Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Rotary Pump Unit Fabrication and Assembly

Open

Federal

Response Deadline12/07/2026, 03:30:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and assembly of one Rotary Pump Unit, identified by NIIN 013128289, for prime contractors supporting DLA supply contracts. The work is managed under the Department of Defense through SPRMM1 DLA Mechanicsburg and falls under NAICS code 333914. The contractor is responsible for fabricating pump components according to TDP Version 002 and ensuring assembly adheres to OEM Cage Code 07524 specifications. Key compliance requirements include performing physical identification in accordance with MIL-STD-130 and reporting all end items via Wide Area WorkFlow. The final deliverable is one completed and tested Rotary Pump Unit. The solicitation was posted on November 9, 2026, with a response deadline of December 7, 2026.

General Info

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM127QMA07.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP UNIT,ROTARY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineDec 7

Submission deadline

Response Deadline

12/07/2026, 03:30:00 PM ESTin 28 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures one Rotary Pump Unit (NIIN 013128289) for prime contractors on DLA supply contracts. Fabricates pump components per TDP Version 002 and assembles units according to OEM Cage Code 07524 specifications. Performs physical identification per MIL-STD-130 and reports end items via Wide Area WorkFlow (WAWF). Delivers one completed and tested Rotary Pump Unit.

Similar Contracts

Same NAICS industry code

PUMP UNIT,ROTARY

Solicitation # SPRMM127QMA07

This fixed-price solicitation, issued by DLA Mechanicsburg, seeks the manufacture and delivery of one rotary pump unit (NIIN 013128289) conforming to the design represented by Cage Code 07524, reference number E-4561. The procurement follows the Lowest Price Technically Acceptable (LPTA) criteria, with award based on the lowest priced offer that meets all technical requirements. Delivery is requested as soon as possible (ASAP) on a FOB Destination basis. The government requires quotes to remain valid for at least 90 days. The contractor is responsible for all inspection and acceptance, which will occur at the contractor's or subcontractor's plant. Strict adherence to MIL-STD-130 for identification and MIL-STD-2073 for packaging is required. If additive manufacturing is utilized, the contractor must maintain a Master Component Traceability Ledger and submit it electronically via the NAVSUP HQ AM mailbox and WAWF. All invoicing and receiving reports must be processed through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

EJECTOR ASSEMBLY

Solicitation # N0010427QTA22

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

RESERVOIR, HYDRAULIC

Solicitation # SPE7L4-27-T-1107

Solicitation SPE7L4-27-T-1107 is a request for the procurement of 17 hydraulic reservoirs (NSN 4320-01-422-2579) for the DLA Weapons Support LSO Combat Vehicles and Armament. The contract is structured as a fixed-price acquisition with a required delivery date of June 29, 2027, and a delivery timeline of 221 days after order. Performance is based on FOB Origin, with the final destination being DLA Distribution Anniston in Alabama. The procurement is subject to several technical drawing specifications and requires adherence to the DLA Master List of Technical and Quality Requirements. The contract mandates strict quality and security standards, including inspection and acceptance at origin and compliance with SAE AS9003 or ISO 9001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the agreement incorporates rigorous cybersecurity requirements, including DFARS 252.204-7012 for safeguarding covered defense information and NIST SP 800-171 assessment requirements. All invoicing and payment processing must be conducted electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

ROTOR AND SHAFT PUMP A

Solicitation # SPE7M1-27-T-2449

This contract, issued by the DLA Weapons Support Maritime Supply Chain, is a solicitation for the procurement of three rotor and shaft pump assemblies, identified by NSN 4320-00-582-4015. The required hardware includes Dover Pumps and Process Solutions parts 221476 and E3968PC13. This is a total small business set-aside under NAICS code 333914, with a delivery lead time of 165 days after order. The need ship date is May 4, 2027, with a required delivery date of May 21, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including a prohibition on the intentional addition of mercury, except for specific functional uses. Technical and quality requirements are governed by the DLA Master List, and manufacturers must comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Key regulatory clauses include the Buy American and Balance of Payments Program, destination inspection per FAR 52.246-2, and various DFARS cybersecurity and telecommunications restrictions. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-2981

Solicitation SPE7M4-27-T-2981 is a Small Business Set-Aside Request for Quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of six bypass tubes, identified by NSN 4320007909742 and Eaton Aerospace part number DS-933252. The contract requires delivery within 165 days after order, with a need ship date of May 4, 2027, and a final required delivery date of July 27, 2027. Shipping is handled FOB Origin, with the destination for inspection and acceptance located at the DLA Distribution Depot Hill at Hill AFB, Utah. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling compliant with MIL-STD-129. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals. Administratively, the contract mandates the use of the Wide Area WorkFlow system for invoicing and incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the Buy American Act. Quotations are due by November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

PUMPING UNIT, CLEAR WAT

Solicitation # SPE7M1-27-T-2467

This solicitation, SPE7M1-27-T-2467, is a Small Business Set-Aside for the procurement of 21 electric pumping units for clear water (NSN 4320-01-527-6154) for the DLA Weapons Support Maritime Supply Chain. The contract is a Request for Quotations with a delivery period of 315 days, FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is identified as a commercial item and a critical application item, requiring strict configuration control per MIL-STD-973 since it is a Navy field-level repairable item. Key technical requirements include a First Article Test (FAT) where the contractor must test two units, with one unit consumed during destructive testing and the other serving as a manufacturing standard. Quality assurance is governed by ISO 9001:2015 standards and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK15276154. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-2477

Solicitation SPE7M1-27-T-2477, issued by the DLA Weapons Support Maritime Supply Chain, is a request for one pump rotor (NSN 4320-01-375-7314, Part Number MD08 8853). The requirement specifies a delivery timeframe of 20 days after order, with shipping handled via the fastest traceable means to a destination in New Ulm, Minnesota. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001, and the use of Class I Ozone Depleting Chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the maintenance of active representations in the System for Award Management. All quotes must be submitted via the DIBBS portal by November 19, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

PUMP, HYDRAULIC RAM, HAN

Solicitation # SPE7M1-27-T-2463

Solicitation SPE7M1-27-T-2463 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 209 hand-driven hydraulic ram pumps (NSN 4320-01-432-0321). This is a critical application item that may require specialized tooling, casting, and forging for manufacture. The procurement is a total small business set-aside under NAICS code 333914, with deliveries managed via the First Destination Transportation program and a delivery timeline of 343 days after award. The contract mandates strict adherence to technical drawings, including Army SPE7M1-27-T-2463 and specific chemical agent resistant coatings. Quality assurance is governed by ISO 9001:2015 standards, with inspection and acceptance occurring at the origin. Key requirements include a prohibition on additive manufacturing, a ban on Class I ozone depleting chemicals, and compliance with the Berry Amendment and Buy American Act. Offerors must provide detailed documentation, including process sheets and shock extension reports, and utilize the Wide Area WorkFlow system for invoicing.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Обладнання для очищення води на основі зворотного осмосу (2 найменування)

Solicitation # UA-2026-11-07-000890-a

Military Unit A1619 is conducting a simplified procurement process for reverse osmosis water purification equipment consisting of two specific items. This solicitation, identified as UA-2026-11-07-000890-a, is being carried out in accordance with the Law of Ukraine on Public Procurement and the specific regulations for defense procurement during martial law as outlined in Cabinet of Ministers Resolution No. 1275. Potential suppliers must submit their responses by November 16, 2026. The customer emphasizes a strict requirement for the exact goods specified in the announcement and advises against bids that cannot meet these precise specifications. Delivery terms and deadlines are governed by the procurement announcement and the draft contract, with performance taking place within Ukraine as specified in the documentation.

Військова частина А1619

POSTED

DEADLINE

Chemical Feed Pump Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of three Chemical Feed Pumps, specifically model NSN 4320011824014, to support prime contractors under Defense Logistics Agency supply contracts. The project is managed by the DLA Weapons Support Maritime Supply Chain within the Department of Defense, with the place of performance located in Tracy, California. The contractor is required to adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the agreement mandates full compliance with FAR 52.204-24 concerning the use of telecommunications and video surveillance equipment. The final deliverable consists of three fully packaged and marked pumps.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Carbon Ring Seal SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the manufacture or sourcing of 49 carbon ring seals identified by NSN 4320-01-218907-4. The selected provider will supply these components to prime contractors on DLA supply contracts, with the place of performance located at Hill AFB. Strict adherence to military and industry standards is required for the fulfillment of this order. All items must be packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with RP001 DLA Packaging Requirements for Procurement. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Hydraulic Pumps (Critical Application)This subcontract involves the supply of two critical application hydraulic pumps, specifically Cemen Tech part number 5232-083-000, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to the DLA Master List quality standards and mandates that the provider pass NIST SP 800-171 cybersecurity assessments. All items must be packaged and marked in accordance with RP001, MIL-STD-2073-1E, and MIL-STD-129 specifications. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 333914, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services involves providing specialized preservation, packaging, and marking for prime contractors on DLA supply contracts. The scope of work focuses on protecting rotary pump units from corrosion using military-specification packaging materials and inhibitors, ensuring all processes strictly adhere to MIL-P-16789 and MIL-STD-2073 standards. The final deliverable is a fully preserved and packaged unit ready for FOB Destination shipment. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The solicitation was posted on November 9, 2026, with a response deadline set for December 7, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-STD-2073 Military Packaging and PalletizationThis subcontract involves providing specialized military packaging and palletization services for prime contractors supporting DLA Mechanicsburg supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1 and ASTM D3951-18 standards, utilizing cushioning and anti-corrosive wraps to ensure item protection. Additionally, all palletization must be performed using ISPM 15 certified heat-treated wood materials. The specific deliverable for this engagement is the secure packaging and palletization of eight shaft collars for FOB Origin shipment. This project falls under NAICS code 488410 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.

Motor Vehicle Towing

POSTED

about 5 hours ago

DEADLINE

MIL-STD-130 Identification MarkingThis subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves providing specialized identification marking and labeling services for prime contractors. The scope of work requires the application of unique identification marks and shipment labels in strict accordance with MIL-STD-130 and MIL-STD-129 standards. These markings must be executed using laser marking or dot peening techniques to ensure durability and compliance. The technical requirements include the implementation of Application Identifiers and Data Identifiers following ISO/IEC 15434 and ANSI MH 10.8.2 guidelines. The contractor is responsible for delivering machine-readable UID markings on eight specific units and containers. This opportunity falls under NAICS code 339999, with a response deadline set for February 12, 2027.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Precision Manufacture of Shaft Collars (NSN 3040-01-355-2803)This subcontract involves the precision manufacture of eight shaft collars under NSN 3040-01-355-2803 for prime contractors supporting DLA Mechanicsburg. The selected provider must utilize CNC lathes, mills, or precision grinding equipment to ensure all components strictly adhere to the dimensions and tolerances outlined in Technical Data Package version O06. The contractor is required to maintain detailed inspection records for a period of 365 days following the delivery of the finished goods. This effort falls under NAICS code 333613 and is managed by the Department of Defense.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPRMM126QMC92

This procurement, issued under SEPA-EAF Authority by DLA Mechanicsburg, is for the manufacture and supply of a shaft collar (NSN 3040-01-355-2803) in accordance with Technical Data Package version O06. The requirement has been amended to increase the quantity from one to eight units, with the offer due date extended to February 12, 2027. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer (LPTA), provided they take no exception to the solicitation terms. The contract mandates strict quality and identification standards, requiring higher-level inspection and marking in accordance with MIL-STD-130. Inspection and acceptance will occur at the origin (contractor's plant), and the contractor must maintain inspection records for 365 days post-delivery. Packaging must adhere to MIL-STD-2073-1 for military stock and ASTM D3951-18 for CONUS shipments, with specific requirements for palletization and wood packaging treatment per ISPM 15. All payment requests and receiving reports must be submitted electronically via Wide Area Workflow (WAWF). Delivery is required within 30 days, and the shipment terms are FOB Origin.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Electronic Component ProcurementThis subcontract, titled Electronic Component Procurement and managed by the Department of Defense through DLA Mechanicsburg, involves the supply of individual electronic components such as resistors, capacitors, and integrated circuits for prime contractors. The selected provider must source all components according to the Bill of Materials specified in TDP Version 001 and deliver them in either kitted or bulk formats. To ensure quality and security, the contractor is required to provide certificates of conformance to prevent the introduction of counterfeit parts. Additionally, all components must be handled and shipped in strict accordance with ANSI/ESD S20.20 standards. The solicitation was posted on November 6, 2026, with a response deadline of December 7, 2026, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Bare Printed Circuit Board (PCB) SupplyThis subcontract opportunity, issued by the Department of Defense through DLA Mechanicsburg, involves the supply of unpopulated, bare printed circuit boards for prime contractors under NIIN 017374655. The selected provider will be responsible for the etching, drilling, and plating of circuit board substrates in strict accordance with TDP Version 001. Qualified bidders must operate a specialized PCB fabrication facility and utilize military-grade electronics substrates and chemicals to ensure compliance with technical standards. The contract was posted on November 6, 2026, with a response deadline of December 7, 2026, falling under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Circuit Card Assembly ManufacturingThis subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves the manufacture and assembly of two complete circuit card assemblies for NIIN 017374655. The selected provider must fabricate and assemble the cards according to TDP Version 001, ensuring all units undergo proper physical identification and marking. Strict adherence to technical standards is required, including the implementation of ESD control programs within protected work areas compliant with ANSI/ESD S20.20. Additionally, the contractor must ensure full compliance with MIL-STD-130 REV N and MIL-STD-2073. The response deadline for this opportunity is December 7, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Mechanicsburg supply contracts within the Department of Defense. The scope of work involves providing specialized military-grade packaging and marking for two power supply units, ensuring they are fully preserved and prepared for shipment. The contractor is responsible for executing Level A and Level B packing for both domestic and OCONUS destinations, utilizing MIL-SPEC approved shipping containers and industrial labeling equipment. All services must strictly adhere to MIL-STD-2073-1 for packing and MIL-STD-129 for container markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for December 7, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacture of Power Supply Units (NSN 6130-01-607-7936)This subcontract involves the manufacture of two specialized power supply units under NSN 6130-01-607-7936 for prime contractors supporting DLA Mechanicsburg. The fabrication process must strictly adhere to Cage Code 06401 and reference number 60083582-000, with physical identification applied according to MIL-STD-130, REV N. The contractor is required to utilize professional electronics manufacturing and testing equipment to verify that power output meets the specifications outlined in TDP Version 002. This Department of Defense project falls under NAICS code 335931, with a response deadline set for December 7, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Custom Shipping Crate FabricationThis subcontract, titled Custom Shipping Crate Fabrication, involves the production of a custom shipping crate designed to protect sensitive electronic and composite components for prime contractors supporting DLA supply contracts. The fabrication must strictly adhere to Drawing 1890-20 and ensure all packaging meets the requirements of MIL-STD-2073. The project is managed under the Department of Defense through the SPRMM1 DLA Mechanicsburg agency and falls under NAICS code 321999. The solicitation was posted on November 6, 2026, with a response deadline of November 23, 2026. The final deliverable for this contract is one custom shipping crate built to the specified technical drawings.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Fluid Pressure Filter Parts Kits (NSN 4330-01-567-1857)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS