Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on January 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SAS01 Diesel Generator Room Safety Improvements

Closed
25-58264International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe contract seeks a contractor to deliver comprehensive design, permitting, and construction services for replacing the Checkpoint 5 security grill at the Port of Seattle. The scope encompasses a full lifecycle approach beginning with site assessment and continuing through the preparation of design drawings and specifications that comply with TSA CRPG Section 3-5 standards. The contractor must submit all documentation for regulatory review and secure necessary permits, followed by the safe removal and proper disposal of the existing grill. New system fabrication and installation are required, with seamless integration into existing structural, electrical, and security badge access systems. All work must be conducted with strict attention to operational continuity, minimizing disruption to airport security functions. Coordination with multiple stakeholders is mandatory to ensure compliance with federal, state, and local regulations while maintaining the integrity of the airport’s security posture. The procurement is classified under NAICS code 236220 for commercial and institutional building construction and is managed by the Aviation Project Management Group under the Port of Seattle. Primary contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the project manager. The opportunity was posted on July 26, 2026, and the contract is structured under a design-bid-build delivery method. All work must be performed at the port’s facility, with no specified set-aside provisions. Contractors are expected to engage proactively with project representatives to align on timeline, quality, and compliance requirements throughout all phases of the project.
Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

N/A
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the base building infrastructure of the Rental Car Facility Customer Service Building to support a new Concession Agreement and enable tenant construction commencing June 1, 2027. The scope includes updating wayfinding signage to reflect new tenant locations, constructing a new break room and flex space for transit operations, renovating existing restrooms in the Customer Service Building, replacing outdated car wash equipment in the Quick Turn Around areas, installing new expansion joints on the 5th Floor plaza areas, and performing structural repairs to address cracking and repair post-tensioned cables. These upgrades are designed to modernize facility functionality and ensure compliance with future operational demands under the upcoming concession arrangement. All work is centered on the Customer Service Building within the Rental Car Facility, with the Port of Seattle acting as the contracting authority. The solicitation is currently forecasted, with no formal solicitation number assigned yet, and the NAICS code 236220 indicates commercial and institutional building construction. Primary point of contact is Angela Peterson, with Julia Ruzon serving as Project Manager. Interested parties should monitor the official Port of Seattle portal for formal solicitation release, as this project represents a significant capital improvement initiative aimed at enhancing tenant experience and long-term facility integrity.
Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

N/A
NAICS: 236220
New
Federal
RFQ 19KU2026Q0013 - AEWA Door & Tile Installation Upgrade projectThe RFQ 19KU2026Q0013 seeks qualified contractors to perform the AEWA Door & Tile Installation Upgrade project at the U.S. Embassy in Kuwait under a fixed-price contract award, with selection based on the lowest technically acceptable bid. A mandatory site visit is scheduled for August 5, 2026, at 09:30 AM Kuwait time, and failure to conduct a thorough on-site assessment prior to submission renders the contractor fully responsible for any errors, omissions, or cost miscalculations in the proposal, including the Bill of Materials and Bill of Quantities. All quotations must be submitted electronically by August 16, 2026, at 10:00 AM Kuwait local time, with emails titled correctly to ensure proper processing. Proposals must include the completed SF-1442 form, pricing in Section A, all required representations and certifications in Section L, and supporting documentation from Attachment A and other applicable sections. Offerors must either hold an active SAM registration and provide their Unique Entity Identifier or, if not registered, complete FAR 52.204-90, with the requirement to update this annually if option periods are exercised. Questions must be submitted by August 8, 2026, at 10:00 AM Kuwait time; no inquiries will be accepted after this deadline. The project falls under NAICS code 236220 and is administered by the U.S. Department of State through the Embassy in Kuwait, with no set-aside provisions applied.
US Embassy Kuwait

POSTED

about 12 hours ago

DEADLINE

in 20 days
NAICS: 236220
New
Federal
Z2DA--FY27 NRM | 557-23-104 | Replace Boiler Plant Steam Boilers | Construction (VA-27-00003633)The Department of Veterans Affairs, through Network Contracting Office 07, is conducting market research for the replacement of three steam boilers at Building 27 of the Carl Vinson VA Medical Center in Dublin, Georgia. This project, classified under NAICS code 236220 with a magnitude between $20 million and $50 million, will require a contractor to manage and execute the full scope of construction work including hazardous material abatement, demolition of existing systems, installation of new boilers, piping, fuel tanks, emergency generators, and related site work—all in accordance with design drawings and specifications provided by an independent Architect-Engineer. The work must comply with all federal, state, and local regulations, and wage determinations for Laurens County, Georgia will apply. The project is anticipated to be awarded as a firm-fixed-price contract following a competitive process, either through an RFP under FAR Part 15 or an IFB under FAR Part 14, with the final procurement method to be determined after market research. The performance period is set at 730 days from the Notice to Proceed, and the contract is planned to be set aside exclusively for Service-Disabled Veteran Owned Small Businesses. Interested contractors must submit a capabilities statement no longer than four single-spaced pages in a single PDF under 4MB, including company details, UEI, size certification under NAICS 236220, bonding capacity sufficient for the project value, and evidence of past performance on at least three comparable medical facility construction projects completed within the last seven years. Submissions must include specific project names, owners, contact information, dollar values, start and completion dates, and a description of technical expertise and key personnel relevant to the scope. Responses must be emailed as a properly formatted PDF by August 7, 2026, at 3:00 PM EST to the designated VA contacts with the correct subject line reference. No bids or proposals are being solicited at this time; this is purely a market research effort, and respondents should not expect evaluation feedback, reimbursement, or a solicitation unless posted on SAM.gov in the first quarter of FY27. Hard copies and phone inquiries are not accepted, and compliance with submission guidelines is mandatory for consideration.
247-NETWORK Contract Office 7 (36C247)

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The contract involves architectural, mechanical, and electrical modifications to ensure code compliance in the diesel generator room located within Building 110 at the Council's Gymnasium Place in Saskatoon, under the National Research Council of Canada. The project is focused on safety improvements for the generator room and will require adherence to relevant codes and standards. All inquiries related to the contract should initially be directed to Andrew Jefferson until January 30, 2026, after which Collin Long will become the primary point of contact. The solicitation, titled "SAS01 Diesel Generator Room Safety Improvements," was posted on January 22, 2026, with a response deadline of February 12, 2026. This opportunity is issued by a federal government agency, specifically the National Research Council of Canada. The work is to be performed in Saskatchewan, Canada. The contracting process and related information are accessible through the CanadaBuys portal.

General Info

Architectural, mechanical, electrical upgrades for diesel generator room safety at NRC Saskatoon, deadline February 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Canada, Saskatchewan, CAN

Set-Aside

NONE

Documents

(7)

NPP 25-58264 SAS01 Diesel Generator Room Safety Improvements

PDF2 pagespresolicitation

25-58264 Amélioration de la sécurité dans la salle du générateur diesel SAS01

PDF2 pagesitb

RFP 25-58264 SAS01 Diesel Generator Room Safety Improvements

PDF178 pagesrfp

RFP 25-58264 Amélioration de la sécurité dans la salle du générateur diesel SAS01

PDF192 pagesrfp

25-58264 - Addendum No. 1.pdf

PDF

25-58264 Generator Room Compliance Drawings

PDF13 pagesdrawings

Conformité de la Salle des Génératrices du CNRC - Élévation Intérieure

PDF13 pagesspecifications

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
Contacts
Andrew JeffersonContracting Authority

Full Description

Show more
Work under this contract covers the architectural, mechanical, and electrical modifications required for code compliance in the generator room in the Council's Building 110 Gymnasium Place, Saskatoon of the National Research Council. Please direct your inquiries to Andrew Jefferson at andrew.jefferson@nrc-cnrc.gc.ca, and cc Collin Long, until January 30, 2026. After this date, please send all inquiries directly to Collin Long.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 541512
New
International
Technical Architecture and Systems Design – Level 3The contract seeks a Level 3 technical architecture and systems design partner to support the Mercury Program migration efforts by delivering detailed technical architecture designs, comprehensive system integration planning, and a forward-looking technology roadmap. The work requires expertise in aligning complex system components, ensuring seamless interoperability, and defining scalable infrastructure strategies to transition legacy systems to modernized platforms. The contractor will be expected to provide actionable insights and structured planning that guide the program’s long-term technological evolution, with a focus on stability, security, and future-readiness. The opportunity is classified as a subcontract under NAICS code 541512, issued by the National Research Council of Canada on behalf of the Government of Canada, with performance required within the National Capital Region. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 12, 2026. While no set-aside provisions or specific eligibility criteria are outlined, the nature of the work implies a need for proven experience in federal migration projects, cloud-native systems, and enterprise architecture frameworks. Potential bidders should note the absence of a designated point of contact and should rely on the official Canadian Buys portal for full submission details.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 449110
New
International
FurnitureThis procurement under solicitation number 25-58244 B is issued by the National Research Council of Canada for the purchase, delivery, and installation of office furniture at Building M-38, 1200 Montreal Road, Ottawa, Ontario, with a required delivery and installation date of October 2, 2026. The requirement is solicited exclusively through the PWGSC Furniture for Workspaces Supply Arrangement (SA) # E60PQ-140003/D or E60PQ-140003/PQ, limiting participation to pre-qualified supply arrangement holders. The scope encompasses Product Categories 1 through 6, including work station systems, work surfaces, filing and storage products, ancillary items such as monitor arms, power modules, and cable troughs, and collaborative products including meeting and collaborative tables, with specific quantities outlined for each line item. All products must conform to the mandatory technical specifications in Annex A and comply with the ANSI/BIFMA e3 Furniture Sustainability Standard at minimum Level 2, alongside the Government of Canada Workplace Fit-up Standards. Offerors must submit fully completed technical and financial offers in separate electronic attachments, restricted to a maximum size of 10MB, with no zip files, links, or paper submissions permitted. Financial information must be contained solely within the financial offer; inclusion of pricing in the technical submission results in disqualification. Two mandatory pass/fail gates require submission of detailed drawings and specifications for NRC verification against Annex A and confirmation of the ability to meet the October 2, 2026, delivery deadline. Offers are evaluated on the lowest price basis, with contract awards made on a per-category basis. Security requirements governed by the attached Security Requirements Checklist (SRC) apply, and contractors must comply with site-specific health and safety plans. Offerors must certify ongoing compliance with all qualification certifications under the SA, including integrity provisions, employment equity, product conformance, and price certification per Part 6B of the SA. Failure to truthfully complete certifications or provide requested verification may result in an offer being deemed non-responsive or contract default. All communications must be directed to the designated contracting authority, and inquiries must be submitted at least three business days prior to the closing deadline of July 22, 2026. Invoices must be sent via email to the designated NRC invoice address, and payment may be processed by credit card if the supplier’s SA permits it. The requirement is
Furniture Retailers

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and CopperThe National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system specifically designed to reliably cut aluminum and copper for battery prototype components, under solicitation number 26-58021. The system must feature a fiber-type laser with a minimum power rating of 3000W and a 10:1 operational turn-down ratio, capable of cutting 0.16-inch aluminum and 1/8-inch copper at a minimum speed of 1 meter per minute. The work area must range between 400x300mm and 635x635mm, with a Z-axis of at least 50mm and positioning precision of 0.1mm or better. Key system requirements include an auto-tracking laser head, fully enclosed operation area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system to manage back-reflected laser energy. The contract encompasses delivery, installation, commissioning, and training, with all components to be delivered to the NRC Building U91 at 2320 Lester Road, Ottawa, Ontario. Offers must comply with Incoterms® 2020 Delivery at Place (Vancouver, BC) and include all shipping, customs, and duty costs. The acquisition is restricted to Canadian suppliers under the Policy on Reciprocal Procurement and subject to multiple free trade agreements. Submission of proposals is strictly electronic, with offers divided into three separate email attachments labeled Technical Offer, Financial Offer, and Forms—including the Offer Submission Form and Offeror Declaration Form—each not exceeding 10MB total and with no compressed files or external links permitted. Offers must be received by 2 PM EDT on July 27, 2026, and signed by an authorized representative. Mandatory technical criteria, identified with the terms “must” or “mandatory,” are detailed in Annex F and form a pass/fail gate; only offerors meeting all such criteria will be invited to submit sample cuts for verification. Financial offers must adhere to the Basis of Payment outlined in Annex D and clearly separate applicable taxes. Payment terms specify a 30-day period for undisputed invoices, with a 15% withholding for non-resident contractors unless waived by the Canada Revenue Agency. The Contractor must establish an accounting system allowing Canada to identify contract records and must provide all invoices to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca with full expenditure details, contract number,
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
International
26-58113 Universal Testing Machine with non-contact Extensometer for polymer researchThe National Research Council of Canada is seeking a Universal Testing Machine equipped with a non-contact extensometer for polymer research through a selective procurement process set aside exclusively for Indigenous suppliers under the federal Procurement Strategy for Indigenous Business. The equipment must meet ASTM and ISO standards for measuring tensile and flexural properties of polymer films, sheets, composites, and molded products. Delivery, installation, commissioning, and training must be completed by the end of February 2027 at the NRC’s facility in Winnipeg, Manitoba. Only invited Indigenous businesses are eligible to bid, and selection will be based on compliance with mandatory technical criteria and the lowest aggregate price. All bids must be submitted electronically to the designated NRC address by 2 PM EDT on August 7, 2026, and may be in either official language of Canada. The contract is governed by the Government of Canada’s Integrity Regime and tied to the GSIN N6640 under UNSPSC 41100000 for laboratory equipment. The procurement is accessible only through the Government Electronic Tendering Service, and amendments or responses to inquiries will be communicated directly to invited bidders only; no third-party notifications are guaranteed. The National Research Council emphasizes strict adherence to the set-aside provisions and requires bidders to be registered in the Indigenous Business Directory to qualify for consideration. The contract will be awarded to the single lowest-priced compliant Indigenous bidder, with no exceptions. Melody Ellis, Team Leader of Procurement and Contracting Services, serves as the primary point of contact for all inquiries and must be engaged directly for procedural clarification. Bidders are reminded that Canada assumes no liability for information sourced from external websites or for oversight resulting from reliance on third-party notification services.
Analytical Laboratory Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 423410
New
International
Two (2) Highspeed (15000 fps) CamerasThe National Research Council of Canada is seeking to procure two high-speed cameras capable of recording at 15,000 frames per second through Solicitation 26-58112, with delivery required in Ottawa, Ontario. This procurement is restricted exclusively to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for Laboratory and Scientific Equipment, Parts and Accessories, Services and Supplies, and only those suppliers have been invited to submit bids. The solicitation follows a selective tendering process under a competitive procurement strategy that awards the contract to the lowest compliant bid. The notice is published on the Government Electronic Tendering Service for 40 calendar days, with responses due by August 10, 2026, and all bids must comply with a range of international trade agreements including CETA, CPTPP, WTO-AGP, and several bilateral free trade agreements to which Canada is a party. Suppliers not holding the specified supply arrangement are ineligible, and any submissions from non-qualified vendors will not be considered. The award will be made to the responsive bidder with the lowest aggregate price who meets all mandatory technical requirements. Interested parties who are not yet qualified may apply to join Supply Arrangement E60PV-19EQUI by downloading the solicitation document from CanadaBuys and submitting a proposal in accordance with its requirements. All inquiries and submissions should be directed to Helen Tran, Senior Procurement Officer at the National Research Council.
Photographic Equipment and Supplies Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 334513
New
International
26-58075 Radio Frequency (RF) Test and Measurement SuiteThe National Research Council of Canada is seeking a fully integrated Radio Frequency (RF) Test and Measurement Suite comprising a signal generator capable of producing signals from 10 kHz to 50 GHz with an integrated frequency multiplier capable of extending output to 110–170 GHz, a signal/spectrum analyzer with a measurement range up to 50 GHz, and a vector network analyzer operating up to 44 GHz. The system must function as a unified solution with centralized control and be designed for high-precision applications in quantum metrology, where phase noise, harmonic distortion, and long-term frequency stability are critical to accurate sensor operation. The signal generator must accept external 10 MHz or 100 MHz references for enhanced stability, and the multiplier must be seamlessly controllable through the same interface as the generator. The spectrum analyzer must accurately characterize signal strength, harmonics, and spurious emissions, while the vector network analyzer must measure both magnitude and phase of RF components across temperature conditions, including cryogenic environments. All equipment must comply with mandatory technical specifications covering frequency range, phase noise, harmonic levels, phase stability, and multiplier functionality, with full compliance required to be considered for award. The solicitation follows a Lowest Price Technically Acceptable (LPTA) procurement strategy, where only offers meeting all mandatory technical criteria are evaluated, and the award will be granted to the lowest-priced compliant proposal. Proposals must be submitted electronically by August 14th, 2026, at 2:00 PM EDT, as two separate, unzipped files labeled “Technical Offer” and “Financial Offer,” with a combined size not exceeding 10 MB. Delivery of the completed suite is due by January 15th, 2027, at the NRC facility in Ottawa, under Incoterms® 2020 DAP terms, with full documentation—including operating procedures, remote command sets, troubleshooting guides, and technical specifications—required in both PDF and hard copy. The contract includes an irrevocable option for additional goods or services under the same terms, and contractors must comply with Canadian reciprocal procurement rules, anti-forced labor policies, international sanctions, and the Federal Contractors Program for Employment Equity. Environmental standards mandate reusable, recyclable, or returnable packaging, and all submissions are subject to review and final acceptance by the Government of Canada. Proposals must also include completed certifications affirming integrity, eligibility, and compliance with all contractual conditions, and only Canadian suppliers or those
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

4 days ago

DEADLINE

in 19 days
View Details