Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Secure Electronic Protection/Detection (EP/DD) Systems Architecture

Active

International

Response Deadline08/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a senior-level technical leader to design and implement Electronic Protection/Detection (EP/DD) systems for the Department of National Defence, focusing on architecture planning and system integration across multiple defense initiatives. The role requires deep expertise in EP/DD technologies, with responsibilities centered on developing scalable, secure, and interoperable system architectures that meet evolving operational needs within the Canadian defense ecosystem. The contractor will be expected to lead technical decision-making, coordinate with cross-functional teams, and ensure alignment with national defense standards and capabilities. Performance is expected to be conducted within the National Capital Region, reflecting the centralized nature of defense planning and coordination in Ottawa. The contract is structured as a subcontract under NAICS code 541330, indicating it falls under engineering services, and the submission window closes on August 7, 2026, with the opportunity posted on July 22, 2026. The Government of Canada is the contracting authority, and the work supports critical national security objectives through advanced electronic warfare and sensor protection systems.

General Info

Senior technical leader to design and implement EP/DD systems for Canadian National Defence in Ottawa by August 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 07:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide senior-level technical leadership in the design and implementation of Electronic Protection/Detection (EP/DD) systems for the Department of National Defence, including system integration and architecture planning across multiple defense projects.

Similar Contracts

Same NAICS industry code

Technical Data and Drawing ManagementThe contract requires the secure creation, control, and management of technical drawings, specifications, and process documentation for cable assemblies, with strict adherence to configuration control protocols and compliance with International Traffic in Arms Regulations and Export Administration Regulations. All technical data must be handled in a manner that ensures authorized access, prevents unauthorized dissemination, and maintains the integrity of controlled information throughout its lifecycle. The work is classified as a subcontract under NAICS code 541330, solicited by the ASC Commodities Division of the Department of Defense, with responses due by August 22, 2026. The performance location and specific point of contact are not detailed, but the requirement mandates rigorous data management practices aligned with federal defense standards. Participation is open to entities capable of meeting ITAR/EAR obligations and maintaining secure, auditable processes for technical documentation.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and Quality ComplianceThe contract requires execution of First Article Testing in strict accordance with the E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025) to verify full conformance to all specified technical data and to provide documented evidence of consistent and controlled manufacturing processes. This testing must demonstrate that the initial production units meet every design, performance, and quality criterion outlined in the technical documentation, ensuring that the supplier’s processes are capable of reproducibly delivering compliant products at volume. This is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, classified under NAICS code 541330, and is open exclusively to small businesses. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026. The place of performance and point of contact details are not specified, but the full solicitation can be accessed via the provided DIBBS link, and all submissions must comply with the requirements for certification of process control and technical compliance as mandated by the referenced E08 standard.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery Indefinite Quantity (IDIQ) contract for its major construction initiatives. These services span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on supporting delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery strategies. Contractors will be expected to ensure projects meet defined schedules, budgets, and quality standards while assisting the Port in achieving its infrastructure objectives. The contract is classified under NAICS code 541330 and is open to firms capable of delivering high-level construction management expertise across a diverse portfolio of port-related developments. The primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 23, 2026, and interested parties can access further details through the Port’s official portal. While no set-aside type has been specified, the opportunity is targeted at firms with demonstrated experience in managing complex public infrastructure projects.

Construction Management

POSTED

about 12 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment. Efforts will center on diagnosing and resolving system inefficiencies to enhance performance, energy efficiency, occupant comfort, reliability, and equipment longevity while ensuring strict compliance with safety and regulatory mandates. Scope includes assessment and optimization of mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems, with work initiated and directed through formal Service Directives issued by Aviation Facilities and Infrastructure. Collaboration with AV/F&I is mandatory to meet all project objectives and deliverables. The contract is structured as an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330 with the Port of Seattle as the contracting agency. Primary point of contact is Jason Gates, reachable via phone or email, with Jim Farris serving as the project manager. The solicitation was posted on July 23, 2026, and all work will be performed at the airport. No set-aside designation has been specified, and the contract will be managed through the Port of Seattle’s procurement portal.

Aviation Facilities & Infrastructure

POSTED

about 12 hours ago

DEADLINE

FY26-DDOT-TPA-Streetcar PMCThe contract anticipates support for Streetcar 2.0 and its integration with connectivity infrastructure at RFK, focusing on planning, coordination, and implementation efforts to enhance public transit functionality in the District of Columbia. This forecasted procurement under the Department of Transportation (DDOT) is positioned for fiscal year 2026 and is intended to secure services that ensure seamless operational alignment between the expanded streetcar system and key transit hubs, particularly around the RFK site. The effort will likely involve technical oversight, system compatibility testing, and coordination with regional mobility initiatives to improve transit accessibility and efficiency. While specific financial details, timelines, or vendor requirements are not yet defined due to the forecast nature of the posting, the initiative signals a commitment to advancing sustainable urban transportation by expanding the streetcar network and linking it to major transportation nodes. The work will be performed within the District of Columbia, and while no set-aside provisions or NAICS codes are specified, the procurement is expected to involve specialized contractors with expertise in transit infrastructure, signal integration, and systems engineering. Stakeholder engagement and compliance with local transit goals will be critical components as the project moves from forecast to active solicitation.

Transportation (DDOT)

POSTED

about 12 hours ago

DEADLINE

FY26 -DOEE-WPD-Automated Rain Barrel ProtypeThe District of Columbia’s Department of Energy and Environment is forecasting a contract opportunity to design, build, and test a prototype automated rain barrel system that will discharge collected stormwater automatically prior to an anticipated storm. The goal is to create a smart, residential-scale solution that increases the capacity of rain barrels to capture more runoff during heavy rainfall events by preemptively emptying them, thereby enhancing stormwater management and reducing urban flooding. The prototype must be reliable, user-friendly, and suitable for widespread residential deployment, incorporating sensors or weather data integration to trigger discharge cycles based on forecasted precipitation. The project is part of FY26 planning under the DOEE’s Water and Pollution Division and is intended to support broader environmental resilience initiatives in the District. While specific funding details, timeline, and technical requirements have not yet been released, the solicitation is anticipated to seek proposals from innovators with expertise in IoT devices, hydrology systems, and environmental engineering. The prototype will be evaluated on functionality, durability, scalability, and potential for integration with municipal weather monitoring systems. Performance validation will include real-world testing under simulated storm conditions to ensure the system consistently and safely empties the barrel before rain arrives without causing overflow or infrastructure stress.

Energy and Environment (DOEE)

POSTED

about 12 hours ago

DEADLINE

FY26-DDOT-IPMA-Rehabilitation of the Mall Tunnel (TN#1142)The contract pertains to the preliminary engineering design phase, accounting for 30 percent of the total work, for the rehabilitation and repair of the Mall Tunnel designated as TN#1142 in Washington D.C. This phase is grounded in the findings of an inspection conducted between April 7 and April 24, 2024, which provided specific recommendations for addressing the tunnel’s structural and operational deficiencies. The design work will translate those inspection results into actionable engineering plans to prepare for full-scale rehabilitation efforts. The contract is listed under the District of Columbia Department of Transportation’s forecast for fiscal year 2026, with a posted date of July 23, 2026, indicating it is an anticipated procurement rather than an active solicitation. No solicitation number, set-aside details, or NAICS code are currently provided, and the place of performance is associated with the tunnel’s location in the District of Columbia, though specific address details are not listed. The procurement is managed by the District’s transportation agency with no publicly identified point of contact.

Transportation (DDOT)

POSTED

about 12 hours ago

DEADLINE

FY26-DDOT-TBSA-Work Zone Design and Work Zone Safety Transportation Management ProgramThe District of Columbia Department of Transportation is forecasting a contract for the FY26 Work Zone Design and Work Zone Safety Transportation Management Program, aiming to enhance the safety and efficiency of work zones across the city’s transportation infrastructure. This initiative will focus on developing and implementing comprehensive design standards and management strategies that minimize disruptions, protect workers and the public, and ensure seamless traffic flow during construction and maintenance activities. The program is expected to involve advanced planning, engineering expertise, and coordination with multiple stakeholders to align with evolving safety regulations and industry best practices. Although specific details such as funding amounts, contract duration, and selection criteria are not yet finalized, the solicitation is positioned as a forecast with a posted date of July 23, 2026, indicating it is a precursor to a formal procurement process. The work will be performed within the jurisdiction of the District of Columbia, with performance location and other administrative specifics yet to be determined. Interested parties should monitor official channels for the upcoming formal solicitation, as this forecast signals the agency’s intent to secure qualified contractors with specialized experience in transportation management systems, work zone safety protocols, and intelligent infrastructure design.

Transportation (DDOT)

POSTED

about 12 hours ago

DEADLINE

FY26-DOEE-WPD-Large Scale End-of-Pipe Stormwater ProjectThe District of Columbia’s Energy and Environment Agency is forecasting a contract for the feasibility study and design of a large-scale end-of-pipe stormwater project scheduled for fiscal year 2026. This initiative aims to address stormwater management through engineered solutions at critical discharge points, likely targeting urban runoff reduction, water quality improvement, and compliance with environmental regulations. The project will require detailed planning, technical analysis, and design development to ensure scalability, environmental suitability, and long-term operational effectiveness. Although no solicitation number or NAICS code has been provided yet, the forecast indicates the agency is preparing for a formal procurement process that will seek qualified contractors with expertise in civil engineering, hydrological modeling, and stormwater infrastructure. The place of performance is in the District of Columbia, with work expected to focus on specific end-of-pipe locations requiring intervention. The posting date reflects an early-stage forecast, allowing potential bidders time to review requirements and prepare proposals ahead of an anticipated solicitation. All further details including submission guidelines, evaluation criteria, and deadlines will be released through an official solicitation.

Energy and Environment (DOEE)

POSTED

about 12 hours ago

DEADLINE

FY26-DOEE-WPD-Kenilworth Park Wetland Restoration EA/DesignThe contract pertains to environmental assessment and design services for wetland restoration projects within Kenilworth Park in the Anacostia watershed, scheduled for fiscal year 2026 under the District of Columbia’s Department of Energy and Environment. The work will focus on planning and engineering activities necessary to restore and enhance the ecological function of the wetland areas, addressing habitat degradation, water quality, and natural resource conservation. The project is a forward-looking forecast, indicating future procurement activity, with no solicitation number yet assigned and no set-aside provisions specified, suggesting open competition for qualified firms with expertise in environmental engineering and ecological restoration. The location of performance is tied to Kenilworth Park in the District of Columbia, though precise address details are not provided in the posting. The agency responsible is the District of Columbia’s Energy and Environment (DOEE), which seeks to advance regional environmental resilience through this initiative. No point of contact information is listed, and the notice was posted on July 23, 2026, with an official link directing interested parties to the District’s contracting portal for updates. This forecast serves as an early indicator for potential bidders to prepare proposals aligned with regulatory requirements and ecological restoration best practices for federally and locally significant wetland systems.

Energy and Environment (DOEE)

POSTED

about 12 hours ago

DEADLINE

FY26-DDOT-TSA-Traffic Signal System Modernization System Management (Engineering Services)The District of Columbia Department of Transportation is planning a comprehensive modernization of its traffic signal infrastructure through a citywide deployment of advanced traffic signal controllers and a new central management system. This initiative aims to replace all existing legacy controllers with next-generation hardware capable of integrating emerging transportation technologies to enhance traffic flow, reduce congestion, and improve safety for all road users including pedestrians, cyclists, and public transit. The project encompasses both hardware upgrades and the implementation of a centralized software platform to monitor, manage, and optimize signal timing dynamically across the entire city network, increasing operational efficiency and infrastructure return on investment. Engineering services will be required to support the design, integration, testing, and deployment of this modernized system, ensuring seamless interoperability with existing transportation networks and future-proofing the city’s traffic management capabilities. The effort is scoped to deliver comprehensive improvements in multimodal mobility, with a focus on reducing delays, lowering emissions, and supporting equitable access to transportation. While specific procurement details such as set-aside status or NAICS code are not yet defined, the forecasted contract is anticipated to trigger formal bidding in FY26, with work performed citywide under the oversight of DDOT.

Transportation (DDOT)

POSTED

about 12 hours ago

DEADLINE

FY26-DDOT-TPA-Ped/bike Connection Across I-295/CSX Corridor Along East Capitol St. Alignment ProjectThe District of Columbia Department of Transportation is forecasting a feasibility study for a pedestrian and bicycle connection across the I-295 and CSX rail corridor along East Capitol Street. This project aims to evaluate viable alignment options to safely link communities on either side of the highway and rail line, enhancing nonmotorized transportation options and improving regional connectivity. The study will assess engineering, environmental, and community impacts to determine the most practical and beneficial design approach for a future multimodal crossing. The contract is scheduled for release in fiscal year 2026 and is managed under DDOT’s Transportation Planning and Analysis division. No solicitation number or set-aside details are provided at this stage, and the forecast is intended to give potential contractors and stakeholders advance notice to prepare proposals. The place of performance is expected to be within the District of Columbia, focused on the East Capitol Street corridor, with no specific office address or point of contact listed yet. The forecast provides a general timeline and scope to encourage early engagement and planning in advance of formal procurement.

Transportation (DDOT)

POSTED

about 12 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)The Department of National Defence is seeking a qualified supplier to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle (LAV) with a maximum weight of 45,000 lbs, under solicitation W8486-270848/A. The contract is valued at a ceiling of $1,200,000, with funding allocated as $500,000 for fiscal year 2026/27 and $700,000 for fiscal year 2027/28, and all payments are on a cost-reimbursable basis, exclusive of applicable taxes but inclusive of customs duties and delivery expenses. The work must be completed no later than March 20, 2028, with deliverables tied to milestone payments including a Project Schedule, High-Level Mandatory Requirements and Mission Profile, 3-D CAD designs, SWaP analysis for 4x4, 6x6, 8x8, and tracked configurations, and a Final Project Report aligned with specified Contract Data Requirements. The solicitation requires offers to be submitted in three sections: Technical, Financial, and the Offer Submission and Declaration Forms, with mandatory certification of Business Number, compliance with the Ineligibility and Suspension Policy, and adherence to the Code of Conduct for Procurement. No supplier security clearance is required, and the contractor must maintain detailed records of all costs and expenditures for audit purposes. Evaluation of proposals will be based on a combination of pass/fail mandatory criteria and weighted technical factors totaling a maximum of 220 points, with a minimum score of 130 required to be considered responsive. The top technical evaluation factors include Project Management Professional certification (15 points), demonstrated experience in at least three relevant projects (30 points), and experience with specific military vehicle platforms such as 4x4, 6x6, 8x8, or tracked (unspecified weight). The technical proposal must directly address all evaluation criteria in the order listed, and all submissions must be signed and submitted via the SAP Business Network portal before the closing date of August 5, 2026. Only qualified supply arrangement holders will receive the RFP directly; it is not accessible through CanadaBuys. The contract includes clauses covering government property, access to information, accounts and audit, insurance, termination for convenience or default, and proactive disclosure of contracts with former public servants. Invoices for payment must

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 23 hours ago

DEADLINE

Multiple Victoria-Class Spares : PILGRIM NUT INFLATABLE TIRE, DISK,VALVE, PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT, PACKING,PREFORMED and STUD,SHOULDEREDThe Department of National Defence is seeking spares in support of the Victoria-class submarines through solicitation W8482-275278/A, with deliverables required at Canadian Forces Base Esquimalt and Canadian Forces Base Halifax. The procurement includes six line items: a parts kit for mechanical equipment seal replacement, preformed packing, and four shoulderered stud variants, with specific quantities and part numbers designated for each. All items must be new and conform to the latest issued drawings and specifications, with items 1 and 2 requiring at least 75 percent of their 84-month authorized shelf life remaining upon delivery. Packaging and marking must strictly follow Canadian Forces standards, including individual packing per D-LM-036/SF-000 for items 1, 3, 4, 5, and 6, and specific labeling for item 2 and rubber components per D-LM-008-026/SF-001. Shipments exceeding 0.566 m³ or 15.88 kg must be palletized on standard 1.22m x 1.02m wood pallets conforming to ISPM 15, and all documentation must accompany the shipment, including a bill of lading, original invoice, and packing slip with item, part, and contract details. Delivery is governed by FCA Incoterms 2020, with the contractor bearing all risks and costs until delivery to the contracted location, and excessive goods are not payable by Canada. Compliance with ISO 9001:2015 is mandatory for line items 5 and 6, while a quality system based on ISO 9001:2015 is recommended for items 1 through 4. Contractors proposing substitutes must declare the brand, model, part number, and NCAGE. All deliveries must be accompanied by a Certificate of Conformity per NATO STANAG 4107 for foreign-based contractors or DD Form 250 for U.S.-based contractors, with release documents distributed to the consignee, contracting authority, NDHQ, and QAR. Payment is via electronic transfer, direct deposit, or wire transfer, with undisputed invoices settled within 30 days and a 15 percent withholding tax applied to non-residents. The contracting authority is Alexandre Branco-Sauvageau, and offers must be submitted electronically via PWGSC’s

POSTED

about 23 hours ago

DEADLINE

in about 2 months

Universal Joint Spares for Halifax Class Deck and Hull EquipmentThe Department of National Defence is seeking suppliers to provide universal joint spares for Halifax-class deck and hull equipment under solicitation W8482-265029/A, with a response deadline of August 5, 2026. The procurement requires four line items: 15 vehicular universal joints (Part Number S50075-512, NCAGE 72166) for CFB Halifax, 14 identical units for CFB Esquimalt, 9 geared nonvehicular universal joints (Part Number VCK-1300, NCAGE 6S506) for CFB Halifax, and 9 identical units for CFB Esquimalt, all to be delivered in accordance with the Annex Statement of Requirement. The contract is conditionally restricted to Canadian suppliers and trading partners under reciprocal procurement policy. Bidders proposing substitute or equivalent products must provide full technical specifications, descriptive literature, and compliance statements demonstrating equivalency in form, fit, function, quality, and performance, and must clearly reference applicable sections of the requirement. Canada reserves the right to request physical samples for verification. All items must comply with U.S. MIL-STD-2073 and MIL-STD-129, NATO TL8100-0100 standards at minimum packing level C, and Canadian Forces Packaging Specification D-LM-008-036/SF-000, with manufacturer names, part numbers, and specification numbers stamped or etched directly on each item and barcodes applied according to D-LM-008-002/SF-001. Dangerous goods must be labeled and packaged in full compliance with the Transportation of Dangerous Goods Act and Hazardous Products Act, with bilingual Safety Data Sheets provided and hazardous volume percentages clearly marked. Offers must be submitted electronically via CPC Connect with the solicitation number included in the message field and are required to be structured in three sections: technical, financial, and forms, including the completed Annex Offeror Submission Details, Annex Offer Submission Form, and Offeror Declaration Form. The basis of award is lowest evaluated price on an item-by-item basis, with compliance to mandatory technical criteria as a pass/fail gate; failure to meet these results in non-compliance. Payment terms stipulate settlement of undisputed invoices within 30 days of receipt in proper format, with invoices requiring detailed line items, quantities, unit prices, contract and client reference

POSTED

about 23 hours ago

DEADLINE

End-User Certificate & Export Compliance ServicesThe contract involves the preparation and submission of End User Certificates for dual-use or export-controlled items that are restricted to use exclusively by the Canadian Armed Forces. This subcontract requires the contractor to ensure full compliance with Canadian export control regulations and to accurately document the end-use and end-user information to support lawful international transfers of sensitive goods. All activities must align with the stringent requirements imposed by the Government of Canada to safeguard national security and adhere to international non-proliferation obligations. Performance of the contract is expected to occur in British Columbia and Nova Scotia, with a submission deadline of August 6, 2026, and the solicitation was posted on July 22, 2026. The work falls under NAICS code 541611, which categorizes it as administrative management and general management consulting services, reflecting the need for procedural expertise and regulatory insight rather than physical delivery of goods. The contracting authority is the Department of National Defence under the Government of Canada, and compliance with all export control frameworks is mandatory to fulfill contractual obligations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Canadian Content Certification & Industrial Benefits ComplianceThe contract requires the verification and documentation of Canadian content for goods supplied to ensure full compliance with the Department of National Defence’s procurement policies and industrial benefits obligations. Suppliers must demonstrate that the products meet specified Canadian content thresholds and provide detailed records to substantiate domestic manufacturing, assembly, or value addition. This obligation is critical to fulfilling the government’s industrial and technological benefits requirements tied to defense contracts, ensuring economic return and support for Canadian industry. Performance is expected across British Columbia and Nova Scotia, with submissions due by August 6, 2026, and the solicitation falls under NAICS code 541611, indicating a focus on management, scientific, and technical consulting services related to compliance and certification. The contract is structured as a subcontract and issued under the Government of Canada’s procurement framework, with all documentation tied to verifying and certifying the origin and composition of supplied goods to align with national defense and economic development objectives.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Logistics & Controlled Goods TransportationThe contract involves the secure transportation and delivery of goods to Department of National Defence sites within British Columbia and Nova Scotia, requiring strict adherence to handling protocols for controlled, protected, or classified materials. All logistics operations must comply with elevated security standards to ensure the integrity and confidentiality of sensitive cargo throughout transit, from pick-up to final destination. The provider must demonstrate proven capability in handling classified materials, including approved personnel, secure vehicles, verified chain-of-custody procedures, and compliance with government-mandated security clearances and documentation requirements. Subcontractors bidding on this opportunity must respond by August 6, 2026, under the North American Industry Classification System code 484220, which pertains to truck transportation of special freight. The work is tied directly to Government of Canada defense operations, with performance limited to specified locations in British Columbia and Nova Scotia. Bidders are expected to align with federal security policies and provide evidence of infrastructure, training, and accountability measures that meet the stringent demands of transporting national security-sensitive cargo. Failure to comply with protocols may result in contract termination and legal consequences.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Quality Assurance & Inspection ServicesThe contract seeks independent verification services to ensure delivered components meet ISO 9001:2015 quality standards, specified shelf life requirements, and all contractual obligations, with the possibility of origin inspections to confirm authenticity and compliance. The work involves rigorous assessment of components at various stages to validate adherence to technical and quality specifications established by the Department of National Defence. This subcontract is issued under NAICS code 541380 and is open for responses until August 6, 2026, with performance expected to take place in British Columbia and Nova Scotia. The Government of Canada, through its Department of National Defence, is seeking qualified third-party providers capable of delivering impartial, documented verification services to uphold defense supply chain integrity, with no set-aside preferences indicated. Proposals must be submitted through the official tender portal by the stated deadline.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Electromechanical Components (e.g., AC Motors)The contract is for the procurement and delivery of new electromechanical components, including alternating current motors, that must meet technical compliance standards and be identified by either National Stock Number or manufacturer-specific part numbers. It is issued as a subcontract under the Department of National Defence, Government of Canada, with the North American Industry Classification System code 335311, indicating a focus on electric motor and generator manufacturing. The solicitation is open to suppliers capable of providing parts that adhere to rigorous military or defense technical specifications, with performance expected to take place in British Columbia and Nova Scotia. The opportunity was posted on July 22, 2026, and responses must be submitted by no later than 7:00 PM Eastern Time on August 6, 2026. All deliveries must align with the required NSN or manufacturer part identifiers to ensure compatibility with existing systems.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Technical Advisory & Strategic IT Planning for Defense InfrastructureThe contract seeks a subcontractor to provide strategic IT planning and advisory services aimed at aligning technology solutions with the long-term infrastructure objectives of the Department of National Defence’s Director Project Delivery Command and Control. The focus is on ensuring that all technological initiatives support interoperability across systems, scalable architectures capable of evolving with future needs, and strict adherence to security compliance standards critical to national defense operations. The work is centered in the National Capital Region and requires deep expertise in defense-oriented IT environments, with an emphasis on delivering high-level guidance that informs decision-making and architecture development over time. The opportunity is classified as a subcontract under NAICS code 541512, reflecting its nature as a professional, scientific, and technical service related to computer systems design. The solicitation was posted on July 22, 2026, with a response deadline of August 7, 2026. While no set-aside provisions or specific eligibility criteria are outlined, the contract is issued by the Government of Canada through the Department of National Defence and is exclusively available through the CanadaBuys procurement portal. The nature of the work demands a vendor with proven experience in federal defense IT ecosystems and the ability to operate within stringent governmental security and operational frameworks.

Computer Systems Design Services

POSTED

DEADLINE

Quality Assurance and Conformity DocumentationThe contract requires performing comprehensive inspection, testing, and documentation activities to verify that products meet specified conformity standards, with a strict emphasis on issuing Certificates of Conformity aligned with CF 1280 or STANAG 4107 requirements. All testing procedures must be thoroughly documented and maintained in a traceable format to ensure full accountability and regulatory compliance throughout the product lifecycle. The work is tied to government procurement standards and demands precision in adherence to international defense-related quality protocols. This subcontract is issued by the Department of National Defence under the Government of Canada, with performance required in British Columbia and Nova Scotia. The solicitation was posted on July 22, 2026, and responses must be submitted by August 6, 2026. The NAICS code 541330 indicates the work falls under professional, scientific, and technical services related to analytical testing and quality assurance. The contract does not specify a set-aside type and does not list a point of contact, but the official tender portal provides the sole source for application details.

Engineering Services

POSTED

DEADLINE

Packaging, Labeling, and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services for defense-related shipments, fully compliant with MIL-STD-2073, MIL-STD-129, TL8100-0100, and D-LM-008-011/SF-001 standards. This includes proper handling of hazardous materials, precise palletization techniques, and all associated documentation to meet stringent military and regulatory requirements. The work must ensure end-to-end compliance for logistics operations, with attention to durability, traceability, and safety throughout the supply chain. The opportunity is issued as a subcontract under the Department of National Defence, Government of Canada, with a posting date of July 22, 2026, and a deadline for responses on August 6, 2026. The NAICS code 561910 categorizes this as other support activities for transportation. Performance is expected to occur in British Columbia and Nova Scotia, with no specific city or postal details provided. The solicitation does not indicate a set-aside designation, and the full scope demands adherence to international defense packaging protocols under a Canadian government procurement framework.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Precision Screw Assortments (Bolts) – CFB EsquimaltThe contract calls for the supply of 15 units of RUPEX bolts or an approved substitute that meets all specified technical requirements, including compliance with detailed standards for packaging, labeling, and product integrity. These bolts are to be delivered to CFB Esquimalt in British Columbia, ensuring alignment with the operational needs of the Department of National Defence. The solicitation is classified as a subcontract under NAICS code 332722, indicating the industrial classification for screw, nut, and bolt manufacturing, and is issued by the Government of Canada through its defense procurement channels. Responses must be submitted by August 6, 2026, at 7:00 PM Eastern Time, following the posted deadline for this opportunity, which was made available on July 22, 2026. While the precise address for the issuing office is not provided, the place of performance is clearly identified as British Columbia, with the delivery point being the military facility at CFB Esquimalt. The contract does not specify a set-aside classification, meaning it is open to all qualified suppliers without preference for small, Indigenous, or other designated businesses. All submissions must adhere strictly to the technical and logistical stipulations outlined to ensure acceptance and timely fulfillment.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE