Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Rotary Pump Repair and Overhaul Services

Active

Federal

Response Deadline10/14/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense involves providing full technical repair and overhaul services for Rotary Pumps (NIIN: 015125098) in support of Navsup Weapon Systems Support Mech projects. The selected contractor is responsible for executing all repairs according to specific technical orders and drawings using specialized rotary pump tooling. The final deliverables must be fully repaired, tested, and marked in accordance with CMIL-STD-130, REV N, and packaged following MIL-STD-2073 and MIL-P-16749 standards. The project falls under NAICS code 811210 and requires the contractor to support Government Source Inspection to ensure quality and compliance. Interested parties should note the response deadline of October 14, 2026. The primary objective is the delivery of fully operational, certified rotary pumps that meet all specified military standards and technical requirements.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QJA05.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP,ROTARY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 14

Submission deadline

Response Deadline

10/14/2026, 08:30:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs full technical repair and overhaul of Rotary Pumps (NIIN: 015125098) for prime contractors on Navsup Weapon Systems Support Mech projects. Executes repairs per technical orders and drawings using specialized rotary pump tooling. Marks items per CMIL-STD-130, REV N and packages per MIL-STD-2073 and MIL-P-16749. Supports Government Source Inspection (GSI). Delivers a fully repaired, tested, and marked rotary pump.

Similar Contracts

Same NAICS industry code

Bowl Assembly Repair and Overhaul Services

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

Check Valve Repair and Overhaul ServicesThis subcontract for Check Valve Repair and Overhaul Services involves the teardown, evaluation, and repair of 46 check valves under NSN 4820-01-224-4688 for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling the valves to assess wear, executing repairs according to contractor standard practices and technical orders, and conducting pressure and functional testing based on manufacturer specifications. The project requires strict adherence to MIL-STD-130 for marking and falls under NAICS code 811210. Managed by the Department of Defense, the contract requires the delivery of fully repaired and tested units. The solicitation was posted on October 7, 2026, with a response deadline of October 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QDE08

Solicitation NO00104-25-Q-DE08, issued by NAVSUP Weapon Systems Support Mech, is a small business set-aside for the repair of 70 circuit card assemblies (NSN 5998-015295211, Ref NR 1715296-101). The government intends to solicit this requirement from a single source under FAR 6.302-1, as it has been determined uneconomical to purchase the technical data or reverse engineer the part. All repair work must adhere to the contractor's standard overhaul practices and meet the operational requirements of CAGE Code 072E5 and TDP Version 008. The contract has transitioned from Simplified Acquisition Procedures to Contracting by Negotiation procedures under FAR Part 15. Award will be made to the responsible offeror determined to be most advantageous to the government, with past performance weighted as more important than price. Evaluation of past performance may utilize the DoD Supplier Performance Risk System color ratings. Key deliverables include the repaired assemblies delivered within 67 days to DLA Distribution New Cumberland, PA, with packaging and marking strictly following MIL-STD-2073 and MIL-STD-129. Inspection and acceptance will occur at the origin, and Government Source Inspection is required. Payment will be processed electronically via the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

INFO/SPSV - VuWall Maintenance Renewal

Solicitation # SRC0000036982

Department Of Corrections, Information Systems

POSTED

about 21 hours ago

DEADLINE

HealthBOT 2000 Maintenance and Support ServicesThe HealthBOT 2000 Maintenance and Support Services subcontract involves providing twelve consecutive months of specialized service and maintenance for prime contractors working on City of Houston Houston Airport System projects. The scope of work includes performing routine maintenance, troubleshooting technical issues, and managing warranty claims for defective parts to maintain continuous operational availability. To ensure high quality of service, the contract requires the use of manufacturer-certified technicians. The primary objective is to deliver a full year of documented maintenance and guaranteed operational uptime. Interested parties should note the response deadline of October 12, 2026.

City of Houston

POSTED

DEADLINE

Kiosk Technical Installation and Commissioning ServicesThis subcontract for Kiosk Technical Installation and Commissioning Services involves the professional setup and deployment of HealthBOT 2000 Kiosks for prime contractors working on City of Houston Houston Airport System projects. The scope of work includes unpacking the units, physical placement, and the configuration of all necessary electrical and network connectivity. The service provider is responsible for performing comprehensive software configuration and system testing to ensure each unit is fully operational. The final deliverable is a commissioned and fully functional HealthBOT 2000 Kiosk. This opportunity was posted on October 6, 2026, with a response deadline of October 12, 2026, under NAICS code 811210.

City of Houston

POSTED

DEADLINE

Sports Score Clock Maintenance and Testing ServicesThe Sports Score Clock Maintenance and Testing Services subcontract involves providing specialized technical support for electronic score clock systems on municipal projects for the City of St. John's. The selected provider will work under prime contractors to perform initial and annual inspections of both hardware and software, ensuring timing accuracy and display integrity. Responsibilities include routine electronic maintenance utilizing specialized diagnostic software and the delivery of comprehensive inspection reports to ensure all systems are fully operational. Compliance with Occupational Health and Safety standards and the implementation of a Site Specific Safety Plan are mandatory requirements for this engagement. Interested parties must submit their responses by October 23, 2026, at 5:30 PM. This opportunity falls under NAICS code 811210 and is focused on maintaining critical sports infrastructure within the city's municipal portfolio.

City of St. John's

POSTED

DEADLINE

Sports Field Lighting and Clock Maintenance

Solicitation # 2026145

The City of St. John's is seeking a standing offer agreement for the provision of all labor, materials, testing, equipment, and services required for the maintenance of sports field lighting and score clock systems on municipal properties. The contract follows a low-bid procurement process where the award is granted to the top-ranked compliant respondent based on price evaluation, with ties resolved by a coin toss. The term of the agreement is for three years, with an option for the City to extend the contract for up to an additional two years. The scope of work focuses on inspection and testing, with an initial inspection upon award followed by annual inspections. The contractor must provide PDF reports immediately following testing and maintain emergency response availability 365 days a year, with a required on-site arrival time within two hours of a call. All electrical work must comply with the St. John's Electrical By-Law and manufacturer instructions, utilizing personnel experienced in calibrating sports field lighting and clocks. Successful respondents must meet mandatory technical and submission requirements and provide a Workplace NL Certification, a Certificate of Good Standing from the Newfoundland and Labrador Registry of Companies, and an Occupational Health and Safety Declaration. Insurance requirements include commercial general liability and automobile liability of at least 2 million dollars per occurrence, with the City named as an additional insured. The contractor is also required to indemnify the City against all liabilities and losses arising from the performance of the contract.

City of St. John's

POSTED

DEADLINE

Regulating Valve Repair and Overhaul ServicesThis subcontract for Regulating Valve Repair and Overhaul Services involves the teardown, evaluation, and repair of Regulating Valve NSN 4820-01-366-2013 to support prime contractors on Department of the Navy projects. The scope of work includes disassembling the valve to assess wear, executing repairs according to CAGE Code 04962 Reference No. SM4-40 (40)151-1500/10-S5, and conducting functional pressure testing to ensure operational integrity. The project requires precision machining and strict adherence to MIL-STD-130 marking standards. The final deliverable is a fully repaired, tested, and marked valve. This opportunity is managed under NAICS code 811210 for the Navsup Weapon Systems Support Mech within the Department of Defense, with a response deadline of October 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Digital Converter Repair and ModificationThis subcontract, titled Digital Converter Repair and Modification, involves providing specialized technical services for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The scope of work focuses on the teardown, evaluation, repair, and modification of Digital Converters, specifically NSN 7HH 7050-01-612-6039, for prime contractors on NAVSUP projects. The contractor is responsible for disassembling units to diagnose faults, replacing electronic components using precision soldering and diagnostic equipment, and ensuring all units are restored to full operational status. The project requires strict adherence to MIL-STD-130 and MIL-STD-129 standards. Classified under NAICS code 811210, the opportunity was posted on October 6, 2026, with a response deadline of November 5, 2026. The primary objective is the delivery of fully repaired and modified units that meet all specified reference numbers and military requirements.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Calibration and Preventive Maintenance for Leica Laser TrackersThis subcontract involves providing specialized calibration and preventive maintenance for Leica Laser Trackers to support prime contractors on Air Force projects at Tinker AFB. The scope of work specifically requires the execution of Serv C26-132 Leica RPMP calibrations and inspections in accordance with the Performance Work Statement. To ensure accuracy and compliance, the contractor must utilize specialized calibration standards to certify the equipment and provide final certified calibration reports. Eligible providers must hold the necessary certification or authorization to service Leica Geosystems equipment. This effort falls under NAICS code 811210 and is managed by the Department of Defense agency FA8125 Afsc Pzima. The project is centered in the 73145 zip code area, with a response deadline set for October 20, 2026.

FA8125 Afsc Pzima

POSTED

DEADLINE

EDS/EBSD System Support ServicesThe EDS/EBSD System Support Services subcontract, managed through the NASA Shared Services Center, provides essential technical support and maintenance for upgraded systems at the NASA Langley Research Center in Hampton. Over a 51-month performance period, the contractor is responsible for ensuring continuous system uptime through technical troubleshooting, regular software updates, and comprehensive hardware maintenance. To fulfill the requirements of this agreement, the contractor must deploy certified Oxford Instruments technicians who are granted authorized site access to the facility. This long-term engagement is categorized under NAICS code 811210 and is designed to maintain critical operational capabilities for prime contractors working on NASA LARC projects.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Optoelectronic Components for Display AssemblyThis subcontract involves the supply of raw materials, glass, circuitry, and specialized optoelectronic components for display assemblies supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. All sourced components must strictly adhere to TDP Version O07 specifications, and the provider is required to ensure full traceability for all non-manufactured items. Materials must be packaged according to MIL-STD-2073 and comply with OSHA/FED STD 313 regulations regarding hazardous materials. The contractor is responsible for delivering certified components or raw materials by the established deadlines, with the response window for this opportunity closing on October 22, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacture of Optoelectronic Display (NIIN: 015626905)This subcontract involves the manufacture of Optoelectronic Display assemblies (NIIN: 015626905) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must fabricate units in strict accordance with TDP Version O07 and ensure all physical identification and marking comply with MIL-STD-130, REV N. Additionally, the contractor is responsible for coordinating Government source inspections to verify quality and compliance. Operational requirements include the possession of specialized optoelectronic assembly equipment and strict adherence to OSHA and FED STD 313 standards for the handling of hazardous materials. This opportunity falls under NAICS code 334511, with a response deadline set for October 22, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Fluid Valve Stems (NIIN 013374290)This subcontract involves the manufacture and supply of precision-machined fluid valve stems (NIIN 013374290) for Department of the Navy shipboard system projects. The contractor is responsible for processing QQ-N-286 nickel alloy in Form 2, Annealed and Age Hardened, Hot Finished condition. The scope of work includes precision machining as well as performing quantitative chemical and mechanical analyses to ensure component integrity. Strict quality and compliance standards are required, specifically Special Emphasis Material Level I Certification and calibration adhering to MIL-STD-46662 or ISO10012-1. Final deliverables consist of the completed valve stems accompanied by the DI-MISC-80678 certification report. This opportunity is managed by the Navsup Weapon Systems Support Mech under NAICS code 332721, with a response deadline of November 6, 2026.

Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization Services

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Oxygen Clean Processing for Display Unit Components

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

Manufacture of Display Units (NSN 1HM 7025-01-545-9501)

Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

Interface Board Component SupplierThis subcontract involves the supply of military-grade electronic components, including capacitors, resistors, and integrated circuits, to support prime contractors for Navsup Weapon Systems Support Mech projects. The primary objective is the delivery of certified components specifically required for the repair of Interface Boards under NIIN 016686773. All provided materials must strictly adhere to TDP Version 004 specifications and be delivered using ESD-safe packaging. Managed under the Department of Defense, the contract emphasizes the critical need for component authenticity to mitigate the risk of counterfeit parts entering the defense supply chain. Interested parties must respond by November 6, 2026, in accordance with the guidelines set for NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Interface Board Teardown, Evaluation, and RepairThis subcontract for the Department of Defense involves the technical restoration of Interface Boards (NIIN 016686773) for Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling boards to identify faults, performing repairs or modifications according to TDP Version 004 and IRPOD, and validating all functionality against strict military specifications. To ensure quality and compliance, the contractor must utilize ESD-protected work areas and specialized diagnostic equipment while adhering to MIL-STD-2073 and MIL-STD-129 standards. The project requires the delivery of fully repaired Interface Boards and the submission of CAV reporting. This opportunity falls under NAICS code 335129 and was posted on October 7, 2026, with a response deadline of November 6, 2026.

Other Lighting Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves the specialized packaging of sensitive test equipment in strict compliance with MIL-STD-2073 and MIL-STD-129 standards. Responsibilities include the application of all necessary shipping labels, markings, and IUID labeling to ensure regulatory adherence. The selected provider is responsible for FOB Destination transportation, ensuring that all properly packaged and labeled equipment is delivered securely to designated Navy destinations. This opportunity falls under NAICS code 488510, with a response deadline set for November 6, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Surge Pro Test SetThis subcontract involves the manufacture and supply of the Surge Pro Test Set, part number 1007N250, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The contractor is responsible for producing the units according to Bechtel Plant Machinery Inc specifications, ensuring the use of mercury-free components throughout the manufacturing process. The scope of work includes rigorous quality assurance inspections, the application of IUID and DLR labeling, and strict adherence to MIL-STD-2073 and MIL-STD-129 packaging standards. To finalize the delivery, the contractor must provide a Certificate of Compliance along with the completed test sets.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and FOB Destination ShippingThis subcontract involves providing specialized packaging and shipping services for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg projects. The scope of work requires packing units in accordance with MIL-STD-2073-1 and ASTM D3951-18 standards, utilizing MIL-SPEC crates, moisture barriers, and cushioning to ensure the prevention of premature disk failure. The contractor is responsible for managing FOB Destination transport and ensuring the secure delivery of components to the Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology division in Indian Head, Maryland. This opportunity falls under NAICS code 484220 and is associated with the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Oxygen/Nitrogen Cleaning and Non-Magnetic Inspection ServicesThis subcontract involves providing specialized oxygen and nitrogen cleaning and non-magnetic inspection services for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg projects. The scope of work requires the removal of organic contaminants in accordance with MIL-STD-1330 and the execution of non-magnetic inspections following MIL-DTL-19595 standards. To fulfill these requirements, the provider must maintain certified oxygen-cleaning facilities and utilize specialized non-magnetic testing equipment. The final deliverables consist of components that have been cleaned and inspected, accompanied by a formal certification of compliance. This opportunity is categorized under NAICS code 311812 and is associated with the Department of Defense. Interested parties should note the response deadline of November 6, 2026.

Commercial Bakeries

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS