Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from California was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roofing System Installation

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 238160
New
SLED
Mesilla Valley Community of Hope Building 5 Re-roof
Solicitation # 26-27-035
Solicitation 26-27-035, issued by the City of Las Cruces Public Works department, is for the re-roofing of Building 5 at the Mesilla Valley Community of Hope located at 999 W. Amador Avenue, Las Cruces, New Mexico. The project has an estimated total cost of 400,000.00 dollars and involves the removal and replacement of all existing insulation, roof membrane, and metal roofing. The scope of work includes the installation of thermoplastic membrane roofing, standing seam metal roofing, and sheet metal flashing and trim, along with additional insulation and cricketing materials to enhance drainage and performance. Additionally, the contractor must replace ceiling tiles and repair deteriorated stucco and windows at the clerestory. The facility must remain fully operational throughout construction, requiring materials to be procured and delivered prior to demolition to minimize disruption. Bids are due by 2:00 pm on November 3, 2026, and must be submitted via the OpenGov portal. The contract will be awarded based on the lowest individual, grouped, or lump sum unit price, with preferences of up to 10 percent available for New Mexico resident veterans, New Mexico residents, local Las Cruces businesses, and the use of recycled content. Awarded contractors must provide performance and payment bonds, proof of insurance, and adhere to prevailing wage rates as per Wage Decision DA-26-3243-B. All work must comply with SMACNA and AAMA 2605 standards, OSHA safety regulations, and New Mexico Administrative Code licensing requirements. The contract includes a one-year correction period for defective materials and workmanship, with liquidated damages set at 500 dollars per day.
Public Works

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 238160
New
SLED
TDF - PIF Rooftop Walkway SP
Solicitation # B-54660
The Illinois Department of Human Services is soliciting bids for the installation of approximately 2,000 feet of anti-slip roofing walkway pads at the TDF Rushville facility. The project requires 1,600 feet of Versico brand pads for existing tan TPO roofing and 400 feet of Firestone brand pads specifically for the Gamma housing unit roof. All pads must be 34 inches wide with a minimum thickness of 150 mil, feature a raised diamond plate tread pattern, and include safety yellow edges if available from the manufacturer. Installation must be performed by an approved Versico and/or Firestone installer in accordance with manufacturer specifications and ASTM standards. To be considered responsive, the prime vendor must perform at least 51 percent of the work using permanent, full-time W-2 employees who have been employed for at least 30 consecutive days prior to bid submission. Vendors must certify compliance with the Illinois Prevailing Wage Act, the Illinois Department Human Rights Act, and various state certifications regarding legal entity status, felony convictions, and tax delinquency. The contract includes a 12-month warranty period and allows for termination for convenience with 30 days' written notice. Payments are processed according to the State Prompt Payment Act, and the contract is contingent upon the availability of funds from the Illinois General Assembly or federal sources.
MENTHLTH444 - Mental Health

POSTED

1 day ago

DEADLINE

in 22 days

AI Contract Overview

Show more

The contract is for the installation of commercial or industrial roofing systems using membrane, metal, or shingle materials under a subcontract awarded by the California High Speed Rail Authority. The solicitation was posted on July 9, 2026, with a response deadline of August 17, 2026, and is classified under NAICS code 238160 for roofing contractors. Work must be performed in Fresno, California, though specific address details are not provided. The contract does not specify a set-aside type or organizational eligibility restrictions, and no point of contact information is listed. Interested parties must submit proposals through the official eProcurement portal before the stated deadline.

General Info

Install commercial/industrial roofing in Fresno via CA High Speed Rail Authority subcontract by August 17, 2026.

Place of Performance

Fresno, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of HSR26-20.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HSR26-20 Cal CLEAN Partnership Agreement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → High Speed Rail Authority
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of commercial or industrial roofing systems including membrane, metal, or shingle materials.

More opportunities from California → High Speed Rail Authority

Same awarding agency

NAICS: 541350
New
SLED
HSR26-26 Re-Bid #2 Fresno Building Inspection
Solicitation # 0000040755
The California High-Speed Rail Authority is seeking an experienced contractor for solicitation 0000040755 to provide comprehensive on-site building inspection services for the Fresno Office located at 1111 H Street, Fresno, CA. The scope of work requires a detailed evaluation of all major building systems, including plumbing, sewer, drainage, electrical, HVAC, roofing, building envelope, life-safety, and visible structural components. The selected contractor must assess these systems for condition, functionality, safety, regulatory compliance, and potential risks, applying current federal, state, and local building codes. Key deliverables include a comprehensive written inspection report with supporting photographs, a prioritized list of corrective actions, rough order-of-magnitude cost estimates for repairs, and participation in a formal review meeting. Bids are due by November 6, 2026, at 2:00 PM. To be eligible, bidders must possess a valid Class A or Class B license from the California Contractors State License Board. The contract will be awarded to the lowest responsive and responsible bidder, with a 3% to 5% incentive applied for Disabled Veteran Business Enterprise participation. Required submission documents include a bidder certification sheet, cost sheet, payee data record, and certifications regarding the Darfur Contracting Act and organizational conflicts of interest. Once awarded, the contractor must provide a draft report within ten business days of completing on-site work and a final report within five business days of receiving feedback. Invoices are to be submitted electronically on a monthly basis to the Authority's Financial Office in Sacramento.
Building Inspection Services

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 238910
SLED
Re-Bid HSR26-24 Clearance and Demolition Services at 16608 8th Avenue, Hanford, CA 93230
Solicitation # HSR26-24
The California High-Speed Rail Authority is soliciting bids for Right-of-Way clearance and demolition services at 16608 8th Avenue, Hanford, CA. The project involves the demolition and removal of a 1,390 square foot single family home and a 672 square foot garage. The scope of work includes the removal of all structures, foundations, and debris, as well as the testing and abatement of lead paint and both friable and non-friable asbestos. Additional requirements include capping sewer lines, site restoration through discing and backfilling, and the implementation of a Storm Water Pollution Prevention Plan or Water Pollution Control Program. The contract term is scheduled from December 1, 2026, through November 30, 2027, with a possible 12-month extension. Bidders must possess specific licenses and certifications, including Class A or Class B and C-21 licenses, C-22 or ASB certification, a C-57 well-drilling license, and a HAZ certificate for hazardous substance removal. Required submissions include a bid bond, and performance and payment bonds are mandatory if the bid exceeds 10,000 and 25,000 dollars, respectively. The award will be based on the lowest responsive and responsible bid, with preferences provided for certified Small Businesses, Microbusinesses, and Disabled Veteran Business Enterprises. All bids must be submitted in a sealed envelope, printed single-sided without binders, and delivered by October 28, 2026, at 3:00 PM.
Site Preparation Contractors

POSTED

21 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 331420
SLED
HSR26-28 Invitation for Bids for Copper Conductors
Solicitation # HSR26-28
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-28 for the procurement of OCS Copper Conductors required for the First Construction Segment of its high-speed rail track. The scope of work involves supplying high-conductivity 150mm2 Copper Tin contact wire and 65mm2 Bz catenary messenger wire for the SNCF S220 OCS system. All materials must be Buy America compliant per 49 U.S.C. 22905 and adhere to specific international standards, including EN 50149, IEC 63190, EN 50182, and EN 50326. The contractor is responsible for the direct handoff of materials to the Authority's onsite contractor at railheads located in Kern and Fresno Counties. The contract will be awarded to the lowest responsible responsive bidder based on the total contract bid price for years one through three. Bids are due by November 13, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submission requirements are strict, requiring a hard copy bid form in a separately sealed envelope, along with a comprehensive bid package submitted both in hard copy and as a single searchable PDF. Bidders must also certify compliance with various state and federal requirements, including non-discrimination, lobbying, and small business goals, specifically targeting 25 percent for small businesses and 3 percent for disabled veteran business enterprises. Contract administration includes electronic monthly invoicing and a requirement for the contractor to submit a detailed delivery plan within 30 days of the Notice to Proceed. Quality assurance is managed through inspections at the place of production and final acceptance testing at the destination. Any products failing random sample reviews will result in a Non-Conformance Report requiring a root cause analysis and corrective action plan. All shipments must follow rigorous packaging and marking standards, including detailed packing sheets and suitable containers to ensure safe transport.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

23 days ago

DEADLINE

in 17 days
View Details
NAICS: 335929
SLED
HSR26-39 Invitation for Bids for Aluminum Conductors
Solicitation # HSR26-39
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-39 for the procurement of Overhead Contact Systems (OCS) Aluminum Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the manufacture and delivery of a complete portfolio of conductors based on the SNCF S220 OCS system, specifically 217,754 meters of Aluminum-Steel static/ground/earth wire (93.3mm2) and 214,334 meters of Aluminum-Steel auxiliary/feeder wire (288mm2). Materials must be delivered to railheads in Kern County (Wasco) and Fresno County, with the contractor providing a direct handoff to the Authority's onsite contractor. The contract will be awarded to the lowest responsible responsive bidder based on the total bid price. Bids are due by November 19, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submissions require a hard copy bid form in a separately sealed envelope, along with both hard copy and electronic versions of the remaining bid package. Key compliance requirements include strict adherence to Buy America standards per 49 U.S.C. 22905, various European (EN) standards for conductors, and ASNT certification for non-destructive testing personnel. Additionally, contractors must comply with the California Prompt Payment Act, which mandates payment of undisputed invoices within 45 days. Bidders must also provide certifications regarding small business status, DVBE/DBE participation, and disclosure of any organizational conflicts of interest or use of generative artificial intelligence.
Other Communication and Energy Wire Manufacturing

POSTED

23 days ago

DEADLINE

in 23 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS