Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Rotary Mower

Active

W911S226U2816Federal

Response Deadline08/07/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "Rotary Mower" is a total small business set-aside opportunity under solicitation number W911S226U2816, posted on March 16, 2026, with a response deadline of March 23, 2026, at 2:00 PM. It falls under the NAICS code 333112, which pertains to manufacturing rotary mowing equipment. The contract type is listed as combined, indicating it may include both supply and service components. The contracting agency is W6QM Micc-ft Drum, an office located at Fort Drum, New York, with the zip code 13602-5220, though the specific place of performance is identified only by the zip code 66442 without detailed city or state information. Prospective bidders can direct inquiries to the primary point of contact, Gary Jungels, or the secondary contact, Yvonne Johnson-Wilson, both of whom are civilian employees of the Army and reachable via provided phone numbers and email addresses. This opportunity is designed to engage small businesses eligible under FAR 19.5 regulations, promoting participation from this segment. Additional information and access to the full solicitation details are available through the specified online portal.

General Info

Small business set-aside for rotary mower supply and services, bidding deadline March 23, 2026.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

333112 - Lawn and Garden Tractor and Home Lawn and Garden Equipment ManufacturingView NAICS

Place of Performance

Fort Riley KS, NY, 66442

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

1 update

PhaseCombined Synopsis

PostedMar 16

Combined Synopsis

Amendment 1Aug 4

Contract was updated

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 03:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts2 people available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Gary Jungels

contact@example.gov

+1 (555) 000-0000

Yvonne Johnson-Wilson

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DUE TO A DELAY IN FUNDING, WINNING VENDORS ON THIS NOTICE ID GAVE NOTICE THAT THE COST OF THE ROTARY MOWER IN THERE QUOTES HAD RISEN. AMENDED SO WE CAN RESOLICITE FOR 3 DAYS. PREVIOUS CONTRACT AMOUNT WAS ZEROED OUT

Similar Contracts

Same NAICS industry code

Request for Quote 70FA5026Q00000013 - Tractor with Snowblower

Solicitation # 70FA5026Q00000013

The Federal Emergency Management Agency is seeking quotes for a firm fixed price task order to procure a brand-name only Ventrac Tractor KN 4520N with Kubota WG972-EFI engine and specific attachments, including an Accessory Kit SA250, V-Blade SE530, Snowblower KX480, Drop Spreader, Finish Mower 72", 72" Blade, and CAB KW452, for use at the Mount Weather Emergency Operations Center in Virginia. This solicitation is exclusively for small businesses and does not permit substitutions; all items must meet exact brand and model specifications. Responses are due by 4:00 PM ET on Friday, August 7, 2026, and no written solicitation will be issued—this notice serves as the complete request. Deliverables are to be shipped to the designated point of contact at Mount Weather, VA. Offerors must submit a complete response addressing three evaluation factors: delivery schedule, past performance, and price/product compliance. For delivery, vendors must indicate the earliest possible timeline on the provided pricing spreadsheet. Past performance requires three relevant examples completed within the last three years, with full details including program title, contract number, work synopsis, and value; affiliate or parent contracts are not acceptable. Pricing must adhere to the official template and include product specification sheets, part numbers, country of origin, shipping address, and confirmation of Trade Agreement Act or Buy American Act compliance. The government will assess responsibility and reasonableness of pricing before award, ensuring all terms align with operational needs. Point of contact for inquiries is Ashlee Young, and the place of performance is Mount Weather, VA.

National Continuity SECTION(CON50)

POSTED

about 22 hours ago

DEADLINE

3750--36C249-26-AP-3080 - Kubota Mowers - Grounds Keeping

Solicitation # 36C24926Q0338

The Tennessee Valley VA Medical Center in Murfreesboro, Tennessee, is conducting market research through a Sources Sought notice to identify qualified vendors capable of supplying commercial-grade grounds maintenance equipment for approximately 300 acres of developed and wooded property. The requirement centers on diesel-powered, heavy-duty equipment including a 4WD front-mount mower with a minimum 36 HP engine, a 60-inch commercial zero-turn mower with a minimum 24 HP diesel engine, and associated attachments for brush cutting and vegetation management. All equipment must feature commercial-grade construction, hydrostatic transmissions, open OBD-II diagnostic compatibility, easy maintenance access, and manufacturer-backed warranty support. The equipment must be new, not refurbished, and capable of operating reliably across varied terrain and weather conditions while minimizing downtime through simple servicing and readily available parts. Respondents must confirm their business classification—such as Small Business, SDVOSB, VOSB, or Large Business—and provide documentation proving authorized distributor status if not the original manufacturer, along with proof of SAM.gov registration and, for veteran-owned businesses, SBA registry certification. Responses must include a capability statement not exceeding ten pages, detailing the company’s ability to meet the technical specifications, along with the UEI number, business address, contact information, and country of origin for all equipment. Submissions must demonstrate compliance with salient characteristics for brand-name-or-equal proposals, including performance data, descriptive literature, OEM part numbers, and warranty terms. A courtesy quote is requested to assist in determining price reasonableness and potential set-aside eligibility, and any applicable federal contract vehicle numbers such as GSA Schedule or NASA SEWP must be provided. Equipment must support rapid attachment interchangeability and be compatible with heavy-duty brush-cutting implements to enhance operational efficiency. All submissions are due by 1:00 p.m. on August 7, 2026, via email or fax, and must be formatted as a Word or PDF document. This notice does not constitute a solicitation, and the government is under no obligation to award a contract or provide feedback. Proprietary or classified information must not be included, and responses may be used for market analysis and future acquisition planning.

249-NETWORK Contract Office 9 (36C249)

POSTED

about 22 hours ago

DEADLINE

COMPACT TOOL CARRIER

Solicitation # W911S226U3922

The U.S. Department of Defense through the Office at Fort Drum, New York, is soliciting bids for a Compact Tool Carrier under solicitation number W911S226U3922, with a posted date of August 4, 2026, and a response deadline of August 11, 2026. This is a combined solicitation set aside exclusively for Small Businesses as defined by the Small Business Administration, and it falls under NAICS code 333112, which pertains to the manufacture of construction and mining machinery. The contract is intended to support military operations and logistics needs at Fort Drum, with performance expected to occur at the specified location in New York. The primary point of contact for inquiries is John Flowers, reachable via email or phone, and all submissions must be made through the SAM.gov platform using the provided link.

W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

Puget Sound VAHCS Tractor Mower

Solicitation # 36C26026Q0906

The contract is for the procurement of a tractor mower under solicitation number 36C26026Q0906, issued by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20 in Vancouver, Washington. The opportunity is a Small Business Set Aside, total, meaning only small businesses are eligible to respond, with the North American Industry Classification System code 333112 identifying it as related to agricultural, construction, and mining machinery manufacturing. The solicitation was posted on August 4, 2026, with proposals due by August 18, 2026, at 9:00 p.m. Eastern Time, and the equipment will be delivered for use at the Puget Sound VAHCS facility in Tacoma, Washington. Primary point of contact for inquiries is Amber Whisenhunt, reachable via email at amber.whisenhunt1@va.gov.

260-NETWORK Contract Office 20 (36C260)

POSTED

about 22 hours ago

DEADLINE

SC-CAROLINA SANDHILLS NWR ORCHARD SPEADER

Solicitation # 140FS326Q0122

The contract titled SC-CAROLINA SANDHILLS NWR ORCHARD SPEADER is a small business set aside solicitation issued under NAICS code 333112, indicating it pertains to the manufacturing of agricultural implements and machinery. It was posted on August 4, 2026, with a response deadline of August 13, 2026, at 9:00 PM Eastern Time. The solicitation is managed by the FWS Sat Team 3 within the Department of the Interior, with the contracting office located in Falls Church, Virginia, 22041. The procurement is specifically reserved for small businesses under the SBA’s Total Small Business Set Aside program, meaning only eligible small business concerns may submit bids. The point of contact for inquiries is Keith Rose, reachable via email at keith_rose@ios.doi.gov or by phone at 6127135423. Although the exact location of performance is unspecified in the provided data, the contract is associated with the Carolina Sandhills National Wildlife Refuge, suggesting work will be conducted in or near that area. The solicitation can be accessed through the official SAM.gov portal for further details and submission requirements.

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3930

The contract involves the procurement of a rotary flex wing cutter under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 333112 indicating machinery manufacturing. The solicitation number W911S226U3930 was posted on August 4, 2026, with responses due by August 11, 2026, at 3:00 PM. The requirement includes a trade-in component, suggesting the replacement of existing equipment. The issuing agency is the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, and the place of performance is listed with a ZIP code of 66442, though the city and state are not specified. Primary point of contact is Gary Jungels, reachable via email and phone, with Yvonne A. Johnson-Wilson serving as secondary contact. The contract is structured as a combined action, indicating potential inclusion of both acquisition and other federal requirements, and interested parties must respond through the SAM.gov portal linked in the solicitation.

W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

Ventrac 4520N Tractor with Accessories

Solicitation # Procurement #164826

Cherokee Nation Entertainment, LLC is soliciting bids for a Ventrac 4520N Tractor along with its accessories through Solicitation #164826, with proposals due by August 7, 2026. The procurement is open to qualified bidders and is being managed by the Cherokee Nation, a sovereign tribal entity based in Oklahoma. All performance of the contract will occur within Oklahoma, and the primary point of contact for inquiries is Rebecca Scheufler, reachable at 918-384-5856. The solicitation is posted on the Cherokee Nation’s official bidding website and does not specify a NAICS code or set-aside classification, indicating it is broadly open to eligible vendors without restrictions based on size, status, or ownership type. Bidders are expected to respond with detailed offers that meet the technical and commercial requirements for the equipment specified.

Cherokee Nation

POSTED

DEADLINE

Guardrail Mower

Solicitation # 645-DOTRFB-2966-2027

The Iowa Department of Transportation is soliciting proposals for a Guardrail Mower under solicitation number 645-DOTRFB-2966-2027, with a response deadline of August 24, 2026 at 6:00 PM Eastern Time. The solicitation is issued by the state and local government agency based in Ames, Iowa, and the work is to be performed in the same location. The contract is intended for the procurement of equipment designed to maintain vegetation along guardrails, ensuring road safety and visibility. All responses must be submitted through the official bidding portal prior to the deadline, and inquiries should be directed to Mallory Hunter, the primary point of contact, via email at mallory.hunter@iowadot.us or phone at 515-239-1347. No specific set-aside status or NAICS code is listed, indicating the contract is open to all eligible vendors without targeted preferences.

POSTED

DEADLINE

3740--Steel Green Sprayer for Asheville VAMC

Solicitation # 36C24626Q0870

The contract is for the procurement of a Steel Green Sprayer and associated accessories under solicitation number 36C24626Q0870, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 in Hampton, Virginia. The solicitation is exclusively reserved for small businesses as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 333112 indicating classification within the irrigation and agricultural spraying equipment manufacturing sector. The contract opportunity was posted on July 31, 2026, and responses are due by August 7, 2026, at 2:00 PM Eastern Time. The primary point of contact for inquiries is Kristine E Woodbury, Contract Specialist, reachable via email at Kristine.Woodbury@va.gov. The place of performance has not been specified, and all deliverables will be managed under the oversight of the VA office located in Hampton, VA, with a ZIP code of 23667.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

2420--VENTRAC 4520N COMPACT TRACTOR

Solicitation # 36C24626Q0831

The Department of Veterans Affairs, through its Network Contracting Office 6 in Hampton, Virginia, is soliciting a single new Ventrac 4520N articulating compact tractor under solicitation number 36C24626Q0831, issued on July 28, 2026. This procurement is set aside entirely for small businesses under NAICS code 333112, with a size standard of 1,500 employees, and will be awarded on a lowest price technically acceptable (LPTA) basis. The tractor must be fully assembled, tested, and operational upon delivery, complete with factory-installed accessories including a heated seat, canopy, dual wheels, weight transfer system, hydraulic kit, and 3-point hitch. Delivery is required by September 1, 2026, to the Charles George VAMC in Asheville, North Carolina, with the contract period extending through August 31, 2027. The contract is firm fixed price and requires compliance with FAR 52.212-4 and VAAR clauses governing domestic shipment, packaging, and delivery. All proposals must be submitted electronically by August 7, 2026, to the Contract Specialist’s email, and must include a technical volume not exceeding 25 pages, pricing details, past performance information, and the required offer form. Contractors must ensure the equipment meets manufacturer specifications and conform to inspection criteria set by the Government, which reserves the right to inspect and accept the item at the delivery location. Acceptance is contingent upon successful operational testing and submission of all required documentation, including owner’s manuals and warranty records. The Government will pay via electronic funds transfer to its designated financial center in Austin, Texas, and contractors must submit invoices electronically through the VA’s designated system, in arrears after delivery. Special requirements include compliance with VAAR 852.204-72 for personnel vetting if access to VA-sensitive information is needed, adherence to 52.222-36 for equal opportunity for workers with disabilities, and prohibition of Kaspersky Lab products under 52.240-91. Offerors must hold an active UEI in SAM, be certified as a small business, and disclose any non-compliance with federal restrictions on covered telecommunication equipment or services within 72 hours. No contract value is specified as pricing is left to be determined by offerors,

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

3750--SALT SPREADERS

Solicitation # 36C24626Q0833

The Department of Veterans Affairs VISN 6, Salem VA Medical Center plans to procure a Brand Name or Equal Boss Salt Spreader through an upcoming solicitation expected to be issued on or about August 3, 2026, under solicitation number 36C24626Q0833. This acquisition is designated as a Small Business Set-Aside with no partial set-aside options, under the NAICS code 333112, which has a size standard of 1,500 employees. The contract requires the contractor to provide all labor, materials, equipment, and delivery necessary for the salt spreader, with a performance period based on a base requirement only. The item will be delivered to the Salem VA Medical Center located at 1970 Roanoke Blvd, Salem, VA 24153. All proposal submissions and communications must be sent via email to ruth.morris@va.gov; telephone inquiries will not be accepted. Contractors are responsible for monitoring the SAM.gov website for the official solicitation, amendments, and all related documents without expecting additional notification. The response deadline for proposals is August 7, 2026, at 3:00 PM Eastern Time. The contracting office is located in Hampton, VA, and the primary point of contact is Contract Specialist Ruth Morris.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

31 FSS Rideable Field Mower

Solicitation # FA568226QA045

The government is seeking to procure a single rideable field/lawn cabin mower, specifically compliant with the TORO brand name or equal specification as outlined in the technical requirements, for use by the 31st Force Support Squadron. The solicitation, identified as FA568226QA045, was posted on July 29, 2026, with responses due by August 28, 2026, and is issued under FAR 52.211-6 Brand Name or Equal. Quoters must ensure their bids remain valid until September 30, 2026, as no funds are currently available, and awards will only be made once funding is secured. All deliveries must be shipped directly to Aviano Air Base in Italy with FOB Destination terms, and bidders assume all submission costs without reimbursement. The procurement is managed by the Department of Defense under the 31st Cons (unit 6102) office located in APO, AE, with point of contact information provided through Mikel Tomaj and Ali Elyousfi. There is no set-asides applied to this solicitation, and the NAICS code is 333112, indicating the category for agricultural and industrial machinery manufacturing. The place of performance is Aviano, Pordenone, Italy, and quotes must align precisely with the technical specifications attached to the combined synopsis and solicitation document. Participation is open, but offers are contingent upon future availability of funding and compliance with all stated delivery and validity requirements.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Solicitation # W911S226U3714

The contract titled Rocket Parts under solicitation number W911S226U3714 is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to respond, with the NAICS code 339999 indicating it falls under Other Miscellaneous Manufacturing. The opportunity was posted on July 16, 2026, with proposals due by July 23, 2026, at 9:00 PM Eastern Time. The place of performance is associated with ZIP code 10996, though specific city and state details are not provided. Jessica Kelley serves as the primary point of contact, reachable via email at jessica.l.kelley24.civ@army.mil or by phone at 845-938-4955. Interested small businesses must submit responses through the SAM.gov portal linked in the solicitation.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Fort Drum Snow Removal

Solicitation # W911S227QA002

The U.S. Army at Fort Drum, New York is soliciting bids for snow removal services under solicitation number W911S227QA002, which is exclusively reserved for small businesses as a total set-aside under the SBA program. The requirement, classified under NAICS code 561730, is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum, located at Fort Drum, NY 13602-5220. Proposals must be submitted in accordance with the instructions provided in the official document CSS_W911S227QA002, with a firm deadline of August 7, 2026, at 2:00 PM Eastern Time. Interested parties must note that critical map attachments necessary for proposal development are not available through standard public channels due to their sensitive nature; access must be requested directly via email to kayla.m.rogers14.civ@army.mil and mary.e.summerlin3.civ@army.mil, including the organization's name, CAGE code, and the solicitation number. Primary point of contact for inquiries is Kayla Rogers, reachable by phone at 315-722-2342.

Landscaping Services

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3933

The contract titled Compressor Sets is a Small Business Set Aside under NAICS code 333415, reserved exclusively for small businesses, and issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. Solicitation number W911S26U3933 was posted on August 4, 2026, with a response deadline of August 10, 2026, at 6:00 p.m. Eastern Time. The procurement is classified as a combined solicitation, indicating it may include both solicitation and award actions within a single process. The place of performance is listed with a zip code of 76544, suggesting delivery or performance may occur in or near Texas, though specific location details are not provided. Rachel Rosenbaum serves as the primary point of contact, reachable via email and phone for inquiries. Interested parties must submit proposals through the SAM.gov portal before the stated deadline to be considered for award.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Firefighter Bunker Gear.

Solicitation # W911S226U3698

The contract solicitation for Firefighter Bunker Gear is issued under solicitation number W911S226U3698 by the Department of Defense through the Office of W6QM Micc-Ft Drum, located in Fort Drum, New York. The procurement is a Small Business Set Aside with total set-aside status, exclusively open to small businesses. The NAICS code has been amended to 339999, and the PSC code has also been updated to reflect accurate product categorization. The original response deadline has been extended to August 7, 2026, at 6:00 PM Eastern Time, following the initial posting date of August 4, 2026. The place of performance is listed with a ZIP code of 22060, though the specific city and state are not detailed. Primary point of contact is Aubrey Hoover, reachable via email and phone, with Eric Martinez as the secondary contact for further inquiries. The solicitation is classified as combined, indicating it may include both acquisition and assistance elements, and all interested parties must submit responses through the official SAM.gov platform before the revised deadline.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Fire protection pipe

Solicitation # W911S226U3938

The contract seeks fire protection pipe under solicitation number W911S26U3938, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York. It is a Small Business Set Aside, meaning only eligible small businesses may respond, with no subcontracting restrictions specified. The North American Industry Classification System code is 331210, indicating the focus is on metal pipe and tube manufacturing. Proposals must be submitted by August 11, 2026, at 6:00 p.m. EDT, with the opportunity posted on August 4, 2026. The place of performance is listed with a zip code of 74501, though the city and state are unspecified, suggesting potential delivery to a location in Oklahoma or nearby. Mike Fabry is the primary point of contact, reachable via email at mike.j.fabry.civ@army.mil or phone at 918-420-6580. The contract is classified as combined, meaning it may include both acquisition and service elements related to the supply and potential installation of fire protection piping systems for military infrastructure.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3741

The contract pertains to the procurement of freezers designed for outdoor use, with a solicitation number W911S26U3741 issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The requirement is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, and the North American Industry Classification System code 333415 identifies the industry as refrigerator and home freezer manufacturing. The solicitation was posted on July 20, 2026, with a response deadline of July 24, 2026, and is classified as a combined solicitation. The primary point of contact is Dakota Moore, reachable via email and phone, with the place of performance listed under ZIP code 71459, indicating the equipment will be delivered to a specific military location requiring outdoor-capable refrigeration units. The amendment specifically confirms the necessity for the freezers to be engineered for outdoor environmental conditions, which likely includes protection against weather extremes, temperature fluctuations, moisture, and potential exposure to dust or corrosive elements. This critical design parameter ensures operational reliability in non-controlled environments where traditional indoor units would fail. All bidders must demonstrate technical compliance with outdoor durability standards, and proposals are expected to address environmental sealing, structural integrity, insulation performance, and power system resilience. The contract is part of a broader effort by the U.S. Army to enhance logistical and storage capabilities at remote or forward-deployed sites, and all submissions must align with federal procurement guidelines and the intent of supporting small business participation.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3901

The contract titled STEEL PLATE under solicitation number W911S226U3901 is a total small business set aside with a North American Industry Classification System code of 331110, specifically targeting steel plate procurement. The response deadline has been corrected and extended to August 11, 2026, at 8:30 PM EDT, following the identification of an error in the originally posted date of August 3, 2026. The contract is classified as a combined solicitation and is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. The place of performance is associated with ZIP code 61299, though the specific city and state have not been detailed. All responses must be submitted by the revised deadline to be considered. The primary point of contact for inquiries is Cindy Jepsen, reachable via phone at 309-782-8389 or email at cindy.k.jepsen.civ@army.mil. The contract falls under the Small Business Administration set aside category, ensuring eligibility and preference are reserved for small businesses. Multiple CLINs are included under this solicitation, all subject to the total small business set aside designation, emphasizing the agency’s commitment to contracting with qualified small businesses for steel plate requirements. The official solicitation page can be accessed through the SAM.gov link provided for further details and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 22 hours ago

DEADLINE

Extrication Combi Tools.

Solicitation # W911S226U3843

The solicitation for Extrication Combi Tools is issued under solicitation number W911S26U3843 by the Department of Defense through the Office of W6QM Micc-Ft Drum, located in Fort Drum, New York. The procurement is classified as a combined solicitation exclusively reserved for small businesses under the SBA Total Small Business Set Aside program and falls under NAICS code 333515, which pertains to the manufacturing of specialized construction and mining machinery. The original response deadline was set for August 7, 2026, at 6:00 PM, but the reason for amendment is to extend the response date, indicating a delay in the submission window without altering the core requirements. The place of performance is listed with a zip code of 22060, suggesting delivery or service location may differ from the contracting office. Primary point of contact is Aubrey Hoover, reachable via email and phone, with Eric Martinez listed as the secondary contact. The opportunity is publicly accessible through the SAM.gov portal, and all interested small businesses must submit proposals before the revised deadline to compete for the contract.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3927

The contract titled VERTICAL LIFT, identified by solicitation number W911S226U3927, is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a ZIP code of 13602-5220. It is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program and falls under the NAICS code 333120, which corresponds to the manufacturing of industrial machinery. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, at 3:00 PM Eastern Time. The place of performance is designated with a ZIP code of 66442, though no specific city or state is provided for the performance location. Primary point of contact for inquiries is Gary Jungels, reachable at 520-945-4198 or gary.j.jungels.civ@army.mil, with Yvonne A. Johnson-Wilson serving as the secondary contact at 520-945-4596 or yvonne.a.johnson-wilson.civ@army.mil. Bidders must navigate the opportunity through the official SAM.gov portal via the provided UI link.

Construction Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3926

The contract titled LIFT solicits proposals for a MAST BOOM LIFT under solicitation number W911S226U3926, with a posted date of August 4, 2026, and a response deadline of August 11, 2026, at 3:00 PM. This is a combined solicitation designated as a Small Business Set Aside with full set-aside status, meaning only qualified small businesses are eligible to respond. The North American Industry Classification System code is 333120, indicating the requirement falls under the manufacturing of construction and mining machinery. The awarding organization is the Department of Defense through the W6QM Micc-Ft Drum office located at Fort Drum, New York, with a ZIP code of 13602-5220, though the place of performance is listed with a ZIP code of 66442, suggesting potential delivery or service locations outside the office’s immediate vicinity. Primary point of contact for inquiries is Gary Jungels, reachable via email and phone, with Yvonne A. Johnson-Wilson as the secondary contact. All submissions and communications must adhere strictly to the Federal Acquisition Regulation guidelines applicable to this procurement, and bidders are directed to the official SAM.gov link to access the full solicitation documents and submission portal.

Construction Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Armament Tool Kit

Solicitation # W911S226U3925

The contract titled Armament Tool Kit is a small business set-aside opportunity issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is solicited under number W911S226U3925 with a posted date of August 4, 2026, and a response deadline of August 11, 2026, at 9:00 PM Eastern Time. The North American Industry Classification System code is 339999, indicating it pertains to other miscellaneous manufacturing. The tool kit must be supplied according to the brand name or equivalent bill of materials specified in the attached solicitation, and the place of performance is listed as 98433. The primary point of contact for inquiries is Michael Buzy, reachable via email at michael.h.buzy.mil@army.mil or by phone at 9085662858. The solicitation is a combined action and is restricted to small business concerns as defined by the Small Business Administration.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE