Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Transportation was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roofing System Installation – Metal Roofing Panels

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 6 hours ago

DEADLINE

in 5 days
NAICS: 238160
New
SLED
REPLACE THE GUTTERS AT THE DEFUNIAK COURTHOUSE
Solicitation # 05-27
Walton County is soliciting competitive quotations for the complete removal and replacement of the internal and concealed gutter system at the three-story DeFuniak Springs Courthouse in Florida. The selected contractor must provide all labor, supervision, equipment, and materials necessary to install a durable, watertight drainage system, including the removal of deteriorated flashing, sealants, and liners. Key requirements include performing a preconstruction assessment to verify dimensions, conducting a controlled water test upon completion, and ensuring all restoration materials are compatible with the existing building. The project requires a final walkthrough with the owner and a comprehensive site cleanup to return the area to its preconstruction condition. Qualified respondents must hold a valid Florida contractor license, such as a Certified General, Building, Roofing, or Sheet Metal Contractor license. Submissions must include a total lump-sum base quotation with an itemized breakdown, a proposed project schedule detailing mobilization and duration, warranty information for both workmanship and materials, and two professional references. The deadline for responses is November 19, 2026, at 12:00 pm, with all submissions and clarifications handled through the OpenGov Procurement portal. Award consideration will be based on price and the ability to meet technical and administrative requirements.
Facility Maintenance

POSTED

about 16 hours ago

DEADLINE

in 22 days

AI Contract Overview

Show more

The contract entails the supply and installation of metal roofing panels along with all associated flashing, sealing, and insulation integration, ensuring full compliance with SMACNA, UL/FM, and ENERGY STAR standards for performance, safety, and energy efficiency. The work is designated as a total small business set-aside under SBA guidelines, with the North American Industry Classification System code 238160 indicating it falls under roofing contractor services, and is issued under the Department of Transportation’s 697DCK Regional Acquisitions Services. All work is to be performed in San Luis Obispo, with responses due by July 17, 2026, at 7:00 PM. This subcontract opportunity is open exclusively to small businesses as defined by the SBA, with no restrictions noted on organization type beyond the set-aside requirement.

General Info

Small business set-aside for metal roofing installation in San Luis Obispo, due July 17, 2026, complying with SMACNA, UL/FM, ENERGY STAR standards.

NAICS

238160 - Roofing Contractors

Place of Performance

San Luis Obispo, CA, USA

Set-Aside

SBA

Documents

This scope was carved out of 697DCK-26-R-00345.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

San Luis Obispo (SBP) ATCT Roof Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and installation of metal roofing panels including flashing, sealing, and insulation integration in compliance with SMACNA, UL/FM, and ENERGY STAR standards.

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

NAICS: 541330
New
Federal
Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA
Solicitation # 697DCK-27-R-00022A
The Federal Aviation Administration is soliciting engineering design services for the renovation of a 4,992 square foot leased building located at 3551 Combine St., Paso Robles, California, to establish a new System Support Center. The selected contractor will be responsible for developing permit-ready Mechanical, Electrical, Plumbing, Life Safety, and Fire Protection documents based on provided Design Intent Drawings. Key deliverables include the submission of final drawings to the City of Paso Robles and the procurement of city-stamped approval, ensuring all work complies with the 2022 California building, mechanical, electrical, and fire codes, as well as ANSI A117-1-2009 accessibility standards. This procurement is a total small business set-aside under NAICS code 541330. The government intends to award the contract based on best value, considering price and other solicitation criteria, following the negotiation of a fair and reasonable price. Interested offerors must submit a business proposal, including completed representations and certifications and past performance information, to Linda Hennequant by November 12, 2026. Submissions must be sent via email in PDF or Word format, ensuring the solicitation number 697DCK-27-R-00022A is included in the subject line. Payment for services will be processed through the Delphi eInvoicing web-portal.
Engineering Services

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 325992
New
Federal
Printer Consumables for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES) Program
Solicitation # 697DCK-25-R-00368
The Federal Aviation Administration (FAA) Office of Information and Technology is seeking a single qualified small business to establish an agency-wide indefinite delivery indefinite quantity (IDIQ) contract for toner and printer consumables under the Strategic Sourcing for the Acquisition of Various Equipment and Supplies (SAVES) program. This total small business set-aside, under NAICS 325992, covers over 750 items from specific original equipment manufacturers, including Brother, Canon, Dell, Epson, HP, Lexmark, Okidata, and Xerox. The contract features a five-year period of performance from February 19, 2027, to February 18, 2032, consisting of one base year and four one-year ordering periods, with a minimum ordering obligation of 1,000 dollars. Award will be made to the Lowest Priced Technically Acceptable (LPTA) offeror. Evaluation is based on non-price factors, including technical acceptability and past experience, and a price proposal evaluated via a discount-based model against manufacturer suggested retail prices. Proposals must be submitted in three volumes: Business, Technical, and Price. Following several amendments, the final proposal due date is November 5, 2026, at 5:00 PM ET. Deliveries are required for CONUS locations to specific delivery points, with OCONUS delivery permitted subject to approved shipping charges. Contractors must maintain a quality system ensuring high responsiveness for quote requests and customer service.
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 5417
New
Federal
BEYOND Phase 2
Solicitation # 697DCK-26-R-00423
Screening Information Request 697DCK-26-R-00423 is a competitive selection process for the Federal Aviation Administration's BEYOND Phase 2 program, managed by the Unmanned Aircraft Systems and Advanced Air Mobility Integration Office. This initiative seeks to award up to eight Other Transaction Agreements (OTAs) to State, Local, Tribal, or Territorial (SLTT) governments to test and evaluate emerging aviation concepts. The program focuses on four programmatic areas—infrastructure, scalability, safety, and automation—and five operational challenges, including controlled airspace, on-airport operations, and cross-border flights. This is a non-funded process where participants are responsible for their own costs, and the period of performance extends through September 30, 2029. Eligible offerors must be instrumentalities of an SLTT government, provide a letter of attestation, and maintain an active registration in the System for Award Management (SAM). Proposals are evaluated on a pass/fail basis for eligibility, followed by a holistic confidence rating of the Technical Submission Package based on goal specificity, innovation, alignment with FAA priorities, and the use of SMART methodology. Following several extensions, the final proposal submission deadline is October 30, 2026, at 3:00 pm ET. Submissions must be sent via email in PDF format, adhering to strict page limits and formatting requirements, including a 26-page limit for the main technical narrative.
Scientific Research and Development Services

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 561730
Federal
CONSOLIDATED WEED CONTROL FOR WESTERN SIDE OF KANSAS CITY DISTRICT FACILITIES
Solicitation # 697DCK-26-R-00432
Solicitation 697DCK-26-R-00432 is a small business set-aside for consolidated weed control services for the Western side of the Kansas City District, managed by the Federal Aviation Administration. The contract is a firm-fixed price award with a performance period spanning a base year from January 1, 2027, to December 31, 2027, and four subsequent option years extending through December 31, 2031. The scope of work requires the contractor to provide all labor, equipment, and materials to perform chemical vegetation management on gravel roadways, general plot areas, ditches, and fence lines across multiple sites, including Wichita, High Plains, Gardner, Kansas City, Ozark, Tulsa, and MCI. Key performance requirements include an initial treatment completed by March 15th and a guaranteed 90 percent vegetation kill rate. The procurement process has been modified through three amendments, which updated site data attachments, revised pricing formulas to include touch-ups, and extended the bid due date to November 6, 2026, at 5:00 PM ET. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability is based on the submission of at least three successful relevant contracts from the past five years and three customer satisfaction surveys with an average rating of Good or higher. Additionally, the contractor must comply with hazardous material identification and Safety Data Sheet requirements, utilize the Delphi e-Invoicing portal, and ensure all personnel are escorted while on FAA property.
Landscaping Services

POSTED

22 days ago

DEADLINE

in 9 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS