Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A6-26-T-05PGFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 1,433 machine screws identified by NSN 5305-01-078-2343 and part number NAS1801-3-6, manufactured in accordance with the current revision of the non-government standard NAS1801 Rev 4 dated 10/31/2012. Hardware produced prior to the solicitation date under earlier but then-current revisions of the standard is acceptable, but all new production must comply with the current revision. The screws are classified as a critical application item with no shelf life requirement, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Inspection and acceptance occur at origin under RQ009, with dimensional verification of all Class 3A and 3B threads conducted per System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. All packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking codes applied. Palletization adheres to DLA standards, and delivery is FOB origin with a 168-day lead time, targeted for delivery by January 6, 2027. The delivery destination is the DLA Distribution facility in New Cumberland, PA, and transportation follows DLA procedural notes C19 and C20. The unit of issue is each, with no variance allowed in quantity and total contract value derived from the listed unit price.

General Info

Procure 1,433 NAS1801-3-6 screws per Rev 4, FOB origin, delivery by Jan 6, 2027, to New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05PG.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BERNICE ADAMS
contact@example.gov

Full Description

Show more
SCREW,MACHINE
SCREW, MACHINE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-05PG
SECTION B
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1801 REVISION NR 4 DTD 10/31/2012 PART PIECE NUMBER: NAS1801-3-6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017454482 0001 EA 1,433.000
NSN/MATERIAL:5305010782343
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-05PG
SECTION B
PR: 7017454482 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/06/2027 Original Required Delivery Date:10/22/2026
SPE4A6-26-T-05PG NSN/Part Number: 5305-01-078-2343 Quantity: 1,433 EA Purchase Request: 7017454482QTY: 1433 Delivery: 168 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SPRING, HELICAL, COMPRESThis contract is for the procurement of 124 helical compression springs with NSN 5360015960957 and part number H05352M, supplied by OPW Fueling Components Inc. Division 81718. The item is designated as a critical application component, requiring strict compliance with source control drawing requirements; only approved sources may supply the item, and non-approved offerors must submit a Source Approval Request along with technical documentation or proof of prior approval directly to DLA. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standard including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for specific functional applications listed in NAVSEA guidelines, and mandates secondary containment for any portable devices containing mercury. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at destination, and the required delivery date is February 3, 2027, with a need ship date of January 5, 2027. The unit of issue is each, and all packaging details must align with the contract’s specified QUP and DLA standards. The item is to be delivered to Industries of the Blind Inc. in Greensboro, NC, and transportation is subject to DLAD Procurement Notes C19 and C20. The solicitation was issued under SPE7L1-26-T-829F and closed for responses on July 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, BAThe contract specifies the procurement of self-locking barrel nuts identified by NSN 5310012593592 and part number NAS577B10A, manufactured to meet technical standards referenced in NASM25027 Revision 1 and NAS577 Revision 18 dated April 30, 2021, with all requirements governed by the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application and must comply with stringent quality assurance provisions including QAP EQ003, RQ001, RQ011, RQ017, and RP001, which mandate tailored higher-level quality controls, removal of government identification from non-accepted supplies, physical identification of bare items, and specific packaging protocols. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verified levels or AQLs as defined. Packaging must follow ASTM D3951 and MIL-STD-129 labeling standards, with palletization compliant with DLA packaging requirements, and all units must be packed in accordance with the specified U/I and QUP. Two line items are included under solicitation SPE4A6-26-T-05NP, totaling 14 units at $2.00 each, with delivery due in 116 days from the order placement. Shipments must be FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Deliveries are split between Corpus Christi, Texas, and Warner Robins Air Force Base, Georgia, with a required ship date of November 15, 2026, and original delivery date of March 29, 2027. The contract enforces strict compliance with DoD unit of issue standards and transportation guidelines, and all technical, quality, and packaging directives take precedence over commercial standards. The primary point of contact is Antonia Willcox of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SELF-DRILLINGThe contract pertains to the procurement of 14 packages of self-drilling screws, identified by NSN 5305-01-572-0554 and McMaster-Carr part number 91632A194, under solicitation SPE4A6-26-T-05NV. Delivery is required within 103 days to the destination in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, and marking per MIL-STD-129 with no special marking required. Packaging and preservation must be free of mercury or mercury compounds, consistent with the prohibition in IP056, and palletization must conform to DLA packaging requirements. The screws must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and sampling for inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with zero non-conformances required unless otherwise stated. The contract stipulates that no mercury or mercury-containing substances may be intentionally introduced into the product or its packaging, with limited exceptions for specific functional uses such as batteries or sensors, all of which must adhere to NAVSEA 5100-003D containment guidelines. The contract further requires compliance with documentation protocols for source approval, and all materials must be free of government identification if rejected. Inspection and acceptance occur at the delivery destination, with the supplier responsible for meeting all packaging, labeling, and transportation directives as outlined in DLA procedural notes C19 and C20. The unit of issue is packaged (PG), and pricing is fixed at $14.00 per package for a total contract value tied to the 14-package quantity. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and the item falls under NAICS code 332722 for screw manufacturing. The point of contact for the procurement is Michael Blain of the ASC Commodities Division, Department of Defense, and all items must be delivered to the specified warehouse address in Tracy, California. The contract enforces strict adherence to quality, packaging, and environmental requirements, with no allowance for unauthorized deviations or substances.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThe contract pertains to the procurement of 70 plain hexagonal nuts identified by NSN 5310-01-493-3532 under solicitation SPE4A6-26-T-05PB, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware, except for functional uses in specified items such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. Quality conformance requires a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction, and Certificate of Quality Compliance documentation applies via CDRLs and DD Form 1423s, with all technical and quality requirements referenced in the DLA Master List. Manufacturers and non-manufacturers must comply with ISO 9001:2015 quality management standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, unless otherwise stated in the contract or technical documents. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may determine sample size, but acceptance requires zero non-conformances unless waived. Thread inspection for Class 3A and 3B threads must adhere to System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. All items must be marked in accordance with MIL-STD-130N for U.S. military property identification, and shipping must comply with DLA packaging requirements. Cybersecurity compliance requires either a CMMC Level 2 certified third-party assessment or a self-assessment, and the contract incorporates requirements for the protection of covered defense information. The nuts are procured fully competitively under a federal specification, with all technical data accessible only during the open solicitation period via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThe contract is for one self-locking nut, identified by NSN 5310-01-714-2609, under solicitation SPE4A6-26-T-05PY, issued by the Defense Logistics Agency's ASC Commodities Division. Delivery is required within 20 days after award, and responses must be submitted by July 21, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per applicable regulations. Sampling follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless otherwise stated. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including employees of foreign subsidiaries. Access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The place of performance is Mechanicsburg, Pennsylvania, and the primary point of contact is Charece Smith.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details