Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Roller Bearing_End_Item_J85_NSN_3110006185880OK_PN_327B430P1

Active
FD20302700167Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of roller bearings with part number 327B430P1 and NSN 3110-00-618-5880, intended for use on the J85 platform. This is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The government seeks information from all potential vendors, including small businesses, disadvantaged businesses, service-disabled veteran-owned firms, HUBZone businesses, and women-owned small businesses, to determine if the requirement can be competed or set aside for small businesses. The estimated need is for 177 units, and potential suppliers must demonstrate capability to handle full manufacturing, inspection, testing, packaging, logistics planning, supply chain management, and address diminishing manufacturing sources and material shortages, including any associated nonrecurring engineering costs. Responses are due by August 10, 2026, and must be submitted through the designated workflow email address. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the place of performance is Tinker AFB, Oklahoma. The Department of the Air Force, under the Air Force Sustainment Center, is leveraging this effort to evaluate the industrial base and refine its acquisition strategy for future sourcing. No funds are currently available for this market research phase, and submissions will be used solely to inform future procurement decisions. Participation requires selecting the “Add Me to Interested Vendors” button on the posting.

General Info

U.S. Air Force seeks qualified vendors to manufacture 177 roller bearings for J85 platform via market research, no award expected.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(1)

MSS_3110006185880OK_PR+FD20302700167.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Organization / Agency
Department Of Defense → Ok DLA Aviation At Oklahoma City
View Agency Profile
Office AddressTINKER AFB, OK, 73145-3070, USA
Contacts
SCMSRequirements
contact@example.gov

Full Description

Show more

Spares Procurement of: Roller Bearing


Platform: J85


NSN: 3110-00-618-5880 OK
P/N: 327B430P1


Notice ID (PR#): FD20302700167


AMC/AMSC: 3B


Department/Ind. Agency: DEPT OF DEFENSE
Sub-tier: DEPT OF THE AIR FORCE
Major Command: AFMC
Sub Command: AIR FORCE SUSTAINMENT CENTER
Office: 421st SCMS


GENERAL INFORMATION


• Contract Opportunity Type: Sources Sought (Original)
• All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA


Classification


• Federal Stock Class (manufacture): 3110
• NAICS Code: 336412


The proposed North American Industry Classification Systems (NAICS) Code has a corresponding Size Standard of 1,500 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hubzone Businesses, and Women-Owned Small Businesses.


• Place of Performance: Tinker AFB, OK 73145 USA


CONTACT INFORMATION


Organization: 421st SCMS
Workflow Email: 421scms.requirements.workflow@us.af.mil
SEND RESPONSES HERE


PURPOSE/DESCRIPTION


INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT.


THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.


This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential Spares Procurement sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited.


The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc.


The 421st SCMS Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the Spares Procurement of the NSN(s) listed below.


REQUIREMENTS


Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below:


Part Number: 327B430P1
NSN: 3110-00-618-5880 OK
Estimated Spares Requirement: 177ea


Please submit responses by: 8/10/26

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
RING, TURBINE STATOR
Solicitation # SPE4A1-26-Q-0112
The contract pertains to the procurement of 87 units of a turbine stator ring identified by NSN 2840-01-487-5388 and part number 5078T15G01 from General Electric Company, issued under solicitation SPE4A1-26-Q-0112 with a firm delivery deadline of 240 days after award. All items must comply with DLA’s packaging requirements labeled RP001 and be packed per MIL-STD-2073-1E using prescribed methods including preservation method 41, wrap material 00, and unit container E5, with marking strictly following MIL-STD-129 without special markings. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification level VII with an AQL of 0.1. The item is designated as a critical application, and any configuration changes require an engineering change proposal. The contract enforces CMMC Level 2 self-assessment for cybersecurity compliance and mandates removal of government identification from non-accepted supplies. Delivery is FOB origin to DLA Distribution in San Diego, with inspection and acceptance occurring at destination. The unit of issue is each, with no tolerance for quantity variance, and transportation aligns with DLA procedural notes C19 and C20. The solicitation was posted on August 5, 2026, with responses due the following day, and the material is needed for delivery by March 14, 2026, under a federal procurement administered by the Department of Defense’s Aviation Supply Chain.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in about 21 hours
View Details
NAICS: 336412
New
DIBBS
PARTS KIT, PUMP OVER
Solicitation # SPE4A7-26-T-617Z
This contract specifies the procurement of a parts kit for pump overhaul with fuel control, identified by NSN 2915-00-939-9536 and part number 60-371B901A from Hydro-Aire Aerospace Corp. The requirement is for exactly ten units with no variance allowed, to be delivered FOB origin within 117 days, with a required ship date of December 9, 2026 and an original delivery deadline of September 23, 2027. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific mandates such as the inclusion of two retaining rings MS16627-1112 per kit, a correction to a recurring supplier error. Inspection and acceptance occur at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical attributes requiring a 0.1 AQL. The supplier must also meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and adhere to standardized packaging per MIL-STD-129 and ASTM D3951, with palletization following DLA packaging guidelines. The technical data package is proprietary or insufficient for competitive procurement, classifying the item as critical with no approved specification, and all documentation must satisfy source approval requirements including SAR submission. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker Air Force Base, with transportation governed by DLAD procedural notes. The contract enforces strict labeling, identification, and marking compliance including removal of government identification from non-accepted supplies, and all measuring and test equipment must be calibrated and documented. The unit of issue is each, priced at $10.00 for a total value of $100.00, and the solicitation was issued under contract number SPE4A7-26-T-617Z with a response deadline in August 2026. The purchaser is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with Aaron Miles designated as the primary point of contact. The contract supersedes any conflicting standards, and all requirements, including those marked with R or I numbers, are binding and must be traced to the current DLA Master List revision effective on the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
COVER, SUPPORT ASSEM
Solicitation # SPE8EF-26-Q-0168
The contract specifies the procurement of 25 units of a cover support assembly with dimensions of 9.60 inches in length and 7.20 inches in width, designed for use on the Model 4000 trailer, identified by NSN 1740-00-885-4698 and part number P/N 101719-77 or P/N 101719-79. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with all items palletized accordingly and shipped in compliance with DLA procedures. The contract requires firm fixed pricing with zero variance in quantity, and delivery is due within 60 days after award, with FOB origin and inspection and acceptance occurring at destination. Covered defense information applies, and the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. All supplies must be marked and labeled to prevent government identification on non-accepted items, and shipments must be sent to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with transportation and freight details governed by DLAD procedural notes. The solicitation was issued under contract number SPE8EF-26-Q-0168 with a response deadline in August 2026 and a required delivery date of September 30, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the sleeve bearing with NSN 3110-01-341-6408, previously sourced from KATO ENGINEERING INC. with part number 012-63499-54. This request is purely for market research and does not constitute a solicitation, proposal, or binding commitment from the government. Respondents are asked to identify any sources that can manufacture the item, including the manufacturer’s location by city and state or country, and to provide contact information if available. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil or via phone at 804-718-8776, with responses due by August 12, 2026. Participation is entirely voluntary, and no contract award is guaranteed based on the information received. The solicitation is categorized as a sources-sought notice under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing, and carries no set-aside preferences. It is posted under solicitation number SPE4A6326Q1284 with a primary point of contact at DLA Aviation’s office in Richmond, Virginia, and a secondary contact available for follow-up. The place of performance is also listed in Richmond, Virginia. The notice explicitly states that responses are not offers and the government has no obligation to proceed with procurement as a result of the information gathered. Interested parties are encouraged to submit details by the deadline to assist in identifying potential suppliers for future procurement planning.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
GOVERNOR, PUMP, PRESS_End_Item_TF33_NSN_2915015571122RV_PN_5225-1181
Solicitation # FD20302700090
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of the Governor, Pump, Press with Part Number 5225-1181 and National Stock Number 2915-01-5571122RV, intended for use on the TF33 engine platform. This initiative, issued under Notice ID FD2030-27-00090, is not a solicitation or a commitment to award a contract, and no funds are currently available for this effort. The government is seeking information from potential suppliers capable of full-scale production, including component procurement, inspection, testing, preservation, packaging, and shipping, as well as management of long-lead items, diminishing manufacturing sources, and nonrecurring engineering costs necessary to qualify as an approved source. The estimated requirement is for 37 units, and the industry classification is NAICS 336412 with a size standard of 1,500 employees. All business sizes and categories—including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses—are encouraged to respond. Responses must be submitted via the designated “Add Me to Interested Vendors” button by the deadline of August 6, 2026, 4:59 a.m. Central Standard Time. The point of contact for inquiries is the 421st SCMS Requirements Workflow email, and the place of performance is Tinker AFB, OK 73145. This market research aims to evaluate competition viability and determine if the requirement can be set aside for small business participation, but no contract will result from this notice alone.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336412
New
Federal
NSN 2915-01-313-4615, BYPASS INDICATOR, WSDC: 26F
Solicitation # SPE4A726R0755_SourceSought
The Department of Defense, through DLA Aviation, is conducting market research to identify qualified suppliers capable of manufacturing the bypass indicator identified by NSN 2915-01-313-4615 and part number TD221MF0DCY5. This effort is not a solicitation and no contract award will result from this request. The government seeks capability statements from organizations that can perform the full scope of new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of material shortages. The NAICS code 336412 applies, and the requirement spans a five-year base period with no options. Currently, Pall Aeropower Corp is the approved source, and any other vendor must submit a Source Approval Request to be considered. Responses must include organizational details, capability documentation, and information on subcontracting or teaming arrangements, with no financial liability assumed by the government for submission costs. All submissions are due by August 10, 2026, and must be emailed to TATJANA.KLEMMER@DLA.MIL. The government will use responses to determine whether to set aside the eventual contract for small businesses or pursue full and open competition, potentially making multiple awards. The DLA does not hold complete technical data on the part, further emphasizing the importer for suppliers to demonstrate technical and operational competency. No telephone inquiries will be accepted, and no feedback or evaluations will be provided on submissions. Interested parties should note that the place of performance is undetermined and final unit pricing will be established at contract award time. Questions regarding this market research should be directed to TATJANA.VAUGHAN@DLA.MIL.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Frame, Access Hole _End_Item_B-2_NSN_1560014687510FW_PN_DAA3144A671-067
Solicitation # FD20302602419-SS
The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research under FAR Part 10 to identify potential sources for the new manufacture of a Frame, Access Hole with NSN 1560-01-468-7510FW and part number DAA3144A671-067, intended for use on the B-2 platform. This is not a solicitation or a commitment to award a contract; no funds are currently available, and no contractual obligation will result from responses. The effort aims to assess industry capability, determine if the requirement can be competed, and evaluate potential for a small business set-aside, with interest in all business sizes including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. Respondents must provide comprehensive business information, including CAGE code, UEI, size certification under NAICS code 336413, and ownership details, and must be prepared to meet rigorous qualification standards for sourcing and manufacturing. Potential sources must be capable of full new manufacture including component procurement, inspection, testing, packaging, and shipping, and may be required to assume nonrecurring engineering costs to become an approved supplier. Technical data is not provided by the government, and responders must independently acquire or demonstrate access to necessary engineering drawings and specifications through the designated Public Sales Desk. Compliance with Manufacturing Qualification Requirements (MQR), as referenced under MQR-PSD-1, is mandatory and includes submission of a Source Approval Request (SAR) package via DoD SAFE, accompanied by a certified Company Profile, SIP certifications for critical processes, Master Tooling certifications, and a signed Technical Data Rights Certification using Appendix E wording. Responses must include documentation of NADCAP, OEM, or DoD audit certifications where applicable and adhere to submission protocols strictly through designated email channels. All submissions are due by August 11, 2026, and must be submitted electronically with no oral responses permitted. The government will use this input solely for acquisition strategy development and planning purposes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
FUEL CONTROL MAIN_End_Item_J85_NSN_2915012575403OK_PN_6001T8G09A
Solicitation # FD20302700144
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Fuel Control Main component with part number 6001T8G09A and NSN 2915012575403OK, intended for use on the J85 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award or funding is intended at this stage. The government seeks information from all types of businesses, including small businesses, service-disabled veteran-owned firms, women-owned businesses, 8(a) certified entities, and HUBZone participants, to assess competitive potential and determine if a small business set-aside is feasible. The requirement involves full new manufacture, including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. Manufacturing qualification requires submission of a Source Approval Request package through the DoD SAFE system, accompanied by technical data compliance, including adherence to the Manufacturing Qualification Requirements (MQR-PSD-1) referenced publicly on SAM.gov and any applicable Engineering Data List. Technical drawings, if referenced on the EDL, must be requested through the designated Tinker Engineering Public Sales Desk. Companies responding must provide detailed business information including CAGE code, UEI, NAICS classification, size status, ownership structure, and certifications to support market research objectives. Responses must be submitted by September 3, 2026, and all submissions must be in writing, with no oral responses accepted. The estimated spares requirement is anticipated to be fulfilled by December 27, 2027, though the exact solicitation schedule remains undetermined until market research concludes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC96
The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,COMPRESSOR,AI
Solicitation # SPRPA126QYC98
This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC97
The contract solicitation pertains to the procurement of 586 newly manufactured turbine rotor blades, identified by NSN 0R-2840-017141155-B8 and reference number 5144T23P02, to be delivered FOB origin. This is a single-source acquisition under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition, with only previously government-approved sources being solicited. Refurbished, remanufactured, or repaired parts are strictly prohibited, and all offers must be for brand-new components. Offerors not currently approved sources must submit complete documentation per NAVSUP WSS Source Approval Brochures to demonstrate manufacturing capability, including technical data on similar items or proof of prior approval under review. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at time of proposal submission. The acquisition is being conducted under emergency flexibility authority, waiving the standard synopsis requirement due to urgency. Government inspection and acceptance will occur at the manufacturer’s facility under DLAD clause 46.292, and the contract incorporates DFARS clauses 252.209-7010 for Critical Safety Item identification and potentially 252.242-7005 regarding contractor business systems. The point of contact for all submissions is Brett N. Duffey of the Defense Logistics Agency Aviation in Philadelphia, with proposals due by September 21, 2026. Any proposals lacking the required source approval documentation or failing to confirm prior submission of such data will be deemed technically unacceptable and ineligible for award. While the solicitation allows any responsible source to respond within 45 days, the government reserves full discretion to proceed without competition based on fleet support needs and timelines, and responses will be evaluated solely to determine if competitive procurement is feasible. No award will be delayed if source approval cannot be finalized in time to meet operational demands.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
DIBBS
Manufacture and Supply of Aircraft Escape Slide (NSN: 4240-01-075-6640)The contract requires the full manufacturing, testing, and delivery of seven aircraft escape slides identified by NSN 4240-01-075-6640, aligned with all applicable military specifications and quality assurance standards. Each unit must meet rigorous traceability requirements to ensure component integrity and compliance throughout the production lifecycle, with full documentation maintained for verification and audit purposes. The work is subcontracted under the Department of Defense via the Depot Oklahoma office, and the manufacturing must adhere to NAICS code 336412, which pertains to aircraft parts and equipment manufacturing. Proposals must be submitted by August 10, 2026, with the solicitation posted on August 4, 2026, and all delivered units are expected to satisfy federal defense supply chain protocols. The place of performance is not explicitly defined, but the contract implies operations will support U.S. military logistics, and the end product must be fully functional, safety-certified, and ready for immediate integration into aircraft systems. The subcontract nature indicates the prime contractor will oversee compliance, but the supplier is directly accountable for meeting all technical, quality, and delivery obligations without deviation.
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336413
New
Federal
CYLINDER ASSEMBLY,A_End_Item_B-02_NSN_1650015171294FW_PN_DAA3122A001-091
Solicitation # FD20302700123-00
The U.S. Air Force, through the 423rd SCMS Requirements Office at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential suppliers capable of manufacturing the Cylinder Assembly, Part Number DAA3122A001-091, with NSN 1650-01-517-1294FW, for use on the B-02 platform. This effort is a Sources Sought notice under FAR Part 10 and is not a solicitation or request for proposal; no contract will be awarded based on responses, and no funds are available at this time. The government is seeking information from all eligible businesses—including large firms, small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability and determine whether the requirement can be fulfilled through competition or set aside for small business participation. The requirement involves the new manufacture of two units, including all associated labor, materials, inspection, testing, packaging, shipping, supply chain management, logistics planning, and handling of diminishing manufacturing sources and material shortages. Potential vendors may also be responsible for nonrecurring engineering costs to become an approved source. The North American Industry Classification System (NAICS) code 336413 applies, with a size standard of 1,250 employees. Responses must be submitted by August 13, 2026, through the designated workflow email, and interested parties must select the “Add Me to Interested Vendors” button to be considered. The place of performance is Tinker AFB, Oklahoma, and all communications must be directed to the 423rd SCMS Supply Chain Management Squadron.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
ACTUATOR,ELECTRO-PN_End_Item_B-02_NSN_1650013837666FW_PN_DAB3122A001-017
Solicitation # FD20302700122
The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of an electro-pneumatic actuator with part number DAB3122A001-017 and NSN 1650-01-383-7666FW, intended for the B-02 platform. This effort, issued under Notice ID FD20302700122, is a Sources Sought synopsis under FAR Part 10 and is not a solicitation or binding commitment; no funds are available for this research phase. The government seeks information from all business sizes and categories including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, with the intent to assess competition and determine if the requirement can be structured as a small business set-aside. The estimated need is for four units, and potential suppliers must demonstrate capability to handle full manufacturing cycles including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of part obsolescence or shortages, potentially including nonrecurring engineering costs. The North American Industry Classification System code is 336413, corresponding to a size standard of 1,250 employees, and the item falls under Federal Stock Class 1650. Responses must be submitted through the designated “Add Me to Interested Vendors” mechanism by the deadline of August 13, 2026, 4:59 a.m. Central Standard Time. The government will use responses gathered to inform future acquisition strategy but will not award contracts based on this market research alone. All communications and submissions should be directed to the workflow email provided, and no inquiries for a solicitation will be responded to at this stage. The performance location is firmly established at Tinker Air Force Base, Oklahoma, and the activity is managed under the Air Force Sustainment Center and Air Force Materiel Command.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
Clock, Panel_End_Item_Multi_NSN_6645000763050RK_PN_ABU11A
Solicitation # FD20302501835-02
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a Clock, Panel item identified by NSN 6645-00-076-3050RK and Part Number ABU11A, with an estimated requirement of 13 units. This effort is a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or a commitment to award a contract; no funds are available for this research phase. The government seeks information from potential vendors capable of end-to-end manufacturing, including component procurement, inspection, testing, packaging, shipping, and managing supply chain issues such as diminishing manufacturing sources and long-lead parts. All responses must include detailed business information, including company size, certifications such as Small Business, 8(a), HUBZone, Women-Owned, or Service-Disabled Veteran-Owned status, CAGE code, UEI, and ownership structure. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the government is open to all business types, including teaming arrangements. Potential suppliers must complete and submit a Source Approval Request package electronically through DoD SAFE, either directly with a PKI certificate or via a request for a drop-off if they lack one. Engineering data, including drawings, may be obtained through the Tinker Engineering Drawings Public Sales Desk, though the absence of an Engineering Data List means vendors must independently acquire necessary technical specifications. Responses are due by August 10, 2026, and must be submitted via the designated email address; inquiries sent to official originators will not be answered. This market research aims to determine if the requirement can be filled through competition or set aside for small businesses, and may lead to future solicitations broken out by airframe, though no award is anticipated from this notice. Participation requires using the “Add Me to Interested Vendors” button, and all submissions must be in writing; oral responses are not accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
DIRECTIONAL SLEEVE_End_Item_KC-135_NSN_1650006256630_PN_6-61567-1
Solicitation # FD20302700132
The Department of Defense, through the Air Force Sustainment Center’s 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of the Directional Sleeve, NSN 1650-00-625-6630, with part number 6-61567-1, for use on the KC-135 platform. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contractual commitment or funding exists at this time. The government seeks to determine potential vendor capabilities, assess market competitiveness, and evaluate if the requirement can be set aside for small or disadvantaged businesses, including 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. The estimated requirement is for 21 units, with no repair component identified. Respondents must be capable of full manufacturing, including sourcing components, inspection, testing, packaging, shipping, and managing long-lead items and diminishing manufacturing sources, and may be responsible for nonrecurring engineering costs. Interested parties must complete and submit a Source Approval Request package via DoD SAFE to designated email addresses, along with the required business information, including company name, CAGE code, UEI, NAICS classification, and size status, by August 10, 2026. Technical data is available through the Engineering Data List and Manufacturing Qualification Requirements referenced in the notice, with engineering drawings obtainable through the Tinker Public Sales Desk. Responses must be submitted in writing only, and no oral submissions are permitted. The information collected will guide future acquisition planning and is not binding on the government. All correspondence must be directed through the specified official channels, and vendors are advised to review the official SAM.gov posting for updates to qualification requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
ELECTRONIC COMPONEN_B1B_5998016319586EK_178K787G02
Solicitation # FD20302600791
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of an electronic component identified by part number 178K787G02 and NSN 5998016319586EK for use on the B1B platform. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on this notice. The government is seeking information on potential vendors capable of producing the component from scratch, including sourcing parts, inspection, testing, packaging, shipping, and addressing supply chain challenges such as diminishing manufacturing sources and long-lead items. An estimated requirement of 34 units exists, and potential contractors may also incur nonrecurring engineering costs to qualify as an approved source. The NAICS code is 336413 with a size standard of 1,250 employees, and the government welcomes responses from all business types including small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone businesses, and women-owned small businesses. Responses must be submitted via the designated workflow email, and all deadlines are in Central Standard Time. No funds are available for this market research phase.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336413
New
Federal
Cylinder Assembly_End_Item_B-02_NSN_1650013724178_PN_DAB3122A004-011
Solicitation # FD20302700119
The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of a Cylinder Assembly designated by NSN 1650-01-372-4178 and Part Number DAB3122A004-011 for use on Platform B-02. This is not a solicitation and no contract will be awarded based on this effort; funds are not currently available. The requirement is for three units and encompasses full new manufacture including component procurement, inspection, testing, packaging, shipping, and supply chain management, with potential responsibilities for nonrecurring engineering costs to qualify as an approved source. The effort is focused solely on spares procurement with no repair component involved. The NAICS code 336413 applies with a size standard of 1,250 employees, and the government is actively seeking participation from all categories of businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, to assess competition and potential for a small business set-aside. Responses must be submitted through the “Add Me to Interested Vendors” button and are due by August 6, 2026, 4:59 AM Central Standard Time. All communication should be directed to the designated workflow email, and inquiries for a solicitation will not be addressed as no formal procurement is currently planned.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336413
New
Federal
CYLINDER ASSEMBLY,A_End_Item_B-02_NSN_1650015171312FW_PN_DAA3122A001-089
Solicitation # FD20302700125
The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources capable of manufacturing the Cylinder Assembly, part number DAA3122A001-089, with NSN 1650-01-517-1312FW, for use on the B-02 platform. This effort, initiated under FAR Part 10, is not a solicitation and does not obligate the government to award a contract or allocate funds; rather, it seeks to gather information from industry to assess competition and determine whether the requirement can be fulfilled through a small business set-aside or other optimal acquisition strategy. Interested vendors must register via the “Add Me to Interested Vendors” button to participate in this market research phase. The Government requires suppliers to have the capability to fully manufacture the item from raw materials, including component procurement, inspection, testing, preservation, packaging, and shipping, along with managing supply chain risks such as diminishing manufacturing sources and long-lead items. Nonrecurring engineering costs may apply for qualifying as an approved source. The estimated requirement is three units, with unit pricing to be established only if and when a contract is awarded. The North American Industry Classification System code is 336413, which carries a size standard of 1,250 employees, and the government is actively seeking participation from a broad range of business types including small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone entities, and women-owned small businesses. Responses are due by August 6, 2026, at 4:59 a.m. Central Time, and all communications must be directed to 423scms.guea.workflow@us.af.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336413
New
Federal
Servocylinder Assem_End_Item_B-1_NSN_1650011848758_PN_L5872400-021
Solicitation # FD20302700138
The U.S. Air Force, through the 423rd SCMS at Tinker Air Force Base, is conducting market research to identify qualified sources capable of manufacturing new spares for the Servocylinder Assembly with NSN 1650-01-184-8758 and part number L5872400-021, intended for the B-1 platform. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contract will be awarded based on this posting. The government is seeking information to evaluate potential competition and determine whether the requirement can be set aside for small businesses, including Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Women-Owned Small Businesses. The estimated requirement is for 18 units, with a minimum of 5 and a maximum of 27, and the North American Industry Classification System code is 336413 with a size standard of 1,250 employees. Response must include detailed business information, certification status, and compliance with qualification requirements outlined in the Manufacturing Qualification Requirements and Engineering Data List, which are referenced but not provided in full within the notice. Interested vendors must complete a Source Approval Request package, submitted electronically via DoD SAFE to designated Air Force Sustenance Center contacts, and are required to independently obtain or request engineering drawings through the Tinker Public Sales Desk. The notice emphasizes that no funds are allocated for this market research, and responders must provide accurate data on business size, ownership, and certifications, including Unique Entity ID and CAGE code. All submissions must be in writing and received by September 3, 2026. Government-provided technical data is limited, and vendors are expected to secure necessary engineering documentation independently unless otherwise specified. The procurement strategy remains under evaluation, with potential future solicitation possibly segmented by airframe, and vendors are cautioned that responses will not be acknowledged and no contractual obligations are created by this notice.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
SURPLUS ONLY NSN:1680012672746RK NOUN:ACTUATOR,ELECTROMEC PIN: P/N: R1473M1
Solicitation # SPRTA1-26-Q-0421
The contract pertains to surplus surplus-only availability of an electromechanical actuator identified by NSN 1680012672746RK and part number R1473M1, with no new procurement intended. It was solicited under SPRTA1-26-Q-0421, posted on August 5, 2026, with a response deadline of August 20, 2026, at 8:00 PM UTC. The procurement falls under NAICS code 336413 for aircraft engine and engine parts manufacturing and is handled by the Department of Defense through the Office of DLA Aviation at Tinker Air Force Base, Oklahoma. All transactions and fulfillment are limited to surplus inventory already in government custody, and no new manufacturing or production is involved. The primary point of contact for inquiries is Patrick McGowan, reachable via phone at 405-734-8120 or email at patrick.mcgowan@us.af.mil. The contract type is combined, meaning it may include both purchase and disposal actions, with no specific set-aside for small businesses or other categories. Performance location is not explicitly defined beyond the issuing agency’s base.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details