Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

SCISSORS, BANDAGE

Active
SPE2DS-26-T-444TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE2DS-26-T-444T is a request for quotations issued by the Department of Defense DLA Troop Support Medical Supply Chain for the procurement of one unit of extreme duty, serrated bandage scissors. The required scissors must be 7.5 inches in length, constructed from stainless steel with molded plastic finger rings, and capable of being heat sterilized up to 272 degrees Fahrenheit to cut through heavy cloth and zippered flight clothing. The item is identified by NSN 6515-01-598-9737 and falls under NAICS code 339112. Delivery is required within 20 days after receipt of the order, with the place of performance and delivery located at Fort Hood, Texas. The contract mandates that packaging be commercial and compliant with ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Each unit must be in a sealed container to prevent damage, and marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must comply with the Berry Amendment, the Buy American Act, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Quotations must be submitted via the DIBBS system by the deadline of September 22, 2026.

General Info

DOD seeks one 7.5-inch stainless steel bandage scissor for delivery to Fort Hood.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, USA

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-444T Request for Quotations

PDF19 pagesrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUSA

Full Description

Show more
SCISSORS,BANDAGE
SCISSORS,BANDAGE
SCISSORS, BANDAGE, FIELD TYPE; EXTREME DUTY; SERRATED;
LENGTH: 7.5 IN; STAINLESS STEEL; MOLDED PLASTIC FINGER
RINGS; HEAT STERILIZABLE UP TO 272 DEG F; CUTS HEAVY OR
MULTIPLE LAYERS OF CLOTH AND ZIPPERED FLIGHT CLOTHING.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DS-26-T-444T
SECTION B
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-598-9737 Quantity: 1 EA Purchase Request: 7018341017QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
HANDLE, CARRYING, PORTAB
Solicitation # SPE2DS-26-T-445E
Solicitation SPE2DS-26-T-445E, issued by the DLA Troop Support Medical Supply Chain, is for the procurement of 13 packages of carrying handles for portable ICU systems, specifically Reid grab handles with L-track (NSN 6515-01-711-0636). The items are issued in packages of two and must be delivered to Camp Lejeune within 20 days after receipt of the order. Bidders are required to specify the source and part number being supplied. The contract includes strict quality and shelf-life requirements, specifying a 60-month non-extendable shelf life for Type I (Code S) items. No more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. All labeling must adhere to the latest revision of Medical Marking Standard No. 1, including the manufacturer date, expiration or retest date, and the contract or lot number. Packaging must utilize suitable sealed unit containers in accordance with MIL-STD-2073-1E and DLA procurement requirements. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is governed by NAICS code 339112 and incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DIBBS system by September 22, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS