Set Aside. To be eligible, contractors must hold DAQ Value Added Retailer status and DAQ Electronics certification. The solicitation was posted on October 7, 2026, with a response deadline of November 6, 2026. Performance will take place in zip code 47522 under NAICS code 561621.
Security Systems Services (except Locksmiths)

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 484220
New
Federal
Hazardous/Industrial Chemical Packaging and FreightThis small business set-aside subcontract involves providing specialized hazardous and industrial chemical packaging and freight services for prime contractors supporting Army Contracting Command - Rock Island projects. The scope of work includes packaging chemical powder into 50 lb bags, fiber drums, or 55-gallon polyurethane lined drums, with a requirement to palletize 40 bags per pallet. The contractor is responsible for FOB Destination transport of these materials to the Pine Bluff Arsenal in Arkansas. Strict adherence to MIL-STD-129 and HAZMAT shipping standards is required for all operations. Every delivery must be accompanied by the appropriate Safety Data Sheets and Certificates of Analysis to ensure compliance and safety. The opportunity is categorized under NAICS code 484220 and is managed through the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 325180
New
Federal
Production of Non-Micronized Pentaerythritol (PE)This small business set-aside subcontract involves the production of Non-Micronized Pentaerythritol for prime contractors supporting Army Contracting Command - Rock Island projects. The scope of work requires chemical synthesis and grinding using industrial reactors and precision sieving equipment to ensure that 95 percent of the material is smaller than 1000 microns or passes a No. 18 sieve. All production must strictly adhere to Drawing 36-1-317, Rev F, as well as MIL-STD-130 and MIL-STD-129 standards. The contract specifies the delivery of a 2 lb First Article Test sample followed by a total volume of up to 83,600 lbs of the chemical compound. Performance will take place in Pine Bluff, Arkansas, under NAICS code 325180. The solicitation was posted on October 7, 2026, with a response deadline of November 4, 2026.
Other Basic Inorganic Chemical Manufacturing

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 321999
New
Federal
Industrial Wooden Crate SupplierThis subcontract opportunity is for an Industrial Wooden Crate Supplier to support prime contractors on Army Contracting Command - Rock Island projects. The selected provider will fabricate and supply custom protective wooden boxes using industrial grade lumber and plywood, specifically engineered to prevent damage, bending, or surface contamination of precision-finished steel bars during transit. Responsibilities include the construction of these crates and their delivery to the designated processor or final shipment site. Managed by the Department of Defense under agency W6QK Acc-Ri, this project is designated as a total Small Business Set Aside. The work will be performed in Rock Island, Illinois, under NAICS code 321999. Interested parties must submit their responses by the deadline of October 19, 2026.
All Other Miscellaneous Wood Product Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
Federal
Turned Ground and Polished (TGP) 4130 Steel Bar SupplierThis small business set-aside subcontract through the Department of Defense involves the supply and processing of high-precision 4130 alloy steel bars for prime contractors supporting Army Contracting Command - Rock Island projects. The scope of work requires furnishing 12-foot bars that are turned, ground, and polished to a specific diameter tolerance of .375" +.000" / -.002" and thru-hardened to 33-38 HRC in accordance with SAE AMS-S-6758. To ensure quality and compliance, the supplier must hold AS9100 mill certification along with either AS9120 or ISO 9001 supplier certification. All materials must be delivered in protective wooden boxes and accompanied by a Certificate of Conformance. The performance of this contract is centered in Rock Island, with a response deadline set for October 19, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
Federal
Self-Lubricating Bearing Material Sheets (PTFE/Pb)This small business set-aside subcontract through the Department of Defense involves the manufacture and supply of self-lubricating bearing material sheets for prime contractors working on Army Contracting Command - Rock Island Arsenal projects. The required materials must feature a steel backing, a porous copper-tin bronze inner structure, and a PTFE/Pb bearing surface, adhering strictly to Drawing 1110700278 and ASME Y14.1-2007/Y14.5-2009 standards. A critical technical specification is a minimum compressive strength of 44,000 PSI. The scope of work requires the delivery of 424 linear feet of sheets measuring 5 by 96 inches. All shipments must be accompanied by a Certificate of Conformance and certified test results to ensure quality and compliance. The project is categorized under NAICS code 332710 and is performed in Rock Island, with a response deadline of October 20, 2026.
Machine Shops

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 561621
New
Federal
Electronic Security Systems
Solicitation # W519TC-27-Q-SEC1
The Army Contracting Command - Rock Island issued solicitation W519TC-27-Q-SEC1 for a 100 percent Small Business Set-Aside contract under NAICS 561621. The requirement is for comprehensive on-site maintenance, repair, and technical support for mission critical Electronic Security Systems at Crane Army Ammunition Activity. The scope of work includes the administration and 24/7 operational maintenance of Intrusion Detection Systems and Access Control Systems, specifically ICIDS version V / SMS, as well as Bosch Video Management CCTV systems and Tilt-A-Way automated gate systems. Services encompass preventative maintenance, software and firmware updates, emergency technical support, and the installation of new components. The contract is a single Firm Fixed Price award with a period of performance consisting of one base year and four option years. Award will be based on Best Value, where non-price factors are significantly more important than price. Evaluation factors include past performance, requiring three government projects between 100,000 and 1,000,000 dollars, and a mandatory site visit on October 19, 2026. Technical requirements include a minimum of three years of ICIDS IV/SMS experience and two years of SMS software front end configuration experience. Additionally, the prime contractor or its subcontractors must be a DAQ listed value added retailer. Offerors must be registered in the System for Award Management and submit their proposals by November 6, 2026. Compliance with NIST 800-171, DFARS 252.204-7012, and various Army security regulations is required.
Security Systems Services (except Locksmiths)

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332991
New
Federal
M7A1 Bearing Material
Solicitation # W519TC27QA012
Army Contracting Command - Rock Island Arsenal issued solicitation W519TC27QA012 for the procurement of M7A1 Bearing Material. This is a 100 percent total small business set-aside resulting in a firm fixed price contract for commercial products and services. The requirement consists of bearing material sheets measuring 5 inches in usable width by 96 inches, with a thickness of .0585 to .0605 inches, a compressive strength of 44,000 PSI, and a temperature range of -328 to 536 degrees Fahrenheit. The total quantity requested across three line items is 424 feet, with a delivery deadline of December 17, 2026, to the Rock Island Arsenal Joint Manufacturing and Technology Center in Illinois. Award will be granted to the lowest price, responsive, and responsible contractor who conforms to the specifications in Drawing 1110700278 and the associated purchase description. Strict delivery requirements are in place, including transport via flatbed truck, secure banding to pallets, and a maximum bundle weight of 5,000 lbs. Crucially, a Certificate of Conformance and certified test results must accompany the delivery to avoid immediate rejection. Payments will be processed by the Defense Finance and Accounting Service via Wide Area Workflow. Quotes are due by October 20, 2026, and must be submitted to the contract specialist.
Ball and Roller Bearing Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS