The United States coast guard surface forces Logistics Center, Contracting and Procurement branch 2 IBCT Product Line intends to issue a Commercial Request for Quote for Dry-Dock Repairs for the United States Coast Guard Cutter: CAPSTAN (WYTL-65601) . The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1000 employees. The simplified acquisition will be issued as a Best Value for Quote (RFQ) on or about January 4, 2012. The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A FULL AND OPEN COMPETITION The performance period will be based following Cutter's Availability dates and completion time: USCGC CAPSTAN (WYTL-65601) will be available from April 12, 2012 through May 23, 2012 (43) Forty-three days after vessel becomes available. PLACE OF PERFORMANCE: The place of performance will be at the contractor's facility. The Geographic Restriction for the Cutter is 300 nautical miles one-way, 600 nautical miles round-trip. DESCRIPTION OF WORK The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC VISE (WLIC-75305) & USCG 68A BARGE (68012). This work will include, but is not limited to: PRICING SCHEDULE FOR: USCGC CAPSTAN (WYTL-65A) DRYDOCK AVAILABILITY 2012 ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE D-001 Hull Plating (U/W Body), Ultrasonic Testing JOB 1 D-002 Appendages (U/W) - Internal, Preserve JOB 1 D-003 Propeller , Remove, Inspect, and Reinstall JOB 1 D-004 Propeller, Perform Minor Repairs and Reconditioning JOB 1 D-005 Keel Coolers , Clean , Inspect and Hydro JOB 1 D-006 Fathometer Transducer , Renew JOB 1 D-007 Vent Duct s ( Engine and Motor Room All ) , Commercial JOB 1 D-008 Sea Strainers (All Sizes), Overhaul and Renewal JOB 1 D-009 Rudder Assembly, Remove, Inspect and Reinstall JOB 1 D-010 Boat Davit, Inspect and Repair (Level 2 ) JOB 1 D-011 U/W Body, Preserve "100%" JOB 1 D-012 Hull Plating Freeboard, Preserve " 100% " JOB 1 D-013 Cathodic Protection / Zincs, Renew JOB 1 D-014 Drydocking JOB 1 D-015 Temporary Services, Provide JOB 1 D-016 Deleated, Not Used JOB 1 D-017 Auxiliary Retention Grey Water/Sewage Tank System , Install New JOB 1 D-018 Fan Coil Unit, General Maintenance JOB 1 D-019 Hull and Structural Plating - 3/16" Steel , Repair JOB 25 D-020 Hull and Structural Plating - " Steel Plate , Repair JOB 25 D-021 Hull and Structural Plating - 3/8 " Steel Plate , Repair JOB 25 D-022 Hull and Structural Plating Eroded Weld (Steel), Repair JOB 25 D-023 Appendages (U/W), Leak Test JOB 1 D-024 Propulsion Shafting ; Remove, Inspect, and Reinstall JOB 1 D-025 Propulsion Shafti ng , Straighten JOB 1 D-026 Lazarette (Bulkhead and Overhead Surfaces) , PRESERVE JOB 1 D-027 Main Hold (Bulkhead and Overhead Surfaces) , PRESERVE JOB 1 D-028 Sewage Void Plating Renewal JOB 1 D-029 Bridge Sheating Renewal JOB 1 D-030 OINC Stateroom (Bulkhead and Overhead Surfaces) , Abate Lead Coatings JOB 1 O-00A Composite Labor Rate Hour 170 D-00B GFP Report NSP EA NSP O-00Z Laydays Day 5 Total Price of Definite Items Total Price of Option Items Total Price of Definite and Optional Items The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties. Potential contractors are encouraged to make a Ship Check. For access please contact MK1 Adam Smoot at,
+1 (555) 000-0000 email:
contact@example.gov or LT Beth Sarigianis at
+1 (555) 000-0000 email:
contact@example.gov Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at
+1 (555) 000-0000 or email:
contact@example.gov. CUTTER CLEARANCES: Minimum Water Depth: 8 feet Minimum Height Clearance: 30 feet. CERTIFICATIONS: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Contractors shall provide a current certification of its drydocking facility as required by the specification, Work Items D-014 Routine Drydocking for tender and barge SFLC Standard Specification 8634. When requested by the Contracting Officer, the Contractor shall also provide the pre-award calculations described in specification Work Items D-014, Routine Drydocking, Cutter Conditions, and Appendix A, B or C of the SFLC Standard Specification 8634. Subsequent to contract award, the Government will require the Contractor to provide the docking and un-docking calculations described in Appendix A, B or C of the SFLC Standard Specification 8634. For further information or questions regarding this solicitation, please contact Jack Rodman at
+1 (555) 000-0000 or via email:
contact@example.gov
