Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Scissor lift

Awarded
W911S226U3296Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120
New
SLED
Portable Asphalt Recycling Machine for TxDOT Waco District
Solicitation # 601310000102818
The Texas Department of Transportation is soliciting bids for the procurement of one Portable Asphalt Recycling Machine for the Waco District. The required equipment must feature a Cummins Tier 4 Final diesel engine rated at 260 horsepower, a maximum cutting width of 48 inches, and a maximum cutting depth of 12 inches. In addition to the primary machine, the solicitation includes several mandatory bid options: a Piranha Top-Hatch Adjustable Breaker Bar, Accu-Trak Wheel Assist with Power Steering, a custom Wheel Assist Trailer with a 3-inch pintle hitch, and a WA150 Wheel Assist Mount Water Supply System. The successful vendor must provide a minimum of four hours of operator and maintenance training upon delivery, along with a complete set of manufacturer manuals. Eligible respondents must be authorized dealers who have been engaged in manufacturing or supplying portable asphalt recycling machines for at least three of the last five years. Bids must be submitted via the Euna Procurement portal by November 13, 2026, at 3:00 p.m. Central Time. The evaluation process is a two-stage best-value determination; vendors must first pass a documentation review and maintain a CPA Vendor Performance rating of A, B, or C before being evaluated on purchase price, technical compliance, delivery timeframes, warranties, and the risk of non-performance. All goods must be shipped FOB Destination to Waco, Texas, in first-class condition and must meet all applicable Federal and State of Texas safety and noise regulations.
Texas Department of Transportation

POSTED

5 days ago

DEADLINE

in 16 days

AI Contract Overview

Show more

The contract is for an Electric Slab Scissor Lift powered by a 24V DC system, engineered for narrow indoor and outdoor operations with a 32-inch width and zero emissions, ensuring suitability for sensitive environments. It achieves a maximum working height of 37 ft 7 in and a platform height of 31 ft 7 in, with a lowered height of 51 inches and a stowed height ranging from 79.5 to 94 inches depending on rail position. The platform measures 83 inches by 27.5 inches and includes a 3-foot roll-out extension deck, enabling versatile access. The unit supports a total load capacity of 550 pounds, divided between a 300-pound main platform and a 250-pound extension deck, accommodating up to two personnel. It weighs 5,850 pounds and features a 25% gradeability, a 43-inch inside turning radius, and a 104-inch outside radius. The machine operates at 2.0 mph when stowed and 0.5 mph when raised, with lift and lower cycles completing in 55–60 seconds and 47–55 seconds respectively. Equipped with solid non-marking tires, it maintains ground clearance of 4 inches and a 69-inch wheelbase. The lift incorporates advanced safety and control systems, including a variable speed electric drive, dual holding brakes, proportional controls, a pothole protection system, a tilt sensor with automatic cut-out, an all-motion audible alarm, and an overload sensing system. Platform features include a GFI-protected 110V AC outlet, a half-height spring-hinged gate, fold-down hinged rails, and lanyard attachment points. Maintenance accessibility is supported by an on-board diagnostic interface, low-voltage battery protection, tie-down and lift lugs, and integrated forklift pockets. This equipment is being procured under a small business set-aside contract solicitation numbered W911S226U3296, issued by the Department of Defense through the office at Fort Drum, New York, with a response deadline of June 1, 2026, and is categorized under NAICS code 333120 for construction machinery manufacturing. Primary point of contact is Kevon Williams, reachable via email and phone provided in the solicitation.

General Info

Procurement of electric slab scissor lift with 37ft height, 550lb capacity, zero emissions, DoD small business set-aside.

Contract Value

$65,198

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

3709 Polk RdFt Campbell, Ky 42223, NY, 42223, USA

Set-Aside

SBA

Award Issued Date

Documents

1

W911S226U3296 - Electric Scissor Lift

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Office AddressFORT DRUM, NY, 13602-5220, USA

Full Description

Show more
minimum capabilities. The equipment type is an Electric Slab Scissor Lift with an electric drive type powered by a 24V DC power source. Its key capability is a narrow width of 32 inches, which is designed for tight indoor and outdoor spaces, and it is drivable at full extension height. It produces zero emissions, making it highly suitable for indoor use.The physical dimensions and measurements for this class of narrow-width lift are detailed as follows. It features a maximum working height of 37 ft 7 in (11.46 m) and a platform height of 31 ft 7 in (9.63 m). The lowered platform height measures 51 in (1.30 m). It has an overall width of 32 in (0.81 m), an overall length of 91.6 in (2.33 m), a stowed height with rails up of 94 in (2.39 m), and a stowed height with rails down of 79.5 in (2.02 m). The inside platform dimensions are 83 in x 27.5 in (2.10 m x 0.70 m), and it includes a roll-out extension deck of 3 ft (0.91 m). Additionally, the stowed ground clearance is 4.0 in (10.2 cm) and the wheelbase is 69 in (1.75 m).Operating capacities, speeds, and weight specifications define this models performance. The overall capacity is 550 lbs. (249 kg), split between a main platform capacity of 300 lbs. (136 kg) and an extension deck capacity of 250 lbs. (113 kg), with a maximum occupancy of 2 persons. The total machine weight is 5,850 lbs. (2,654 kg) and it has a gradeability of 25%. Its turning radius is 43 in (1.09 m) inside and 104 in (2.64 m) outside. Operating times under rated load are 55 to 60 seconds to lift and 47 to 55 seconds to lower. The drive speed is 2.0 mph (3.2 km/h) when stowed and 0.5 mph (0.8 km/h) when raised. It is equipped with 16 x 5 x 12 solid rubber, non-marking tires, and is capable of a maximum drive height at full height.Standard operational features and safety systems for this model type include several integrated mechanisms. For control and drive, it utilizes a variable speed electric drive, dual holding brakes, and proportional controls for drive and lift. Safety systems consist of a pothole protection system, a tilt sensor and alarm with drive and lift cut-out, an all-motion audible alarm, and an overload sensing system. Platform convenience features include a 110V AC outlet on the platform with GFI, a half-height spring hinged entry gate, a fold-down hinged railing system, and lanyard attachment points. For maintenance, it features an on-board visual interface with diagnostics, low voltage battery protection, tie-down and lift lugs, and forklift pockets.

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 334516
New
Federal
Nitrogen Content Analysis Equipment
Solicitation # W911S227U0056
Solicitation W911S227U0056 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new nitrogen content analysis equipment. This acquisition is a Total Small Business Set-Aside under NAICS code 334516. The government is seeking a high-end titration system and associated accessories, specifically requesting Metrohm USA Inc products or equals. Key required items include a 905 Titrando high-end titrator, an 801 Stirrer, an 800 Dosino dosing system, a Touch Control 900, and standard installation services. Only new equipment is acceptable, as used or remanufactured products are strictly prohibited. The contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. To be considered, offers of equal products must meet all salient physical, functional, and performance characteristics and include descriptive literature and model identification. Quotes must be submitted exclusively through the PIEE Solicitation module by October 29, 2026, and must include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. Preferred delivery is F.O.B. destination within 30 days. Invoicing and payments will be processed electronically via Wide Area Workflow.
Analytical Laboratory Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333243
New
Federal
FS5 Analyzer
Solicitation # W911S227U0072
Solicitation W911S227U0072 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of a Valmet FS5 Analyzer and associated accessories. This acquisition is a Total Small Business Set-Aside and is designated as brand name or equal. The required equipment is used to analyze fiber dimension, fines, coarseness, and curl, and must be provided as new equipment only. The scope of work includes the FS5 Analyzer system, measurement packages A, B, and C, and Clean Chem Dexonex 26. Key deliverables for the analyzer system include back-up image media, sample beakers, installation accessories, a measurement accuracy verification kit, a water treatment unit, and a manual defibrator. Quotes must be submitted exclusively through the PIEE Solicitation module to be considered responsive. Offerors are required to provide a price list, technical specifications, and a completed Attachment 1 regarding certifications and country of origin. Products from non-qualifying foreign countries will not be accepted. If an equal product is proposed, the offeror must provide descriptive literature and clearly identify the brand, model, and any modifications needed to meet the salient physical and functional characteristics of the Valmet system. The government will award the contract to the responsible offeror whose offer is most advantageous based on price and technical evaluations. Delivery is requested within 30 days on an F.O.B. destination basis.
Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
Federal
GOO GRINDER
Solicitation # W911S227U0079
Solicitation W911S227U0079 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of a Goo Grinder overhead reservoir system. This equipment is designed to accurately meter two-part materials using gear pumps and chain drives, featuring an output of up to 1.5 quarts per minute and a ratio range from 1:1 to 6:1. The system must support viscosities from 300 to 50,000 cps and includes two five-gallon reservoirs with drum feed. Key available options include air or electric drives, shot control, static mixer manifolds, heaters, and pneumatic footswitches. The procurement is a Total Small Business Set-Aside under NAICS code 333248, with the award based on the most advantageous offer considering price and technical factors. The government requires new equipment only, and the preferred delivery timeframe is within 30 days on an F.O.B. destination basis. This is a brand name or equal solicitation; any offered equal products must meet all salient performance characteristics and be supported by detailed descriptive literature and model identification. Offerors must submit their quotes via the PIEE Solicitation module and include mandatory documentation, including a completed Attachment 1 for the Buy American and Balance of Payments Program. Compliance with various FAR and DFARS clauses is required, including those regarding item unique identification, safeguarding covered defense information, and electronic payment via Wide Area Workflow.
All Other Industrial Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS