This Government Contract opportunity from Department Of Homeland Security was posted on January 31, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SCHEDULED DRY-DOCK USCGC MAPLE (WLB-207) FY14

Awarded

HSCG85-14-Q-P45021Federal

Submission Closed01/30/2014, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration on a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a full fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two hour sea trial to validate performance and safety protocols. The selected contractor must be a Honda Marine Authorized Dealer or Service Center and provide a secure facility for vessel storage. Proposals are due by November 13, 2026, and will be evaluated based on a 100 point scale with significant preference given to Colville and other Indian Business Enterprises. Award criteria prioritize reliability and effectiveness over the lowest cost. Contractual requirements include a performance bond for awards exceeding 100,000 dollars or a 25 percent retainage, comprehensive liability and workers compensation insurance, and consent to the jurisdiction of the Colville Tribal Court. Payments are subject to the tribal appropriation process and the availability of funds in the tribal treasury.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Marine Windshield Wiper Blade Supply

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Fabrication of Watercraft Floor Panel Sections

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Fabrication of Marine Structural Metal DoorsThis subcontract opportunity involves the precision fabrication and welding of two marine structural metal doors for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The work must adhere to the specifications of NSN 2040-01-678-1971 and the DLA Master List of Technical and Quality Requirements RA001. All finished products must be marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The project is a total small business set-aside under NAICS code 336611, with performance located in New Cumberland. Qualified bidders must provide a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SWITCHBOARD, ALARM, SHIP

Solicitation # SPE4A6-27-T-7280

Solicitation SPE4A6-27-T-7280, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of one shipboard alarm switchboard, identified by NSN 6320-01-180-9908 and Dynalec Corp part number 004186-001. The requirement is categorized under NAICS code 336611. Delivery is required within 20 days after order, with an original required delivery date of October 9, 2026. The items are to be delivered FOB Origin to a freight shipping address in Ginowan, Okinawa, Japan, with the bulk break point located at Camp Kinser. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. A critical safety requirement prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking, with limited exceptions for functional components specified by NAVSEA. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The procurement is a candidate for automated award, and offers utilizing additive manufacturing are ineligible. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BLADE SET, WINDSHIELD W

Solicitation # SPE7M4-27-T-2240

Solicitation SPE7M4-27-T-2240 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 189 marine windshield wiper blade sets, identified by NSN 2090016924274. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of September 19, 2027, and a lead time of 306 days after the date of order. Offers must be submitted based on FOB Origin, and the government will perform inspection and acceptance at the destination per FAR 52.246-2. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001 for palletization. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals and restricting the use of mercury and hexavalent chromium. Invoicing must be processed electronically through the Wide Area WorkFlow system. The contract also incorporates various DFARS clauses regarding cybersecurity, the Buy American Act, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

ASCB System and Vessel Inspection & MaintenanceThe ASCB System and Vessel Inspection and Maintenance subcontract involves providing routine sustainment, quarterly inspections, and minor repairs for prime contractors supporting Navy Region Mid-Atlantic projects. The scope of work includes maintaining barrier systems, cleaning A/C simplex strainers, lubricating hatch covers, and inspecting engine belts in accordance with manufacturer technical manuals. Additionally, the contractor is responsible for the towing and control of PSB strings during refurbishment processes. Managed under the Department of Defense via the Navsup Fleet Logistics Center Norfolk, this requirement demands high technical proficiency in marine diesel engines. The successful contractor must deliver functional systems and detailed quarterly inspection reports. The performance of these services is centered in the 23511 zip code area, with a response deadline set for November 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Shipboard Structural and Hull RepairThis subcontract for Shipboard Structural and Hull Repair supports Navsea HQ MMSC projects by providing critical corrective repairs for prime contractors. The scope of work includes executing unplanned emergent repairs identified during inspections or operations, as well as performing industrial tasks defined in Technical Instructions. All work must be completed using shipyard industrial tools in strict adherence to NAVSEA Standard Items to ensure repaired ship systems and components meet all required specifications. The project is managed under the Department of Defense for Navsea HQ and will be performed at the Washington Navy Yard. Classified under NAICS code 336611, the opportunity was posted on November 4, 2026, with a response deadline of January 11, 2027.

POSTED

DEADLINE

Portable Light Tower Rental and Field SupportThis small business set-aside subcontract involves the rental and field support of diesel-powered portable light towers for prime contractors at the Portsmouth Naval Shipyard. The required equipment must be towable units featuring 4,000W output, adjustable masts between 20 and 30 feet, and integrated forklift pockets. The contractor is responsible for delivering operational towers along with necessary manuals and ensuring all padeyes have the required lifting and handling certifications. Operational support includes on-site technical assistance with a strict 24-hour response time and a 48-hour window for completing repairs. Due to the nature of the work location, all personnel must hold US Citizenship to gain access to the shipyard. This opportunity is categorized under NAICS code 336611 and is managed under the Department of Defense.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

Vessel Preventive and Corrective MaintenanceThis subcontract, titled Vessel Preventive and Corrective Maintenance, supports prime contractors on SWFLANT projects at Naval Submarine Base Kings Bay for the Department of Defense. The primary objective is to ensure 100% operational availability of the marine fleet through the execution of preventive and corrective maintenance, casualty response, and repairs. Technical scope includes work on diesel propulsion systems, outboard engines, and deck machinery, requiring the use of specialized marine engine diagnostic tools and welding and fabrication equipment. To qualify for this engagement, personnel must hold marine mechanic certifications to deliver a fleet maintained with zero unexcused delays. The work is categorized under NAICS code 336611 and is performed at location 31547. The contract is managed under the Strategic Weapons Facility Lant Financia.

Strategic Weapons Facility Lant Financia

POSTED

DEADLINE

HTFW PUMP Parts for STBD 1

Solicitation # N0040627Q0019

Naval Supply Systems Fleet Logistics Center Puget Sound, acting on behalf of Military Sealift Command, is soliciting the procurement of critical pump parts for the MIGUEL KEITH (ESB-5) under solicitation N0040627Q0019. The requirement consists of four ball bearings (PN 204-11-629), three mechanical seals (PN 231-31-1770), and two casing rings (PN 15489-16-27). This is a firm fixed price procurement being sole sourced to ECI Defense Group, the authorized distributor for the original equipment manufacturer, Buffalo Pumps dba Air and Liquid Systems Corporation. The parts are designated as critical safety items, and the use of non-qualified sources could void equipment warranties. The government will evaluate offers based on technical specifications, including the delivery date, past performance, and price. The contractor must adhere to strict packaging and marking standards, including MIL-STD 129R for external markings and ISPM 15 for wood crating. Additionally, the mechanical seals and casing rings require DoD unique identification per DFARS 252.211-7003. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is categorized under NAICS code 336611, with an anticipated award date in November 2026.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Maintenance, Repair, and Preservation of Edgecumbe Barge

Solicitation # N4523A26Q1006

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a stand-alone Firm-Fixed-Price contract under NAICS 336611 for the maintenance, repair, and preservation of one Edgecumbe RCD Barge. The vessel is a 48-year-old steel barge measuring 240 feet in length and 60 feet in width. To ensure proper government oversight, the contractor's facility must be located within the Puget Sound, Washington region, specifically between Olympia and Bellingham. The period of performance is scheduled from December 15, 2026, to February 19, 2027, with a quote submission deadline of November 13, 2026. The scope of work includes transporting the vessel from the Bremerton facility to the contractor's site for docking, washing, and cleaning. Key technical requirements involve zinc anode replacement, air testing and cleaning of tanks and voids, and supporting ABS and USCG inspections. The contractor is responsible for comprehensive repairs to the hull, structures, main deck, superstructure, and various mechanical, electrical, and piping systems. All work must adhere to the highest commercial marine quality standards, with specific requirements for surface preparation, curing, and the use of corrosion-resistant steel for label plates. Contractors must possess a valid NAVSEA MSRA or ABR and a Government Property Management System Plan. Safety and technical compliance are paramount, requiring AWS and ABS certified welders, a documented Heavy Weather Plan submitted 15 days prior to start, and strict adherence to OSHA gas-free certifications for hot work. The contractor is solely responsible for the Inspection and Quality Control System and must provide all necessary insurance bonds for the transport and housing of the vessel. Final delivery of the barge back to the Puget Sound Naval Shipyard must be coordinated with the Contracting Officer's Representative.

Puget Sound Naval Shipyard IMF

POSTED

1 day ago

DEADLINE

in 8 days

AI Contract Overview

The United States Coast Guard Surface Forces Logistics Center issued a total small business set-aside request for quote for dry-dock repairs and overhauling of the USCGC MAPLE (WLB-207). Conducted under FAR Part 12 and FAR Subpart 13.5, the procurement utilized NAICS code 336611 and was evaluated based on price and past performance. The performance period was scheduled from March 12, 2014, through May 21, 2014, with a strict geographical restriction requiring work to be completed in Washington, Oregon, or California to ensure weather conditions suitable for critical surface preservation. The scope of work encompasses comprehensive maintenance, including hull plating inspection and ultrasonic testing, propulsion shaft and seal overhaul, controllable pitch propeller maintenance, and the cleaning and preservation of various tanks, voids, and exterior surfaces. Additional requirements include the overhaul of sea valves, thruster units, and hydraulic steering coolers, as well as the provision of temporary messing and berthing. All welding and brazing must be performed by certified personnel. The acquisition process included multiple amendments to clarify technical specifications regarding engine alignment, surface preparation, and government furnished materials.

General Info

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Contract Value

$3,374,745.2

NAICS

336611 - Ship Building and Repairing

Place of Performance

CA, USA

Set-Aside

NONE

Awardee

LAKE UNION DRYDOCK COMPANY

Award Issued Date

01/24/2014, 12:00:00 AM UTC

Documents

amendment

High

amendment

High

amendment

High

amendment

High

sow

High

other

Low

other

Low

52 pages · special-notice

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseAwarded

PostedNov 14

Presolicitation

Notice updatedNov 18

The notice description changed.

Notice updatedNov 18

Response deadline changed from Dec 17, 2013 to Dec 18, 2013. The notice description changed.

Notice updatedNov 27

The notice description changed.

Notice updatedDec 3

Notice details unchanged. Attachments may have changed.

Notice updatedDec 6

Notice details unchanged. Attachments may have changed.

Type ChangedDec 13

Presolicitation → Solicitation

AwardedJan 24

Contract was awarded

Submission Closed

01/30/2014, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Jack RodmanContract Specialist

contact@example.gov

+1 (555) 000-0000

Jay S McReynoldsContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

The United States coast guard surface forces Logistics Center, Contracting and Procurement branch 2 IBCT Product Line intends to issue a Commercial Request for Quote for Dry-Dock Repairs for the United States Coast Guard Cutter: MAPLE (WLB-207) . The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1000 employees. The simplified acquisition will be issued as a Best Value for Quote (RFQ) on or about November 18, 2013. The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A TOTAL SMALL BUSINESS SET-ASIDE. The performance period will be based following Cutter's Availability dates and completion time: USCGC MAPLE (WLB-207) will be available from March 12, 2014 through May 21, 2014 (71) seventy-one days after vessel becomes available. PLACE OF PERFORMANCE: The place of performance will be at the Contractor's Dry-dock DESCRIPTION OF WORK The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC MAPLE (WLB-207). This work will include, but is not limited to: PRICING SCHEDULE FOR: USCGC MAPLE (WLB-225B) DRYDOCK AVAILABILITY FY2014 ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE D-001 Hull Plating (U/W Body), Inspect JOB 1 D-002 Hull Plating (U/W Body), Ultrasonic Testing JOB 1 D-003 Appendages (U/W), Leak Test JOB 1 D-004 Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair JOB 1 D-005 Appendages (U/W) - Internal, Preserve JOB 1 D-006 Voids (Non-Accessible), Leak Test JOB 1 D-007 Voids (Non-Accessible), Preserve Internal Surfaces JOB 1 D-008 Propulsion Shafting Remove, Inspect, and Reinstall JOB 1 D-009 Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renewal JOB 1 D-010 Various Bulkhead Seals, Overhaul JOB 1 O-011 Propulsion Tail Shaft Sleeve, Skim Cut JOB 1 O-012 Propulsion Shaft Bearing, Stave Renewal JOB 1 D-013 Controllable Pitch Propeller, System Maintenance JOB 1 D-014 Controllable Pitch Propeller, Hub General Maintenance JOB 1 D-015 Controllable Pitch Propellers, Clean and Inspect JOB 1 D-016 Controllable Pitch Propeller Hub, Remove and Reinstall JOB 1 D-017 Fathometer Transducer, General Maintenance JOB 1 D-018 Fwd Scan Sonar Transducer, General Maintenance JOB 1 D-019 Vent Ducts (Galley and Pantry Room All), Commercial Cleaning JOB 1 D-020 Vent Ducts (Laundry Exhaust), Commercial Cleaning JOB 1 D-021 Sea Valves and Waster Pieces, Overhaul or Renew JOB 1 D-022 Sea Strainers - Duplex (All Sizes), Overhaul JOB 1 D-023 Sea Bay, Clean and Inspect JOB 1 D-024 Sea Bay, Preserve 100% JOB 1 D-025 Rudder and Rudder Stock, Removal and Inspection JOB 1 D-026 Thruster Units (General), Overhaul JOB 1 D-027 Boat Boom, Level 2 Inspect and Repair JOB 1 D-028 Single Point Davit - Slewing Arm, Level 2 Inspect and Repair JOB 1 D-029 Buoy and Cargo Handling Crane Wire Rope, Renew JOB 1 D-030 Sewage Holding Tanks, Clean and Inspect JOB 1 D-031 Sewage Vacuum Collection Tanks, Clean and Inspect JOB 1 O-032 Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) JOB 1 D-033 U/W Body, Preserve (100%) JOB 1 O-034 Hull Plating Freeboard, Preserve -"100%" JOB 1 O-035 Hull Plating Freeboard, Preserve - Partial JOB 1 O-036 Superstructure, Preserve "Partial" JOB 1 D-037 Cathodic Protection / Zinc Anodes, Renew JOB 1 D-038 Impressed Current Cathodic Protection System, Inspect and Maintain JOB 1 D-039 Impressed Current Cathodic Protection System Reference Cells, Renew JOB 1 D-040 Drydocking JOB 1 D-041 Temporary Services, Provide JOB 1 D-042 Temporary Messing and Berthing, Provide JOB 1 D-043 Sea Trial Performance, Provide Support JOB 1 D-044 Firemain Valves, Overhaul or Renew JOB 1 O-045 Bilges (Machinery Space) - MMR, Preserve JOB 1 O-046 Hydraulic Steering Cooler, Install JOB 1 D-047 Deck Covering (Electrical Matting), Renew JOB 1 D-048 SW Heat Exchangers; Clean, Inspect and Hydro JOB 1 D-049 Molded Case Circuit Breakers, Inspect & Test JOB 1 D-050 Insulated Case Circuit Breakers, Inspect, Maintain & Test JOB 1 D-051 Power Circuit Breakers, Inspect, Maintain & Test JOB 1 O-052 Hatch (Internal), Renew JOB 1 D-053 Cargo Hatch (Hydraulic), Overhaul and Repair JOB 1 D-054 Plate Type Heat Exchanger, Clean and Inspect JOB 1 D-055 Grey Water Holding Tank, Clean and Inspect JOB 1 D-056 Tanks (Ballast), Preserve 100% JOB 1 O-057 Tanks (Grey Water Holding), Preserve 100% JOB 1 O-058 Tanks (Grey Water Holding), Preserve Partial JOB 1 O-059 Tanks (Sewage Holding), Preserve 100% JOB 1 O-060 Tanks (Sewage Holding), Preserve Partial JOB 1 D-061 Stern Tube Interior Surfaces, Preserve 100% JOB 1 D-062 Impressed Current Cathodic Protection System Anodes, Renew JOB 1 D-063 Impressed Current Cathodic Protection System Dielectric Shield, Renew JOB 1 D-064 Fuel Oil Valves, Renew JOB 1 O-065 Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) JOB 1 D-066 Main Diesel Engine, Alignment Check JOB 1 D-067 Sewage Atmosperic Tank, Repair JOB 1 D-068 Sewage Vacuum Piping, Renew JOB 1 D-069 Tanks (MP Fuel Service), Clean and Inspect JOB 1 D-070 Sewage Piping, Clean and Flush JOB 1 O-071 Additional SCBA Gear, Install JOB 1 O-00A Composite Labor Rate Hour 1860 D-00B GFP Report NSP EA NSP O-00Z Laydays Day 5 The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties. Potential contractors are strongly encouraged to make a Ship Check. For access please CWO David Spence at (907) 966-5470email: contact@example.gov or CWO John Brummett at +1 (555) 000-0000, Mobile: contact@example.gov Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at +1 (555) 000-0000 or email: contact@example.gov CERTIFICATIONS: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. GEOGRAPHIC RESTRICTION: 1. THE ONE TIME GEOGRAPHICAL RESTRICTION AND WILL PROCEED TO SOLICIT MAPLES FY14 DRYDOCK FOR COMPLETION IN WASHINGTON, OREGON OR CALIFORNIA. 2. ANNUAL HISTORICAL ALASKA WEATHER DATA FROM MARCH TO MAY DOES NOT MEET REQUIREMENTS FOR PROPER PRESERVATION OF CRITICAL COATED SURFACES. IBCT CONCURS THAT PRESERVATION MUST BE COMPLETED IN THE LOWER 48 TO ACHIEVE BETTER WEATHER WINDOWS TO KEEP THE PROJECT ON SCHEDULE. (Ref: MESSAGE R 141633Z NOV 13)